CUDA error msg on startup after updating?

I updated my CUDA Driver to 4.2.7 (Quadro 4000) and AE CS6 to 11.0.1 yesterday. Everything worked fine all day long.
However when I launch AE today, I'm getting this message. Any ideas why?

I am getting the exact same error message.
And when I check in the preferences I can't pick GPU. It worked fine with 11.0.0, but with 11.0.1 it does not work.
I even upgrade my CUDA past 4.2.7 to 4.2.10 which didn't show up in the control panel, but can be downloaded from NVIDIA's web site, but that didn't help.
And I have tried trashing both the Adobe After Effects 11.0 MC Prefs file and Adobe After Effects 11.0-x64 Prefs, and then tried the entire 11.0 folder in After Effects Preferences, but the problems continues to occur.

Similar Messages

  • I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer

    I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer.
    When I try to open Firefox, it opens. But there is the error message.
    What is this? How do I did rid of it?
    '''bold text'''

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    You can also check the connection settings in Tools > Options > Advanced : Network : Connection<br />
    If you do not need to use a proxy to connect to internet then select "No Proxy"
    See "Firefox connection settings":
    * [[Firefox cannot load websites but other programs can]]

  • Windows 7 Bootcamp is no longer available in startup after updating to Yosemite 10.10

    I updated my MacBook Pro (Retina, 15-inch, Late 2013) and then after updating I could no longer see my Windows 7 bootcamp when starting up.  I followed this tutorial to try to get it too work again without losing any information: Windows 7 Removed after update Yosemite.  I got to the part where we rebuild the MBR, but I got to part 8 and then it said that partition 4 is either too big or does not exist. 
    I do not know what to do from here and was wondering if I had done something wrong and/or what I can do to fix it?
    Thanks in advance

    You seem to have found the correct partition. The following table has your values. (ASC thinks I have invalid characters in my table, so this is a screen shot of the MS Excel spreadsheet).
    Leave your Testdisk display and start a new Terminal Window. You need to use the following steps. If you see any error messages during the following steps, please stop and post back here with the error message. The following steps have values from your Testdisk output (and you can verify) in Steps 7 and 8.
    Rebuild GPT4 using start/end offsets
    Sudo gdisk /dev/rdisk0
    P  (print the full list of parts)
    D  (delete)
    4  (part 4)
    N  (new part)
    4   (part 4)
    589682688 - Start offset in bytes  (start point for Bootcamp part)
    +387422201 -  (Size offset as opposed to End offset)
    0700     (Windows part type)
    P           (print list of all parts just to see what changes will be made)
    W         (Write the new GPT)
    Y           (Yes! really write the new GPT)
      This will delete and re-write the GPT partition info for /dev/disk0s4.
    Rebuild MBR to match the new GPT information thus resetting the Hybrid MBR. Use defaults for other questions (like partition codes). The only values that need modifications are the Boot flags and step 6. Accept all other defaults that Gdisk offers.
    Sudo gdisk /dev/disk0
    P  (Print list of parts)
    R   (Recover)
    H (chooses Hybrid)
    Partitions numbers to be hybridized: 2 3 4
    Y (Good for GRUB question)
    N (part 2 boot flag)
    N (part 3 boot flag)
    Y  (part 4 boot flag make NTFS bootable partition)
    W  (Write the new MBR)
    Y    (Yes! write the new MBR)
    Reboot
    Here is a sample Q and A for the second set of Gdisk steps.
    Place EFI GPT (0xEE) partition first in MBR (good for GRUB)? (Y/N): Y
    Creating entry for GPT partition #2 (MBR partition #2)
    Enter an MBR hex code (default AF): Press Enter/Return
    Set the bootable flag? (Y/N): N
    Creating entry for GPT partition #3 (MBR partition #3)
    Enter an MBR hex code (default AB): Press Enter/Return
    Set the bootable flag? (Y/N): N
    Creating entry for GPT partition #4 (MBR partition #4)
    Enter an MBR hex code (default 07): Press Enter/Return
    Set the bootable flag? (Y/N): Y
    Test 1 - Does Bootcamp Volume show up in Finder?
    Test 2 - Can you see files in Bootcamp Volume?
    Test 3 - Can you select Bootcamp in System Preferences -> Startup Disk?
    Test 4 - If Test 3 is successful, select Bootcamp and Click Restart.

  • No System Startup after Update 10.4.10 - Help?

