CUCM8.5 VMware Workstation Installation Failed - No Deployments Provided

Dear Sir,
When I tried to install CUCM8.5 into VMware workstation 7.01, the attached error came out. Could you please help to check how to fix this problem? Thanks a lot.
Regards,
Alan

OVA Template Details for Unified CM Release 8.5
http://docwiki.cisco.com/wiki/OVA_Template_Details_for_Unifed_CM_Release_8.5
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

VMWARE Server2012RT Installation failed with option: I will install the Operating System later

Hello, first sorry for my englich but I hope it wille ok for this Issue.
I have instelled the Win2012RT Server in VMware but the Installtion failed with this error:
Ok i chose the option: "I will install the Operating System later.",
and also tried
this:
http://www.techieshelp.com/server-2012-windows-cannot-read-the-setting-from-the-unattend-answer-file/
However, I always get
this displayed:
Last Log entry is this one:
2014-05-07T09:42:03.962+02:00| vmplayer| I120: VMMgr: Finished opening VM at /vm/#cf2324dcf779001d/ from G:\VMs\Server2012RTVmware.vmx
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: main UI rect: 687x619 @ 948,249
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: Found 0 present screens
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: Windows for extra guest monitors will not be shown
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: setting main view to all displays
2014-05-07T09:42:03.978+02:00| vmplayer| I120: SnapshotTree: Emitting refresh (G:\VMs\Server2012RTVmware.vmx)
2014-05-07T09:42:04.009+02:00| vmplayer| I120: VMHSVMCbPower: G:\VMs\Server2012RTVmware.vmx, Setting state of VM to powerOn with option soft
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Stats VMX "G:\Programme2tePlatte\vmware-vmx-stats.exe" not found. Using standard VMX "G:\Programme2tePlatte\x64\vmware-vmx.exe"
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Starting vmx as G:\Programme2tePlatte\x64\vmware-vmx.exe
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Starting vmx as G:\Programme2tePlatte\x64\vmware-vmx.exe
2014-05-07T09:42:04.024+02:00| vmplayer| I120: VigorClient_StartAndConnect Failed: Message
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Pending power op found, completing.
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Clearing execReqPath
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Reloading config state.
2014-05-07T09:42:04.024+02:00| vmplayer| I120: VMHS: Transitioned vmx/execState/val to poweredOff
2014-05-07T09:42:04.040+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: VMHSStartVmxVigorCb: vmPath=/vm/#cf2324dcf779001d/ status=error
2014-05-07T09:42:04.040+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Reloading config state.
2014-05-07T09:42:04.040+02:00| vmplayer| I120: VMHS: Transitioned vmx/execState/val to poweredOff
2014-05-07T09:42:04.040+02:00| vmplayer| I120: Setting power state poweredOff
2014-05-07T09:42:04.056+02:00| vmplayer| I120: Internal VMDB error: VMDB failure (-1)
2014-05-07T09:42:04.056+02:00| vmplayer| I120: VMMgr::CloseVM: closing VM at /vm/#cf2324dcf779001d/
2014-05-07T09:42:04.056+02:00| vmplayer| I120: DlgUI: Error while powering on: Internal error.
2014-05-07T09:42:04.087+02:00| vmplayer| I120: VMMgr::OnVMDestroyed: cleaning up after destroyed VM at /vm/#cf2324dcf779001d/
2014-05-07T09:42:04.087+02:00| vmplayer| I120: cui::MKS::SetAttached: detach
2014-05-07T09:42:04.087+02:00| vmplayer| I120: cui::MKS::OnSetAttachedCompleted
2014-05-07T09:42:04.118+02:00| vmplayer| I120: FILE: FileDeletionRetry: Non-retriable error encountered (C:\Users\Michael\AppData\Roaming\VMware\preferences.ini~): Unknown error 2 (0x2) (2)
2014-05-07T09:42:07.488+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=1
2014-05-07T09:42:09.874+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=0
2014-05-07T09:44:13.286+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=1
2014-05-07T09:44:13.473+02:00| vmplayer| I120: Cmd /host2/#_client/util/file/cmd/##135/op/stat/ failed: Invalid path
2014-05-07T09:44:17.061+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=0
Does anyone have
an idea maybe??
Vmware Version is: 6.0.2 build-1744117
Host: Windows 7 Enterprise, 64-bit 6.1.7601, Service Pack 1
WIN2012RT Iso is: 9600.17050.WINBLUE_REFRESH.140317-1640_X64FRE_SERVER_EVAL_DE-DE-IR3_SSS_X64FREE_DE-DE_DV9.ISO DOWNLOAD: http://technet.microsoft.com/de-de/evalcenter/dn205286.aspx

Ok. I could finde out the Problem.
I uninstalled VMware witht RevoUninstaller and deleted all Vmware sysfolders and all regKeys.
Important note:
The first Installtion was on the 2nd Hard disk on my PC. These Harddisk was Connected via USB3 Port. VMware was successfully installed, and via the standart installation procedure the ISO files could be installed in Vmware, but the problem persist with
WIN2012RT server.
After a new installation of VMware into the Local C: Drive. The Win2012RT.Iso could be installed. With this procedure
without Issues: http://www.techieshelp.com/server-2012-windows-cannot-read-the-setting-from-the-unattend-answer-file/
ISO Download: http://technet.microsoft.com/de-de/evalcenter/dn205286.aspx

VMware tools installation fails

Hi,
I decided to try out Arch Linux in VMware Player before installing it on my system. The installation so far has gone well but I can't succeed in installing the VMware tools services. During installation I get several errors and warnings. These are the errors:
depmod: ERROR: Module 'hci_vhci' has devname (vhci) but lacks major and minor information. Igonring.
The above error seems not to be critical. But then I get another error when stopping Thinprint and VMware tools though all activities complete successfully:
sh: : command not found
sh: : command not found
Then I get the following errors at the end of the installation:
depmod: ERROR: Module 'hci_vhci' has devname (vhci) but lacks major and minor information. Igonring.
Warning: This script could not find mkinitrd or update-initramfs and cannot remake the initrd file!
depmod: ERROR: Module 'hci_vhci' has devname (vhci) but lacks major and minor information. Igonring.
VM communication interface socket family:[ 2530.549324] vmci: exports duplicate symbol vmci_context_get_priv_flags (owned by vmw_vmci)
Guest operating system daemon:
Unable to start services for VMware Tools
Execution aborted.
I have Linux kernel 3.13.5-1-ARCH (x64) on VMware Player 6.0.1 build-1379776 running atop Debian 7 with kernel 3.12.0.bpo.1-amd64. I have also the latest version of VMware tools.

