Cue Points not highlighted - gggrrr

Hey,
I'm using Flash Pro v8 Trial, and I'm importing a movie, but
when I go to Advanced Settings, my Cue Points menu isn't
highlighted. What am I doing wrong?
Please help. This is really killing me.
Kai

senin wrote:
> Hey,
>
> I'm using Flash Pro v8 Trial, and I'm importing a movie,
but when I go to
> Advanced Settings, my Cue Points menu isn't highlighted.
What am I doing wrong?
>
> Please help. This is really killing me.
Cue Points are only available if the video comes from outside
source not if you
import it to timeline.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

Embedded FLV Cue Points not working

I am updating a project which uses an FLVPlayback component to play and navigate FLV videos using embedded Navigation cue points. The FLVs were originally encoded using an older version of AME, CS4 possibly. When trying to replace an FLV with a new one encoded using AME CS6, the embedded cue points do not work. Testing in Flash I get "VideoError: 1003: Invalid seek" when attempting to use "seekToNavCuePoint".
Comparing the two FLVs using Premiere shows no recognizable differences between them. They are the same format, their cue points are named identically, all are designated as Flash Cue Points, and all set to type "Navigation".
Digging into the FLV data, I've found that the cue point descriptions are formatted quite differently and I'm wondering if this is the source of the problem:
Excerpt from the original FLV (AME CS4?):
     <rdf:li>
      <rdf:Description
       xmpDM:trackName="AME Markers"
       xmpDM:frameRate="f254016000000">
      <xmpDM:markers>
       <rdf:Seq>
        <rdf:li
         xmpDM:startTime="9323149248000"
         xmpDM:name="q1in"
         xmpDM:type="FLVCuePoint"
         xmpDM:cuePointType="Navigation"/>
Excerpt from the new FLV (AME CS6):
     <rdf:li>
      <rdf:Description
       xmpDM:trackName="FLVCuePoint"
       xmpDM:trackType="FLVCuePoint"
       xmpDM:frameRate="f15">
      <xmpDM:markers>
       <rdf:Seq>
        <rdf:li>
         <rdf:Description
          xmpDM:startTime="550"
          xmpDM:name="q1in"
          xmpDM:cuePointType="Navigation">
         <xmpDM:cuePointParams>
          <rdf:Seq>
           <rdf:li
            xmpDM:key="marker_guid"
            xmpDM:value="2c2c8be0-75af-47d6-8938-4a365e33a550"/>
          </rdf:Seq>
         </xmpDM:cuePointParams>
         </rdf:Description>
        </rdf:li>
Completely stumped here, any ideas appreciated!

More digging into the new FLV shows that while XMP defines the cue points as type "navigation", there is prior data in the file that defines all the cue points as "event". This makes sense, because my SWF is correctly listening for and reacting to an "end" cue point in the FLV, but will not seek to any cue point since they are all set as "event".
Copying and pasting from Notepad++:
cuePoints       0       name   q1in time @BYûçl‹D type   event
1       name   q1out time @JÜ(õÂ\ type   event
2       name   q2in time @V£¥ãS÷Ï type   event
3       name   q2out time @^/ Ÿ¾w type   event
4       name   q3in time @_Oß;d type   event
5       name   q3out time @nE™™™™š type   event
6       name   q4in time @s G® zá type   event
7       name   q4out time @vNÄ›¥ãT type   event
8       name   q5in time @w¢Ù ‡+   type   event
9       name   q5out time @zw×
=p¤ type   event
10       name   end time @€ð bMÒò type   event
Any idea why AME is doing this?

