CUDA Rendering with GTX 770 doesn't work!

I cant render with my GTX 770! AE CC Version 12.1.
I've tried everything! Other Driver's for the GTX. Try to delete the Card from the List an klick on "Unsupported GPU enabled for CUDA acceleration" .... NOTHING WORK FOR ME! The GPU is everytime at ~0% Load ...
Sorry for Bad English

It seems that you misunderstand what the GPU is used for.
The GPU is used for very little in After Effects. Unless you are using the ray-traced 3D renderer, no rendering will be done on the GPU.
See this:
http://blogs.adobe.com/aftereffects/2012/05/gpu-cuda-opengl-features-in-after-effects-cs6. html

Similar Messages

Z87-G45 firmware 1.8, MSI GTX 770 doesn't work

this is really :censored:ing me off
after flashing the new firmware with mflash (i selected bios firmware + ME) my GTX doesn't display on my monitor anymore. i tested with several other monitors and removed the card from the MOBO and it was able to display using the integrated graphics.
I set the bios to display with both the internal and external graphics to force the display so I can troubleshoot the issue. the MOBO sees the 770 in the hardware monitor but its not able to use it. everything is plugged into the card (2 8pin power slots) and it was working before the upgrade.
i reflashed several times and cleared the CMOS with no success and the OS is able to see the card in the device manager...
the card works fine on my other gigabyte MOBO.
everything was great until I flashed the new update

Quote from: flobelix on 22-July-14, 00:14:37
If driver uninstall/reinstall suggested does not work reflash the bios.
>>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive (180.rar) and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB
G.) Now follow the directions and let the tool flash
H.) After flashing reinstall ME drivers in Windows: http://download.msi.com/dvr_exe/intel_me90_mb.zip
If still no help Try the attached vbios (3D0).
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.
Driver install/update = FAILED... drivers was uninstalled and freshly installed... no change
BIO flash = FAILED... still no change
vbios flash = FAILED... no luck
played around with the bios settings and i managed to get...... something
i'm starting to guess that its the card...

[BUG]: af:commandButton rendered with requestScope variable doesn't work

This took me two days to figure out, and I wonder if it is a bug:
I have a page that can be navigated to on two occassions, let's call them "left" and "right". I want the page to know what side I came from, so I set a requestScope variable on the buttons that navigate to this page, a bit like this:
<af:commandButton action="toPage">
<af:setActionListener from="left" to="#{requestScope.sideFrom}"/>
</af:commandButton>I have two buttons on the page, one is to navigate back to the left and one to navigate back to the right. Only one is rendered, depending on the requestScope.sideFrom variable.
One says rendered="#{requestScope.sideFrom eq 'left'}" and the other says rendered="#{!requestScope.sideFrom eq 'left'}"
Only one button works, namely the one for which the rendered property evaluates to true <b>when the button is pressed</b>!! My requestScoped variable doesn't exist anymore when I press the button to navigate back so it's behavior is changed. How weird is that?
Should I file a bug?
I refuse to make it a sessionScoped variable and change it back with the return buttons Imho this is what requestScope is for.
I am on JDeveloper 11.1.1.6

Wendy,
To amplify what Timo rightly says: as JSF goes through its merry lifecycle, one of the steps is to rebuild the component tree in memory. When you use the rendered property, that particular component is not in the component tree - it's as if it doesn't even exist according to JSF. Then, when it comes time to deal with events, the event isn't seen or is ignored (I don't know which) because JSF doesn't think that component is present. As Timo also rightly says - this behaviour is why the "visible" attribute was created.
John

Why tethering with USB cable doesn't work after IOS6.0 update?

why tethering with USB cable doesn't work after IOS 6.0 update?

Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot

ITunes 10.4 full screen with Win7-64bit doesn't work correctly.

iTunes 10.4 full screen with Win7-64 doesn't work correctly. I have the Windows taskbar on the left side of my screen. Maximized iTunes is panned to the left.