I uninstalled the VMware Tools that I had before. Then I installed wget and ran:
wget https://aur.archlinux.org/packages/vm/vmware-tools/vmware-tools.tar.gz
tar -xvzf vmware-tools.tar.gz
cd vmware-tools
makepkg -s --asroot
pacman -U vmware-tools.pkg.tar.xz
exit
umount /mnt
reboot
No errors were reported but unfortunately it doesn't work. If I run ifconfig, I can only see the loopback interface. VMware Player doesn't detect any version of VMware Tools installed.
Last edited by trifud (2014-03-02 18:50:05)

VCS ova import fails VMware workstation 8

Hello all,
I was recently surprised and excited by the release of the virtual VCS and set out installing!!
Using VMware workstation 8 I imported the VCS ova file, VMware waits for a while then displays a massive agreement screen which cannot be moved to find the agree screen. The only option to remove this massive browser screen is to alt f4, this then ends the import and the VCS installation fails.
Can anyone please advise if it is possible to run the VCS on workstation 8?
(ESXI is not an option as I'm attempting to install on a desktop and esxi doesn't recognise IDE and sata as storage)
I'm really wanting to get this working ASAP for my personal development and testing so any assistance would be greatly appreciated.
Thank you

For production its anyhow the only way to go.
For labbing, if you google a bit then you can find how to run esxi under vmware desktop or fusion.
I would also not exclude that with some modding you could run the ova on other virtualization
platforms than esxi, but thats anyhow not supported.
Please remember to rate helpful responses and identify helpful or correct answers.

CUCM 8.6 Installation on VMWare Workstation 9.X On windows 2008 R2

Hi
Iam trying to intall CUCM 8.6 on Vmware 9
i get installation fail, I have attached screenshot for your reference
what iam doing wrong ? is this possible to intall Windows 2008 R2 and Vmware 9 workstation ?
any advice will be helpfull to solve my issue.
OS : windows 2008 R2 64bit
Vmware : 9 workstation
Ram: 16GB
HDD : SATA 1TB
Processor : Xeon Quad Core.
Thanks
Balaji

Hi,
The host OS should not matter as that will not be visible to CUCM's hardware detection script, it's more likely that the guest OS choice (i.e. which variant of Redhat Linux) or physical CPU may not be compatable.
Normally when instaling CUCM you would use an OVA Tempalte when creating a CUCM VM using ESXi:
http://software.cisco.com/download/release.html?mdfid=283782839&flowid=26422&softwareid=283088407&release=8.6(1)&relind=AVAILABLE&rellifecycle=&reltype=latest
This has the the exact guest OS settings CUCM Expects, you could carry on with trial and error to see if you can homefully get the correct settings. The following information from the Cisco Wiki on virtualising CUCM may be a useful reference:
http://docwiki.cisco.com/wiki/Unified_Communications_VMware_Requirements
Personally I recomend you bite the bullet and use ESXi, the free variant works a treat with CUCM, the main issue may be if your hardware is in-compatable (i.e. ESXi does not have the built-in drivers).
Thanks
Stephen Welsh
CTO
http://www.unifiedfx.com

Cisco ISE installation on VMware Workstation ?

I am trying to install Cisco ISE image through Vmaware Workstation , but after starting VM getting redhat console but not the same console required for setup of actual ISE . Would like to know whether VMware workstation supported for ISE installation as all the cisco docs specifies the image to be mounted on ESX server, then login to client to run setup.. Please help...

Cisco "Officially" supports VMWare's ESXi/vSphere platform. Yes, ISE works in VMWare Workstation, but is not tested on every hardware platform available, therefore, not supported. The the case mentioned above,
I've started installing ISE 1.2 (redhat linux 5 64 bit) , looking at the posts above.. on VMware workstation 9..
1stly I gave 6gb ram ( my laptop has 6 gb ram & 290gb free space ) and started the installation process..
then after the starting stage of checking the requirements of my laptop started and the formatting of the disk began , my lap became very slow & it got hanged there..all my pc processes moved like snails..!! got frustated..
then I restarted my lap and this time I gave 4gb ram .. and it worked fine from then on..
can anyone tell me , if this has to do anthing with the physical memory we give over there in the ise installtion process..does it actually use the entire ram we mention over there..??
Niklas
All possible System RAM was allocated to the ISE VM, and the ISE VM used ALL of the RAM leaving none for the host OS, thereby slowing the machine to a crawl. Once this Virtual RAM was sized to the ISE minimum of 4GB (leaving 2GB dedicated to the host OS), the machine worked correctly. Yes, the ISE VM will happily use ALL the RAM allocated to it.
This is also the reason that Virtual Box and other "Desktop" class virtualization environments cannot be supported across the board. Nearly every machine hosting VMWare Workstation, Virtual Box, etc... has a different chipset, video card, HD controller, and on, and on...
The best thing to do for your situation is to try to install it. If it works, document your EXACT system configuration and the EXACT virtual configuration so that you may look back to it for future installs. You can also use this information to "tweak" the virtual settings until you get a combination that works for you. This will help to document the configurations that do not work on YOUR desktop environment.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

