CUE Script Editor 3.1 Download
Hi,
I am looking for the software, but cannot find it in the normail downloading area. Can someone please put a link here?
Thanks.
Hete you go: http://www.cisco.com/cgi-bin/tablebuild.pl/cue-311-utilities
brandon
Similar Messages
-
Hi anybody,
Looks like my cco account cannot even download the CUE Script Editor application from the website. Can anyone provide that and zipped up ?
Need that desperately for amend some scripting. Many ThanksYou need to acquire the software through cisco.com for tracking purposes.
If you don't have access to certain software on your cisco.com account, then try:
Customer Service: 1-800-553-6387
1) Old option- 1
2) Then option-4
3) Then option- 3
4) lastly option-6
Please note that this support is not the regular GCC support. This is
the customer service for all issues non-techinal or semi-technical in
nature and they use their own Service requests so do not recommend
customer to refer TAC Sr's. -
Hi..
I have cue script editor 6.1. I have written a new script and have uplaoded the script into the CUE but I donot see the Edit otion for the script I have written.
The below image is the screenshot of the CUE. The Bergentowncentre.aef was created by our vendor, the below one-test.aef is the one I created and as u see I donot have the Edit option there.
Please suggest.You can hire a reputable professional to help you.
-
I would like to create a workflow in Automator or a script in AppleScript (or a combination of the two), that opens Safari to a specified page and downloads an excel file from this page and saves the downloaded document to my desktop.
Is this something that be done? If so, how?
I have so far been able to build a workflow in Automator to open Safari and added an AppleScript that takes Safari to a specific page that has an Excel document.
I can't figure out where to go from here... Any help would be apprecitated.
Thanks!Would you have the web address the excel sheet is on?
Is there a simular web page you could point to if not?
Would there be a copy of the file on an FTP page. This would be easier.
curl
http://www.cyberciti.biz/faq/mac-os-x-terminal-download-file/
http://www.thegeekstuff.com/2012/04/curl-examples/
http://curl.haxx.se/docs/manpage.html
Macintosh-HD -> Applications -> Utilities -> Terminal
# Press return to run a command.
the curl is a terminal command ( Unix ). It allows you to read a file off of the web.
man curl
provides cryptic information on the commnad curl.
press the space bar to advance a page.
press letter to q to quit.
What you may have to is to read in the web page as a text file. Go "fishing" through the page to find the excel file you need. Once you find the file, you can use curl to read the file.
curl is a very full featured command. (read complex to figure out ).
It is easier to diagnose problems with debug information. I suggest adding log statements to your script to see what is going on. Here is an example.
Author: rccharles
For testing, run in the Script Editor.
1) Click on the Event Log tab to see the output from the log statement
2) Click on Run
For running shell commands see:
http://developer.apple.com/mac/library/technotes/tn2002/tn2065.html
on run
-- Write a message into the event log.
log " --- Starting on " & ((current date) as string) & " --- "
-- debug lines
set desktopPath to (path to desktop) as string
log "desktopPath = " & desktopPath
set unixDesktopPath to POSIX path of desktopPath
log "unixDesktopPath = " & unixDesktopPath
set quotedUnixDesktopPath to quoted form of unixDesktopPath
log "quoted form is " & quotedUnixDesktopPath
try
set fromUnix to do shell script "ls -l " & quotedUnixDesktopPath
display dialog "ls -l of " & quotedUnixDesktopPath & return & fromUnix
on error errMsg
log "ls -l error..." & errMsg
end try
end run -
Beginning with Version 6 and now with Version 7, I've been getting a hang and this message when I download:
Script: chrome://mozapps/content/downloads/downloads.js:1203
Stop Script or continue?
I have Mac 1.83GHz Core Duo 2GBramHi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down Cmnd+ alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Now launch PSE and check if it works. -
Can't launch Script Editor 2.2.1. It silently quits.
Script Editor 2.2.1, which comes along with the latest Security Update, will not launch. It's icon is generic too. I have re-downloaded and re-run the Security Update with no improvement.
Console reports this much:
Tuesday, October 21, 2008 7:37:56 PM US/Eastern
Oct 21 19:38:03 mini Script Editor[209]: Unable to load nib file: SEMainMenu, exiting
Oct 21 19:38:03 mini com.apple.launchd[124] ([0x0-0x28028].com.apple.ScriptEditor2[209]): Exited with exit code: 1
I also discovered the new Script Editor (showing package contents) doesn't have any of the numerous "SE" files in its Resources folder like version 2.2 does.For anyone who still needs an answer to this topic (like I did)...
