CUE: disable prompt "Record your message after the tone."

I would like to disable the prompt: "Record your message after the tone. When you are finished, hang up or press # for more options."
I found the „no voicemail conversation caller recording-prompt“ command, but it doesen’t seem to work.
Is this command supported on an UC540?
Regards
Stefan...

From exec mode, use the command
Router# Service-module i0/0 session
You will be connected to the Cue console
Enter your username and password (same as the credentials you used to access the CLI)
Once logged in, press enter to display the cue console (it's waiting for input, so pressing enter re-displays the command line)
Enter configuration mode (conf t), type the command, issue a copy run start to save, then type exit to return to the IOS CLI

Similar Messages

TS3406 I have an iPhone 5 c, iOS7 op. system. I have left a vouice message, but after the part of my vm mail ending "please leave your message after the tone", I do not hear a tone. How do I set a tone so that s.o can then leave a message after this? T

I have an iPhone 5C, w/iOS7 op. system. I have left a voice message, ending with "please leave your message after the tone". However, I do not hear a tone; how do I set up my phone answering system so that a tone is heard after my message? Thanks!
Don in KS

[url="http://web6.streamhoster.com/em2253/ZEN/ZenDeviceManager.wmv]See Movie[/url]?Hi, take a look at the movie... hopefully I answer to your question is there. [b]Let me know if you can NOT see it... [/b]and I will send you a picture. [color="#ff0000"]and if you can see the movie, give me feedback on it. Did it look ok in your computer? (it changes with all computers depending on your setting and player!). [color="#ff0000"]Was the sound ok?I almost wish I had not titled this post as "Happy Conclusion." It was happy but only a day or two... then I started having other problems... unbelievable. So, If I gave the wrong impression, sorry!

Prompt "Thank you" message after submit

Hi folks,
I would like to prompt the user with the "Thank you for submitting your information to us" message after the form has been submitted appropriately to the server.
1. I don't have PostSubmit event, how can I do it without
2. I also want to make sure that the form processing in the server-side was OK, how can I send back to the form some flag that say it that the server did it's job good or not.
Actually I want to do it as a transaction.
Any idea?
Thank you,
Yair Nevet

You can return a reply from the server after it recieves the submission (no different than a web page). Typically you will send it back as soon as the data is recieved on the server, that way the user can move on if there are any problems with processing. You can wait until after the transaction runs but if there are any issues with the transaction (think hanging or system not responding) then the user gets no feedback at all. Most people will send back a message indicating that the server recieved the transmission and will use a different means of communication for exception handling (think email).
Just my 2 cents worth.
Paul

In Office 2011 the function "share it by e-mail" seems to be disabled. that happened recently, just after the apple update regarding Java. Any idea on how enable this function again?

in Office 2011 the function "share it by e-mail" seems to be disabled. that happened recently, just after the apple update regarding Java. Any idea on how enable this function again?

I was able to get to a support person who helped me fix this without charge. I guess it was my bad for not trying the right way to access support.
Anyway, they answer is this.
I had to create a new account on my computer. When I logged into the new account it immediately wanted an AppleID. I used my daughter's e-mail address for the AppleID. This setup the internet accounts correctly with her iCloud.com e-mail address. I was then able to access e-mail in both the browser and Mail. Not that complicated but nothing that I would have easily thought up on my own.
Thank Apple Support!

ITunes says a newer version of software (4.3.3) is available. However, when I download it it gives me an error message after the download is complete. Any solutions?

When I sync my iPhone 4 with iTunes it says that a newer version of software (4.3.3) is available. However, after it appears to download the software I get an error message that the server timed out. What's happening?

This is asked and answered here many times each day. You can do a forum search ( right side of this page).
Disable your firewall/security software and try again.

OBIEE(11.1.1.6.8) dashboard prompts "Please Wait" Problem after the automatic upgrade of browser

Hi all,
We have a problem in OBIEE(11.1.1.6.8) dashboard prompts after the upgrade of Chrome browser.. The values of dashboard prompts are not shown to user ( with message "Please wait" ) We had this problem in Internet Explorer 10. So we had announced the users to have minimum browser versions Chrome 12+ , Firefox 17+ , Internet Explorer 9.x as its is declared in certification matrix. Now after upgrade (automatically)in Chrome version 30.0.1599.101 m , we have the same problem and the only working browser remaining is Mozilla Firefox. What should we do to prevent this without upgrade or patch ? Is there any workaround ?
Thanks ...