[SOLVED] VMware Workstation 7.1.4 fails to start/build on kernel 3.0

Since new kernel 3.0 update I cannot rebuild vmware modules
~ >>> sudo vmware-modconfig --console --install-all
Unable to initialize kernel module configuration
or start the Workstation
~ >>> vmware
Logging to /tmp/vmware-igor/setup-7740.log
Unable to initialize module building library
Does anybody know what's wrong?
Last edited by karabaja4 (2011-08-12 17:55:38)

Hi, I've been reading these forums since switched from slackware and gentoo to arch about 4 years ago. This is the first time I've been unable to fix a problem from searching here or the wiki
I'm having trouble installing vmware workstation.
So I recompiled the kernel and nvidia linking it to the .0-ARCH.
└⇥ uname -a
Linux myhost 3.0.0-ARCH #1 SMP PREEMPT Wed Aug 10 07:29:07 UTC 2011 x86_64 AMD Turion(tm) 64 X2 Mobile Technology TL-56 AuthenticAMD GNU/Linux
For the rest I followed the wiki to install vmware. Everything goes swimmingly until
└⇥ sudo vmware-modconfig --console --install-all
Password:
Stopping VMware services:
VMware USB Arbitrator done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmmon-only'
make -C /lib/modules/3.0.0-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-3.0.0-ARCH'
CC [M] /tmp/vmware-root/modules/vmmon-only/linux/driver.o
/tmp/vmware-root/modules/vmmon-only/linux/driver.c:40:28: fatal error: linux/smp_lock.h: No such file or directory
compilation terminated.
make[2]: *** [/tmp/vmware-root/modules/vmmon-only/linux/driver.o] Error 1
make[1]: *** [_module_/tmp/vmware-root/modules/vmmon-only] Error 2
make[1]: Leaving directory `/usr/src/linux-3.0.0-ARCH'
make: *** [vmmon.ko] Error 2
make: Leaving directory `/tmp/vmware-root/modules/vmmon-only'
Unable to install vmmon
Does anyone have a suggestion of where to poke around?

Oracle rac installation in vmware workstation?

iam very eager to learn the oracle rac, for that in my pc i created the 2 virtual machines in vmware workstation and installed redhat linux AS3.0 o.s.
i need a steps to install the oracle 9i rac in these vmware enviornment....

See my articles at http://www.dbasupport.com

Issues with Arch 2009.02 in VMware Workstation [SOLVED]

I installed Arch Linux 2009.02 i686 as a guest in VMware Workstation 6.5.1, my host is Vista x64. The installation of Arch itself and Xorg wasn't a problem although from this point I've had several issues.
I was unable to 'startx' or 'xinit' without getting crashes, however adding hal to the daemons fixed that problem - some wiki entries state to add dbus, but dbus is already started. A lot of content on the wiki is outdated, telling users to use hwd; I did install hwd separately (from sourceforge) although it gave me hundreds? of errors related to PCI and eventually failure to parse some x configuration binary in /usr/bin.
Multimedia Issues
I then installed xfce4 and gstreamer-plugins. All video and audio play back too quickly, i.e. it seems to play the streams as fast as they can decode. This also happens with flash content such as youtube after I'd installed the appropriate programs. Thinking this may be a timing issue, I editted the vmware config file on my Windows host although it did not help; the timing in the VM seemed to be correct anyway.
Display Issues
When I run 'startxfce4' from a terminal, Xfce will start as 800x600 - if I go to change this resolution all options show 0Hz as the refresh rate and many options my monitor cannot display are shown even though I have VMware set to allow a maximum size of 1680x1050. I was unable to generate a 'good' xorg.conf file using 'X -configure' and as mentioned earlier, hwd would not work for me. I installed xf86-video-vmware and xf86-video-vesa as well as both open-vm-tools and normal vmware-tools (not at the same time or together) but can't seem to sort this issue. vmware-tools was able to generate a valid xorg.conf file but it only included a handful of 4:3 resolutions and some of these still showed 0hz. For some strange reason 'startx' and 'xinit' now do not work having failed to find /dev/fb0.
VMware Tools
When I did try to install vmware-tools, it had many difficulties trying to build the modules - mostly regarding to not recognising __FREEBSD__, I cannot remember the complete error. I also tried to build open-vm-tools but that gave an error about not being able to find libproc even though I had procps installed. Stopping open-vm-tools on shutdown also always fails and occurs twice.
I'm going to try reinstalling now that I know a little more about what I did to get things working but if anyone could give me a hand it'd be much appreciated.
Last edited by andyxl987 (2009-08-04 00:17:29)

