CUE/CME - transfer of VM locks up phone until the call is manually cleared
Have a 2821 with IOS 12.3(14)T2 and NM-CUE 2.1(1)
When a user accidentally transfers their VM wrong their phone gets a state where it can't place/receive calls (no dialtone, etc) until the call is cleared on router manually by an admin.
What the user is doing sometimes (by accident) is they check their VM and instead of choosing option 5 to fwd the VM, they are hitting transfer on their phone the extension they have to do a direct transfer to VM. When they do this is when the phone gets in this state.
It is stuck in the below state.
CME# show voice call summ | inc 50/0/5
50/0/50 .1 None - S_CONNECT EFXS_WAIT_RELEASE_REQ
50/0/51 .1 - - - EFXS_ONHOOK
Until the call is cleared manually (clear call voice causecode 1 id 1E5B)
1E5B : 188609 -1567535748ms.1 +2010 pid:20050 Answer 7915 active
dur 00:05:29 tx:0/0 rx:2131/340960
Tele 50/0/50 (188609) [50/0/50.0] tx:0/0/0ms g711ulaw noise:0 acom:0
i/0:0/0 dBm
This problem is possibly due to the bug CSCdw38541.
Similar Messages
-
My phone was stolen and I discontinued cell service to the phone through my provider. However, before discontinuing service, I locked my phone from the icloud. Now that it is no longer being serviced by the service provider, will the phone remain locked?
Thanks, James. Sadly, I had not upgraded to iOS 7 as I only had an iphone 4 and those I knew with the 4 who upgraded had major issues with battery life, so I decided not to upgrade. However, I know the phone was locked because the new "owner" called and hung up on me while calling the number I listed in the "This phone is stolen message" set by the cloud. Are you saying that my phone will remain locked if they don't know how to break into it? Or are you saying that it will no longer stay locked once I turned off service to the phone?
-
Why does Apple lock my phone to the first SIM I activate with? How to clear the IMEI?
I paid a premium to purchase a unlocked iPhone direct from Apple Canada so that I could use this phone around the world with various SIM cards. As it turns out however, Apple locks this phone upon the initial activation with the SIM I had installed for the activation. The result is that I can receive calls, send/receive SMS but cannot send calls.
Apple tells me that its Rogers I need to talk to. Rogers wants $60 to unlock my phone and tell Apple's IMEI database that this phone is legit. So why can't Apple register my IMEI directly in their own database? I bought the phone from them, unlocked.
This is unacceptable frankly!
Apple advised to do a restore from iTunes with the new SIM and it should unlock. I attempted this after a backup, restoring from the backup, but am still unable to make calls.
Can anyone please advise how I can register my IMEI directly with Apple or how I can get this working again? I'm 5 months with a $800 piece of hardware that can't make phone calls.
@Apple...can you please provide me with an official story of how this works, why its done this way and how it is to be solved?
Appreciate the time of anyone who can help on this matter.iPhones which are sold subsidized or bought directly from a carrier are all carrier locked iPhones.
The only way to buy an unlocked iPhone is direct from Apple at full price. This is just the way it is.
As far as unlocking the iPhone goes it is up to the carrier. Rogers started to unlock iPhones back in December for $50 + applicable provincial taxes, which puts it somewhere close to $60. This is a service that Rogers offers and has nothing to do with Apple. Yes the IMEI number is added to town Apple server somewhere but the service is to do with Rogers. If you are having issues with the unlocking process then you need to contact Rogers.
Once the IMEI number has been sent in you should be able to connect your iPhone to iTunes and do one of two things. You can restore the iPhone with the original SIM. You should get a message saying the iPhone is unlocked with the restore is completed. Second option is to install a sim card from a differnt carrier and then connect to iTunes. No restore should be required if you have a sim card from a differnt carrier.
If you are not getting service with the new carrier and the sim card I would say double check that the sim card is working properly and is activated with the new carrier. You should be able to call them to see. -
Hi. l recently purchased 2 ringtones from itunes store. When l asked the system provider to transfer my data from old phone to the new iphone 5, it gets override. When i try to downloa the same ringtone again, l was asked to purchase it again. Please help tks
You only get one download.
