CUDA enabled driver for Nvidia NVS 140M

Hi,
I want to do some GPU coding on my T61 with Nvidia NVS 140M GPU using the "new" CUDA system. The NVS 140M supports CUDA but the current official driver from Levono (ForceWare 176.93) seems to be lacking CUDA support. When I download the recommended driver for the latest CUDA (2.1) from the Nvidia CUDA site (ForceWare 180.22) it's not installable unless I use the Nvidia Mobility Modder to force the driver to install. Then CUDA programs run fine but the system is kind of unstable. Resuming from stand by or hibernation works only sometimes, mostly screen starts flickering and then BIOS screen appears. So it's not really usable for a laptop computer. Further, ForceWare 176.93 should be able to support CUDA, since CUDA 1.1 is supported from 173.xx on, as this is the recommended driver provided for download.
Does anyone have an idea? It cannot be that I have suitable hardware but cannot use it properly due to some crappy driver policy.
This all relates to Vista x64, with linux there was until now no problem with the latest nvidia driver and resuming.
Cheers
Phil
Message Edited by phil12345678 on 03-12-2009 04:35 AM

Try the notebook driver for developer here. It worked for me.
http://developer.nvidia.com/object/cuda_3_0_downlo​ads.html

Similar Messages

  • Satellite A100-599 - Unable to install driver for nVidia GeForce Go 7600

    Greetings to all!
    Trying to install driver for Nvidia GeForce Go 7600 after complete system reinstall, but without any success. Only safe mode is available after this driver installation, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result all the time :(
    Would be glad to realize how to solve this... Thanks a lot.
    Satellite A100-599
    Current OS: Windpws Vista Home premium sp1.
    Message was edited by: Airtoground

    I do not want to install XP again, will try to fund a solution for Vista. Here is what I got from Installs list:
    Component List Satellite A100 PSAAR; Satellite Pro A100 PSAAs; Satego A100 PSAAW
    Contents and Installation order
    for Windows VISTA
    Windows Vista 32bit Home Premium - Windows Vista Home Premium&Basic(English) RTM
    - SLP Module OEMSLP2.0
    - Sun Java 2 Runtime Environment v1.6.0
    1 KB928190(For updated USBHub.sys) KB928190
    2 TOSHIBA Value Added Package Please use the attached ini file for ButtonSetting.ini and FeatureSelect.ini when the TVAP installation. v1.0.7
    3 Intel 945GM/940GML Display Driver v7.14.10.1114 (Package:V15.0.1.1114 PV)
    4 ATI ATI M52P/M54P/M56P Display Driver V8.31.100.3.2-061124a2-039454C
    *5 Nvidia G72M/G72MV/G73M Display Driver v97.46(TBD)*
    I found this driver but it says "no suitable driver found, installation wizard stops its work".
    Any ideas what could it mean?
    Thanks to all.

  • Nouveau driver (OSS 3D driver for Nvidia)