After a lot of experimentation I've got a satisfactory installation although a few minor problems remain:
Adjustments required to correctly run Alsa+Xorg in Arch Linux 2009.02 using VMware Workstation
The current kernel does not play nicely with alsa, downgrade to kernel26-2.6.29.4-1:
wget http://www.schlunix.org/archlinux/core/ … pkg.tar.gz
pacman -U kernel26-2.6.29.4-1-i686.pkg.tar.gz
Install/Upgrade dbus:
pacman -Sy dbus
Add hal (if it's not installed then make sure to do so) to your daemons located in /etc/rc.conf, e.g.
DAEMONS=(syslog-ng network netfs crond hal)
The current open-vm-tools-modules is not compatible with the older kernel, instead use open-vm-tools-modules-2009.04.23-1:
wget http://www.schlunix.org/archlinux/commu … pkg.tar.gz
pacman -U open-vm-tools-modules-2009.04.23-1
The installation will prompt you with an error that /etc/modprobe.conf could not be found (as does the current version), add the following to /etc/modprobe.d/modprobe.conf:
install pcnet32 /sbin/modprobe -q --ignore-install vmxnet; /sbin/modprobe -q --ignore-install pcnet 32 ; /bin/true;
You can now install open-vm-tools:
pacman -S open-vm-tools
To autoload open-vm-tools on start up you need to add it to your daemons located in /etc/rc.conf, e.g.
DAEMONS=(syslog-ng network netfs crond hal open-vm-tools)
Add vmware-user to your /etc/X11/xinit/xinitrc file if you desire (for seamless mouse and display switching), e.g. my xinitrc with xfce4 ends with:
vmware-user &
exec startxfce4
Install the following components: xf86-video-vmware xf86-video-vesa xf86-input-vmmouse xf86-input-mouse:
(You will not be able to start x if you have installed xf86-video-fbdev and do not have a valid xorg.conf file, this is addressed later)
pacman -S xf86-video-vmware xf86-video-vesa xf86-input-vmmouse xf86-input-mouse
Lastly we need to edit/create the /etc/X11/xorg.conf file to use our vmware drivers, this will enable automatic resolution switching and seamless mouse functionality:
(All of the following is necessary otherwise X will ignore our vmware drivers)
Section "ServerFlags"
Option "AllowEmptyInput" "false"
EndSection
Section "InputDevice"
Identifier "VMware Mouse"
Driver "vmmouse"
Option "Protocol" "ps/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "Device"
Identifier "VMware SVGA"
Driver "vmware"
EndSection
Section "ServerLayout"
Identifier "VMware Config"
InputDevice "VMware Mouse" "CorePointer"
EndSection
Issues
* open-vm-tools fails to stop during a shutdown or /etc/rc.d/open-vm-tools stop/restart
* most screen resolutions show 0Hz (although everything works correctly) and adding VertRefresh to xorg.conf produces a major error
* playback of flash video produces a sound artefact when starting - although I think this may be to do with the decoder rather than system
I've marked this as solved although I welcome any suggestions regarding these minor issues. The open-vm-tools one I can probably sort out but it's too late now to look into tonight
Last edited by andyxl987 (2009-08-04 00:21:03)