Cue points not working

Hai am tying to inject the cuepoints in strobe mediaplayer version 2.0.Its not Working ,Same code is working in another version(1.6).Whats the problem kindly guide me

More digging into the new FLV shows that while XMP defines the cue points as type "navigation", there is prior data in the file that defines all the cue points as "event". This makes sense, because my SWF is correctly listening for and reacting to an "end" cue point in the FLV, but will not seek to any cue point since they are all set as "event".
Copying and pasting from Notepad++:
cuePoints       0       name   q1in time @BYûçl‹D type   event
1       name   q1out time @JÜ(õÂ\ type   event
2       name   q2in time @V£¥ãS÷Ï type   event
3       name   q2out time @^/ Ÿ¾w type   event
4       name   q3in time @_Oß;d type   event
5       name   q3out time @nE™™™™š type   event
6       name   q4in time @s G® zá type   event
7       name   q4out time @vNÄ›¥ãT type   event
8       name   q5in time @w¢Ù ‡+   type   event
9       name   q5out time @zw×
=p¤ type   event
10       name   end time @€ð bMÒò type   event
Any idea why AME is doing this?

Exporting subtitles for Flash cue points

I want to not just create subtitles, but use them in Flash video and other cue-point supported applications for distribution on the web. Is there a way to export my subtitles created in DVDSP to a standard stf or other document? Or do I have to use external software and then export for Flash, DVDSP, etc? If I have to use a third party, which one works best? I've seen many in the Apple Downloads section...
Thanks,
Chris.

Hi Sigmundo,
At work ( disturb media ) we've finished a karaoke flash project. I haven't used Soundbooth then, we had limited time, so I wrote a few handy commands for flash that took care of the job. Hopefully we will be able to document that, right an article and share the commands as a packed extension.
I've learned Soundbooth over the weekend and FLVCuePoints was one of the highlights. I've used FLV
and everything worked out fine. I didn't know the Media(Flash Video) Encoder allows you open an xml
file and insert cuepoints at that stage.
Anyway,
About F4V, Lee Brimelow has a more detailed post about the cue points bug here:
http://theflashblog.com/?p=748
HTH,
George

Importing WAV file with Flash Cue Points Premiere Pro CS6

I want to import a Japanese voice-over . WAV file which has Flash cue points marked in it so that I can clearly identify edit points on the video timeline when I import it into Premiere pro CS6.
Or is there another way of getting a voice-over artist to mark up audio so that I can clearly identify when certain words or phrases have been spoken? Trouble is, Japanese characters mean nothing to me! Usually this is not a problem with European languages like French and German, as I can easily mark up the script with a highlighter as I can follow the voice over on the supplied script, but Japanese characters mean nothing to me.
Please help.
Many thanks.

Premiere has a function now where you can import a clip and drag onto a timeline and it will prompt you with a message about changing the timeline settings to match your clip, (or if there is no timeline it will automatically create one that matches your clip.) This is in CC of course so you might consider upgrading. They have fixed a lot of compatibility issues from CS6 to now. If you don't want to get all of CC for 60/month then you can at least shell out 20/month on premiere. It's worth it. They've made it where you don't have to worry about 99% of all video formats. They just work.

Premiere CS3: How can you encode xml cue point data in the chapter section of a marker for FlashVid?

Hi there,
I'm a total newb to this forum, so hello adobe premiere community! I'm perplexed by Adobes documentation on Premiere (and I'm sure I'm not the first ) anyway on the live documents page below:
http://livedocs.adobe.com/en_US/PremierePro/3.0/help.html?content=WS9390BED7-9466-46ea-A0E A-3240F1AFC36C.html
it states that:
“The cue point data in the Chapter field of a sequence marker in Adobe Premiere Pro will be encoded as Flash XML. For the XML protocol required, see Flash Help.”
Which is great…except this information doesn’t exist seemingly in either the Premiere documentation or Flash either for that matter, but as I’m interested in working with the chapter/marker area in Premiere – should I really be told to go off and search the documentation for another application, probably not! What would have been useful would have been a code snippet saying you do it like this, but of course, that would make things too easy!
Basically, I understand that in After FX you can add Flash marker information specifically for interpretation when exporting to Flash Video (i.e. name, type and parameters etc) and it suggests that you can do the same above in Premiere CS3 using some kind of concatenated string in the chapter area…it just doesn’t tell you how anywhere seemingly – WHY ADOBE!
Currently when I export markers as cue points based on the advice in the page above, anything I put in the chapter section to force Premiere to create a cue point is converted to a string, which becomes the cue point ‘name’.
This cue point name is then automatically appended to the ‘time’ the marker was inserted at and is always encoded as type ‘navigation’, with no obvious means of adding ‘parameters’ into the equation.
So (finally) does anyone know if you can insert this information into the chapter area for correct interpretation by flash (i.e. thus allowing you to choose between either 'navigation' or 'event' types, and pass as many 'parameters' as you wish etc) or are you just limited to supplying a name, and it being automatically set to the navigation type with no parameters?
I’m sorry for this long essay but at least the issue is well defined for you to answer, honestly any help you can provide what so ever would really be most appreciated!
Best regards,
Kat
PS – I have utterly no knowledge of XML either just in case you were wondering – and my only interest in XML is getting this basic information encoded into the FLV file from Premiere Pro CS3! Please help, pretty please with daisy’s!!!

