CUE upgrade from 2.3.3 to 7.X
HI,
We are upgrading Our existing IPT & IPCC clusters.
Last weekend we have upgarde the CUCM from 5.1 to 7.1.6 sucessfully.
This weekend we are planning to upgrade the CUE xpress to 7.X
I would like to know Upgrade path, strategy, Planning and also the recomended Software report for the upgrade.
Do let me know if you require any more information as we are planning the upgarde this weekend.
Thanks & Regards,
JF
Instructions on how to perform the upgrade can be found in the following link,
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel7_1/install/install.html
I would advise performing a backup before proceeding with the upgrade.
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel2_3/cliadmin/ch5bkrst.html
-Felipe
Similar Messages
-
CUE Upgrade from 8.6.1 to 8.6.7 version
Hi,
I am currenty running CUE (NME-CUE) version 8.6.1 on router 2851, I want to upgrade to version 8.6.7 (provide support CUCM 9.1).
can somebody tell me In what case is used command "software install clean" and in what case is used command "software install upgrade"?
Apprecaite your help.
Best regards,
TanHi Tan,
can somebody tell me In what case is used command "software install clean" and in what case is used command "software install upgrade"?
A "software install clean" is used when you would need to do a fresh install, while the
"software install upgrade" would be used for upgrading from 8.6.1 to 8.6.7
As per document and command reference:
Several processes are available for upgrading Cisco Unity Express software. Choosing a process depends on the type of upgrade required.
•Upgrade installation—Upgrade using the online installer with the software install upgrade command. This process is available for upgrading from the previous software release to the current one, such as upgrading from 2.1.3 to 2.2.
Using this process, the system remains operational while the new software files are downloaded in the background. Only an FTP server is required. See "Upgrading the Previous Software Image" for more details.
•Clean installation—Upgrade using the online installer with the software install clean command. This installation process is available for upgrading licenses and for upgrading software releases later than 2.0 to the current one.
Using this process, the system remains operational while the new software files are downloaded in the background. For a new license, you must back up and restore configuration files; for a new software image, you must back up and restore both configuration and data files. Only an FTP server is required. See "Upgrading to a New License" or "Installing a New Software Image" for more details.
•Clean installation with the boot helper—Upgrade using the boot helper with the software install clean command. This clean installation process is available for upgrading licenses, upgrading software releases prior to 2.0.1 to the current release, and when the other upgrade processes are unsuccessful.
Using this process, the system must be offline while the new software files are downloaded. This installation erases and repartitions the disk before loading the new files on the disk. You must back up and restore your configuration and data files. Both an FTP and a TFTP server are required. See "Installing a Software Image Using Boot Helper".
Kindly rate the post accordingly.
Regards,
Kevin -
NOT ABLE TO UPGRADE FROM CUE 1.1.2 TO CUE 2.3.1
Hello,
I am trying to upgrade from CUE Ver 1.1.2 TO CUE 3.2.1 by "Upgrading Using the Boot Helper" method
but after uploading the "cue-installer.2.3.1" from the TFTP the system boots up but it does not show me the
"Service Engine Helper Software" Its booting directly and going to the CUE Prompt.
MODULE DETAILS
Module Type: NM
NAME: "NM-SE on Slot 1", DESCR: "NM-SE"
PID: NM-CUE , VID: NA ,
sh software versions
Installed Packages:
- Core 1.1.2
- Auto Attendant 1.1.2
- Voice Mail 1.1.2
- Boot Loader 1.0.17 Installed Languages: - US English 1.1.2
According to the document
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel2_3/install/upg_boot.html#wpxref53388
After "cue-installer.2.3.1" is loaded i should get the prompt as given below
Welcome to Cisco Systems Service Engine Helper Software
Please select from the following
1 Install software
2 Reload module
(Type '?' at any time for help)
Choice: 1
but i don't see this prompt.Also interestingly I don't see this command
"software download clean pkg ..... " In fact "software" does not appear as an option under any
mode in CLI......
Quick help will be much appreciated!!!!
Thanks & Regards,
Hasan JafriHello Paulo ,
Given below is what i see on the CLI
se-10-1-1-10> reload
Are you sure you want to reload?
Doing a reload will cause any unsaved configuration data to be lost.