OBIEE problems with Chrome (update 30) plus patch

Your message exceeds the maximum allowed by the server

After many years my Mail refuses to work properly:
This message could not be delivered and will remain in your Outbox until it can be delivered.
Your message has size 1,6 MB, which exceeds 1,0 MB, the maximum allowed by the server.
I created another account but problem remains.
I talked with my internet provider and the problem is only with Mail.
Thanks.

Is this for a .Mac account?
If so, check this link which the following was copied from.
http://docs.info.apple.com/article.html?artnum=25301
There is also a 10 MB maximum size for messages sent or received using the .Mac mail system.
There is nothing wrong with Mail and you would experience the same with any email client such as Mail on a Mac or a Windows PC.
Most ISPs and email account providers have the identical 10 MB overall message size limit for received and sent messages. In fact, I know several people who have a smaller overall message size limit such as 5 MB so this is not unusual.
Even if your ISP or email account provider for your email account has a larger overall message size limit, the overall message size limit must be under the recipient's overall message size limit imposed by their ISP or email account provider for their email account or your sent message will be rejected by the recipient's incoming mail server.
All message attachments must be encoded before being sent and decoded when received. Mail uses MIME 1.0 for attachment encoding/decoding which is the internet standard but a problem with MIME is it isn't very efficient.
The attachment encoding process increase the size of the pre-encoded file by roughly 50% or so. A 5 MB file (pre-encoded) will be roughly 7.5 MB in size after the attachment encoding process.

HT6058 I can no longer use facetime or messages after the iOS 7.0.4 update.

After the most recent update, I can no longer connect to Facetime and I no longer recieve messages. I can send texts, but I don't think I can receive them. Any ideas on when a fix can be expected?

Change your iPod DNS to 8.8.8.8
That should work. Cheers

Who kills your iPod after the installation of iPod updater?

Hello all,
First, sorry for my poor English. I am not a professional nor a technician and I could be wrong, so please correct me. There are many problems reported mainly from the PC users that their iPod can't be recognized nor mounted after the installation of the latest iPod updater. Most of them claimed that the iPod updater kills their beloved iPods. Before we jump to a conclusion, we must understand what is iPod, and how does the iPod update work.
I believe that iPod equals a basic computer and need a OS in order to communicate with the PC. Installation the Updater will format the Hard disk of the iPod and then install the simple OS, so if we open the iPod updater file, it will show a window with two buttons i.e. Restore and Update, an Update is to copy the latest OS over the old version, but the Restore will format the hard disk before it install the OS over it. And importantly, during this process, the iPod needs sufficient of power to complete the upgrade, however, the problem comes just after the format, and the PC's USB (only 2 will work not 1.1) does not supply the stable power,even some cases that iPod does not get charge in the half way of installatin (a proper installation, you will see a running bar showing on the iPod screen just after the format), so you can imagine a hard disk got format but only got an uncompleted OS, of course, the iPod would not get recognized and mounted, and do not manage to communicate with the computer. At this stage the iPod will show a Sad iPod icon, a folder with exclamaiton points or a battery charging icon.
So, what would you do when it reach at this stage, a Reset would not work, and you would not able to do the Restore as the iPod is totally unrecognized by the computer.
Therefore, is there anyway to solve this problem, in my opinion and from my past experience, the answer is "yes", the simple way is to put your iPod in Disk Mode, when it plug to the computer, it will show as an external Hard Disk, you must fix it by doing a format (RESTORE would not work at this stage as it still can't recognized and mounted), in Mac we can use "Disk Utility" but the XP would not allow you to do the format in FAT32. After the formatting, replug the iPod with the computer, then it can be mounted and allow you to do the RESTORE.
In addition, I find an interesting point is, if your iPod formatted with a Mac, you will have better chance to be mounted with a PC, even your iPod does not complete the process of the installation of the iPod updater, and a PC formatted iPod will be likely to be fixed by a Mac as well.
How should we do before the update of the lastest software, for the XP user please do the following:-
1. Go to the system restore and create a check point in order to revert back to the previous version of the iPod updater, or do the back up using the 3rd party software such as Ghost or Go Back.
2. To have a test and make sure the PC's USB works properly. You can use the iPod or a PDA, and just make sure it got charged.
3. Have your iPod a full charge before the installation of the iPod updater
So, who is the main killer for the iPod?
For further infomation please read the following link - which wrote by a groups of great people - thank you guys
http://discussions.info.apple.com/webx?128@@.68ae8668