Hi dradeke,
Thanks for your reply, which is indeed useful as clearly Adobe have made this task easier and less obscure in CS4 by adding simple interface functionality, however I'm stuck with using CS3 for the moment. Its not majorly a problem as the video material in question can be exported uncompressed then setup with cue points using the Flash encoder as an alternative (i.e. or even After FX CS3 also) which both provide the same features as Premiere CS4 seemingly. It is just that it would be much easier to be able to drop in simple markers whilst working with Premiere CS3, as this is what we are going to be using primarily, I just wondered if anyone knew how to invoke this in CS3 - its possible you can't, the documentation is vague at best!
However I really appreciate your response and help, thanks

Tab in Top Level Navigation is not highlighted when clicked on

Hi guys,
We have 1 problem in EP 6.0:
I create 1 iview(testiview), and attached to the role(testrole), assigned to 1 user, then login with that user. In top level navigation, i am able to see the role(testrole) in top level navigation, but after i clicked, the tab for this role is not highlighted, but the content of iview is displayed,
Any one knows what happened?
Thanks!
Guo Feng

Hi Guo
You have created one role and added one iView under it.
now can u tell which one you made as entry point.
if Role is the entry point are you getting the iView link in the DTN ?
If you made iView as entry point and then you r getting the content in content area and the iView link in the top.
i think the second one happens...
Check the role and iView properties .
Make the Role as entry point..
Cheers
Chinmaya
Reward for helpful answers

Final Cut Pro to Flash -- Inserting and Using Cue Points

I want to export a flash video using File - Export - Using Quick Time Conversion and selecting Flash. Under options for Flash, I see something about "Cue Points".
My assumption is that these would be points that you can insert that are similar to chapter markers and that you could have the Flash player on a web page jump back and forth between them.
Does anyone know of any documentation on inserting these points in Final Cut export? I couldn't figure it out. It looks like you give them a name and a timecode. I could not enter the timecode.
How about over on the player side? I assume some sort ActionScript in Flash is required. Has anyone seen a simple example/tutorial of these capabilities?

Apart from disabling time machine, iCal and any other programs or applications from taking focus. Time machine and software updates can certainly be told not to try as far as I recall.

How do you add cue points to a MOV file that Director 12 can read?

I have just downloaded the Trial of Director 12 - and unless I can add cue points to video that it can interpret - I am not going to be able to achieve what I need to. I've spent the last day and a half looking over the scant documentation provided by Adobe, and anything else I could find online - but the only answers that came anywhere near were for old versions using discontinued xtras.
Please can anyone help? - I am using Windows 7 64 bit - CS6.
Thanks in advance. :-)

Probably too late for your project but...
You can do this by using 3 sprites in addition to the SWF. In this example, I've named them "videoPlay", "videoRewind, and "videoStop". The SWF in this case was named "video."
Apply this script to each of the 3 sprites.
property mySprite
on beginSprite me
mySprite = sprite(me.spriteNum)
end
on mouseUp me
case mySprite.name of
    "videoPlay":
      sprite("video").play()
    "videoStop":
      sprite("video").stop()
    "videoRewind":
      sprite("video").stop()
      sprite("video").rewind()
end case
end