Continue[y]? : y
se-10-1-1-10>
MONITOR SHUTDOWN...
EXITED: ${ROOT}/bin/probe exit status 0
EXITED: SQL_startup.sh exit status 0
EXITED: LDAP_startup.sh exit status 0
EXITED: HTTP_startup.sh exit status 0
MONITOR EXIT...
INIT: Remounting device 03:01 ... OK
Done.
Restarting system.
Initializing memory. Please wait. 256 MB SDRAM detected
BIOS Version: SM 02.00
BIOS Build date: 09/17/02
System Now Booting ...
Booting from flash..., please wait.
[BOOT-ASM]
7Found Intel 82371AB at 0x00000000 ROM address 0x00000000
Please enter '***' to change boot configuration: ***Probing...[EEPRO100]Found I // I DO THIS AND GO INTO THE BOOT-LOADER
ntel EtherExpressPro100 at 0x00000000 ROM address 0x00000000
Found Intel EtherExpressPro100 at 0x00000000 ROM address 0x00000000
Ethernet addr: 00:14:1C:95:FC:A2
equalizer val: 16
ServicesEngine Bootloader Version : 1.0.17
ServicesEngine boot-loader> boot helper // THEN I TYPE "boot helper"
Probing...[EEPRO100]Found Intel EtherExpressPro100 at 0x00000000 ROM address 0x
00000000
Found Intel EtherExpressPro100 at 0x00000000 ROM address 0x00000000
Ethernet addr: 00:14:1C:95:FC:A2
equalizer val: 16
Me: 10.1.1.10, Server: 10.1.1.55, Gateway: 10.1.1.11
Loading cue-installer.2.3.1 //AFTER THIS STEP CUE RELOADS IT SELF
Initializing memory. Please wait. 256 MB SDRAM detected
BIOS Version: SM 02.00
BIOS Build date: 09/17/02
System Now Booting ...
Booting from flash..., please wait.
[BOOT-ASM]
7Found Intel 82371AB at 0x00000000 ROM address 0x00000000
Please enter '***' to change boot configuration: Filesystem type is reiserfs,
partition type 0x83
kf: a1 : (hd0,0)/bzImage root=/dev/hda1 ro plat=nm
kf: a2 : (hd0,0)/bzImage root=/dev/hda1 ro plat=nm
in grub_open: (hd0,0)/bzImage root=/dev/hda1 ro plat=nm
in grub_open1: /bzImage root=/dev/hda1 ro plat=nm
in grub_open2: /bzImage root=/dev/hda1 ro plat=nm
in grub_open3: /bzImage root=/dev/hda1 ro plat=nm 1
in grub_open: (hd0,0)/bzImage root=/dev/hda1 ro plat=nm
in grub_open1: /bzImage root=/dev/hda1 ro plat=nm
in grub_open2: /bzImage root=/dev/hda1 ro plat=nm
in grub_open3: /bzImage root=/dev/hda1 ro plat=nm 1
In verify_kernel_sig
Chksum: final image size: 809372
plat: 1
Debug: bl_sz: 115296
After: buf_len: 2048
After KEY_InitMem
reading key: 0
reading key: 1
reading key: 2
reading key: 3
reading key: 4
reading key: 5
After karr
After 2: buf_len: 2048
sig len : 172
in verifysignature_md5, MD5 hash generated now, str format:hexmd5:bfb41f99bd669
c4df612cb94f2e81764
Verifying signature now...
calling RSA decrypt now
mem ptr: 0 704 832 968 1040 1172 1184 1196 1208 1220 1228 1244 1268 1284 1300 1
316 1332 1344 1360 1384 1400 1664 1804 2080 2224 2364 2880 3396 3660 3924 4188
RSA decrypt returned:33
verifysignature_md5, Orig MD5 hash generated during encryption:bfb41f99bd669c4d
f612cb94f2e81764
Kernel signature verified successfully
In load_imagea1
In load_imagea2
Dbg ********* filemax/data_len/SECSIZ: 809372/2560/512
[Linux-bzImage, setup=0xa00, size=0xc4d9c]
kernel_func: kt: 3
in boot func: kt: 3
Linux version 2.4.18 (bld_adm@bld-system) (gcc version 2.95.3 20010315 (release)
) #5 Sun Sep 19 22:25:25 PDT 2004
Platform: nm
setup.c: handling flash window at [15MB..16MB]
setup.c: handling kernel log buf at [245.5MB]
setup.c: handling trace buf at [246MB]
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0800 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000000f00000 (usable)
BIOS-e820: 0000000000f00000 - 0000000001000000 (reserved)
BIOS-e820: 0000000001000000 - 000000000f580000 (usable)
BIOS-e820: 000000000f580000 - 000000000f600000 (reserved)
BIOS-e820: 000000000f600000 - 0000000010000000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
On node 0 totalpages: 62848
zone(0): 4096 pages.