    Hi,
    after updating to 10.4.10 Mac OS X was not completely startup. It was hanging at the end of the blue loading bar every time.
    I was running the Hardware Test on the OS X Installation DVD and the harddrive testprogramm. Everything was ok. I could start the system in the "Safe Mode". I read that a new system installation could fix startup problems. So I reinstalled OS X. Everything was running OK. Then I updated to 10.4.10 again and I have the same Problem again!
    I read about a quicktime component problem, so I reinstalled Quicktime in the "Safe Mode" like they were writing, but nothing helps.
    After the Update to 10.4.9 my system seemed to be slower, but now it does not even startup. It always hangs at the end of the blue loading bar.
    My System:
    MacMini - 1,83 GHz (Intel)
    1 GB-RAM
    SuperDrive
    AirPort
    80 GB Harddrive
    Any ideas??
    Thanks for help.
    Matthias
    MacMini, 1,83 GHz, 1GB Ram Mac OS X (10.4.10)
    Mac OS X (10.4.10)

    Matthias
    Welcome to Apple Discussions!!
    I could start the system in the "Safe Mode".
    Well try a normal startup, that fails, then start up in Safe Mode and immediately use the Console application (in /Applications/Utilities) to look at your system.log. Go back to where it says "reboot by <user>" and look at the lines immediately before that. Post some of them here.
    If it starts OK in safe mode, but not otherwise, then there may be a problem with one or more of the items listed in Mac OS X: What is Safe Boot, Safe Mode?.
    Since you don't get as far as being able to log in, it is unlikely that Login Items are a problem. Equally it is not likely to be the font caches mentioned since they are user specific. I would be inclined to start with the fonts in /Library/Fonts, and then work backwards in the list.
    See these User Tips for more about fonts:
    Font Management in OS X Panther (Kurt Lang)
    Fonts and Apple Type Services, part 1 (J.Otava)
    Fonts and Apple Type Services, part 2 (J.Otava)
    Fonts and Apple Type Services, part 3 (J.Otava)
    (sorry my links don't work any more, but you can search the User Tips forum for these)
    Let us know how you get on, and if you need more help!

  • Version 8 configure error when opening Itunes after updating to V8

    I have contacted iTunes several times with no answer to this problem.
    Everything was fine until I updated to Version 8, now every time I try and open iTunes it starts with a green bar stops about 3/4 along bar then says you need to restart to configure with Windows.
    I restart then it does the same as before yes, DEJA VU.
    This VERSION 8 is BUGGED I tell ya!
    Any solutions would be appreciated before I delete this software and use something else!
    Message was edited by: Version 8 bug
    Message was edited by: Version 8 bug

    I have a similar problem. After updating to version 8 (October 25, 2008) the itunes icon is plain and clicking it gives an error message (translated) like "This measure is only allowed for installed products".
    So I fetch the iTunes801setup.exe and try to install it again by clicking the "Repair" button. It appears to do its' thing and asks me to restart the machine. OK, but after that it's the same again: "This measure is only allowed for installed products".
    I don't want to lose all my music, can it be saved?
    I guess that I will lose it if I remove iTunes and start all over.

  • [Solved] 'New' error messages during init after updating initscripts

    After updating to the latest initscripts, I got some error messages during init that I hadn't seen before.  They occurred during one of the UDev steps, and were caused by an attempt to load an IDE module despite the controller being disabled.  The controller shows up in Windows devmgr too, so I guess it's a failing of the mobo or BIOS.
    In any case, I downgraded and found that the errors were nothing new.  I'm just curious if the appearance of the errors during init was by design or a happy accident.
    Last edited by alphaniner (2011-08-01 17:07:30)

    alphaniner wrote:
    karol wrote:If you have the new (i.e. current) initscripts, you should be fine:
    http://projects.archlinux.org/initscrip … 328fbaf2e7
    http://projects.archlinux.org/initscrip … 42dfeca8c2
    I had never noticed the file before yesterday, actually. And I'm up-to-date, yet it's still full of 'em.
    You need to reboot.
    After you do, run
    tail /var/log/boot
    Mine isn't perfect, but I've already sent an e-mail to the dev (it's a matter of just a sed oneliner)
    [karol@black ~]$ tail /var/log/boot
    Tue Aug 2 05:03:01 2011: :: Setting Hostname: black ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Setting Locale: pl_PL.UTF-8 ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Setting Consoles to UTF-8 mode ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Loading Keyboard Map: pl ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: :: Loading Console Font: Lat2-Terminus16 ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: :: Saving dmesg Log ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: INIT: Entering runlevel: 3
    Tue Aug 2 05:03:02 2011: :: Starting Syslog-NG ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:03 2011: :: Starting D-BUS system messagebus ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:04 2011: :: Starting acpid ^[[171G [BKGD] :: Starting gpm ^[[171G [BKGD^[[0;1

