CUE 8.0(1) unable to start automatically after reboot CME

Hi
I have an issue with CUE (ISM) 8.0.1
When the router has been reboot it then the CUE module its not restarted Automatically
I have to login on cue module via cli and write the command BOOT DISK in order to start the CUE module
ServicesEngine boot-loader> boot disk
Loading disk:/bzImage ... Verifying ... done.
Starting Kernel.
Pls Advice
thanks

Hi Paolo
could you pls give me a dogumentation or something for the boot loader?
i didnt find anything
thank you

Similar Messages

Will DB start automatically after rebooting the computer?

Will DB start automatically after rebooting the computer?

user9947478 wrote:
Will DB start automatically after rebooting the computer?Yes. IF you set it up to do so. Or you have an OSs for which it is installed to automatically do so and you have not disabled it.
I assume, since it seems to be difficult for you to tell us what operating system you use, that you use some form of Windows. In which case, the answer is 'Yes, automatically set up - as seen by the Services'.
(Windows users don't seem to realize there are other OSs and therefore don't tell. They also don't realize that Windows is not an OS, but rather the marketing label for a whole families of OS Editions. Some popular families are: Windows XP, WIndows 2003, Windows 2008, Windows 7. But even then, Oracle only works on specific Editions within the family.)

Listener service not start automatically after reboot in Win2K server Clust

Hi all,
I set up a two node Server Cluster with Microsoft Windows 2000 server cluster service. Hardware are two HP DL380 servers and HP MSA500 (the shared storage). The cluster's IP address is 10.1.241.65. When I shut down both servers and restart the primary server, the listener server service will not start automatically. The listener log is:
Started with pid=1108
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.241.65)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
The service is set up automatically start. I suspect the cluster virtual IP is not available immediately after reboot. So I tried setting the Recovery after first failure and second failure to 3 minitues each, and setting up Dependencies of the listener on the cluster service in the Win2K Service panel. Neither worked.
The service can be manually start.
Any suggestion?
Frank.

The command to start automatically the listener is :
lsnrctl start
check the parameters in : <ORACLE_HOME>/network/admin/listener.ora
check the IP address or host name
Joel Pérez

IPhoto 6 starts automatically after reboot, how to avoid ?

Every time I reboot my Imac, Iphoto starts automatically.
It is not active in Accounts / Login Items
Also no camera is attached to the computer; The settings for ImageCapture are to launch EOS Utility if a camera would be attached.
Any clues ?
Thanks,

Xinram
Right click on the iPhoto icon in the Dock, see if 'Open at Log in' is checked.
Do you have a FAT format disk or USB flash drive connected to the Mac?
Regards
TD

Ovs-agent starts automatically after reboot but hostname isnt resolvable

Hello Guys,
the theme is the problem. After rebooting a server the ovs-agent starts automatically but the DNS-Name of the SR isnt resolvable.
If I restart the agent by hand everything works fine. I checked the /etc/init.d, where its installed and the rc3.d. ovs-agent got S99 - which means, it starts last.
But which service is responsible for DNS? In my eyes the only thing that must be up, is networking, isnt it?
Do you have any hints for me?
Greetz

Please check your /etc/hosts and make sure that the hostname is on a separate line and not mapped to 127.0.0.1

Oracle does not start automaticly after reboot

I've installed O 9i on win2ksrv after installing DB2.
Then I create a database and this db starts successfully.
After reboot the database is shutdown and can only starts manually by sysdba.