zone(1): 58752 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda1 ro plat=nm
Initializing CPU#0
Detected 498.673 MHz processor.
In serial_console_setup
Calibrating delay loop... 996.14 BogoMIPS
Memory: 244056k/251392k available (1027k kernel code, 5924k reserved, 661k data,
84k init, 0k highmem)
kdb version 2.3 by Scott Lurndal, Keith Owens. Copyright SGI, All Rights Reserve
d
in atrace_init
log_head: h: 0, t: 5717961, l: 0, w: 0, s: 10484672
Using existing trace log
log_head: h: 0, t: 5717961, l: 0, w: 0, s: 10484672
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xeab9c, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
devfs: v1.10 (20020120) Richard Gooch ([email protected])
devfs: devfs_debug: 0x0
devfs: boot_options: 0x1
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Cisco ContentEngine Flash Driver Version 0.02
block: 128 slots per queue, batch=32
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
hda: C/H/S=50127/232/176 from BIOS ignored
hdb: C/H/S=0/0/0 from BIOS ignored
hda: IC25N020ATMR04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 39070080 sectors (20004 MB) w/1740KiB Cache, CHS=38760/16/63, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1
device capacity not supported
Flash capacity == 39070080
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.
html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@sa
w.sw.com.sg> and others
eth0: PCI device 8086:1229, 00:14:1C:95:FC:A1, IRQ 9.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 668081-002, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Receiver lock-up workaround activated.
eth1: PCI device 8086:1229, 00:14:1C:95:FC:A2, IRQ 10.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 668081-002, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Receiver lock-up workaround activated.
IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
reiserfs: checking transaction log (device 03:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Init drive control
Freeing unused kernel memory: 84k freed
INIT: version 2.84 booting
Started device management daemon v1.3.25 for /dev
reiser root fs ...
Reiserfs super block in block 16 on 0x301 of format 3.6 with standard journal
Blocks (total/free): 4883752/4804594 by 4096 bytes
Filesystem is cleanly umounted
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
FILESYSTEM CLEAN
Remounting the root filesystem read-write...
kernel.sem = 16384 32000 32 128
Welcome to Cisco Service Engine
Sun Aug 14 21:49:14 PDT 2005
WARNING: Found files describing previous failures...
Saving them in /var/cores.prev
********** rc.aesop ****************
WARNING: Found files describing previous failures...
Saving them in /var/javacores
==> eth1 exists, we must be running on a Network Module
==> eth1 exists, we must be running on a Network Module
Router communications servers initializing...complete.
IOS IP Address Registration complete.
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.1.1.0 * 255.255.255.0 U 40 0 0 eth1
127.0.0.0 * 255.0.0.0 U 40 0 0 lo
default 142.1.66.254 0.0.0.0 UG 40 0 0 eth1
Reading Manifest...done.
Reading License ...done.
ModuleType = nm
INIT: Entering runlevel: 2
********** rc.post_install ****************
INIT: Switching to runlevel: 4
INIT: Sending processes the TERM signal
STARTED: cli_server.sh
STARTED: ntp_startup.sh
STARTED: LDAP_startup.sh
STARTED: superthread_startup.sh
STARTED: SQL_startup.sh
STARTED: HTTP_startup.sh
STARTED: ${ROOT}/usr/wfavvid/run
STARTED: ${ROOT}/bin/probe
waiting 132 ...
SYSTEM ONLINE
se-10-1-1-10>
According to the document when the CUE reloads it should give me the option to install the software or reload ?
Am i doing the right way ??