  • Intel RAID error in Device Manager after updating Intel Matrix Storage Console

    The latest in my catalogue of problems arose after updating Intel Matrix Storage Console (IMSC) ...
    Lost my RAID volume, but both drives were OK. However, IMSC seemed to be freezing, so I thought I'd install the latest version from Intel. Once installed, it gave me errors saying a plug in was not found, followed by messages saying that the SATA and RAID drivers were not installed. Device Manager thinks the drivers are OK, but the yellow triangle with the ! is shown against the Intel RAID driver. Tried un-installing and re-installing the controller, updating the drivers, different versions of IMSC and still get the yellow triangle with the !
    I have been having trouble with the RAID0 set up for weeks so wonder if it has finally died? I'm out of ideas. Can anyone help?
    This post gives more details of the history and PC configuration: https://forum-en.msi.com/index.php?topic=121960.0

    Quote from: NovJoe on 23-March-09, 14:53:31
    Why don't you want to follow up with your previous thread?
    It'll be confusing when you started multiple threads linking to the issue.
    Sorry, I haven't posted here much so I'm not familiar with the protocols. I just thought it would be less confusing to make this a separate issue. I linked them to avoid duplicating info on my config & h/w

  • Spinning gear on startup after update

    After updating my mac mini to OS 10.9 all I get is the spinning gear upon startup. Tried booting in safe mode but got the same result. Is there a way to fix this without reinstalling the OS. Thanks

    According to the link below, this is a problem with the display server crashing and that you can boot the Mini if you unplug the display, give it a few minutes, and then plug in the display:
    http://medievalcode.com/blog/2013/07/30/osx-mavericks-developer-preview-4-boot-s tuck-on-wheel/

  • I always get the following error msg when trying to update add-ons "Invalid file hash (possible download corruption) -261"

    I get the following error msg when I try to update add-ons ...
    ErrorFirefox could not install the file at
    http://releases.mozilla.org/pub/mozilla.org/addons/1865/adblock_plus-1.2.2-fx+sm+tb+fn.xpi
    because: Invalid file hash (possible download corruption)
    -261
    Why, and is there a solution. Im fully patched on osx.
    + Fredrik

    * "Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    You can also try to enable third-party cookies<br />
    Firefox > Preferences > Privacy > Cookies: [X] "Accept third-party cookies"
    See [[Disabling third party cookies]] (you need to enable)

  • Mac Mini shuts down during startup after update

    I've got a Late 2009 Mac Mini running Snow Leopard Server. Occasionally, it takes me awhile to restart after updates, so this could be due to the most recent update or possibly the combination of the last two...
    I went into my office, saw that there was a Safari update and decided to let it do its thing. When I came back 30 minutes later, my machine was off. I turned my machine back on, got the gray Apple screen with the spinning cog and the progress indicator for the update. A little over 10% through, the progress indicator reset. No biggie, I figured. Second time it got to the same point, it just shut down. Nada. When I restart, it does the same thing.
    I've tried resetting PRAM.
    I've tried resetting SMC.
    I've tried booting in safe mode, but that isn't working at all – just does the same thing as when I (fail to) boot normally.
    Everything but one of my screens and my keyboard is disconnected. ****, I even tried booting without either one connected (I just waited to see if it would turn off), and it failed.
    Can't think of or find anything else.
    Anyone?

    Humm.. you'll need to startup from your System Install Disc to test, repair or restore from Time Machine.
    Some options for Starting up from your Install Disc include:
    1. in an External Optical DVD Drive.
    2. from another iMac in Target Disk Mode.
    3. from a copy on a Thumb Drive or External HD.
    It's to bad that you are using Time Machine on the second HD instead of a clone with Carbon Copy Cloner - Home or SuperDuper! that you could boot from for testing, repairing and/or restoring.
    If none of the above helps?
    There is one good thing about a Mac Mini, it is much easier to tote into the local Apple Store or AASP than an iMac. see > Apple - Support - iMac - Service FAQ

  • Error msg during startup

    During startup I get this error msg: Windows cannot find C:\Program Files (X86)Adobe\Reader9.0\Reader\Reader_SL.exe. I was running Adobe10 so I uninstalled that and installed Adobe9 and over that I installed Adobe10. It didn't work, the error msg is still there during startup. Thanks for any help.