Same issue here. When the Windows taskbar is position on the top of the screen and then the iTunes windows is maximised, it's position is as if the Windows taskbar is at the bottom of the screen so the top of the iTunes window sits under the taskbar.
For those wanting a workaround, hold shift and right click the iTunes icon in the taskbar/quick launch bar and click restore, at least then you can adjust it to be full screen manually.
System:
Windows 7 Ultimate x64
iTunes 10.4
ATI 5750 video card

LAN with TCP/IP doesn't work

Hello,
I have a problem with my laptop IdeaPad S10e 4187-5PG: LAN with TCP/IP doesn't work, after I have updated all the drivers to the latest ones form the Lenovo site (except BIOS update). I tried to check if LAN worksby sending a ping to the IP address and that is OK, but when Isend a ping to the default gateway it failes. A ping to the DNS server also fails.Could you please help me because I tried everythinh and I can't getthe LAN to work.
Thank you very much

Perhaps you could describe you network in a little more detail.
Is this a Workgroup home network or are you connected to a Domain server?
If this is a workgroup are you connecting to the internet via a cable or DSL router?
Do other computers on your network connect OK?
Has your S10e ever worked properly on the network?
Are you connecting via a wireless access point or LAN cable?
What do you Ping on and from where?
Can you Ping OK on another networked computer?
Open up a DOS Prompt (aka command prompt, DOS Box). and type IPCONFIG /ALL <enter>. Do you get a compatible IP address and subnet mask? You should also get the gateway IP address.

In day 4, video # Creating "pages" with Flex states doesn't work

i can't open video training http://www.adobe.com/devnet/flex/videotraining in day 4. it's name( Creating "pages" with Flex states ) doesn't work, it report error. supporter can look it and solve problem

Hi,
I'm also pacing the same issue. if click on the video in the Day 4 exercises. i don't know, what is the issue with that particular videos. and also pacing one more issue that design mode is not showing in my flash builder 4. if u have any ans plz help me out. PFA

Every Programme that it is opened with Adobe Reader doesn't work What Can I do ?

Every Programme that it is opened with Adobe Reader doesn't work What Can I do ?

More information please.
Version of Reader? OS? Can you open reader by double-clicking on its icon? Can you open reader by double-clicking on a pdf file? What programs are trying to open reader? Some programs might be restricting your ability to view pdf files using the Reader plug-in due to security concerns. If this is the case you need to find out how to enable the plug-in in the case of each application.

Comcast came to fix my internet. My AIRPORTWIFI now only works with desktop. it doesn't work with my IPhone or IPad. Why? What can I do?

Comcast came to fix my internet. My AIRPORTWIFI now only works with desktop. it doesn't work with my IPhone or IPad. Why? What can I do?

Hello lila54,
It sounds like your Wi-Fi network is working if your desktop works with it, we just need to get the Wi-Fi on your iPhone and iPad connected to it. I found a couple of resources to help with not being able to connect to Wi-Fi on an iOS device.
I recommend following the steps in this tutorial first (the steps should work on the iPhone and iPad):
Join a network
http://www.apple.com/support/iphone/assistant/wifi/
If you are still having trouble connecting to Wi-Fi, follow the steps in this article (you can skip any steps you have already taken):
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Renderer: Ray-traced 3D - doesn´t work

MacPro 10.8.2 After Effects CS6 11.0.0.378 CUDA 5.0.37
Hi,
I have a problem whith raytrace 3D renderer...
3D form/ Objects rendered with raytraced 3d worked without any problems the last month.
But now when I switch a layer into a 3d layer i cant´t see it any more.. please check out example
[img]http://up.picr.de/13654216rm.jpg[/img]
but when I change the preview to "fast layout" i can see the 3D Layers..please have look to the example again
[img]http://up.picr.de/13654464ff.jpg[/img]
I don´t know what I have changed?! Maybe it happend when I updated to CUDA 5. ??
I tried to updated back to 4.. but its not working I also installed AE new ..but no change!
thanks for any help, Jakob

..I installed the AE updates you posted. No change..
the GPU is a "PNY PCIe 2048MB Quadro 4000 Apple MAC Retail" [img]http://up.picr.de/13655875kl.png[/img]
..i also made a GPU update "Quadro & GeForce Mac OS X Driver Release 304.00.05"
No change..
..any other idea?
Thanks for any help/ comment, Jakob

HT1688 The friend brought to me from the USA iphone 4. I can't use it at all. It with our operators doesn't work. I very much ask you help me to solve a problem.

