CUE Script Editor

Hi anybody,
Looks like my cco account cannot even download the CUE Script Editor application from the website. Can anyone provide that and zipped up ?
Need that desperately for amend some scripting. Many Thanks

You need to acquire the software through cisco.com for tracking purposes.
If you don't have access to certain software on your cisco.com account, then try:
Customer Service: 1-800-553-6387
1) Old option- 1
2) Then option-4
3) Then option- 3
4) lastly option-6
Please note that this support is not the regular GCC support. This is
the customer service for all issues non-techinal or semi-technical in
nature and they use their own Service requests so do not recommend
customer to refer TAC Sr's.

Similar Messages

CUE Script Editor 3.1 Download

Hi,
I am looking for the software, but cannot find it in the normail downloading area. Can someone please put a link here?
Thanks.

Hete you go: http://www.cisco.com/cgi-bin/tablebuild.pl/cue-311-utilities
brandon

CUE script edit problem

Hi..
I have cue script editor 6.1. I have written a new script and have uplaoded the script into the CUE but I donot see the Edit otion for the script I have written.
The below image is the screenshot of the CUE. The Bergentowncentre.aef was created by our vendor, the below one-test.aef is the one I created and as u see I donot have the Edit option there.
Please suggest.

You can hire a reputable professional to help you.

Converting CUE script to UCCX script

Is there a tool available to convert CUE scripts to UCCX scripts?
Is there any method available to convert a CUE script to a UCCX script?

Hi
No - the two are very different products (though the editors look similar, and perform similar functions) in terms of capabilities etc. The steps in use will be very different so they won't load into the other editor.
There's no automated tool either...
Regards
Aaron
Please rate helpful posts..

Length of if statement in script editor is more than two lines

dear friends
when i am modifying the purchase order with new purchase organisations in script editor , i found that the line continued to both left and right pages, if i want to extend the line there is no 3 rd page. how can i extend the if statement.
regards,
k.srinivas.

Hi,
After complete of line , Please Enter Shift+F8.
Regards
jana

[newbie qn] script runs under Script Editor but not as application

I have a simple script that runs successfully under the Script Editor. The script is:
tell application "Safari"
activate
tell (make new document) to set URL to "http://www.google.com"
end tell
However, when I tried to run it as an application, I encountered the error 'Can't set document "Untitled" of application "Safari" to "http://www.google.com".'
How should I rewrite the script so that it would run as an application? Thanks!

Hi PointZero01
Your script compiles and works fine saved as an application and tested under 10.5.6.
slightly different but does exactly the same
tell application "Safari"
activate
make new document
set URL of document 1 to "http://www.google.com"
end tell
Budgie

Script Editor does not work. Panel blue and empty.

Hi
I installed Oracle Database XE yesterday on
Acer TravelMate C300, Microsoft XP SP2 Tablet Edition
and ..
I cannot read SQL scripts
I cannot access to the editing panel of Scripts Editor when I want to create a new script.
I used System and HR login.
The panel is blue and empty.
Thank you for any information
Best regards
JRD120

I cannot read SQL scriptsWhere you want to read SQL scripts?
I cannot access to the editing panel of Scripts
Editor when I want to create a new script.About which "Scripts Editor" you talking about? From TOAD?
The panel is blue and empty.Panel??

How to define variables in toad sql script editor - newbie

I have just pull out the script of a Function and want to run it on toad SQL editor.
I am little bit confused how to define the VARIABLEs here in toad SQL editor to run my script.
SELECT
NVL(SUM(debit), 0) - NVL(SUM(credit), 0)
INTO l_accountBalance
FROM
GLP_VoucherMaster vm
INNER JOIN GLP_VoucherDetail vd ON vm.GLP_VoucherMaster_ID = vd.GLP_VoucherMaster_ID
INNER JOIN GLP_ChartOFAccounts coa ON vd.GLP_ChartOfAccounts_ID = coa.GLP_ChartOfAccounts_ID
WHERE
vm.isActive = 'Y' AND vd.isActive = 'Y'
-- *** how to define variables in toad sql script editor ***
AND vm.voucherDate < p_cDate
AND coa.AccountCode LIKE p_accountCode || '%';
Thanks
w\

Just prefix with a colon (:)
SELECT   NVL (SUM (Debit), 0) - NVL (SUM (Credit), 0)
INTO   L_accountbalance
FROM           Glp_vouchermaster Vm
             INNER JOIN
                 Glp_voucherdetail Vd
             ON Vm.Glp_vouchermaster_id = Vd.Glp_vouchermaster_id
         INNER JOIN
             Glp_chartofaccounts Coa
         ON Vd.Glp_chartofaccounts_id = Coa.Glp_chartofaccounts_id
WHERE       Vm.Isactive = 'Y'
         AND Vd.Isactive = 'Y'
         AND Vm.Voucherdate < :P_cdate
         AND Coa.Accountcode LIKE :P_accountcode || '%';
/:p

Data access error while running the script in fdm workbench script editor

Hello Experts,
I have been getting the error when i run the script in script editor of fdqm workbench client.this is the error
                          -2147467259 Data access error and it is navigating the error at line 30 about this script "Set rsAppend = DW.DataAccess.farsTable(strWorkTableName)"
Please revert me asap where i should load the data from peoplesoft to one of my planning database through fdm.
Thanks in advance...