    Your approach was correct; upgrading from Reader 9 to 10 should have completely uninstalled Reader 9.
    Unfortunately it did not; possible fix:
    uninstall Reader 10
    install Reader 9
    uninstall Reader 9
    install Reader 10
    However, there is still no guarantee that manually uninstalling Reader 9 will remove that startup item.
    What I would do: manually remove that item from the startup list.  There are quite a number of tools that can help you with that: msconfig, CCleaner, Startup Inspector, Autoruns, ...

  • Error msg in workflow after patching to 11.1.2.1.600

    Hi!
    We have recently patched to 11.1.2.1.600 for our Planning solution and we get an error msg in workflow.
    If the 'Planning Unit Hierarchy' is setup as 'Free form' we get an error message if the users open 'Manage Approvals', select 'Details' for a Planning Unit and then 'Change status'. The error message is 'There is no valid action that can be performed on the selected Planning Units'. If the 'Planning Unit Hierarchy' is set up as 'Bottom up' it works fine.
    Have anyone else experienced this behavior in the 11.1.2.1.600-patch? Is there a workaround?
    An SR is also raised towards Oracle, so hopefully we get an answer from them soon.
    Grateful for all answers!
    BR,
    Martin

    We're having this issue after installing the 11.1.2.1.600 patch over .102 as well (this didn't come up as known issue), and the workaround of "use Bottom Up" doesn't work for us, because we want multiple planners in an organizational division to be able to write to the same PU at the same time. You can't do that with Bottom Up, because only one person can have control at a time.
    So... the .601 patch still doesn't exist, and uninstalling the .600 patch didn't fix the issue. Support basically says, "it's a bug, use the workaround".
    So frustrating!

  • HT201210 error msg when trying to update my iphone 4 to latest software: this device isnt eligible for the requested rebuild.

    Can anyone advise why I am getting this error msg? I have the latest version of itunes and my mac software is upto date.
    Many Thanks xx

    I am having the same issue. I just had the battery replaced at a third party store. The battery powers the ipod up but it needs to be restored. It is saying it isn't eligible for rebuild. I am running MAC OS 10.4.11  itunes v. 9.0   and I just want it to be restored. I need help.  Oh and its an 8 gb ipod touch.