Vmware workstations 10

Every time that I launch VMware workstations 10 i get the error : Unable to stop services.
2014-01-01T17:07:20.299Z| vthread-3| I120: Log for VMware Workstation pid=2285 version=10.0.1 build=build-1379776 option=Release
2014-01-01T17:07:20.299Z| vthread-3| I120: The process is 64-bit.
2014-01-01T17:07:20.299Z| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8
2014-01-01T17:07:20.299Z| vthread-3| I120: Host is unknown
2014-01-01T17:07:20.296Z| vthread-3| I120: Msg_Reset:
2014-01-01T17:07:20.296Z| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": No such file or directory.
2014-01-01T17:07:20.296Z| vthread-3| I120: ----------------------------------------
2014-01-01T17:07:20.296Z| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2014-01-01T17:07:20.296Z| vthread-3| I120: Msg_Reset:
2014-01-01T17:07:20.296Z| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/home/ismail/.vmware/config": No such file or directory.
2014-01-01T17:07:20.296Z| vthread-3| I120: ----------------------------------------
2014-01-01T17:07:20.296Z| vthread-3| I120: PREF Optional preferences file not found at /home/ismail/.vmware/config. Using default values.
2014-01-01T17:07:20.296Z| vthread-3| I120: PREF Unable to check permissions for preferences file.
2014-01-01T17:07:20.296Z| vthread-3| I120: Msg_Reset:
2014-01-01T17:07:20.296Z| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/home/ismail/.vmware/preferences": No such file or directory.
2014-01-01T17:07:20.296Z| vthread-3| I120: ----------------------------------------
2014-01-01T17:07:20.296Z| vthread-3| I120: PREF Failed to load user preferences.
2014-01-01T17:07:20.299Z| vthread-3| W110: HostinfoReadDistroFile: Cannot work with empty file.
2014-01-01T17:07:20.299Z| vthread-3| W110: HostinfoOSData: Error: no distro file found
2014-01-01T17:07:20.300Z| vthread-3| W110: Logging to /tmp/vmware-root/vmware-modconfig-2285.log
2014-01-01T17:07:20.309Z| vthread-3| I120: Obtaining info using the running kernel.
2014-01-01T17:07:20.309Z| vthread-3| I120: Created new pathsHash.
2014-01-01T17:07:20.309Z| vthread-3| I120: Setting header path for 3.12.6-1-ARCH to "/lib/modules/3.12.6-1-ARCH/build/include".
2014-01-01T17:07:20.309Z| vthread-3| I120: Validating path "/lib/modules/3.12.6-1-ARCH/build/include" for kernel release "3.12.6-1-ARCH".
2014-01-01T17:07:20.309Z| vthread-3| I120: Failed to find /lib/modules/3.12.6-1-ARCH/build/include/linux/version.h
2014-01-01T17:07:20.309Z| vthread-3| I120: /lib/modules/3.12.6-1-ARCH/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2014-01-01T17:07:20.310Z| vthread-3| I120: using /sbin/gcc for preprocess check
2014-01-01T17:07:20.321Z| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.12.6-1-ARCH".
2014-01-01T17:07:20.321Z| vthread-3| I120: The header path "/lib/modules/3.12.6-1-ARCH/build/include" for the kernel "3.12.6-1-ARCH" is valid. Whoohoo!
2014-01-01T17:07:20.380Z| vthread-3| I120: Reading in info for the vmmon module.
2014-01-01T17:07:20.380Z| vthread-3| I120: Reading in info for the vmnet module.
2014-01-01T17:07:20.380Z| vthread-3| I120: Reading in info for the vmblock module.
2014-01-01T17:07:20.380Z| vthread-3| I120: Reading in info for the vmci module.
2014-01-01T17:07:20.380Z| vthread-3| I120: Reading in info for the vsock module.
2014-01-01T17:07:20.380Z| vthread-3| I120: Setting vsock to depend on vmci.
2014-01-01T17:07:20.380Z| vthread-3| I120: Invoking modinfo on "vmmon".
2014-01-01T17:07:20.383Z| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2014-01-01T17:07:20.383Z| vthread-3| I120: Invoking modinfo on "vmnet".
2014-01-01T17:07:20.386Z| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2014-01-01T17:07:20.386Z| vthread-3| I120: Invoking modinfo on "vmblock".
2014-01-01T17:07:20.389Z| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2014-01-01T17:07:20.389Z| vthread-3| I120: Invoking modinfo on "vmci".
2014-01-01T17:07:20.392Z| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2014-01-01T17:07:20.392Z| vthread-3| I120: Invoking modinfo on "vsock".
2014-01-01T17:07:20.397Z| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2014-01-01T17:07:20.416Z| vthread-3| I120: to be installed: vmmon status: 0
2014-01-01T17:07:20.417Z| vthread-3| I120: to be installed: vmnet status: 0
2014-01-01T17:07:20.417Z| vthread-3| I120: to be installed: vmci status: 0
2014-01-01T17:07:20.427Z| vthread-3| I120: Obtaining info using the running kernel.
2014-01-01T17:07:20.428Z| vthread-3| I120: Setting header path for 3.12.6-1-ARCH to "/lib/modules/3.12.6-1-ARCH/build/include".
2014-01-01T17:07:20.428Z| vthread-3| I120: Validating path "/lib/modules/3.12.6-1-ARCH/build/include" for kernel release "3.12.6-1-ARCH".
2014-01-01T17:07:20.428Z| vthread-3| I120: Failed to find /lib/modules/3.12.6-1-ARCH/build/include/linux/version.h
2014-01-01T17:07:20.428Z| vthread-3| I120: /lib/modules/3.12.6-1-ARCH/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2014-01-01T17:07:20.428Z| vthread-3| I120: using /sbin/gcc for preprocess check
2014-01-01T17:07:20.440Z| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.12.6-1-ARCH".
2014-01-01T17:07:20.440Z| vthread-3| I120: The header path "/lib/modules/3.12.6-1-ARCH/build/include" for the kernel "3.12.6-1-ARCH" is valid. Whoohoo!
2014-01-01T17:07:20.499Z| vthread-3| I120: Kernel header path retrieved from FileEntry: /lib/modules/3.12.6-1-ARCH/build/include
2014-01-01T17:07:20.499Z| vthread-3| I120: Update kernel header path to /lib/modules/3.12.6-1-ARCH/build/include
2014-01-01T17:07:20.499Z| vthread-3| I120: Validating path "/lib/modules/3.12.6-1-ARCH/build/include" for kernel release "3.12.6-1-ARCH".
2014-01-01T17:07:20.499Z| vthread-3| I120: Failed to find /lib/modules/3.12.6-1-ARCH/build/include/linux/version.h
2014-01-01T17:07:20.499Z| vthread-3| I120: /lib/modules/3.12.6-1-ARCH/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2014-01-01T17:07:20.499Z| vthread-3| I120: using /sbin/gcc for preprocess check
2014-01-01T17:07:20.510Z| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.12.6-1-ARCH".
2014-01-01T17:07:20.511Z| vthread-3| I120: The header path "/lib/modules/3.12.6-1-ARCH/build/include" for the kernel "3.12.6-1-ARCH" is valid. Whoohoo!
2014-01-01T17:07:20.512Z| vthread-3| I120: Found compiler at "/sbin/gcc"
2014-01-01T17:07:20.517Z| vthread-3| I120: Got gcc version "4.8.2".
2014-01-01T17:07:20.517Z| vthread-3| I120: The GCC version matches the kernel GCC minor version like a glove.
2014-01-01T17:07:20.518Z| vthread-3| I120: Using user supplied compiler "/sbin/gcc".
2014-01-01T17:07:20.523Z| vthread-3| I120: Got gcc version "4.8.2".
2014-01-01T17:07:20.523Z| vthread-3| I120: The GCC version matches the kernel GCC minor version like a glove.
2014-01-01T17:07:20.530Z| vthread-3| I120: Trying to find a suitable PBM set for kernel "3.12.6-1-ARCH".
2014-01-01T17:07:20.530Z| vthread-3| I120: No matching PBM set was found for kernel "3.12.6-1-ARCH".
2014-01-01T17:07:20.531Z| vthread-3| I120: The GCC version matches the kernel GCC minor version like a glove.
2014-01-01T17:07:20.531Z| vthread-3| I120: Validating path "/lib/modules/3.12.6-1-ARCH/build/include" for kernel release "3.12.6-1-ARCH".
2014-01-01T17:07:20.531Z| vthread-3| I120: Failed to find /lib/modules/3.12.6-1-ARCH/build/include/linux/version.h
2014-01-01T17:07:20.531Z| vthread-3| I120: /lib/modules/3.12.6-1-ARCH/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2014-01-01T17:07:20.531Z| vthread-3| I120: using /sbin/gcc for preprocess check
2014-01-01T17:07:20.541Z| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.12.6-1-ARCH".
2014-01-01T17:07:20.541Z| vthread-3| I120: The header path "/lib/modules/3.12.6-1-ARCH/build/include" for the kernel "3.12.6-1-ARCH" is valid. Whoohoo!
2014-01-01T17:07:20.543Z| vthread-3| I120: The GCC version matches the kernel GCC minor version like a glove.
2014-01-01T17:07:20.543Z| vthread-3| I120: Validating path "/lib/modules/3.12.6-1-ARCH/build/include" for kernel release "3.12.6-1-ARCH".
2014-01-01T17:07:20.544Z| vthread-3| I120: Failed to find /lib/modules/3.12.6-1-ARCH/build/include/linux/version.h
2014-01-01T17:07:20.544Z| vthread-3| I120: /lib/modules/3.12.6-1-ARCH/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2014-01-01T17:07:20.544Z| vthread-3| I120: using /sbin/gcc for preprocess check
2014-01-01T17:07:20.557Z| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.12.6-1-ARCH".
2014-01-01T17:07:20.557Z| vthread-3| I120: The header path "/lib/modules/3.12.6-1-ARCH/build/include" for the kernel "3.12.6-1-ARCH" is valid. Whoohoo!
2014-01-01T17:07:20.557Z| vthread-3| I120: Using temp dir "/tmp".
2014-01-01T17:07:20.559Z| vthread-3| I120: Obtaining info using the running kernel.
2014-01-01T17:07:20.560Z| vthread-3| I120: Setting header path for 3.12.6-1-ARCH to "/lib/modules/3.12.6-1-ARCH/build/include".
2014-01-01T17:07:20.560Z| vthread-3| I120: Validating path "/lib/modules/3.12.6-1-ARCH/build/include" for kernel release "3.12.6-1-ARCH".
2014-01-01T17:07:20.560Z| vthread-3| I120: Failed to find /lib/modules/3.12.6-1-ARCH/build/include/linux/version.h
2014-01-01T17:07:20.560Z| vthread-3| I120: /lib/modules/3.12.6-1-ARCH/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2014-01-01T17:07:20.560Z| vthread-3| I120: using /sbin/gcc for preprocess check
2014-01-01T17:07:20.571Z| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.12.6-1-ARCH".
2014-01-01T17:07:20.571Z| vthread-3| I120: The header path "/lib/modules/3.12.6-1-ARCH/build/include" for the kernel "3.12.6-1-ARCH" is valid. Whoohoo!
2014-01-01T17:07:20.629Z| vthread-3| I120: Invoking modinfo on "vmmon".
2014-01-01T17:07:20.633Z| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2014-01-01T17:07:20.633Z| vthread-3| I120: Invoking modinfo on "vmnet".
2014-01-01T17:07:20.636Z| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2014-01-01T17:07:20.636Z| vthread-3| I120: Invoking modinfo on "vmci".
2014-01-01T17:07:20.638Z| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2014-01-01T17:07:20.658Z| vthread-3| I120: Unable to execute stop. Error:
2014-01-01T17:07:20.658Z| vthread-3| I120+ Failed to execute child process "/opt/Vmware/vmware" (No such file or directory)
thank you for your help