The friend brought to me a gift from the USA, and it doesn't work year. Our operators don't understand it. Help me to unblock iphone4
<Edited by Host>

This has nothing to do with iPhones in the Enterprise.
Sounds like your friend is a bit dumb and bought a carrier locked iPhone. The only way to address this is to contact the carrier to whom the device is locked and find out their unlock policy.
Oh, and stop being dumb yourself, posting IMEI, serial numbers, and email addresses on a public forum is just plain stupid.

Forgot my adminpassword, i have tried the reboot with initial disk doesn't work i can't downlad anything, I am able to log on but the name and password to get in my computer doesn't work for admin password. i am about to give up any suggestions?macbook10

forgot my adminpassword, i have tried the reboot with initial disk didn't work, i am able to get into my computer with name and password, but this same name and password doesn't work as an administrators password when i want to download or change things.
do you have any suggestions? Im about to give up, i can't even access wireless have to use a dsl
pretty sad

... this same name and password doesn't work as an administrators password when i want to download or change things.
It's probably that your Keychain password is not the same as your login password. If you configured your computer to log you in automatically, you may not have used your login password in so long you forgot it.
There is no way to retrieve the "login" Keychain password, but you can reset the Keychain from the Preferences menu: select it in the Keychain Access menu and select "Reset My Default Keychain". This will create a new, empty Keychain but the old one will be saved should you ever remember its password.
The result of this is that you will have to supply passwords for everything that requires it, since without your Keychain they will no longer automatically fill themselves. However, once you supply them and store them in your new Keychain, they will be remembered.

Apple Keyboard with number pad doesn't work with Mac Pro?

I have a Mac Pro, and have used an Apple Keyboard with a number pad (not bluetooth) with it for quite a while, with no problems. But then my keyboard broke and I ordered a replacement Apple Keyboard with a number pad (not bluetooth). This keyboard doesn't work with my Mac Pro. I have it plugged in, but I can't get the Mac Pro to consistently recognize that there is a USB keyboard connected to it. What magical stuff do I have to do to get the keyboard to be fit for purpose?

It would not hurt to try an SMC Reset. (But if it does not help, it adds credence to lllaass assertion that the keyboard is not working.)
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

Change user's OU with punctuation mark doesn't work by Rename User View

Hi,
I have problem with moving user between OU by Rename User View when punctuation mark in name of OU is used.
I have own WF that assign user to specific OU depending on value of Select component. When value of this component is changed (against previous value) I call Rename View, that assign user to new OU. For OU without punctuation mark Rename View works OK.
After finishing WF with punctuation mark in OU this Error appers:
java.lang.RuntimeException: There is no such object on the server.
But creating new AD account (by role assignment) in OU with punctuation work OK. In select component is rule that replace puctional character in correct form.
Select component:
<Field name='slctOrganizationalUnitUzivatele'>
                <Display class='Select' action='true'>
                    <Property name='title' value='Nastavte organizacni jednotku:'/>
                    <Property name='allowedValues'>
                        <block>
                            <dolist name='zmena'>
                                <invoke name='listResourceObjects' class='com.waveset.ui.FormUtil'>
                                    <invoke class='com.waveset.session.SessionFactory' name='getServerInternalContext' />
                                    <s>OrganizationalUnit</s>
                                    <s>AD</s>
                                    <null/>
                                    <s>false</s>
                                </invoke>
                                 <rule name="RUL nahrada znaku">
                                    <argument name="inputString">
                                        <ref>zmena</ref>
                                    </argument>
                                    <argument name='hledanyRetezec'>
                                        <s>\,</s>
                                    </argument>
                                    <argument name='nahrazovaciRetezec'>
                                        <s>\, </s>
                                    </argument>
                                </rule>
                             </dolist>
                        </block>
                    </Property>
                    <Property name='sorted'>
                        <Boolean>true</Boolean>
                    </Property>
                </Display>
                <Default>
                    <upcase>
                        <ref>user.accounts[AD].ad_container</ref>
                    </upcase>
                </Default>
            </Field>
WF-Rename User
<Activity id='10' name='renameUzivatele'>
        <Action id='0' application='com.waveset.session.WorkflowServices'>
          <Argument name='op' value='checkoutView'/>
          <Argument name='type' value='RenameUser'/>
          <Argument name='id' value='$(user.waveset.accountId)'/>
          <Argument name='authorized' value='true'/>
          <Return from='WF_ACTION_ERROR' to='error'/>
          <Return from='view' to='renameView'/>
        </Action>
        <Action id='1'>
          <expression>
            <block>
              <set name='renameView.accounts[AD].identity'>
                <ref>newDNrecord</ref>
              </set>
              <set name='renameView.resourceAccounts.currentResourceAccounts[AD].identity'>
                <ref>newDNrecord</ref>
              </set>
              <set name='renameView.resourceAccounts.currentResourceAccounts[AD].selected'>
                <s>true</s>
              </set>
              <set name='user.global.OrganizationalUnit'>
                <ref>slctOrganizationalUnitUzivatele</ref>
              </set>
            </block>
          </expression>
        </Action>
        <Action id='2' application='com.waveset.session.WorkflowServices'>
          <Argument name='op' value='checkinView'/>
          <Argument name='view' value='$(renameView)'/>
          <Argument name='authorized' value='true'/>
        </Action>
        <Transition to='nastaveniPristupu-overeni'/>
        <WorkflowEditor x='193' y='343'/>
      </Activity>
<set name='newDNrecord'>
                <concat>
                  <s>CN=</s>
                  <ref>user.global.fullname</ref>
                  <s>,</s>
                  <ref>slctOrganizationalUnitUzivatele</ref>
                </concat>
              </set>Do you have any ideas?
Thanks Petr