Hi,
Have you checked the space of ORAARCH or SAPARCH folder/directory ? The problem may be "Archive destination full". If its full then try to move some old Offline redo log file to other safe location as a backup and then try to restart the Oracle Instance again.
Regards
Bhavik G. Shroff

MSExchangeSA and IS is not starting automatic at reboot after upgrading the server from SP1 to SP2

I am running a 2 node DAG with separate Hub & CAS servers
I have already upgraded the Hub CAS server and they are fine
Exchange running on Windows 2008 R2 SP1
All are in VM-Ware ESXi 5.0
After I upgrade the mailbox server to SP2 the SA and IS service not starting automatic after reboot
If I run "net time /set" command and then restart ADtopology server, the IS and SA starts fine
But again after reboot they do not start
Also I get the below event in the app log when the IS & SA fails to start
Log Name: Application
Source: MSExchangeIS
Date: 05/22/2012 5:15:03 AM
Event ID: 5003
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: server.domain.com
Description:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either on the client or on the server, and may require a restart of that computer. Verify that your domain is correctly
configured and is currently online.
If I check the Registry for time resource it is taking from the DC
I manually compared the time between DC and Exchange and it is fine
Since the Exchange mailbox is virtual, I checked the time sync on VM-Ware tools and it is "unchecked"
Checked for group policy and do not find any specific to time sync.
Confirmed that Windows Time service is running
Suspecting a Operating system issue, tried to upgrade the other DAG
Even that node is displaying the same symptom and Issues
Tried to install RU1 on both nodes and that too did not fix the issue.
Checked with VM-Ware engineer and he said that every thing from VM-Ware end is fine
Is Anyone have come across the issue before ?

Exchange 2010: Unable to initialize the Information Store
Problem:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either in the client or the server, and may require a reboot of that computer. Verify that
your domain is properly configured and is currently online.
Solution:
Open a cmd prompt from the Exchange Server as administrator (right mouse click on the command prompt shortcut and select “Run as Administrator”)
Run this command
Net time \\ADServerName /Set
Restart the Microsoft Exchange Active Directory Topology Service
*Important!! You have to restart the Microsoft Exchange Active Directory Topology Service or this fix will not work.. I tried just starting the Information Store service after running the command it it still failed..
This worked for me and all is well on my exchange server.
- See more at: http://www.mountainvistatech.com/2012/06/04/exchange-2010-unable-to-initialize-the-information-store/#sthash.SwQpgQEM.dpuf

Automatically start oracle after reboot

Is there a way to automatically start oracle after reboot? Our platform is Soaris 10 and Oracle 10.2.0.1.0

(1) Don't forget to edit $ORACLE_HOME/bin/dbstart. (Note:337927.1)
Original line:
ORATAB=/etc/oratab
Modified line:
ORATAB=/var/opt/oracle/oratab
(2) As per Note:336299.1 use:
dbstart $ORACLE_HOME
or
dbstart /u01/app/oracle/product/10.2.0 (or whatever is your Oracle_Home)
or you'll get: "ORACLE_HOME_LISTNER is not SET, unable to auto-start Oracle Net Listener"
HTH
Enrique

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

Starting OC4J_BI_FORMS automatically after reboot on Win2000

Does any know how to configure OCJ4_BI_FORMS to startup
automatically after rebooting on win2000. Now, I'm manually starting the OC4J_BI_FORMS instance, and would like to automate the startup after reboot.
Thanks in advance
Joe

I think it's controlled by auto-start for your application in %ora9ias_home%\j2ee\OC4J_BI_Forms\config\server.xml.
Reference: http://download-west.oracle.com/docs/cd/A97329_01/web.902/a95880/apdx_a.htm
Yong Huang

Why Portage R700-15P starts automatically after hibernation

Why TOSHIBA Portage R700-15P starts automatically after I hibernate it (or put on sleep) and close the lid?
As soon as I take hibernated laptop with closed lid in my hands to put it into bag - it starts by itself with closed lid...
Had anybody similar issue and solution for this?
Thanks

> Is there any setting for laptop or Windows 7 that does not resumes laptop from hibernate/sleep state when lid is closed?
First of all its not matter if the lid is closed or not one fact is important: notebook is set in hibernation mode and wakes up if USB mouse would be moved
Fact is that BIOS contains some Wake Up options you should check the BIOS settings like Wake Up on LAN, Wake up on keyboard etc disable these options, save the changes and check how it works

Option that SAP starts automaticly after power loss

I am using an windows/sql ECC 6.0 server. I would like option that SAP starts automaticly after power loss. Is it possible and how?