I need help with my event-based cue points with audio

Im having trouble with my video game project for my action script 3 class at school. Here is what i did, i made a game called Tailgate toss up. I filmed my character and rendered it in Adobe Premiere. I than brought my .mov file into After Effects and I put event-based cue points-
my first cue point at 0:00:03:13 called "loop"
my second cue point at 00:00:03:27 called "draw"
my third cue point at 00:00:05:24 called "bang"
my fourth cue point at 00:00:13:29 called "dead"
my fifth cue point at 00:00:14:29 called "You Lose"
my last cue point at 00:00:19:14 called "End"
Here is my action script 3 code
///first frame:
start_btn.addEventListener(MouseEvent.CLICK, startGame);
function startGame(event:MouseEvent){
gotoAndStop(2);
SoundMixer.stopAll()
stop();
///second frame:
stop();
var loopTime
var hitHim:Boolean = false;
var vConnection:NetConnection = new NetConnection();
vConnection.connect(null);
var vStream:NetStream = new NetStream(vConnection);
var client:Object = new Object();
client.onCuePoint = onCuePoint;
vStream.client = client;
var myVideo:Video = new Video(418, 480);
myVideo.y = 0; ///this adjusts where the video is, right now it is the size of the canvas which is 418,480
addChild(myVideo);
myVideo.attachNetStream(vStream);
vStream.play("michelle.flv");
var throw_bottle:Sound
throw_bottle = new Sound(new URLRequest("audio/throw_bottle.mp3")); //change to button noise, will add sound into ae file
target_mc.addEventListener(MouseEvent.CLICK, shoot);
target_mc.buttonMode = true;
target_mc.visible = false;
draw_mc.visible = false;
function onCuePoint(cuePoint:Object):void {
   if(cuePoint.name == "loop"){
loopTime = cuePoint.time;
    if(cuePoint.name == "draw"){
var randomLoop:Number = Math.random()*10;
if(randomLoop > 2){
vStream.seek(loopTime);
}else{
setChildIndex(target_mc, numChildren - 1);
setChildIndex(draw_mc, numChildren - 1);
target_mc.visible = true;
draw_mc.visible = true;
if(cuePoint.time == "5:24"){
draw_mc.visible = false;
target_mc.visible = false;
if(!hitHim){
vStream.seek(15);
if(cuePoint.name == "dead"){
vStream.close();
myVideo.clear();
gotoAndStop(3);
if(cuePoint.name == "end"){
gotoAndStop(3);
function shoot(event:MouseEvent){
throw_bottle.play();
hitHim = true;
///my third and last frame
playAgain_btn.addEventListener(MouseEvent.CLICK, playAgain);
function playAgain(event:MouseEvent){
gotoAndStop(2);
SoundMixer.stopAll()
stop();
When I have no audio it works perfectly, no problems. When I bring audio in i re-render it as a .mov file and bring it back into After Effects and add the cue points to it. Than i re-render it out again as a flv file. When i bring it into my flash project it will work when the looping variable does just one loop and my target will appear so you can click on it or not. But when the looping variable makes it loop 2 to 10 times it skips over the catching (the part of the clip if you clip the button) and goes directly to the dropping of the can, not giving you the option of clicking the button. So basically it skips the "draw" or second cue point of my game and goes to "You Lose" cue point.
Any suggestions?

Hi,
The latest audio driver for your machine is on the following link.
http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59649.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Uc560 - CUE Webinterface not reachable

Hello,
i have a problem with my UC560. Especially with the CUE Webinterface. After config my UC560 everthings working fine.
But the webinterface of the CUE is not reachable. I can ping the integtr. Service. Engine with IP 10.1.10.1. from my network.
A service-module integr.S.E. status reports -> everything OK. A seesion on CLI also connects and works.
Is there any idea ? help !!!
here some configs :
interface Integrated-Service-Engine0/0
description Interface used to manage integrated application modulecue is initialized with default IMAP group
ip unnumbered Vlan90
ip nat inside
ip virtual-reassembly in
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface GigabitEthernet0/1/3
description Interface used to communicate with integrated service module
switchport access vlan 90
no ip address
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface Vlan90
description $FW_INSIDE$
ip address 10.1.10.2 255.255.255.252
ip access-group 103 in
ip nat inside
ip virtual-reassembly in
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
ip dns server
ip nat inside source list 1 interface GigabitEthernet0/0 overload
ip route 10.1.10.1 255.255.255.255 Vlan90