Hi,
I discovered following:
- if name of OU in AD is without space (e.g. test,sample) so DN record is test\,sample and user is moved into this OU.
- if name of OU in AD is with space (e.g. test, sample) so DN record is still test\,sample and user isn't moved.
So problem is with empty space. How can I preserve space in DN name? I found something in documentation but I doesn't work for me.
+Special Characters in FieldValues
If you have a field value with a comma (,) or double quote (") character, or you want to preserve leading or trailing spaces, you must embed your field value within a pair of double quotes ("field_value"). You then need to replace double quotes in the field value with two double quote (") characters. For example, "John ""Johnny"" Smith" results in a field value of John "Johnny" Smith. +
(from IDM Business Administrator's Guide, p.77)
Guided this information I put value of slctOrganizationalUnitUzivatele into "". But this didn't work. Is good idea to have space in DN?
Thanks for help.
Petr
Edited by: petrklinkovsky on Sep 10, 2009 5:06 AM

Filter Web Template with URL Cmd: doesn't work with compound infoobject ?

Hello all,
I've to filter the query contained on a web template with URL command, but it doesn't work.
The web template contains only one query, and on the free chars I have 0PLANT.
I call the web template adding to the normal url the following command:
&FILTER_IOBJNM=0PLANT&FILTER_VALUE=33
where 33 is the code of the plant I want to filter.
The command is executed, I think, because the result is "NO APPLICABLE DATA FOUND". The fact is that when I execute this query on the Bex filtering 0PLANT by value 33 the data exists.
May be because 0PLANT on our system is in compound with 0SOURSYSTEM ? In this case, what's the value I can use as filter ?
Thank's in advance,
Max

Hi,
please see http://help.sap.com/saphelp_nw04/helpdata/en/59/edfe395dd76846e10000000a114084/frameset.htm
especially:
If the variant with ending 'EXT' is selected, the fully compounded value has to be entered in the external format, for example, 24.12.2000.
If the ending 'EXT' is not used, the fully compounded value has to be entered in the internal format, for example, 20001224 for 24.12.2000.
and
In the internal display (see table below) you can easily determine the name of the characteristic and the filter value using the URL parameter &snippet_operations=%20 (see also Object Tag for the Properties of Web Templates). Call the Web application with this URL parameter. If you filter using the context menu, the parameters FILTER_IOBJNM and FILTER_VALUE are automatically added to the URL in the Web browser. You can then use the desired values with Command URLs in hyperlinks.
Heike

CUDA Rendering with GTX 770 doesn't work!

Similar Messages

Maybe you are looking for