Then try re-installing the package. (of course as root)
Seems like a broken / incomplete installation.
I guess you've got a .bundle file for installing.
When you want to install, first change in to the directory where the package is located. then write
chmod +x name-of-file.bundle
. If that fails, try as sudo.
Then you type in
sudo ./name-of-file.bundle
Replace 'name-of-file' with the true name of your installer file
/AndyRoid
EDIT: just figured out that there is a vmware-workstation package in the AUR. Tried it out and works fine.
Last edited by AndyRoid (2014-01-02 14:18:50)

[SOLVED]VMware-Workstation install error

Anyone else getting this error while trying to install VMware-Workstation-Full-10.0.3-1895310.x86_64.bundle? Just started happening after latest kernel update, installed just fine before.
Extracting VMware Installer...done.
Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory
Attempt to unlock mutex that was not locked
/tmp/vmis.SbhNmP/install/vmware-installer/vmware-installer: line 56: 1594 Aborted (core dumped) VMWARE_INSTALLER="$VMWARE_INSTALLER" VMISPYVERSION="$VMISPYVERSION" "$VMWARE_INSTALLER"/vmis-launcher "$VMWARE_INSTALLER"/vmware-installer.py "$@"
Last edited by Pednick (2014-10-24 00:55:00)

Trilby wrote:
Please post the output of the following:
pacman -Qs libcanberra
pacman -Qi linux
uname -a
if the version numbers from the second and third command don't match, reboot.
Thanks for the info, I already had libcanberra installed. I manually do that after a fresh install so I don't know why the errors show. Anyway I found out I can do this:
./VMware-Workstation-Full-10.0.3-1895310.x86_64.bundle --console --eulas-agreed
pacman -S linux-headers then reboot
uname -r
find / -name headers
Worked after that.

Windows 7 64bits Installing Internet Explorer 11 ERROR Neutral package installation failed