Regards,
Hasan Jafi -
How do I fix my computer after upgrading from 10.6.8 to 10.10.1? Safari quits responding constantly, my computer runs so slow it is virtually useless. I have an early 2008 iMac, 2.66gHz Intel 2 Duo Core, 2 G Mem. I got this report from EtreCheck
Problem description:
Downloaded “free upgrade” to Yosemite. I have to constantly force quit Safari, because it stops responding. All apps are now so slow as to make my machine virtually useless.
EtreCheck version: 2.1.8 (121)
Report generated March 9, 2015 at 4:31:04 PM MDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (20-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.66 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR2 SDRAM 800 MHz ok
BANK 1/DIMM1
1 GB DDR2 SDRAM 800 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1680 x 1050
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 0:37:17
Disk Information: ℹ️
ST3320820AS_Q disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
GrannysRide (disk0s2) / : 319.21 GB (228.32 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
LaCie P'9220 Mobile Drive 500.11 GB
disk1s1 (disk1s1) <not mounted> : 32 KB
Porsche (disk1s3) /Volumes/Porsche : 499.97 GB (370.04 GB free)
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Logitech USB Receiver
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.sierrawireless.driver.SierraSupport (1.4.0) [Click for support]
[not loaded] com.sierrawireless.driver.SierraSupportKicker (1.4.0) [Click for support]
/Volumes/Porsche/Applications/TechTool Deluxe.app
[not loaded] com.micromat.iokit.TTIOMIATADriver (1.2) [Click for support]
[not loaded] com.micromat.iokit.TTIOMIFWDriver (1.2) [Click for support]
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.hp.help.tocgenerator.plist [Click for support]
[running] com.hp.productresearch.plist [Click for support]
[running] com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.versioncueCS3.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.adobe.ARM.[...].plist [Click for support] [Click for details]
[failed] com.iYogi.MacTuneupHelper.plist [Click for support] [Click for details]
[failed] com.jdibackup.JustCloud.autostart.plist [Click for support] [Click for details]
User Login Items: ℹ️
Yahoo! Widgets Application (/Applications/Yahoo! Widgets.app)
Dropbox Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
GarminGPSControl: Version: 3.0.1.0 Release - SDK 10.4 [Click for support]
AdobePDFViewer: Version: 10.1.13 [Click for support]
Unity Web Player: Version: UnityPlayer version 2.6.1f3 [Click for support]
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
Scorch: Version: 5.2.5 [Click for support]
iPhotoPhotocast: Version: 7.0
RealPlayer Plugin: Version: Unknown [Click for support]
RL Secure Plug-In Layer: Version: Unknown - SDK 10.5 [Click for support]
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Yahoo! Installer 3: Version: 1.0.128 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
CouponPrinter-FireFox_v2: Version: Version 1.1.6 [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 [Click for support]
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
Move_Media_Player: Version: npmnqmp 071503000004 [Click for support]
UploadManager: Version: Unknown - SDK 10.5 [Click for support]
ContentManager: Version: Unknown - SDK 10.5 [Click for support]
RocketEngine: Version: Unknown - SDK 10.5 [Click for support]
Safari Extensions: ℹ️
1-ClickWeather
Exposer
Better Facebook
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS3 [Click for support]
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
GrannysRide: Disk size: 319.21 GB Disk used: 90.89 GB
Destinations:
Porsche [Local]
Total size: 499.97 GB
Total number of backups: 22
Oldest backup: 2014-12-24 19:07:22 +0000
Last backup: 2015-03-09 21:30:59 +0000
Size of backup disk: Adequate
Backup size 499.97 GB > (Disk used 90.89 GB X 3)
Top Processes by CPU: ℹ️
3% WindowServer
1% Safari
0% hidd
0% discoveryd
0% com.apple.WebKit.Networking
Top Processes by Memory: ℹ️
116 MB Safari
106 MB com.apple.WebKit.WebContent
101 MB mds_stores
34 MB WindowServer
30 MB com.apple.WebKit.Networking
Virtual Memory Information: ℹ️
57 MB Free RAM
741 MB Active RAM
701 MB Inactive RAM
297 MB Wired RAM
3.35 GB Page-ins
59 MB Page-outs
Diagnostics Information: ℹ️
Mar 9, 2015, 03:45:22 PM Self test - passed
Mar 9, 2015, 01:34:51 PM /Library/Logs/DiagnosticReports/Safari_2015-03-09-133451_[redacted].hang
Mar 9, 2015, 11:53:40 AM /Users/[redacted]/Library/Logs/DiagnosticReports/Spotlight_2015-03-09-115340_[r edacted].crash
Mar 9, 2015, 03:34:14 PM /Library/Logs/DiagnosticReports/Safari_2015-03-09-153414_[redacted].hangSlow performance after installing Yosemite on an older Mac is often caused by inadequate memory. Although you can install the upgrade on a Mac with 2 GB of memory, experience has shown that at least 4 GB is needed for full performance.