    I have tried to make packages for the nouveau driver with success, but would like feedback from other users before submitting them to AUR.
    To keep things clean and maintanable, i decided to create 3 packages :
    nouveau-git                     ---- the kernel modules
    libdrm-nouveau-git           ---- userspace part that replaces libdrm
    xf86-video-nouveau-git     ---- the driver itself (the easiest package)
    nouveau-git
    # Contributor : Lone_Wolf [email protected]
    pkgname=nouveau-git
    pkgver=20061126
    pkgrel=1
    pkgdesc="Kernel modules for nouveau driver"
    url="http://nouveau.freedesktop.org/wiki/"
    license=('GPL')
    depends=(glibc)
    sources=()
    md5sums=()
    options=('NOLIBTOOL')
    install=nouveau-git.install
    _kernver=2.6.18-ARCH
    # GIT variables
    _gitroot="git://anongit.freedesktop.org/git/mesa/drm/"
    _gitname="drm"
    build() {
    mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm
    cd $startdir/src
    msg "Connecting to git.freedesktop.org GIT server...."
    if [ -d $startdir/src/$_gitname ] ; then
    cd $_gitname && git-pull origin
    msg "The local files are updated."
    else
    git clone $_gitroot
    fi
    msg "GIT checkout done or server timeout"
    msg "Starting make..."
    cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
    cd ${_gitname}-build
    git checkout nouveau-1
    # ./autogen.sh
    # ./configure --prefix=/usr
    # make ||return 1
    # make DESTDIR=$startdir/pkg install
    cd linux-core
    make ||return 1
    # install drm.ko and nouveau.ko kernel modules
    # drm.ko is renamed to drm-nouveau.ko to avoid problems with the existing drm.ko module
    install -D -m644 drm.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm/drm-nouveau.ko
    install -D -m644 nouveau.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm/nouveau.ko
    nouveau-git.install
    # arg 1: the new package version
    post_install() {
    KERNEL_VERSION='2.6.18-ARCH'
    depmod -v $KERNEL_VERSION > /dev/null 2>&1
    echo ">>>"
    echo ">>> Make sure you have installed the xf86-video-nouveau-git package also"
    echo ">>> To make this work execute the following as root :"
    echo ">>> rmmod nvidia"
    echo ">>> modprobe drm
    echo ">>> modprobe -o --drm drm-nouveau"
    echo ">>> modprobe nouveau"
    echo ">>>"
    echo ">>> Now edit your /etc/X11/xorg.conf to use the nouveau driver:"
    echo ">>> Change in Section "Device" the Driver line to Driver "nouveau" "
    echo ">>>"
    echo ">>> Now start Xorg and run for cover !! "
    echo ">>>"
    /bin/true
    # arg 1: the new package version
    # arg 2: the old package version
    post_upgrade() {
    post_install $1
    rmmod drm-nouveau || echo 'In order to use the new nvidia module, exit Xserver and unload it manually.'
    # arg 1: the old package version
    post_remove() {
    KERNEL_VERSION='2.6.18-ARCH'
    depmod -v $KERNEL_VERSION > /dev/null 2>&1
    op=$1
    shift
    $op $*
    libdrm-nouveau-git
    # Contributor : Lone_Wolf [email protected]
    pkgname=libdrm-nouveau-git
    pkgver=20061126
    pkgrel=1
    pkgdesc="Userspace interface for nouveau driver"
    url="http://nouveau.freedesktop.org/wiki/"
    license=('GPL')
    depends=('glibc' 'nouveau-git')
    conflicts=('libdrm')
    provides=('libdrm')
    sources=()
    md5sums=()
    options=('NOLIBTOOL')
    # GIT variables
    _gitroot="git://anongit.freedesktop.org/git/mesa/drm/"
    _gitname="drm"
    build() {
    mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm
    cd $startdir/src
    msg "Connecting to git.freedesktop.org GIT server...."
    if [ -d $startdir/src/$_gitname ] ; then
    cd $_gitname && git-pull origin
    msg "The local files are updated."
    else
    git clone $_gitroot
    fi
    msg "GIT checkout done or server timeout"
    msg "Starting make..."
    cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
    cd ${_gitname}-build
    git checkout nouveau-1
    ./autogen.sh
    ./configure --prefix=/usr
    make ||return 1
    make DESTDIR=$startdir/pkg install
    xf86-video-nouveau-git
    # Contributor : Lone_Wolf [email protected]
    pkgname=xf86-video-nouveau-git
    pkgver=20061126
    pkgrel=1
    pkgdesc="OSS 3D driver for nvidia cards"
    url="http://nouveau.freedesktop.org/wiki/"
    license=('GPL')
    depends=('libdrm-nouveau-git' 'glibc')
    source=()
    md5sums=()
    options=('NOLIBTOOL')
    _gitroot="git://anongit.freedesktop.org/git/nouveau/xf86-video-nouveau/"
    _gitname="xf86-video-nouveau"
    build() {
    cd $startdir/src
    msg "Connecting to git.freedesktop.org GIT server...."
    if [ -d $startdir/src/$_gitname ] ; then
    cd $_gitname && git-pull origin
    msg "The local files are updated."
    else
    git clone $_gitroot
    fi
    msg "GIT checkout done or server timeout"
    msg "Starting make..."
    cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
    cd ${_gitname}-build
    ./autogen.sh
    ./configure --prefix=/usr
    make ||return 1
    make DESTDIR=$startdir/pkg install