Hello,
I have a similar issue. I know that there are many threads like this but this is the newest I found
I've wiped the preloaded configuration and now using the uc560 like a standard ISR. I've made a lot of tests and changes, using G0/0 and an IP for connecting to the LAN, or g0/1/0 as trunk/access port connecting to the LAN. I've ended up with the configuration I'm attaching. There is no way to have connectivity with the CUE. I've tried with and without VLANs (the file attached is with VLANs). NAT is irrelevant in my case since there is not anything to translate it's all a private routed network. I still cannot ping the ISE inf from inside the uc560 localy or the gateway address from inside the CUE.
This G0/1/3 seems to need some special configuration to be done in order to work. Do you know what is it?
It's also not possible to make the CUE to factory default. No initial setup wizard starts... nothing. No wizard needed for the initial setup like all the other CUE products?
Here is the config:
! interface GigabitEthernet0/0 no ip address duplex auto speed auto h323-gateway voip interface!interface Integrated-Service-Engine0/0 description Loopback interface used to manage integrated application module ip unnumbered Vlan2 service-module ip address 192.168.2.254 255.255.255.0 service-module ip default-gateway 192.168.2.2!interface GigabitEthernet0/1/0 switchport access vlan 2 no ip address!interface GigabitEthernet0/1/1 no ip address!interface GigabitEthernet0/1/2 no ip address!interface GigabitEthernet0/1/3 description Interface used to communicate with integrated service modue switchport access vlan 2 no ip address service-module ip address 192.168.2.254 255.255.255.0 service-module ip default-gateway 192.168.2.2!interface BRI0/1/0 no ip address isdn switch-type basic-net3 isdn point-to-point-setup trunk-group isdn 5!interface BRI0/1/1 no ip address isdn switch-type basic-net3 isdn point-to-point-setup trunk-group isdn 6!interface BRI0/2/0 no ip address isdn switch-type basic-net3 isdn point-to-point-setup! interface BRI0/2/1 no ip address isdn switch-type basic-net3 isdn point-to-point-setup!interface Vlan1 no ip address!interface Vlan2 ip address 192.168.2.2 255.255.255.0!ip forward-protocol ndip http serverno ip http secure-serverip http path flash:/gui!ip route 0.0.0.0 0.0.0.0 192.168.2.1ip route 192.168.2.254 255.255.255.255 Integrated-Service-Engine0/0!!!telephony-service no auto-reg-ephone max-ephones 15 max-dn 15 ip source-address 192.168.2.2 port 2000 secondary 192.168.2.3 rehome 15 time-zone 28 time-format 24 max-conferences 4 gain -6 moh flash:/media/music-on-hold.au multicast moh 239.0.0.1 port 16384 route 192.168.2.2 web admin system name admin password cisco time-webedit transfer-system full-consult create cnf-files version-stamp 7960 Mar 06 2013 15:02:09!
Thanks in advance!

Active Focal Point Not Shown in Software Using Back Button Focus

I use Back Button Focus (BBF) and set the focus point (using center spot).
In the software (DPP, ZoomBrowser or EOS Utility) the point I selected is not highlighted in the view window.
All points are shown, but none highlighted.
If I take the same shot using default focus method (shutter button AF), the point is highlighted .
Why is this?
Not too technical, please
Canon 3Ti, EF 50mm f/1.4 USM, EF-S 18-55mm f/3.5-5.6 IS II, EF-S 55-250mm f/4-5.6 IS II, 320EX Speedlite