Select About This Mac from the Apple menu. If you have less than 4 GB of memory, and your model has upgradable memory, install as much as it can take, or at least that much. Any reputable RAM vendor will have a web form in which you can select the Mac model and be directed to compatible parts. -
Hi Pro,
When I tried to upgrade from 8.5.1 to 8.6.1, I got the following failure. Has anybody come across this?
The documentation only shows download the file with .pkg extension. What other files in the Unity Express Complete Installation File Set do I need to install?
Would you like to continue?[confirm]
Downloading ftp cue-vm-k9.SPA.sme.8.6.1.pkg
Bytes downloaded : 687017
Validating package signature ... done
Validating installed manifests ............complete.
- Parsing package manifest files... complete.
- Checking Package dependencies... complete.
Downloading ftp cue-vm-langpack.sme.8.6.1.pkg
Bytes downloaded : 3986036
Validating package signature ... done
- Parsing package manifest files... complete.
- Checking Package dependencies... complete.
- Checking Manifest dependencies for subsystems in the install candidate list...
- Checking Manifest dependencies for subsystems already installed...
Error: Required Subsystem ID e2497725-368d-48b5-a7d5-7f87d889a608 was not found either on Installed or Candidate list.
Thanks in advance.Hi take a look at this:
Symptom: Software upgrade of CUE fails with the following error message: Error: Required Subsystem ID e2497725-368d-48b5-a7d5-7f87d889a608 was not found either on Installed or Candidate list.
Conditions:
1) CUE was shipped from Cisco with version 7.0.1 or later.
2) One of the following upgrades is done:
•7.0.x -> 7.1.x
•7.1.x -> 8.0.x
•7.0.x -> 8.0.x.
Workaround: The workaround is to first remove a dummy subsystem using the following CLI command in exec mode, allow the system to reboot, and then do the upgrade: "software uninstall uid-list 26bd663c-3e5a-43d9-a6c3-5441ce44941b".
Gabriel. -
I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.
-
Is it really possible to upgrade from a Treo 650 to a Treo 750?
I am not a very happy customer at the moment, but any help would be greatly appreciated. I upgraded from my old Palm Tungsten to a Zire, then to a Cingular Treo 650, combining three devices into one. I have since discovered that the Treo 650 seems to have a faulty transmission mode, as I can rarely be clearly understood by whomever I call. Am on the second (or third, I have lost track) and continue to have the same problem. I get five bars of reception but can't be understood on the other end. A bit of a problem when one is trying to call 911. Am constantly told I am "breaking up". The repair shop says it "Can't duplicate the problem". OK, then I do not want to give up all the info I have stored in the fool thing, and the 750 seems to have a different system, so I thought I would try that. All the stuff I could find seemed to indicate it wouldn't be a problem to upgrade. When the 750 arrived, I tried to install the software from the CD on my Windows XP computer. No dice. Setup encounters an error and closes. Can't even look at the files, because setup tries to run any time I access the CD. From any drive. Gave it to my girlfiend to check on her computer, and the CD seemed to run fine. Other CDs work just fine on my computer. Must be some kind of conflict, but what? Tried calling the AT&T number that suggested they could help with setup, and was first connected to the business center, they routed me to the laptop center, who routed me to the network center, who said they would have to bring in the Palm customer service and connected me to a Mac guy that dumped me back to a menu that took me to someone for whom English is a second language with whom I was trying to communicate over a very poor satellite connection. They made no sense anyway. telling me first that I couldn't have two desktops running (wrong, my girlfriend has my old Zire and the CD worked fine) and then insisting that the serial number on my device had to start with a P, when it clearly does not have any alpha characters in it. Gave up on that route of assistance. Managed to get the new ActiveSync installed from my girlfriends computer over the network. Great. Now let's get my 650 synced with Outlook (which I have not used at home) and see if we can move on. Nope. First I have to update Outlook 2000 from the old Win98 to my current XP. Find the old CD, and square that away. OK, now sync to Outlook. Nope. The sync program gives an error, saying it will only sync with Outlook 98, 2000, and XP(2002). Good grief. I have Outlook 2000, and the software apparently does not recognize it. If the Palm doesn't work, there is no reason for me to keep this phone, and I am very close to returning it and abandoning the Palm entirely when I upgrade to something that works, although I dread re-entering all that information.