I have uploaded the required resource files that are needed to run this corrupted Script Editor here:
http://www.esnips.com/doc/37fb3e73-67f4-4ae6-9cd0-f7d9da5e3a5e/Script-Editor-Res ource-Files
Just put this folder in the Script Editor Contents folder.
Let me know of any problems if anyone tries this please.
Message was edited by: yjstevo_10 -
Is Script Editor 2.0 latest?
Script Editor seems to have disappeared from my machine. I've been using Smile, so I didn't miss it, but now I want to test with Script Editor before I deliver an AppleScript to a client who doesn't have need nor want Smile.
Apple->Support->Downloads offers Script Editor 2.0 that works with Jaguar and up. Is this really the latest available?
My client recently installed Tiger. Can I expect Script Editor 2.0 to be on his machine, or might I have to load it?
I wonder what happened to my copy? I don't normally throw Apple apps away.
--GilSpyros: The folder of interest in your Applications folder is not "Script" but "AppleScript". Is that folder empty?
Dott: I guess it would be great, but it feels weird. Apple must have a solution here somewhere.
Let me suggest that either of you post a fresh question, as this one has already been "answered". Perhaps doing so will attract someone more knowledgable on this point.
--Gil
12 inch PB G4 w/20 inch Flat Plane Array Mac OS X (10.4.5) /Applications/AppleScript/Script Editor.app -> 2.1.1 -
MDS, Script Editor WebPart does not load javascript files with script tag
Hello everyone,
I have MDS and I would like to use some custom Javascript inside of a script editor web part in a page of my site.
When I add the references to the libraries I need in the Script Editor Web Part SharePoint is smart enough to disable MDS on that page.
I would like to be able to load external libraries inside of my Script Editor Web Part (without using ScriptLink or anything that would require the edition of the masterpage) but still using the added value of MDS.
Can I use SOD for that? What would be the best pattern? Could you provide a simple example?
Thanks in advance for your help!Hi,
Per my knowledge, including CSS and JavaScript files using HTML style and script tags is not supported in MDS(Minimal Download Strategy).
We can refer the custom JavaScript file in the .aspx page or master page using ScriptLink control.
<SharePoint:ScriptLink language="javascript" name="custom_javascript.js" runat="server" />
The following articles for your reference:
http://sharepointsnacks.blogspot.com/2014/02/sharepoint-2013-minimal-download.html
http://tech.bool.se/make-javascript-code-work-with-minimal-download-strategy-part-2/
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support -
Converting CUE script to UCCX script
Is there a tool available to convert CUE scripts to UCCX scripts?
Is there any method available to convert a CUE script to a UCCX script?Hi
No - the two are very different products (though the editors look similar, and perform similar functions) in terms of capabilities etc. The steps in use will be very different so they won't load into the other editor.
There's no automated tool either...
Regards
Aaron
Please rate helpful posts.. -
Unable to login via Internet Script Editor
I have a user that is unable to open / login Internet Script Editor on any computer using her username and password. The error message is "The user credentials you supplied were not accepted by the server. Please contact the Web server's administrator to verify you have permission to log on."
We can login and open with other users that have the same access permissions. We have also tried configuring the Internet Script Editor to access the other AW but the message is the same.
Any ideas?
Thanks
VictorI just remember that there used to be a problem once with a certain version of Putty 0.61 defaulting to GSSAPI... Perhaps that is the problem. Please see here: OEL 5.5 - access denied .... but not!
Otherwise, try to login using ssh -vvv username@hostname and see there it stops. Have you previously configured or modifed /etc/ssh/sshd_config?
Debugging the connection in Putty is very inconvenient. You can download a free copy of MobaXterm (home edition) to enter ssh -vvv.... from MobaXterm free Xserver and tabbed SSH client for Windows -
External Script Editors?
Does anybody have suggestions for external script-editors
that work with
Lingo? I've tried the usual searches, but the first several
pages of Google
all seem to link to the same program (lingo script editor
0.42) whose
website is now defunct - www.creative-inspiration.net (Don't
bother clicking
that link, there's nothing there.) I don't know if that
specific program
is what I'm looking for (can't even get a screenshot), but
it's the only one
that seems to appear on searches, and it doesn't even exist
anymore, so I
don't know where else to look. Ideally, something that works
from within
the Director authoring environment would be best, I'm not
sure how many fit
the bill for that, but I'm getting pretty sick of all the
annoying bugs and
lack of features in the default internal editor. (Is
highlighting of
corresponding parentheses too much to ask? Every other code
editor in the
world does it, but not Director's for some reason. Also
collapsable code
blocks would be nice, and a "what links here" feature like on
wikis to track
code a bit better would be really invaulable. Heck, even a
back-button to
go back to the last script you were working on? Nah, that's
just asking too
much.)> you need to do searches for general editors which allow
you to use a
> keyword
> highlight file for Director or Lingo or .ls format.