Hi
I think this not possible.
Thanks
Pankaj Kumar

How to startup 10G automatically after reboot????

How to startup 10G automatically after reboot????
Is the same thing that we did with 9i?
Create a script e link this on /etc/rc......?? Is that?
Please send me an example.
Tks,
Paulo Portugal.

Yes, use /etc/rc. The following are 3 start scripts. Modify it to fit it into /etc/rc start/stop model.
==> 1. start the DB:
#!/bin/ksh
# ==> start the DB:
ORACLE_SID=xadv1
export ORACLE_SID
ORACLE_HOME=/software/xadv1_infra
export ORACLE_HOME
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORIG_LD_LIBRARY_PATH
PATH=$ORACLE_HOME/bin:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin:$ORIG_PATH
lsnrctl start
lsnrctl status
PASSWD=`cat $HOME/xadv1/sh/system_passwd.pwd`
sqlplus /nolog<<EOF
connect SYSTEM/$PASSWD as SYSDBA
startup
EOF
#!/bin/ksh
# ==> 2. start infra HTTP
ORACLE_SID=xadv1
export ORACLE_SID
ORACLE_HOME=/software/xadv1_infra
export ORACLE_HOME
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORIG_LD_LIBRARY_PATH
export LD_LIBRARY_PATH
PATH=$ORACLE_HOME/bin:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin:$ORIG_PATH
export PATH
echo "############# Starting OPMN ############################"
opmnctl startall
echo "############# Starting EM ############################"
emctl start iasconsole
echo "############# OPMN Status ############################"
opmnctl status
#!/bin/ksh
# ==> 3. start iAS
ORACLE_SID=xadv1
export ORACLE_SID
ORACLE_HOME=/software/xadv1_ias
export ORACLE_HOME
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORIG_LD_LIBRARY_PATH
PATH=$ORACLE_HOME/bin:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin:$ORIG_PATH
echo "############# Starting OPMN ############################"
opmnctl startall
echo "############# Starting EM ############################"
emctl start iasconsole
echo "############# OPMN Status ############################"
opmnctl status