Post relates to: Treo 750 (AT&T)
This question was solved.
View Solution.Thanks for the feedback. Today I installed an Enterprise version of Office 2007 I purchased a while back, but had not yet installed. Microsoft presented a few challenges, but they were quickly resolved. I then downloaded the appropriate conduit from Palm, and synced the 650 with the handheld overwriting the computer. Then used Active Destop to sync the 750. Satisfied I had moved as much info as possible, I called AT&T and had them move the phone number to the new Treo.
Bonus! When the guy at AT&T called me on the new phone to verify it, he said it sounded better than my landline.
Sorry for the streaming paragraph. When it is late I tend to write like I think.
Dave
Post relates to: Treo 750 (AT&T) -
I upgraded from iPhone 3GS to iPhone 6. Everything converted fine. Yesterday I deleted an app in error. When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion. Can I go back and re-sync just one app from my old phone?
Try deleting what is called the iPod Photo Cache.
http://support.apple.com/kb/TS1314 -
I Have downloaded the upgrade from Mountain Lion to Yosemite. In thee process of so doing I have lost access to iTunes.
The app on desktop no longer opens the program and having downloaded and installed as per Apple instructions, can not make a connection.Hi, drjbuchanan.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/en-us/ts3430
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/en-us/ht2311
Cheers,
Jason H. -
Can't print from IE 8 after upgrading from Vista to Windows 7
My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff -
Fields in read-only mode for BP transaction in upgrade from 4.72 to ECC6.0
Hello,
This is regarding the query for BP transaction in upgrade from 4.72 to ECC 6.0.
While creating BP / Changing BP system is disabling the fields in compnay code & sales area option. There is a SAP not provided 907860; and specified that the proplem is because of the delta customizing.
All the customization settings are as per the note. And the Synchronization Control is also activated. But still the fields are disabled only.
I have checked the field settings also in Cross-Application-Components & Logistic-Genral.
But these are not working for compnay code & sales area data.
please let me know if anyone has faced this type of problem / found any solution on this.
Best Regards,
ShubhadaSAP IMG -> Cross Application Components -> Master Data Synchronization  Synchronization Control -> Synchronization Control -> Activate Synchronization options
This setting allows you to activate synchronization of BP with R/3. Not maintaining the values may result in certain fields being read-only in BP.
Suggested Values:
Source Object: BP | Target Object: CUSTOMER | Active Indicator : X
Source Object: BP | Target Object: VENDOR | Active Indicator : X
Source Object: CUSTOMER | Target Object: BP | Active Indicator : X
Source Object: VENDOR | Target Object: BP | Active Indicator : X
Have you set all of the above settings??
BHARATH -
Error in Access VBA Application when upgrading from Acrobat 8.0 to 9.0
Hello.
The company that I work for recently upgraded from Adobe Acrobat 8.0 to 9.0 and I`m experiencing some problems with my Access 2003 VBA Application that extracts text from PDF-files and insert it into a table. I have tried adding references to Adobe 9.0 Type Library, but still no luck. Anyone having any ideas for a workaround? See attatched image for error-message. Any help will be greatly appreciated!