>
> Here's one called HiEditor:
>
http://programmerstools.org/node/701
> - click on the HiEditor.zip link under File:
>
> .ls syntax file here:
>
http://www.winasm.net/forum/index.php?showtopic=2220
Is there a different version of HiEditor somewhere? Because
the one you
pointed me to doesn't seem to have any such features at all,
basically just
seems to be Notepad with tabs. The Options menu doesn't seem
to have
anything that would allow you to do script highlighting,
auto-indent, or
basically anything except font and size. There's also no Help
file at all,
nor any info on the site about how to use this.
> Or better yet, UltraEdit (but it costs $):
>
http://www.ultraedit.com/downloads/ultraedit_download.html
> Here's the word file page:
>
http://www.ultraedit.com/downloads/extras.html#wordfiles
> - search for Lingo and you should find two entries.
I looked at UltraEdit - played around with the shareware
version a bit.
Looks like it's got most of the features I was looking for,
though certain
things I can't get to work properly. (e.g. Auto-indents for
case
statements, proper indenting of lines with if/then and
command on the same
line, a few others) Also $50 is a bit steep for a
text-editor, I think.
Maybe I can get my boss to pay for it, (though not if it
comes at the cost
of my paycheck, you know how it is...) -
ICQ Problems with Script Editor
I have installed ICQ on my MacBook Pro, but as I run the program , the script editor opens instead of ICQ. Does anyone have any idea why?
*"Does anyone have any idea why?"*
Yes...because ICQ for Mac has not been updated in over 5 years.
Download and use Adium for your IM needs. -
Length of if statement in script editor is more than two lines
dear friends
when i am modifying the purchase order with new purchase organisations in script editor , i found that the line continued to both left and right pages, if i want to extend the line there is no 3 rd page. how can i extend the if statement.
regards,
k.srinivas.Hi,
After complete of line , Please Enter Shift+F8.
Regards
jana -
[newbie qn] script runs under Script Editor but not as application
I have a simple script that runs successfully under the Script Editor. The script is:
tell application "Safari"
activate
tell (make new document) to set URL to "http://www.google.com"
end tell
However, when I tried to run it as an application, I encountered the error 'Can't set document "Untitled" of application "Safari" to "http://www.google.com".'
How should I rewrite the script so that it would run as an application? Thanks!Hi PointZero01
Your script compiles and works fine saved as an application and tested under 10.5.6.
slightly different but does exactly the same
tell application "Safari"
activate
make new document
set URL of document 1 to "http://www.google.com"
end tell
Budgie -
Script Editor does not work. Panel blue and empty.
Hi
I installed Oracle Database XE yesterday on
Acer TravelMate C300, Microsoft XP SP2 Tablet Edition
and ..
I cannot read SQL scripts
I cannot access to the editing panel of Scripts Editor when I want to create a new script.
I used System and HR login.
The panel is blue and empty.
Thank you for any information
Best regards
JRD120I cannot read SQL scriptsWhere you want to read SQL scripts?
I cannot access to the editing panel of Scripts
Editor when I want to create a new script.About which "Scripts Editor" you talking about? From TOAD?
The panel is blue and empty.Panel??
Maybe you are looking for
-
EXPORT/IMPORT TABLE DATA FROM ONE SCHEMA TO ANOTHER ONE (S.O.S)
Hi, I urgently need your help:(, I have two different instances, in each of them there are two schemas, A and B; which tables are the same, but I need to transfer JUST the table data from A's tables to B's tables, how can I do so?? Thanks in advance,
-
Hello Gurus, How to calculate the cost price of an Article in Retail, how does the system calculate it? I did try looking for SAP note for help. However I couldnu2019t find one. Would appreciate your responses. Thank you for your time in advance. Re
-
Help! LDAPRealm and Site Server
We are going to implement security based on LDAP directory. I must setup LDAPRealm using Site Server. According to Weblogic Service Pack 6, Sun's JNDI service provider doesn't work with Site Server (and it is not). I set-up Netscape's as was advised.
-
Hi all, this is my first post here, I hope you guys can help me out. I'm creating a inbox where users will be able to receive messages. I need to set it so that when they click on one of the messages in the inbox, the body of the message gets display
-
Email Password after reset, using PLSQL or Java
Hi, Through user management, users passwords can be reset and sent via email automatically. Which database procedure behind the scene is used for this? I've created a script to automate user creation and I need a way to email the passwords to users a