    Hi
    I've just get the nouveau driver installed successfully. But i had to tweak some things in your PKGBUILDS.
    here you'll found the PKGBUILD i finally got.
    nouveau-git (i hadn't git installed before compiling)
    # Contributor : Lone_Wolf [email protected]
    pkgname=nouveau-git
    pkgver=20061126
    pkgrel=1
    pkgdesc="Kernel modules for nouveau driver"
    url="http://nouveau.freedesktop.org/wiki/"
    license=('GPL')
    depends=(glibc)
    makedepends=('git')
    sources=()
    md5sums=()
    options=('NOLIBTOOL')
    install=nouveau-git.install
    _kernver=2.6.18-ARCH
    # GIT variables
    _gitroot="git://anongit.freedesktop.org/git/mesa/drm/"
    _gitname="drm"
    build() {
    mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm
    cd $startdir/src
    msg "Connecting to git.freedesktop.org GIT server...."
    if [ -d $startdir/src/$_gitname ] ; then
    cd $_gitname && git-pull origin
    msg "The local files are updated."
    else
    git clone $_gitroot
    fi
    msg "GIT checkout done or server timeout"
    msg "Starting make..."
    cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
    cd ${_gitname}-build
    git checkout nouveau-1
    # ./autogen.sh
    # ./configure --prefix=/usr
    # make ||return 1
    # make DESTDIR=$startdir/pkg install
    cd linux-core
    make ||return 1
    # install drm.ko and nouveau.ko kernel modules
    # drm.ko is renamed to drm-nouveau.ko to avoid problems with the existing drm.ko module
    install -D -m644 drm.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm/drm-nouveau.ko
    install -D -m644 nouveau.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm/nouveau.ko
    libdrm-nouveau-git: nothing to change
    xf86-video-nouveau-git: faced 2 problems when trying to build this package: · Missing xf86driproto (so added to makedepends). · Compilation failure when trying to build the manpage. I edit the PKGBUILD with a dirty hack to avoid manpage compilation.
    # Contributor : Lone_Wolf [email protected]
    pkgname=xf86-video-nouveau-git
    pkgver=20061126
    pkgrel=1
    pkgdesc="OSS 3D driver for nvidia cards"
    url="http://nouveau.freedesktop.org/wiki/"
    license=('GPL')
    depends=('libdrm-nouveau-git' 'glibc')
    makedepends=('xf86driproto')
    source=()
    md5sums=()
    options=('NOLIBTOOL')
    _gitroot="git://anongit.freedesktop.org/git/nouveau/xf86-video-nouveau/"
    _gitname="xf86-video-nouveau"
    build() {
    cd $startdir/src
    msg "Connecting to git.freedesktop.org GIT server...."
    if [ -d $startdir/src/$_gitname ] ; then
    cd $_gitname && git-pull origin
    msg "The local files are updated."
    else
    git clone $_gitroot
    fi
    msg "GIT checkout done or server timeout"
    msg "Starting make..."
    cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
    cd $startdir/src/${_gitname}-build
    ##### Avoid manpage compilation #####
    mv Makefile.am Makefile.am.old
    cat Makefile.am.old | sed -e 's/SUBDIRS = src man/SUBDIRS = src/g' > Makefile.am
    mv configure.ac configure.ac.old
    cat configure.ac.old | sed -e 's/XORG_MANPAGE_SECTIONS/# XORG_MANPAGE_SECTIONS/g' | sed -e 's/man/Makefile//g' > configure.ac
    ##### End of hack #####
    ./autogen.sh
    ./configure --prefix=/usr
    make || return 1
    make DESTDIR=$startdir/pkg install
    here are my 2cents