Regards,
SteffanPublic Function lesPDF()
'On Error Resume Next
Dim MyDB As Database, EplanSet As DAO.Recordset, ResultSet As DAO.Recordset, SideSet As DAO.Recordset, TekstSet As DAO.Recordset
Dim AcroApp As CAcroApp
Dim AcroAVDoc As CAcroAVDoc
Dim AcroPDDoc As CAcroPDDoc
Dim AcroHiliteList As CAcroHiliteList
Dim AcroTextSelect As CAcroPDTextSelect
Dim PageNumber, PageContent, i, j
Dim Ferdig As Boolean
Dim StartPos, Length As Double
Dim PartSyntax() As String
Dim DocType() As String
Dim Content, strFileName, Temp As String
Dim k, Lengde As Integer
Plant = Form_Autoexec.cmbPlant.Value
Set AcroApp = CreateObject("AcroExch.App")
Set AcroAVDoc = CreateObject("AcroExch.AVDoc")
Set MyDB = DBEngine.Workspaces(0).Databases(0)
EplanSet.MoveLast
EplanSet.MoveFirst
Do Until EplanSet.EOF
strFileName = EplanSet!path & EplanSet!File
If AcroAVDoc.Open(strFileName, vbNull) <> True Then
Exit Function
End If
Set AcroAVDoc = AcroApp.GetActiveDoc
Set AcroPDDoc = AcroAVDoc.GetPDDoc
Here is some of the code, where the program stops is marked in red. This worked perfectly with Adobe 8.0. Thaks for any help or suggestions! -
Upgrade from R/3 4.6C to ECC 6.00 : languages
Hi,
We're trying to upgrade from SAP R/3 4.6C to ECC 6.00 under NT environment, having Oracle as database. During the preparation phase, we got the following error, and in our current SAP system R/3 we have 2 additional languages NL and FR (EN and DE are already in), can you please explain why this phase is blocking in this step, and if I continue I've to do a full language import, thanks in advance.
The following language(s) could not be updated yet:
- French for component EA-APPL
- French for component EA-DFPS
- French for component EA-FINSERV
- French for component EA-GLTRADE
- French for component EA-HR
- French for component EA-IPPE
- French for component EA-PS
- French for component EA-RETAIL
- French for component ECC-DIMP
- French for component ERECRUIT
- French for component FI-CA
- French for component FI-CAX
- French for component FINBASIS
- French for component INSURANCE
- French for component IS-CWM
- French for component IS-H
- French for component IS-M
- French for component IS-OIL
- French for component IS-PS-CA
- French for component IS-UT
- French for component LSOFE
- French for component PI_BASIS
- French for component SAP_ABA
- French for component SAP_AP
- French for component SAP_APPL
- French for component SAP_BASIS
- French for component SAP_BW
- French for component SAP_HR
- French for component SEM-BW
- French for component ST-PI
- Dutch for component EA-APPL
- Dutch for component EA-DFPS
- Dutch for component EA-FINSERV
- Dutch for component EA-GLTRADE
- Dutch for component EA-HR
- Dutch for component EA-IPPE
- Dutch for component EA-PS
- Dutch for component EA-RETAIL
- Dutch for component ECC-DIMP
- Dutch for component ERECRUIT
- Dutch for component FI-CA
- Dutch for component FI-CAX
- Dutch for component FINBASIS
- Dutch for component INSURANCE
- Dutch for component IS-CWM
- Dutch for component IS-H
- Dutch for component IS-M
- Dutch for component IS-OIL
- Dutch for component IS-PS-CA
- Dutch for component IS-UT
- Dutch for component LSOFE
- Dutch for component PI_BASIS
- Dutch for component SAP_ABA
- Dutch for component SAP_AP
- Dutch for component SAP_APPL
- Dutch for component SAP_BASIS
- Dutch for component SAP_BW
- Dutch for component SAP_HR
- Dutch for component SEM-BW
- Dutch for component ST-PI
Please mount another Language Disk for these language(s).
If you do not have further Language Disk(s), you may
continue, but the languages mentioned above will be lost
after the upgrade. A full language import has to be
performed after the upgrade to reinstall the language(s).
? continue
? cancelHi Markus,
I've introduce the following information:
> MOUNT POINT 07 = S:\export\Data\CDLAN2
> MOUNT POINT 01 = S:\export\Data\KN_WINDOWS_X86_64_AUPG
> MOUNT POINT 06 = S:\export\Data\CDLAN1
> MOUNT POINT 05 = S:\export\Data\CD3
> MOUNT POINT 03 = S:\export\Data\CD1
> MOUNT POINT 08 = S:\export\Data\UMN_WINDOWS_X86_64
> MOUNT POINT 02 = S:\export\Data\KN_WINDOWS_X86_64
> MOUNT POINT 04 = S:\export\Data\CD2
And in mount point 06/07 we have the languages.