Did you fail to save your ringtones to your computer? -
I lock my phone on the imminent Mwinyi Is it possible to Open to be held on all the networks in return for material I hope to respond Thanks
Your English in unintelligible.
Can you post in your native language? -
I tried restoring my iPod, but it told me it was unsuccessful. Now it's stuck at the connect to iTunes screen. I've tried holding the home and lock buttons, just until the unit turns off, and until the unit restarts. What do i do? iTunes wont even recognize that an iPod is connected.
Try to connect in reocvery mose, explained in this article:
iOS: Unable to update or restore -
Recently some of my contacts are no longer displaying in my contact list, but I know they're in memory because when one of them calls me my phone recognizes the caller. This happened a few days ago, so i must have changed some setting,but I have no idea which one. Can anyone help?
Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread. -
Lock front panel until the event case for this event completes
A Dynamic Event is a filtered event? Is this why "Lock front panel until the event case for this event completes" is not shown on Edit Event window dialog? I use Dynamic Event so I can subvi the event structure.
I need stop my app from locking the FP whenever the user double clicks on the numerical array value (<-- the FP freezes the mouse and renders it useless) and stops the value from ever being changed. This event is registered for Value Change (not mouse up or down) and I get a locked mouse. As yet in the UI, no value changed occurs but I get a locked mouse. A LV bug?
Trying to KISS, I can see this fixing this by moving ONLY the value change event to the top level VI instead of a dynamic registered event in a subVI. This will give me the option to NOT "Lock front panel until the event case for this event completes" .
Solved!
Go to Solution.richjoh wrote:
Thx, Ben that fixed the problem when I unchecked "Lock panel...".
So it appears LV locks the panel during runtime once the Dynamic Reg Events is on BD and it doesn't matter if your case to handle the Reg Events is created or NOT... interesting. That's why my mouse persisted to "freeze up" although I deleted the case for my FP array.
Its situation like what you described that has given me many insights into how LV actually works. In one of my bbuggy VI's I found that a class wire can run a million miles through multiple sub-VI queues etc but the data itself is only touched when it has to be touched. in my case it was a crash while trying to write bogus class dat to a TDMS file.
I am glad you are back on course.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
When phone is locked can I see the caller ID before I choose to answer?
It appears that when the phone is locked and you receive a call the only option is to slide to answer or ignore it using the power key. However, before deciding what to do, can I see the caller ID? when the phone is not locked the caller ID comes through but when its locked it does not.
Thank you for your helpIf your phone is "locked", AKA sleeping, and you receive a call, you should be able to see the Caller ID before answering.
There should never be a time where the Caller ID is not shown, unless it is a blocked ID. -
after updating the OS on my iphone 4S i activated the lock my phone and now I can not unlock it it put the password in but it does not work how can I unlock it?
Hello son29660,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Best of luck,
Mario -
Cisco Unity 7: Voice mail cann't get the name or Number phone of the caller
Hi,
I have installed Cisco Unity Messaging Unified version 7 and integrated with Exchange 2010.
I have two scenario, and I want to know if are normal or not:
1. If the 2 IP phones are subscribed with Cisco Unity: the first IP phone call the other IP phone and let a voice mail. When the second IP phone check his message vocal it can get the name of the caller or his number phone (the message is: You have One message from XXXX) and he get e-mail as objet: Voice Mail from XXXX.
2. If one IP phone is not subscriber with cisco unity call other Ip phone subscribed with cisco unity and let him a voice mail. The second IP phone when check his message vocal it can’t get the name of the caller or his number phone: The message is: You have one voice mail xxxx; without indicate from!! and he get a e-mail as object: Voice mail from Unknown.
Please, I want to know if the second scenario is normal ? if not, who to resolve this problem? I want that he indicate the number of caller same he isn't subscriber with cisco unity?
Thanks a lot,
Best regards,
Omar YUNSISo for the 2nd scenerio you would want to check what your Message Subjects were set to. For Unity 7 open Web SA, click Configuration and then Message Subjects. Make sure that the Outside Caller Message has %CALLERID% in it somewhere. The value %CALLERNAME% will return unknown if we do not receive a name from the PSTN.
Try setting the Outside Caller Message to:
%U% %P% Voice Message from %CALLERID%
and that should get you your desired results.