Hi,
The laptop is running Windows 7 64bits with Internet Explorer 10 and the Windows automatic updates is turned on. The problem happens when the Windows keeps installing the Internet Explorer 11 every time between shutdown process. So I decided to download
IE11 offline installation and try to install from it but the problem doesn't solve, the installation still does not complete. I have tried to delete all files in the Windows temp folder and IE temp folder already but the problem still exist.
Below is the details from IE11_main.log file
00:00.000:
====================================================================
00:00.000: Started: 2014/05/26 (Y/M/D) 11:00:44.473 (local)
00:00.000: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.016: Command line: "C:\Users\TBG\Desktop\IE11-Windows6.1-x64-en-us.exe"
00:00.016: INFO:    Setup installer for Internet Explorer: 11.0.9600.16428
00:00.016: INFO:    Previous version of Internet Explorer: 10.0.9200.16866
00:00.016: INFO:    Checking if iexplore.exe's current version is between 11.0.9600.0...
00:00.016: INFO:    ...and 11.1.0.0...
00:00.016: INFO:    Maximum version on which to run IEAK branding is: 11.1.0.0...
00:00.016: INFO:    iexplore.exe version check success. Install can proceed.
00:00.016: INFO:    Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
00:00.016: INFO:    Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:00.016: INFO:    Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:00.016: INFO:    Trying to extract ID: 7006 (0) as "IE11-neutral.Extracted.cab"
00:00.702: INFO:    Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:00.702: INFO:    Extracted Spelling dictionary for en to C:\Windows\TEMP\IE18CE4.tmp\Spelling_en.msu.
00:00.702: INFO:    Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:00.702: INFO:    Extracted Hyphenation dictionary for en to
C:\Windows\TEMP\IE18CE4.tmp\Hyphenation_en.msu.
00:00.718: INFO:    Trying to extract ID: 7128 (1033) as "IE11-support.cab"
00:01.607: INFO:    PauseOrResumeAUThread: Successfully paused Automatic Updates.
00:02.714: INFO:    Updated Download list, Hardware Blocking list, and no reboot policy files successfully downloaded
and extracted for use.
00:02.730: INFO:    Launched program to check hardware: "C:\Windows\TEMP\IE18CE4.tmp\IE11-
SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE18CE4.tmp\IE11-support\HardwareBlockingList.xml"
00:02.870: INFO:    Graphics Device Information: Intel(R) HD Graphics Family
00:02.870: INFO:    Hardware support check succeeded. Installation will continue.
00:02.870: INFO:    Windows 7 operating system detected.
00:02.886: INFO:    Service pack major: 1
00:02.886: INFO:    Service pack minor: 0
00:02.886: INFO:    Service pack name: Service Pack 1
00:02.886: INFO:    Version Check for (KB2834140) of C:\Windows\System32\d3d11.dll: 6.2.9200.16570 >=
6.2.9200.16570 (True)
00:02.886: INFO:    Version Check for (KB2670838) of C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll:
6.2.9200.16492 >= 6.2.9200.16426 (True)
00:02.886: INFO:    Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18409 >=
6.1.7601.17727 (True)
00:02.902: INFO:    Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll:
6.1.7601.18229 >= 6.1.7601.17617 (True)
00:02.902: INFO:    Version Check for (KB2731771) of C:\Windows\System32\conhost.exe: 6.1.7601.18229 >=
6.1.7601.17888 (True)
00:02.902: INFO:    Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
00:02.902: INFO:    Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >=
6.1.7601.18010 (True)
00:02.902: INFO:    Version Check for (KB2888049) of C:\Windows\System32\drivers\tcpip.sys: 6.1.7601.18254 >=
6.1.7601.18254 (True)
00:02.917: INFO:    Version Check for (KB2882822) of C:\Windows\System32\tdh.dll: 6.1.7601.18247 >=
6.1.7601.18247 (True)
00:07.597: INFO:    Waiting for 0 prerequisite downloads.
01:37.423: INFO:    The neutral pack was successfully downloaded from the internet. Installation will continue using
the downloaded package.
01:37.423: INFO:    Waiting for 0 language pack downloads.
01:37.423: INFO:    Language pack downloads completed. (exit code = 0xffffffff (4294967295)).
01:37.438: INFO:    No reboot logic message NrApiStart(0), lParam=0x03771068 returned 0x00000000.
01:38.000: INFO:    No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
01:38.000: INFO:    No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
01:38.000: INFO:    Installing with the downloaded package. C:\Windows\TEMP\IE18CE4.tmp\IE11-
neutral.Downloaded.cab
01:38.000: INFO:    Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package
/packagepath:C:\Windows\TEMP\IE18CE4.tmp\IE11-neutral.Downloaded.cab /quiet /norestart
02:20.619: INFO:    Process exit code 0x80004005 (-2147467259) [Unspecified error ]
02:20.713: ERROR:   Neutral package installation failed (exit code = 0x80004005 (2147500037)).
02:20.729: INFO:    No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.
02:20.744: INFO:    No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
02:20.775: INFO:    No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
02:20.869: INFO:    Waiting for Active Setup to complete.
02:20.963: INFO:    PauseOrResumeAUThread: Successfully resumed Automatic Updates.
02:32.694: INFO:    Setup exit code: 0x00009C59 (40025) - The neutral cab failed to install.
02:32.741: INFO:    Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll
02:32.756: INFO:    SQM Upload returned 403
02:36.453: INFO:    Cleaning up temporary files in: C:\Windows\TEMP\IE18CE4.tmp
02:36.531: INFO:    Unable to remove directory C:\Windows\TEMP\IE18CE4.tmp, marking for deletion on reboot.
02:36.531: INFO:    Released Internet Explorer Installer Mutex
Taweesak Archawamaitreekool