  • Need driver for Nvidia Geforce Go 6150 for Windows 7

    Hi, can anyone please tell me where I can download the driver for Nvidia Geforce Go 6150 for Windows 7. I have tried the drivers for Windows Vista but it does not work. Thanks in advance.

    I followed this tutorial after installing Win7 on a friend's HP Pavilion tx1332LA (the tutorial is in Spanish):
    http://www.taringa.net/posts/ebooks-tutoriales/2570715/NVIDIA-nForce-Chipset-Driver-(windows-7-_-vista).html 
    And since the coprocessor was no longer listed as an unknown device (or something similar), I assumed everything worked correctly afterwards... is that alright or do I have to check in some other way? 
    Well, here is a part of what the tutorial says (what was enough for me):
    -Should work for 32-bits and 64-bits versions (I installed it on Windows 7 x64).
    -First of all, we see that in the Device Administrator, there is an unknown device, a coprocessor. That's because Windows 7 can't find its driver.
    -Download and install the following:
    NVIDIA nForce Chipset Driver
    ftp://ftp.hp.com/pub/softpaq/sp39501-40000/sp39535.exe
    and see if the coprocessor is recognized.
    -If not, go to the Device Administrator and find the unrecognized coprocessor.
    -Right-click on it and select Update driver...
    -Select browse my computer -> let me pick -> have disk (this is what the tutorial says, it wasn't exactly the same for me, but I eventually got to pick a folder on my hard drive)
    -Browse and select the following (assuming C represents the drive where everything from the file above got unpacked):
    C:\swsetup\SP39535\WinVista32\SMU\smuc.inf (for 32-bits version)
    C:\swsetup\SP39535\WinVista64\SMU\smuc64.inf (for 64-bits version)
    Note: That is what the tutorial says, but I could only select the SMU folder and not a specific file. After selecting the SMU folder, a driver was automatically listed, I selected it and it got installed.
    -Now, the coprocessor should be recognized (check the Device Manager).
    Hope it helps!
    Pixzeto
    (PD: HP, the graphical editor on this forum sucks on Opera 10.01)

  • Need new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

    Any one know where i can get the new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

    http://www.nvidia.com/object/7seriestechspecs.html
    Pls visit above nVIDIA web page.
    based on NVIDIA web pages, 7900GTX supports MAC OS X.
    but .....seems not so far.

  • Drivers for Nvidia NVS 3100M?

    Hello,
    which driver is recommended for NVS 3100 in T510? Latest driver from Nvidia site, or latest drivers from Lenovo?
    I think they are not same.
    Thank you

    I tried to install latest driver from nVidia website and there was no problem, so I think it has to be problem on Lenovos side.
    So, what can I do right now? Is there any chance that they will fix this?
    I dont want to use latest nVidia drivers because I got "driver stop responding" error yesterday. It had recovered, but there was some kind of grafic bug (i got lots of white pixels on screen) so I had to restart my computer..

  • Driver for NVidia GeForce 2 MX 200

    Hello!
    I have this problem for a while... I also know that there is a patch with drivers for Nvidia, but
    it does not include one for Geforce 2 MX 200 (only GeForce 2 Ulta....).
    Did anyone know if there is an answer for my problem?
    Thank You.