Hello Shanker Ghimire,
Please try run the following command:" devenv /resetuserdata " to have a test, it will clear all your settings.
By the way, have you ever got any error when install that Visual Studio SDK?
In case there are some unknown errors, I'd like to ask you for some logs. Please use
http://aka.ms/vscollect
to gather the installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://skydrive.live.com/
and share the link here.
Best regards
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am having issues with being able to send videos through text message after the update

I have the motorola droid 4 and after the recent update, I am no longer able to change my video settings on my phone. I need to be able to change the quality to low to be able to send as mms, however the option is no longer there? I have went through settings and nothing gives me the option to record a video and send it through text. error says that the video can not be attached because it is too large. can someone please assist me. The update was 4.1.2 version.

I have the Droid 4, and the 4.1.2 OS; when I open the camera and switch to video, then tap the gear for settings, I can choose HD+ (1080), all the way down to 320x240 resolution (5 different choices for resolution)
I can then go to that video in my gallery, and I have the share option there... how long is the video you are trying to send? What is the total size of the file? Perhaps the receiving party's phone cannot receive the video file?

Logic recording your jam in the background how to turn it into a track

Im new to the logic 8, I had logic 5 and then dabbled with garageband.
So I' have some things to learn and reteach myself,
question is:::::::::
I know you can have your tracks recording enabled and just jam out and it will record and be held in your memory
without hitting the record button and feeling the pressure,
What is the command or how do I make that *jam or music I played* into a recording on that track, (without having to push the record button)
Thanks

The bad news is that the feature you are talking about is called "magic", so it is not possible with audio.
The good news is that logic is filled with magic and can perform some pretty neat tricks, so with Midi, it actually is possible.
The feature is called "capture recording" (default key combination ctrl-apple-alt-R). This only works if the session was playing when you were jamming of course.
Cheers.

Editing messages after the hour is up.

I have noticed that sometimes way after the hour time frame has gone I can edit or remove messages sometimes this doesn't happen all the time but it seems to happen if the person doesn't seem to have read it yet.
I sent a message earlier today but can still edit it or remove it even though several hours have passed but with earlier messages in the day I can't though I do not think the person has read the message that I can edit.
Just wondering if anyone knows why this could be happening , I have only ever seen old messages on this topic and they all say you can't edit after an hour so I am confused.
I have the new version of skype that can send offline messaging

I bet that didn't continue.
What I'm seeing today is the opposite: instead of the usual hour, it changes to other lesser times. An hour ago, it was 15 minutes. Then it became 30 minutes. Now it's up to 45.
What gives? I hope it's not in the process of being lowered to 15 minutes for all. A friend still has 60 right now. Same Skype version.

I can't message after the new down load

I can't message after new download. Error message says not connected to network. Network is working fine

Hello A20,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Best of luck,
Mario

Anyway to Exchange Your Phone after the 14 Day Grace Period but under 30 Days.

I bought my phone on the 2nd of this month so it has been 20 days under 30. I wasnt sure if the HTC One was ever going to come out as it has been pushed back since July. I would like to exchange my phone, has anyone been able to do this in the past? If so, how?

You can only exchange the phone during the 14 day worry free guarantee period. The only devices I know of that have an exception are iphones purchased directly through apple then they get a 30 day period.
You could add another line to your account for the HTC One when it's released or pay full retail for it.

Hello. My iPhone 4s when recieving message plays the tone more than once. How to stop that?

It plays the tone more than once and it's not playing the tone fully. It plays like it is "stuck". Like CDs play when they are scratched. How can I stop that?

Pause and off are the same thing. This is how you stop the music.
iPhone User Guide (For iOS 5.0 Software)

CUE: disable prompt "Record your message after the tone."

Similar Messages

Maybe you are looking for