Unable to start xorg after latest nvidia update

Hi,
I have NVIDIA GeForce GTX 750 card. I did update to version 346.47 of nvidia driver and figured out that after reboot SDDM dont start. I disabled login manager and tried to start xorg server manually but without success. I see that there is segmentation fault in log but don't understand where it comes from exectly.
Output of /var/log/Xorg.0.log:
[ 18.250]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 18.251] X Protocol Version 11, Revision 0
[ 18.251] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 18.251] Current Operating System: Linux lolik-pc 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 18.251] Kernel command line: \boot\vmlinuz-linux rw root=UUID=d0592c05-2ed2-4bd2-be47-6a2762e5c3c3 rootfstype=ext4 initrd=boot\initramfs-linux.img
[ 18.252] Build Date: 22 February 2015 12:50:32PM
[ 18.253]
[ 18.253] Current version of pixman: 0.32.6
[ 18.254] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.254] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.255] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 28 13:33:14 2015
[ 18.260] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.261] (==) No Layout section. Using the first Screen section.
[ 18.261] (==) No screen section available. Using defaults.
[ 18.261] (**) |-->Screen "Default Screen Section" (0)
[ 18.261] (**) | |-->Monitor "<default monitor>"
[ 18.261] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.261] (==) Automatically adding devices
[ 18.261] (==) Automatically enabling devices
[ 18.261] (==) Automatically adding GPU devices
[ 18.267] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 18.267] Entry deleted from font path.
[ 18.267] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 18.271] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 18.271] Entry deleted from font path.
[ 18.271] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 18.272] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 18.272] Entry deleted from font path.
[ 18.272] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 18.272] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 18.272] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.272] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.272] (II) Loader magic: 0x815d80
[ 18.272] (II) Module ABI versions:
[ 18.272] X.Org ANSI C Emulation: 0.4
[ 18.272] X.Org Video Driver: 19.0
[ 18.272] X.Org XInput driver : 21.0
[ 18.272] X.Org Server Extension : 9.0
[ 18.273] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 18.273] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 18.273] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 18.273] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 18.273] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 9 paused 0
[ 18.274] (--) PCI: (0:0:2:0) 8086:0412:1458:d000 rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 18.274] (--) PCI:*(0:1:0:0) 10de:1380:1462:3102 rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 18.274] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 18.274] (II) LoadModule: "glx"
[ 18.275] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.342] (II) Module glx: vendor="NVIDIA Corporation"
[ 18.342] compiled for 4.0.2, module version = 1.0.0
[ 18.342] Module class: X.Org Server Extension
[ 18.343] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 18.343] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 18.343] loading driver: nvidia
[ 18.343] (==) Matched nvidia as autoconfigured driver 0
[ 18.343] (==) Matched nouveau as autoconfigured driver 1
[ 18.343] (==) Matched nv as autoconfigured driver 2
[ 18.343] (==) Matched intel as autoconfigured driver 3
[ 18.343] (==) Matched nouveau as autoconfigured driver 4
[ 18.343] (==) Matched nv as autoconfigured driver 5
[ 18.343] (==) Matched modesetting as autoconfigured driver 6
[ 18.343] (==) Matched fbdev as autoconfigured driver 7
[ 18.343] (==) Matched vesa as autoconfigured driver 8
[ 18.343] (==) Assigned the driver to the xf86ConfigLayout
[ 18.343] (II) LoadModule: "nvidia"
[ 18.344] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 18.349] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 18.349] compiled for 4.0.2, module version = 1.0.0
[ 18.349] Module class: X.Org Video Driver