    Check this link:
    http://soldc.sun.com/developer/support/driver/tools/video/video-index.html

  • Compiled Driver for Nvidia Nforce

    Hello,
    Does anyone know where we can find a compiled Linux driver for the Nvidia
    Nforce ethernet controller. We are trying to image new computers. We
    have downloaded the drivers from the Nvidia website, but are unable to
    extract/install the files from the file. Is it possible to compile the
    driver/file from a computer running Windows?
    Any help would be appreciated
    Thanks
    Pat

    Pjsuko,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • [SOLVED] Driver for Nvidia Geforce 210

    Hi guys. I'm having some trouble searching the proper video driver for my system. I need the nvidia driver for my Geforce 210.
    The wiki says: "For GeForce 2/3/4 MX/Ti series cards [NV11 and NV17-NV28], install nvidia-96xx package, available in the AUR. " , but is there any way to avoid using AUR?
    I've tried downloading the propretary driver from Nvidia' site and couldn't install it. So i'm thinking about the open drivers: is Nouveau a good choice in your opinion?
    Thanks for reading!
    Last edited by Issam2204 (2013-05-11 13:11:45)

    Issam2204 wrote:I thought 2 meant 200. So what do you think i should install? Now i'm even more confused.
    run the following command & post the output here:
    lspci | grep VGA
    if you REALLY do mean Geforce 210 you should see something like this (as I have a Geforce 210)
    ┌─(t0m5k1@b0x)-(1131/pts/3)-(03:02pm:10/05/13)-
    └─>(%:~)
    └─>> lspci | grep VGA
    02:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)

  • T61 - New NVIDIA driver disabled OpenGL (NVS 140M)

    After recently updating my NVIDIA video driver using the ThinkPad update tool, my OpenGL drivers were disabled!  Everytime I try to run an OpenGL enabled application, I get the following error message: "nVidia OpenGL Driver: Driver components mis-match. Exit is the only option".  I tried reinstalling the drivers (version 7.15.11.7597), using the binary found on the Lenovo website, and rebooting, but it doesn't seem to help.  Does anyone have a suggestion on how to fix this issue?
    Thanks in advance.
    -Alex

    Welcome to the forum!
    Have you tried rolling the driver back, or un-installing it and then re-installing the previous one?
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Is CUDA enabled in my Nvidia card ?

    Hi
    I have a Lenovo Ideapad Y580 latop (i7-3610QM CPU) and an Nvidia GeForce GTX 660M (2GB RAM).  I'd like to know for Premiere Pro 6/CS6 whether CUDA is enabled (by default).
    Thanks.

    Before doing anything, review this: http://www.studio1productions.com/Articles/Nvidia.htm
    I just went through this with a brand new HP EliteBook. The installed graphics driver was over a year old and would not work with Premiere!! Follow the instructions to properly update display driver and use correct settings for display setup as described.
    Then you need to override the "list" of cards in Premiere so that yours can work. Go to Programs > Adobe > Premiere and find the "cuda_supported_cards.txt" file, and RENAME it. Put an "x" in front of the name or something. When Premiere can't find that file, it will simply use your card or not, based on whether it meets basic criteria, and does usually work. Then you will see "Mercury GPU" listed as show in Steven's screen grab.
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • How can I enable OpenGL for Nvidia 7600 GT (CS4)?

    Hello,
    today I installed Photoshop CS4 and can't enable OpenGL. So I updated my Nvidia 7600GT driver and the driver info says, that OpenGL 3.0 should work, but Photoshop dosn't allow me to enable it. What can I do?
    Regards,
    Micha
    http://www.nvidia.com/object/winxp64_185.85_whql.html

    Try reseting your perfs:
    Soon as you start photoshop hit Shift, Ctrl and Alt keys at the same time. Click yes on the window that pops up.
    There is another way to do the perf thing too. Read attached under troubleshooting
    http://kb2.adobe.com/cps/404/kb404898.html#supported

  • Driver for Nvidia Geforce needed

    Is it possible to get Solaris 7 working with a Nvidia Geforce 256 DDR chipset ? ( Creative Pro ) All I have at present is standard vga ! ! !
    I only need to it to work in "open Windows " mode
    Thanks

    I am also looking for GeForce support under Solaris 8. XI Graphics
    do not (yet) offer such a driver, and - judging from the discussions
    in various newsgroups - I am not the only one who cannot get XFree running.
    To get over the time until a working solution appears, a VESA driver
    would be a nice thing to have, like in BeOS - it does not recognise my card either, but allows me to use a (admittedly slow) high-res desktop
    with a decent color depth.
    Is something like that available? The 640x480 in grayscale, plus display problems in CDE, are barely usable IMHO.