The default Message subject is:
%U% %P% Voice Message from %CALLERNAME% (%CALLERID%). So with that it would say Voice Message fom Unknown (xxxx) if it was not able to determine the name of the user which is usually normal from a PSTN call.
Just to note, the From address is always going to say from Unity Messaging System, it will only be the subject that has the extension in it.
Bryan -
Problem transferring calls between Voip phones when the call is originated
Hi,
I have configured a gateway h323 (3640- 12.3) to communicate with Cisco Callmanager 3.3(4).
On the H323 gateway I have installed one BRI interface and one FXS interface.
Inside my network I am using VoIP telephones 7910.
Originating calls in the Voip telephones which destination is the PSTN is working fine;
Receiving calls from PSTN that destination is VoIP telephones is OK also;
Redirecting or doing Hold on calls between VoiP telephones works but ..
When redirecting or doing Hold on calls between a VoiP telephone and a call from PSTN I loose the voice stream.
Apparently, all signalling is working fine because when redirecting the call originated in the PSTN from one VoIP telephone to another VoIP telephone, I can see the Calling number ID. Even if I use the telephone keyboard, I can listen the tones, but I have no voice stream.
Please any help will be welcome.
Thanks,
David CostaI have tried different configurations and now it is working. The problem is that I couldnt identify were the miss configuration was.
Another question is: Can I use a codec with compression between voip interface of h323 gateway and the Callmanager or Voip phones to pass music on hold?
Now I only pass music on hold if I configure G.711 on the voip interface of h323 gateway.
Thanks,
David Costa -
Hi Expert,
In my project I have guest room in hotel, and I have in this room Three Cisco IP phones and I need when some one call from outside, I will be able to hear the calling in three phones, if the guest want to switch from one phone to another to continue the calling.
How can I do this option with CUCM 8.6
thanks
MohammadThanks Jaime, it works fine!
Could you help me with this issue if you can, please:
https://supportforums.cisco.com/discussion/12419296/i-cant-change-maximum-number-calls-and-busy-8941
Many thanks
Mohammad Saeed -
The phone for some reason keeps deleting the call log and messages every few days!! What can I do about this
There is a lot of things one can do to free up memory beyond what jojo said.
1. Do a battery pull.
2. While at the home screen hold the ALT key and type LGLG this pulls up the event log this can get quiet large. pull up the menu and clear it.
3. That cool demo video is a real memory hog DUMP IT!!!
4. The preinstalled wall paper is also memory intensive move it to the SD card or just dump it.
5. Being multilingual in today’s world is almost a necessity but your Berry doesn’t need to be pick a language and dump the rest.
This is just the tip of the ice berg just keep in mind that if you dont use it dump it, if you need something later you can always reinstall it.
There is only two reasons to ever get into this field either as a hobby or a career, frustration and fascination. Unfortunately no matter which one has led you here today, I guarantee it will eventully lead to the other.
Quando Omni Flunkus Moritati
If the women don't find you handsome, and I'm quessing they don't, they should at least find you handy. -
When I enter an event in my calendar (comcast, yahoo) it used to sync automatically to my Apple calender. When I updated to IOS7 this function stopped working.
Hi cjhedrick,
If you are having unusual issues syncing data to Outlook when you haven't in the past, you may find the following article helpful:
Apple Support: Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
http://support.apple.com/kb/ts2776
Regards,
- Brenden
Maybe you are looking for
-
How to compare table in different versions?
Hi, Please let me know how to comare table fields in different versions? Ex: I need to compare the table fields of version 4.5 with ECC6.0. Thank you.
-
Officejet Pro 8600 Plus output tray miss-insta​lled
The output tray on my new Officejet Pro 8600 Plus is partially miss-installed. There is a clip on each side of the underside of the output tray which is supposed to engage tips on each side of the frame for the paper tray. Apparently, when the outp
-
To refer logical source in update rules
Hi, I wanted to find the logical source system using abap into my update rule, is it possible. Help would be appreciated. Thanks, SD
-
I changed my nick name in Game Centre and I didn't realise this would cause me to loose all my data . how do I recover it any ideas please?
-
HELP!! wat is wrong with it?
Hi I've been workin on a project, and it seems something is wrong with this code... i honestly cannot figure it out... here it is : Uses the following methods: public static boolean areEquivalent (String word1, String word2) This method reutrns true