Hi,
Thanks for your suggestion's here i am going to run the datapump script so while i am running in workbench it is throwing data access error.So as you guy's suggested i created one import format and added this script to that import format which is added to one of my location even it is throwing the same error.I am getting the error at this sentence   "strWorkTableName" I want to know what is this where it reflect's?So my question is Is there any difference while running data pump or integration script.Please let me know a detailed navigation steps to run this script's with out data access error to run these kind of scripts.
Note:Again my target is to load the data to planning database through fdqm which i am doing through sql statement's.
Suggest your valuable suggestion's
Thanks in advance...
I am getting the error at this sentence   "strWorkTableName" I want to know what is this where it reflect's?

Script works in Script Editor, when saved as app, no longer works

I've been playing around with AppleScript trying to learn a little. I wrote an app to fullscreen the current application. First I wrote one to full screen a specific app:
tell application "Safari"
set the bounds of the first window to {0, 0, 1440, 894}
activate
end tell
This worked without any problems and I set a keyboard shortcut to activate it.
Then I decided to make it work for the current app:
tell current application
set the bounds of the first window to {0, 0, 1440, 894}
end tell
When I ran it in Script Editor, it worked fine and set the bounds of the Script Editor window to what I asked. When I save it as an application the same way I did the first app, it doesn't work. I get the error message "Can't set the bounds of window 1 to {0, 0, 1440, 894}." I tried it on the same Script Editor window it worked on when I simply clicked run, but I keep getting the error message.

try something like this saved as an app
tell application "AppleScript Editor"
activate
make new document
set the bounds of the first window to {0, 0, 1440, 894}
make new paragraph at beginning of document 1 with data "hello world"
end tell
tell application "TextEdit"
activate
make new document
set the bounds of the first window to {0, 0, 1440, 894}
make new paragraph at beginning of document 1 with data "hello world"
end tell
Budgie

Links to launch Script Editor no longer work

Links to launch Script Editor no longer work.

I don't know, I just use a very simple Applescript to enclose the clipboard in tags that allow the user to launch Script Editor from the browser:
set the clipboard to "<a href=applescript://com.apple.scripteditor?action=new>Click here to launch Script Editor</a>.
<pre class=COMMAND>" & return & (the clipboard) & return & "</pre>"
And it wraps the script on the clipboard on PRE tags so the structure is preserved. Neither of those work now.

A program which used to open in Classic now opens in Script Editor

I am using an old web design program by Symantec called Visual Page 1.1.1. It has worked fine for several years, but yesterday I opened it and instead of opening in Classic, it tried to open in "Script Editor" in OSX. Classic never opened at all. I have tried reinstalling it but the same problem occured. I tried using "Open with" Classic on the Info page, but Classic is greyed out. Can anyone help? I am starting to import the pages into a new program (Freeway) but this will take forever. I would like to still be able to work with this program. Thanks for any assistance. (I called Symantec and the program is too old for them to help with.)

And Get Info shows it as a Script Editor document ? rather than Classic Application ?
I had this about a year ago, but for the life of me, I can't remember what I did to fix it. I may have posted here when I got desperate. A search in discussions for Script Editor and Classic may come up with something.
Edit:
===
http://discussions.apple.com/thread.jspa?messageID=4762745&#4762745

Create a counter for the rows in a table using script editor?

Hi ,
I want to add afield in a particular table with first field is its serial number . How to use scripting editor to fill the serial number ?
How to create a counter ?
Edited by: Rajan.Dexter9 on Jan 30, 2012 9:40 PM

Hello Rajan,
Create a field in the table and name it as 'SERIAL'. Create a variable called 'count' with default value as 0. Now in script editor, for javascript language and calculate event, write the following script.
var fields = xfa.layout.pageContent(xfa.layout.page(this)-1, "field", 0);
for (var i=0; i <= fields.length-1; i++)
     if (fields.item(i).name == "SERIAL")
          count.value = count.value + 1;
                 this.rawValue = count.value;

Can not open script editor in HDS

Hi everybody,
When we open Script Editor, we see the notice: "cannot connect to distributor, script editor will now exit"
Can you help me to resovle it?
We use ICM 7.1
Thanks you so much!

You might also see this message if the services are running, but you are using Windows Remote Desktop (RDP), and are not logged in with console mode.
Try this: mstsc aaa.bbb.ccc.ddd /admin
where aaa.bbb.ccc.ddd is the IP address or hostname of your HDS. The /admin switch gets you in with console mode.
Net-net, you should see the ICM process' console windows on the taskbar. If you don't, then either the service isn't running, or you're not in /console mode.
fyi - ICM 7.1 is long-since end-of-life. You should seriously consider upgrading to a more recent, supported release.

UCCX 9.0 - Issue Retrieving Dialer fields in script editor

Hi Experts,
In IVR campaign I am trying to retrieve BAAccount number field in the script editor but no success. I tried the below options in the UCCX script editor but it didn't work. Once contact is uploaded, dialer fields are sent to IVR application by default or is there any settings we need to do in UCCX admin? Thanks in advance for your help!
1) Tried through ECC variables in Get Enterprise Call Info element
2) Getting as session data through Get session element
Thanks
Rajasekar

Adding Anirudh Ramachandran and Abhiram Kramadhati

CUE Script Editor

Similar Messages

Maybe you are looking for