[ 18.350] (II) LoadModule: "nouveau"
[ 18.350] (WW) Warning, couldn't open module nouveau
[ 18.350] (II) UnloadModule: "nouveau"
[ 18.350] (II) Unloading nouveau
[ 18.350] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 18.350] (II) LoadModule: "nv"
[ 18.350] (WW) Warning, couldn't open module nv
[ 18.350] (II) UnloadModule: "nv"
[ 18.350] (II) Unloading nv
[ 18.350] (EE) Failed to load module "nv" (module does not exist, 0)
[ 18.350] (II) LoadModule: "intel"
[ 18.350] (WW) Warning, couldn't open module intel
[ 18.350] (II) UnloadModule: "intel"
[ 18.350] (II) Unloading intel
[ 18.350] (EE) Failed to load module "intel" (module does not exist, 0)
[ 18.350] (II) LoadModule: "modesetting"
[ 18.350] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.350] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.350] compiled for 1.17.1, module version = 1.17.1
[ 18.350] Module class: X.Org Video Driver
[ 18.350] ABI class: X.Org Video Driver, version 19.0
[ 18.350] (II) LoadModule: "fbdev"
[ 18.350] (WW) Warning, couldn't open module fbdev
[ 18.350] (II) UnloadModule: "fbdev"
[ 18.350] (II) Unloading fbdev
[ 18.350] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 18.350] (II) LoadModule: "vesa"
[ 18.350] (WW) Warning, couldn't open module vesa
[ 18.350] (II) UnloadModule: "vesa"
[ 18.350] (II) Unloading vesa
[ 18.350] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 18.350] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 18.350] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 18.351] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.351] (++) using VT number 1
[ 18.351] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 18.351] (II) Loading sub module "fb"
[ 18.351] (II) LoadModule: "fb"
[ 18.351] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.352] (II) Module fb: vendor="X.Org Foundation"
[ 18.352] compiled for 1.17.1, module version = 1.0.0
[ 18.352] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.352] (II) Loading sub module "wfb"
[ 18.352] (II) LoadModule: "wfb"
[ 18.352] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 18.353] (II) Module wfb: vendor="X.Org Foundation"
[ 18.353] compiled for 1.17.1, module version = 1.0.0
[ 18.353] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.353] (II) Loading sub module "ramdac"
[ 18.353] (II) LoadModule: "ramdac"
[ 18.353] (II) Module "ramdac" already built-in
[ 18.354] (II) modeset(G0): using drv /dev/dri/card1
[ 18.354] (WW) Falling back to old probe method for modesetting
[ 18.354] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.354] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 18.354] (==) NVIDIA(0): RGB weight 888
[ 18.354] (==) NVIDIA(0): Default visual is TrueColor
[ 18.354] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 18.354] (**) NVIDIA(0): Enabling 2D acceleration
[ 18.948] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 18.948] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 750 Ti (GM107-A) at PCI:1:0:0 (GPU-0)
[ 18.948] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 18.948] (--) NVIDIA(0): VideoBIOS: 82.07.32.00.18
[ 18.948] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 18.952] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 750 Ti at PCI:1:0:0
[ 18.952] (--) NVIDIA(0): CRT-0
[ 18.952] (--) NVIDIA(0): DELL U2211H (DFP-0) (boot, connected)
[ 18.952] (--) NVIDIA(0): DFP-1
[ 18.952] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 18.952] (--) NVIDIA(0): DELL U2211H (DFP-0): Internal TMDS
[ 18.952] (--) NVIDIA(GPU-0): DELL U2211H (DFP-0): 330.0 MHz maximum pixel clock
[ 18.952] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 18.952] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 18.952] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18.952] (**) NVIDIA(0): device DELL U2211H (DFP-0) (Using EDID frequencies has
[ 18.952] (**) NVIDIA(0): been enabled on all display devices.)
[ 18.953] (==) NVIDIA(0):
[ 18.953] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 18.953] (==) NVIDIA(0): will be used as the requested mode.
[ 18.953] (==) NVIDIA(0):
[ 18.953] (II) NVIDIA(0): Validated MetaModes:
[ 18.953] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 18.953] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 18.983] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[ 18.983] (--) NVIDIA(0): option