  • Creative Cloud (app) crashes on startup after update

    After the last update (which probably went wrong), creative cloud application (the menubar app) crashes on startup.
    I've tried uninstalling (uninstaller stalls) and running Creative Cloud Cleanup Tool but to no avail.
    Below I've included  an excerpt of the crash report from the log (I could post the complete log report but that seems to cause troubles posting).
    Anybody have any suggestions?
    Process:         Creative Cloud [38993]
    Path:            /Applications/Utilities/Adobe Creative Cloud/*/Creative Cloud.app/Contents/MacOS/Creative Cloud
    Identifier:      com.adobe.acc.AdobeCreativeCloud
    Version:         1.7.2.419 (???)
    Code Type:       X86 (Native)
    Parent Process:  launchd [246]
    Responsible:     Creative Cloud [38993]
    User ID:         501
    Date/Time:       2014-09-07 11:10:17.416 +0200
    OS Version:      Mac OS X 10.9.4 (13E28)
    Report Version:  11
    Anonymous UUID:  6E543C7B-7F96-DDC0-12C2-F9018C309437
    Crashed Thread:  39
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x00000000ab2ad4ca
    VM Regions Near 0xab2ad4ca:
        Submap                 00000000a1911000-00000000a1a00000 [  956K] r--/rwx SM=PRV  process-only VM submap
    --> Submap                 00000000a1a00000-00000000b0000000 [230.0M] r--/rwx SM=SHM  machine-wide VM submap
        __UNICODE              00000000a5911000-00000000a5999000 [  544K] r--/r-- SM=COW  /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    Thread 0:: CrBrowserMain  Dispatch queue: com.apple.main-thread
    0   libsystem_kernel.dylib         0x97151f7a mach_msg_trap + 10
    1   libsystem_kernel.dylib         0x9715116c mach_msg + 68
    2   com.apple.CoreFoundation       0x913a0bf9 __CFRunLoopServiceMachPort + 169
    3   com.apple.CoreFoundation       0x913a01d1 __CFRunLoopRun + 1393
    4   com.apple.CoreFoundation       0x9139f9ea CFRunLoopRunSpecific + 394
    5   com.apple.CoreFoundation       0x9139f84b CFRunLoopRunInMode + 123
    6   com.apple.HIToolbox           0x929bab5d RunCurrentEventLoopInMode + 259
    7   com.apple.HIToolbox           0x929ba8e2 ReceiveNextEventCommon + 526
    8   com.apple.HIToolbox           0x929ba6bd _BlockUntilNextEventMatchingListInModeWithFilter + 92
    9   com.apple.AppKit               0x972eb349 _DPSNextEvent + 1602
    10  com.apple.AppKit               0x972ea870 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
    11  com.apple.AppKit               0x972dd15c -[NSApplication run] + 727
    12  libcef.dylib                   0x032c9287 0x2ec8000 + 4199047
    13  libcef.dylib                   0x032c8d5c 0x2ec8000 + 4197724
    14  libcef.dylib                   0x032fa3a1 0x2ec8000 + 4400033
    15  libcef.dylib                   0x0331293e 0x2ec8000 + 4499774
    16  libcef.dylib                   0x032f9ada 0x2ec8000 + 4397786
    17  libcef.dylib                   0x0398675f 0x2ec8000 + 11265887
    18  HEX.dylib                     0x02245a23 HEXMessageProcessor::runLoop(std::string const&) + 403
    19  HEX.dylib                     0x02238743 0x2232000 + 26435
    20  HEX.dylib                     0x0224b6ad HEXMessageProcessor::processMessage(std::string const&, std::string const&, ProcessMessageOutput&, MessageObject const&) + 77
    21  HEX.dylib                     0x02236ef6 processMessage + 230
    22  NXGCore.dylib                 0x00221eab ExternalGateway::sendMessageToApplet(MessageObject const&, MessageStruct const*, bool (**)(void const*), char const**) + 635
    23  NXGCore.dylib                 0x00221a17 ExternalGateway::handleMessage(MessageObject const&, MessageStruct const*, bool (**)(void const*), char const**) + 151
    24  NXGCore.dylib                 0x00222392 ExternalGateway::processMessageFromOutside(MessageStruct const*, bool (**)(void const*)) + 354
    25  NXGCore.dylib                 0x0020b07a processMessage + 42
    26  com.adobe.acc.AdobeCreativeCloud 0x00063938 0x5d000 + 26936
    27  com.adobe.acc.AdobeCreativeCloud 0x00067661 0x5d000 + 42593
    28  com.adobe.acc.AdobeCreativeCloud 0x0005ffd6 0x5d000 + 12246
    29  com.adobe.acc.AdobeCreativeCloud 0x0005f093 0x5d000 + 8339
    30  com.adobe.acc.AdobeCreativeCloud 0x00064038 0x5d000 + 28728
    31  com.adobe.acc.AdobeCreativeCloud 0x0005ecd5 start + 53
    Thread 39 Crashed:
    0   libstdc++.6.dylib             0x9718d6c4 std::string::find(char const*, unsigned long, unsigned long) const + 14
    1   com.adobe.AAM.AdobeUpdaterCoreFramework 0x0c9e2b9e ThreadGetAvailableUpdates::ThreadProc() + 16172
    2   com.adobe.AAM.AdobeUpdaterCoreFramework 0x0c9e99a1 ESDThread<ThreadGetAvailableUpdatesStatus>::ESDThreadFunctorDelegate<ThreadGetAvailableUp datesStatus>::operator()() + 51
    3   com.adobe.AAM.AdobeUpdaterCoreFramework 0x0c9e97c4 boost::detail::thread_data<ESDThread<ThreadGetAvailableUpdatesStatus>::ESDThreadFunctorDe legate<ThreadGetAvailableUpdatesStatus> >::run() + 22
    4   com.adobe.AAM.AdobeUpdaterCoreFramework 0x0ca87b1b thread_proxy + 73