  • [solved] Driver for Nvidia ION Card

    I have an Acer Aspire Revo which according to lspci has:
    03:00.0 VGA compatible controller: NVIDIA Corporation ION VGA (rev b1)
    Looking through the Wiki and the nVidia site, I am not sure which of the various drivers are for this card. The nVidia site takes me to a page "GEFORCE R320 GAME READY DRIVER". Has anyone got one of these and if so which driver are you using?
    Last edited by geekinthesticks (2013-08-13 07:44:43)

    You have two options to try: nvidia and nvidia-304xx.  Try the nvidia package first.  I'm pretty sure my ION2 atom board ran the nvidia package; I use that box as an NAS now and it doesn't have X installed so no need for a gfx driver now.
    Last edited by graysky (2013-08-12 20:19:16)

  • Driver for nvidia, ati and intel

    Hi,
    I have successfully installed archlinux on a usb drive.
    It works on every computer  with ati or intel graphics card but when I know want to install the nvidia driver it complains about a dependencie of the ati and intel one.
    So I have the choice between nvdia or intel and ati. Is there a way to make the usb stick work on ati, intel and nvidia?
    Regards

    archer42 wrote:How does as example ubuntu solve this issue?
    They don't. They use nouveau. You can tell the installer to install the nvidia driver from their "restricted" repository, but you do so at the expense of the intel and ati drivers, just like in Arch.
    There's one thing... if you don't care about 3d acceleration, you can simply force-uninstall libgl, intel-dri, ati-dri. Then you can have nvdia, intel and ati at the same time. But 3d accel will only work on nvidia, of course.
    Gentoo is (I think) the only one with a full solution - their eselect mechanism. Their mesa and nvidia-drivers ebuilds install GL libs in different places, so they don't conflict. Then eselect switches around some symlinks and plays with the LD_LIBRARY_PATH variable. You still have to manually use eselect ("eselect opengl set nvidia" or "eselect opengl set xorg-x11"), but at least you can have all packages installed at the same time.
    Last edited by Gusar (2012-01-18 15:55:50)

Maybe you are looking for

  • Passing "Value Objects" from one JSP to next  (2)

              Someone posted a response from BEA which has since disappeared, it was no different           from what I was doing and it I still can't get it to store the information in           the Value Object.           I get values (true/false) from

  • How do i change the master password on lion

    hi, i know the master password on my macbook pro but i would like to change it and since i upgraded to lion i cant a optionto change it any where. Macbook Pro osx 10.7 FileVault Is ON

  • ActionScript generation - Can it ignore ActionScript keywords in 4.0.1?

    When using Flash Builder eclipse plug-in Version 4.0 (build 272416), we are able to digest the Data/Services of a BlazeDS enabled server.  The ActionScript generator dynamically connects to the BlazeDS server, and then generates the necessary ActionS

  • Error messages after starting MI Client with xMAM 3.0

    Hi, below you'll find some errors which occur after starting the MI Client with xMAM 3.0. I'm using Java 1.4.2_13. Any idea why this happens? THX in advance! Florian MOBILE INFRASTRUCTURE 2.5 SUCCESSFULLY LAUNCHED **********    Client Installer Packa

  • Remote URLs for See Also Keyword Topics

    I am having difficulty entering a remote URL as a topic destination for a See Also Keyword. With the appropriate See Also Keyword selected, I click the New Keyword Topic icon. One of the available dropdown options for the Keyword Topic Destination is