[ 18.983] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 18.983] (==) modeset(G0): RGB weight 888
[ 18.983] (==) modeset(G0): Default visual is TrueColor
[ 18.983] (II) Loading sub module "glamoregl"
[ 18.983] (II) LoadModule: "glamoregl"
[ 18.983] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 18.995] (II) Module glamoregl: vendor="X.Org Foundation"
[ 18.995] compiled for 1.17.1, module version = 1.0.0
[ 18.995] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.995] (II) glamor: OpenGL accelerated X.org driver based.
[ 19.024] (EE)
[ 19.024] (EE) Backtrace:
[ 19.025] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x5949c9]
[ 19.026] (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7fc93cef353f]
[ 19.028] (EE) 2: /usr/lib/libX11.so.6 (_XSend+0x2b) [0x7fc932e6a0bb]
[ 19.028] (EE) 3: /usr/lib/libX11.so.6 (_XFlush+0x15) [0x7fc932e6a575]
[ 19.028] (EE) 4: /usr/lib/libX11.so.6 (_XGetRequest+0x65) [0x7fc932e6d055]
[ 19.028] (EE) 5: /usr/lib/libX11.so.6 (XQueryExtension+0x4d) [0x7fc932e605ed]
[ 19.028] (EE) 6: /usr/lib/libX11.so.6 (XInitExtension+0x32) [0x7fc932e54392]
[ 19.028] (EE) 7: /usr/lib/libXext.so.6 (XextAddDisplay+0x4f) [0x7fc932c2338f]
[ 19.028] (EE) 8: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x5f3f7) [0x7fc93322c3d7]
[ 19.028] (EE) 9: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x804) [0x7fc93316ebf4]
[ 19.028] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 19.028] (EE) 10: /usr/lib/libEGL.so.1 (?+0x804) [0x7fc933417ef4]
[ 19.028] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 19.028] (EE) 11: /usr/lib/libEGL.so.1 (?+0x804) [0x7fc933418924]
[ 19.028] (EE) 12: /usr/lib/libEGL.so.1 (NvEglRegClientApi+0x4f36) [0x7fc933425866]
[ 19.028] (EE) 13: /usr/lib/xorg/modules/libglamoregl.so (glamor_egl_init+0x99) [0x7fc935930539]
[ 19.029] (EE) 14: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x29ce) [0x7fc935fc7e9e]
[ 19.029] (EE) 15: /usr/lib/xorg-server/Xorg (InitOutput+0xbcc) [0x47b63c]
[ 19.029] (EE) 16: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43c9da]
[ 19.029] (EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7fc93cee0800]
[ 19.029] (EE) 18: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
[ 19.029] (EE) 19: ? (?+0x29) [0x29]
[ 19.029] (EE)
[ 19.029] (EE) Segmentation fault at address 0x0
[ 19.029] (EE)
Fatal server error:
[ 19.029] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 19.029] (EE)
[ 19.029] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 19.029] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 19.029] (EE)
[ 19.031] (EE) Server terminated with error (1). Closing log file.
Output of command "lspci -k | grep -A 2 -i "VGA""
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Device d000
Kernel driver in use: i915
01:00.0 VGA compatible controller: NVIDIA Corporation GM107 [GeForce GTX 750 Ti] (rev a2)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 3102
Kernel driver in use: nvidia
Output of command "modinfo nvidia"
filename: /lib/modules/3.18.6-1-ARCH/extramodules/nvidia.ko.gz
alias: char-major-195-*
version: 346.47
supported: external
license: NVIDIA
alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
alias: pci:v000010DEd*sv*sd*bc03sc02i00*
alias: pci:v000010DEd*sv*sd*bc03sc00i00*
depends: drm,i2c-core
vermagic: 3.18.6-1-ARCH SMP preempt mod_unload modversions
parm: NVreg_Mobile:int
parm: NVreg_ResmanDebugLevel:int
parm: NVreg_RmLogonRC:int
parm: NVreg_ModifyDeviceFiles:int
parm: NVreg_DeviceFileUID:int
parm: NVreg_DeviceFileGID:int
parm: NVreg_DeviceFileMode:int
parm: NVreg_RemapLimit:int
parm: NVreg_UpdateMemoryTypes:int
parm: NVreg_InitializeSystemMemoryAllocations:int
parm: NVreg_UsePageAttributeTable:int
parm: NVreg_MapRegistersEarly:int
parm: NVreg_RegisterForACPIEvents:int
parm: NVreg_CheckPCIConfigSpace:int
parm: NVreg_EnablePCIeGen3:int
parm: NVreg_EnableMSI:int
parm: NVreg_MemoryPoolSize:int
parm: NVreg_RegistryDwords:charp
parm: NVreg_RmMsg:charp
parm: NVreg_AssignGpus:charp
In addition, in order to disable sddm I downloaded latest Arch linux installation CD (2015.02.01) but I was unable to start PC with this version. Loading stuck after first 3 lines, after "triggering udevevents".
I had old version 2014.08 and it worked ok.
Thanks,
Alexey