Thanks.
I did just download and install the updates (DPP, EOS, Picture Style Editor and Zoom Browser).
Still no red focus point(s) shown with Back-button Focusing.
I searched on the web for this "symptom" and found, that I'm not alone.
It seems in Back-Button Focusing, the focus point won't be displayed unless you hold the back button down (* button in my case) while pressing the shutter button.
I tried holding the * button while taking a shot and yes the red box shows up.
This seems like defeating the usefulness of back button focusing. (???).
What do I know? I'm just a newbie.
Canon 3Ti, EF 50mm f/1.4 USM, EF-S 18-55mm f/3.5-5.6 IS II, EF-S 55-250mm f/4-5.6 IS II, 320EX Speedlite

Need several buttons that each target a video cue point but only one works

I have the code that works for one button to find a cue point but how can I make this work for several buttons and their respective cue points?
"seek-btn2" to find cue 2(named "lou2")
import fl.video.*;
// Video component instance name
var flvControl:FLVPlayback = display;
var flvSource:String = "lou.flv";
// Set video
flvControl.source = flvSource;
// Add seek functionality to the button
function seekHandler(event:MouseEvent):void
flvControl.seekToNavCuePoint("lou1")
//seek_btn is the button instance name
seek_btn.addEventListener(MouseEvent.CLICK, seekHandler);
when i repeat the last part of the code it does not work, thanks for your time....

Thanks but where would I insert that code and what would I take out from the original code I posted?
i tried this....
import fl.video.*;
// Video component instance name
var flvControl:FLVPlayback = display;
var flvSource:String = "lou.flv";
// Set video
flvControl.source = flvSource;
seek_btn1.cuePointName = new String();
seek_btn1.cuePointName = "lou1";
seek_btn1.addEventListener(MouseEvent.CLICK, onButtonPress);
seek_btn2.cuePointName = new String();
seek_btn2.cuePointName = "lou2";
seek_btn2.addEventListener(MouseEvent.CLICK, onButtonPress);
// onButtonPress function
private function onButtonPress(evt:MouseEvent):void {
flvControl.seekToNavCuePoint(evt.target.cuePointName);

Pause on Cue Point

I have set a cue point in my FLV at 58 seconds. Can someone
tell / show me
how I can add a pause to the video when it reaches that first
cue point. I
have it set (intially) called break and it is set to 'Event'.
Thanks. I am an eager noobie to Flash video and actionscript.

NetStream events have nothing to do with cue points.
onCuePoint method belongs to NetStream client. So, you will need
something like this:
client.onCuePoint = pointListener;
function pointListener (cuePoint:Object):void {
trace(cuePoint.name + " " + cuePoint.time);
In a nutshell NetStream events are fired when changes occur
in video delivery (buffer, start, pause, etc.) - not video content.
More information:
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/net/NetStream.html
As for your code, your syntax is not correct.
You wrote: vid.addEventListener(NetStatusEvent.NET_STATUS,
"myFirstCuePoint");
If you listener function is myFirstCuePoint you need to
write:
vid.addEventListener(NetStatusEvent.NET_STATUS,
myFirstCuePoint); - no quotes.
Also, I don't use FLVPlayback - it has it's own methods and
events. What I wrote pertains to the cases when NetSream and
NetConnection are used stand alone.

Reading cue point parameters on video start

Im trying to create a table of contents to navigate to various points in an .FLV file. I've encoded the flv with cue points in media encoder. I've also added a parameter to each cue called toc_title with the lable that should represent the time in the video to jump to. It occurred to me though that those parameters might not be available to my flash player until the frame of the cue was reached. I need my toc to be visible when the video starts. First of all, is this entirely the wrong approach? I want to make this video player as dynamic as I can and would like to reuse it for several different videos with different TOCs. Is the parameter data set on cue points available at any time in the video playback or only when the cue is reached? Thanks, John

Hi John, You may receive more advice and help on the Flash forum. You can start a thread there or perhaps some threads may already be discussing your concerns.
http://forums.adobe.com/community/flash/flash_general?view=discussions&start=0
Hope that helps.
eidnolb

Cue Points not highlighted - gggrrr

Similar Messages

Maybe you are looking for