    5   libsystem_pthread.dylib       0x90deb5fb _pthread_body + 144
    6   libsystem_pthread.dylib       0x90deb485 _pthread_start + 130
    7   libsystem_pthread.dylib       0x90df0cf2 thread_start + 34
    Thread 40:
    0   libsystem_kernel.dylib         0x97156b76 __semwait_signal + 10
    1   libsystem_c.dylib             0x969e6fb7 nanosleep$UNIX2003 + 219
    2   libsystem_c.dylib             0x969e6e62 usleep$UNIX2003 + 60
    3   AppsPanelIL.dylib             0x0c3585c8 UpdaterCoreHelper::ProgressUpdatesCallback(bool) + 2248
    4   AppsPanelIL.dylib             0x0c3573e3 0xc263000 + 1000419
    5   AppsPanelIL.dylib             0x0c360d6c timerThread(void*) + 76
    6   AppsPanelIL.dylib             0x0c39a950 threadProcHandlerMac(void*) + 48
    7   libsystem_pthread.dylib       0x90deb5fb _pthread_body + 144
    8   libsystem_pthread.dylib       0x90deb485 _pthread_start + 130
    9   libsystem_pthread.dylib       0x90df0cf2 thread_start + 34
    Thread 39 crashed with X86 Thread State (32-bit):
      eax: 0x7d20ff10  ebx: 0x0cc8a6d8  ecx: 0x0cc8a6d8  edx: 0x0cc8a6d0
      edi: 0x0c9dec83  esi: 0xab2ad4d6  ebp: 0xb6cad228  esp: 0xb6cad200
       ss: 0x00000023  efl: 0x00010286  eip: 0x9718d6c4   cs: 0x0000001b
       ds: 0x00000023   es: 0x00000023   fs: 0x00000023   gs: 0x0000000f
      cr2: 0xab2ad4ca
    Logical CPU:     7
    Error Code:      0x00000004
    Trap Number:     14
    External Modification Summary:
      Calls made by other processes targeting this process:
        task_for_pid: 3
        thread_create: 0
        thread_set_state: 0
      Calls made by this process:
        task_for_pid: 0
        thread_create: 0
        thread_set_state: 0
      Calls made by all processes on this machine:
        task_for_pid: 516725
        thread_create: 6
        thread_set_state: 0
    VM Region Summary:
    ReadOnly portion of Libraries: Total=251.6M resident=103.3M(41%) swapped_out_or_unallocated=148.3M(59%)
    Writable regions: Total=328.1M written=28.3M(9%) resident=63.8M(19%) swapped_out=0K(0%) unallocated=264.3M(81%)
    REGION TYPE                      VIRTUAL
    ===========                      =======
    CG backing stores                  1484K
    CG image                           2296K
    CG raster data                       24K
    CG shared images                    196K
    CoreAnimation                      2432K
    CoreAnimation (reserved)              8K        reserved VM address space (unallocated)
    CoreServices                        128K
    Foundation                            4K
    IOKit                              5192K
    IOKit (reserved)                     64K        reserved VM address space (unallocated)
    Image IO                           4208K
    Kernel Alloc Once                     4K
    MALLOC                            159.3M
    MALLOC (admin)                       48K
    Memory Tag 242                       12K
    OpenGL GLSL                        1280K
    Stack                             195.2M
    VM_ALLOCATE                        17.0M
    WebKit Malloc                      1216K
    __DATA                             17.3M
    __IMAGE                             528K
    __IMPORT                              4K
    __LINKEDIT                         52.2M
    __OBJC                             2504K
    __PAGEZERO                            4K
    __TEXT                            199.4M
    __UNICODE                           544K
    mapped file                       158.0M
    shared memory                        68K
    ===========                      =======
    TOTAL                             820.0M
    TOTAL, minus reserved VM space    820.0M

    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Photoshop crashing on startup after update

    Hello.  I just updated my photoshop cc and now it will not open...again. This happened last time I updated also. 4 days ago I applied this fix ( Re: Photoshop CC crashes after startup due to application error in PlugPlugOwl.dll? ) and it worked. I saw a new update so, silly me, I updated again. This time the above mentioned fix does not work. By the way, my drivers are up to date.
    Thank you in advance for your help.

    I have been having a similar problem since the 2014.2.0 update. Every time I quit PS, and relaunch, I get a "Could not initialize Photoshop because of a program error.". It won't load at all. I can delete the preferences file by holding in CMD+OPT+SHIFT and clicking the app. It will then load. I download my preferences from the cloud and can work fine until the next restart when it won't load again. I was hoping today's 2014.2.1 update would fix it, but it did not. I still have the same trouble.
    I have completely uninstalled and reinstalled PS, rebooted the computer, tried restarting PS without downloading any synced preference files and it still will not load unless I delete the existing preferences every single time. So frustrating!
    Running Mac 10.9.5

Maybe you are looking for