I just wanted to echo eugeneyche's comment. I ran the same steps mentioned by ElectricPrism but that didn't really fix them. I had to add nomodeset to my kernel parameters. I now want to know what's really going on. For the record, this was my backtrace:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): device Ancor Communications Inc ASUS VE278 (DFP-1) (Using
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): EDID frequencies has been enabled on all display
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): devices.)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0):
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0): will be used as the requested mode.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0):
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) NVIDIA(0): Validated MetaModes:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) NVIDIA(0): Virtual screen size determined to be 3600 x 1080
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (--) NVIDIA(0): option
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) modeset(G0): RGB weight 888
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) modeset(G0): Default visual is TrueColor
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) Loading sub module "glamoregl"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) LoadModule: "glamoregl"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) Loading /usr/lib/xorg/modules/libglamoregl.so
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) Module glamoregl: vendor="X.Org Foundation"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: compiled for 1.17.1, module version = 1.0.0
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: ABI class: X.Org ANSI C Emulation, version 0.4
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) glamor: OpenGL accelerated X.org driver based.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Backtrace:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x5949c9]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7fad6053a53f]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 2: /usr/lib/libxcb.so.1 (xcb_writev+0x0) [0x7fad56046100]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 3: /usr/lib/libX11.so.6 (_XSend+0x19e) [0x7fad564b122e]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 4: /usr/lib/libX11.so.6 (_XFlush+0x15) [0x7fad564b1575]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 5: /usr/lib/libX11.so.6 (_XGetRequest+0x65) [0x7fad564b4055]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 6: /usr/lib/libX11.so.6 (XQueryExtension+0x4d) [0x7fad564a75ed]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 7: /usr/lib/libX11.so.6 (XInitExtension+0x32) [0x7fad5649b392]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 8: /usr/lib/libXext.so.6 (XextAddDisplay+0x4f) [0x7fad5626a38f]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 9: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x5f3f7) [0x7fad568733d7]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 10: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x804) [0x7fad567b5bf4]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) unw_get_proc_name failed: no unwind info found [-10]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 11: /usr/lib/libEGL.so.1 (?+0x804) [0x7fad56a5eef4]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) unw_get_proc_name failed: no unwind info found [-10]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 12: /usr/lib/libEGL.so.1 (?+0x804) [0x7fad56a5f924]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 13: /usr/lib/libEGL.so.1 (NvEglRegClientApi+0x4f36) [0x7fad56a6c866]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 14: /usr/lib/xorg/modules/libglamoregl.so (glamor_egl_init+0x99) [0x7fad58f77539]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 15: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x29ce) [0x7fad5960ee9e]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 16: /usr/lib/xorg-server/Xorg (InitOutput+0xbcc) [0x47b63c]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 17: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43c9da]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7fad60527800]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 19: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 20: ? (?+0x29) [0x29]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Segmentation fault at address 0x0
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: Fatal server error:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Caught signal 11 (Segmentation fault). Server aborting
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: Please consult the The X.Org Foundation support
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: at http://wiki.x.org
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: for help.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Please also check the log file at "/dev/null" for additional information.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Server terminated with error (1). Closing log file.
Mar 09 19:57:56 dexter systemd-coredump[449]: Process 448 (Xorg) of user 0 dumped core

PC Suite not starting automatically after re-boot.

Running the latest version of PC Suite in 32bit Vista. Every time I re-boot my PC, PC Suite refuses to start automatically, and there is no icon in the tray. I have to go into start, programs, etc..,then 'click to connect a phone' every time. Very annoying!
Very strange behaviour, given the fact that my laptop (running XP Pro), starts up with PC suite in the tray and connects with my phone via bluetooth without any intervention whatsoever.
Anyone experienced or solved this problem?
Jimmy.

In the start up tab of system config, there is no 'launch application' listed. However, PC suite is listed and enabled.
An update on this problem: Having looked at various previous posts, it would appear that ATI Catalyst Control Centre conflicts with the start-up of PC Suite. I have uninstalled this app, and all would now seem to be well. I beleive ATI CCC causes quite a few problems with Nokia software judging by problems other posters are having..
Jimmy.

CUE 8.0(1) unable to start automatically after reboot CME

Similar Messages

Maybe you are looking for