DISM.log would make this clearer. And using ProcMon I suspect would really make it snap out at you.   <eg>
C.f. (credit for a recent discovery)
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/i-get-error-9c59-when-updating-internet-explorer/03d4473a-867b-44a5-9a37-913e9a5879cf?page=8&msgId=afe85da0-36e0-4160-860b-d2973e78c8b9
Unfortunately, since then others have quickly stuck a pin in this balloon, finding that it is just one more bump in the road, but at least working around this coding error should change your symptom.
Good luck
Robert Aldwinckle
Thank you very much.
I have tried to create a symbolic link as suggested on a forum but the problem still cannot be solved. The error message from IE11_main.log file is exactly the same as before.
For DISM.Log, here are the details from the started time of the installtion process
2014-05-29 16:53:55, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
2014-05-29 16:53:55, Info                  DISM   DISM.EXE:
2014-05-29 16:53:55, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
2014-05-29 16:53:55, Info                  DISM   DISM.EXE: Executing command line: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab
/quiet /norestart
2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Manager: PID=9144 Successfully loaded the ImageSession at "C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583"
- CDISMManager::LoadImageSession
2014-05-29 16:53:58, Info                  DISM   DISM Image Session: PID=8324 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info                  DISM   DISM OS Provider: PID=8324 Defaulting SystemPath to C:\ - CDISMOSServiceManager::Final_OnConnect
2014-05-29 16:53:58, Info                  DISM   DISM OS Provider: PID=8324 Defaulting Windows folder to C:\Windows - CDISMOSServiceManager::Final_OnConnect
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Warning               DISM   DISM Provider Store: PID=8324 Failed to Load the provider: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll.
- CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Failed to get and initialize the PE Provider. Continuing by assuming that it
is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Manager: PID=9144 Image session successfully loaded from the temporary location: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583
- CDISMManager::CreateImageSession
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:58, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:58, Info                  DISM   DISM.EXE: Target image information: OS Version=6.1.7601.17592, Image architecture=amd64
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting the collection of providers from an image provider store type. - CDISMProviderStore::GetProviderCollection
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:58, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
2014-05-29 16:53:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 CBS is being initialized for online use. More information about CBS actions can be
located at: %windir%\logs\cbs\cbs.log - CDISMPackageManager::Initialize
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info                  DISM   DISM OS Provider: PID=8324 Successfully loaded the hive. - CDISMOSServiceManager::DetermineBootDrive
2014-05-29 16:53:59, Info                  DISM   DISM Driver Manager: PID=8324 Further logs for driver related operations can be found in the target operating system
at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISM Unattend Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: OSServices
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: MsiManager
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: MsiManager.
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: IntlManager
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: IntlManager.
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DriverManager
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DriverManager.
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: SmiManager
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Edition Manager
2014-05-29 16:53:59, Info                  DISM   DISM Transmog Provider: PID=8324 Current image session is [ONLINE] - CTransmogManager::GetMode
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Processing the top level command token(add-package). - CPackageManagerCLIHandler::Private_ValidateCmdLine
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Encountered the option "packagepath" with value "C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab"
- CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Package Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~11.2.9600.16428
with CBS state 4(CbsInstallStateStaged) being mapped to dism state 3(DISM_INSTALL_STATE_STAGED) - CDISMPackage::LogInstallStateMapping
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Initiating Changes on Package with values: 4, 7 - CDISMPackage::Internal_ChangePackageState
2014-05-29 16:54:00, Info                  DISM   PID=4640 Scratch directory set to 'C:\Users\TBG\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-05-29 16:54:00, Info                  DISM   PID=4640 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadImageSession
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Failed to get and initialize the PE Provider. Continuing by assuming that it
is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Manager: PID=4640 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM.EXE:
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
2014-05-29 16:54:00, Info                  DISM   DISM.EXE:
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Executing command line: c:\windows\sysnative\dism.exe
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\WimProvider.dll. -
CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\CompatProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: WimManager
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Getting the help information collection for the provider: WimManager.
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Registering information from the help collection from provider: WimManager.
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(wimcommands) and category(localtoplevelhelp) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(cleanup-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(remount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(mount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(unmount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(commit-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(get-wiminfo) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(get-mountedwiminfo) and category(wimcommands) for the
provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: FolderManager
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Getting the help information collection for the provider: Compatibility Manager.
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
2014-05-29 16:54:00, Info                  DISM   DISM.EXE:
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
Taweesak Archawamaitreekool

Not able to install server 2012 R2 on a VMware Workstation 10 .

Dear Team,
Thanks in advance.
I am facing an issue when installing server 2012 R2 on a VMware Workstation 10 .
This is the error message i get ''windows cannot find the microsoft software license terms. make sure the installation sources are valid and restart the installation.''
i have tried changing the initial install option of OS to ''other''. But still its the same.
Finally i have installed it without adding the OS disk in the initial setup. But the problem here is that its asking me activation key.
if you have the activation key for 180 days please let me know.

I have the same problem here.
With VMWare Workstation 10, downloading and using the Windows 2012 R2 ISO evaluation to test.
Shortly after booting up with the ISO, it complains about this message: ''windows cannot find the microsoft software
license terms. make sure the installation sources are valid and restart the installation.''
BUT, if you uninstall VMWare Workstation 10 and install VMWare Workstation 9, no problem.
Something wrong with either VMWare Workstation 10 or Windows 2012 R2.

Bootable ISO not recognized by Hyper-V on Win 8.1 Enterprise 64-bit - VMware Workstation understands perfectly

I activated Hyper-V on my fully patched Windows 8.1 Enterprise 64-bit host PC and tried to create a Windows Server 2008 R2 virtual machine that should have installed from the bootable ISO (the one I downloaded from my MSDN subscription) for Windows Server
2008 R2, but when the VM starts, it goes through its boot device progression and fails to recognize the ISO as bootable. No amount of coaxing will convince Hyper-V to use the bootable ISO to install the operating system in the VM.
To see if there was an issue with the ISO, I removed Hyper-V from the host (because, as I discovered, VMware refuses to run when Hyper-V is present) and then fired up VMware Workstation 10, pointed it to the exact same ISO and it created the VM from that
ISO just fine. That proves there is nothing wrong with the ISO image.
I'm new to Hyper-V since I've been using VMware Workstation for quite some time and figured it was high time I began to make the switch to Hyper-V (since I'm paying for it anyway).
What setting(s) do I need to adjust to insure that Hyper-V sees the bootable ISO properly so it will install that OS in the virtual machine?
If you think development is tough now, think how hard it was using punched cards :-)

I followed the Hyper-V wizard instructions to the letter, including telling it the full path to where the ISO I wanted to use in creating my very first VM is located. I assume (perhaps incorrectly) that the Hyper-V wizard mounted that ISO on whatever
device it deemed appropriate, hopefully one that is in the boot device sequence. It all was very straight-forward and easy to understand; however, it doesn't work.
The corresponding wizard in VMware Workstation 10 fully understands the ISO and proceeds with its "Easy Install" process without anything else except the license key.
I didn't capture a video of the failed Hyper-V boot process, but to summarize, it went through its "progression" of devices and simply never found the ISO that I had previously designated.
Despite its seeming simplicity, the Hyper-V creation wizard doesn't perform what it is instructed to do while the equivalent VMware Workstation 10 wizard works flawlessly.
If you think development is tough now, think how hard it was using punched cards :-)

How to install oracle RAC 11g on oracle linux 5 using vmware workstation ?

Hello;
I need to Install Oracle RAC 11g R2 with database 11g ( 2 nodes ) but by using vmware workstation ( not server 2) on oracle linux 5-6 .
So any document can help me please ..
regards.

http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-ol5-using-vmware-server-2.php
http://appsdbaworkshop.blogspot.in/2011/10/11gr2-rac-on-linux-56-using-vmware.html
http://robertgfreeman.blogspot.in/2009/12/11gr2-rac-on-vmware-part-one.html

CUCM8.5 VMware Workstation Installation Failed - No Deployments Provided

Similar Messages

Maybe you are looking for