The content of the trace file is:
here's the complete trace:
2007/07/05 16:35:01 *****************************
2007/07/05 16:35:01 Checking directories ...
2007/07/05 16:35:01 Searching for Data Carrier labeled AOXUPGR
Adding path: S:\export\Data\KN_WINDOWS_X86_64_AUPG
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64_AUPG ... no matching label
Adding path: S:\export\Data\KN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64 ... no matching label
Adding path: S:\export\Data\CD1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD1
Adding path: S:\export\Data\CD1\UPG1
Adding path: S:\export\Data\CD1\UPG2
Adding path: S:\export\Data\CD1\UPG3
Adding path: S:\export\Data\CD1\UPG4
Adding path: S:\export\Data\CD1\UPG5
Adding path: S:\export\Data\CD1\UPG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG4 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG6 ... no matching label
Adding path: S:\export\Data\CD2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD2
Adding path: S:\export\Data\CD2\UPG7
Adding path: S:\export\Data\CD2\UPG8
Adding path: S:\export\Data\CD2\UPG9
Adding path: S:\export\Data\CD2\UPG10
Adding path: S:\export\Data\CD2\UPG11
Adding path: S:\export\Data\CD2\UPG12
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG7 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG8 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG9 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG10 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG11 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG12 ... no matching label
Adding path: S:\export\Data\CD3
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD3
Adding path: S:\export\Data\CD3\UPG13
Adding path: S:\export\Data\CD3\UPG14
Adding path: S:\export\Data\CD3\UPG15
Adding path: S:\export\Data\CD3\UPG16
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD3 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG13 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG14 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG15 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG16 ... no matching label
Adding path: S:\export\Data\CDLAN1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN1
Adding path: S:\export\Data\CDLAN1\LANG1
Adding path: S:\export\Data\CDLAN1\LANG2
Adding path: S:\export\Data\CDLAN1\LANG3
Adding path: S:\export\Data\CDLAN1\LANG4
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG4 ... no matching label
Adding path: S:\export\Data\CDLAN2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN2
Adding path: S:\export\Data\CDLAN2\LANG5
Adding path: S:\export\Data\CDLAN2\LANG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG6 ... no matching label
Adding path: S:\export\Data\UMN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\UMN_WINDOWS_X86_64 ... no matching label
Regards,
A.Kamel -
I've recently completed a database upgrade from 10.2.0.3 to 11.2.0.1 using the DBUA.
I've since encountered a slowdown when running a script which drops and recreates a series of ~250 tables. The script normally runs in around 19 seconds. After the upgrade, the script requires ~2 minutes to run.
By chance has anyone encountered something similar?
The problem may be related to the behavior of an "after CREATE on schema" trigger which grants select privileges to a role through the use of a dbms_job call; between 10g and the database that was upgraded from 10G to 11g. Currently researching this angle.
I will be using the following table creation DDL for this abbreviated test case:
create table ALLIANCE (
ALLIANCEID NUMBER(10) not null,
NAME VARCHAR2(40) not null,
CREATION_DATE DATE,
constraint PK_ALLIANCE primary key (ALLIANCEID)
using index
tablespace LIVE_INDEX
tablespace LIVE_DATA;When calling the above DDL, an "after CREATE on schema" trigger is fired which schedules a job to immediately run to grant select privilege to a role for the table which was just created:
create or replace
trigger select_grant
after CREATE on schema
declare
l_str varchar2(255);
l_job number;
begin
if ( ora_dict_obj_type = 'TABLE' ) then
l_str := 'execute immediate "grant select on ' ||
ora_dict_obj_name ||
' to select_role";';
dbms_job.submit( l_job, replace(l_str,'"','''') );
end if;
end;
{code}
Below I've included data on two separate test runs. The first is on the upgraded database and includes optimizer parameters and an abbreviated TKPROF. I've also, included the offending sys generate SQL which is not issued when the same test is run on a 10g environment that has been set up with a similar test case. The 10g test run's TKPROF is also included below.
The version of the database is 11.2.0.1.
These are the parameters relevant to the optimizer for the test run on the upgraded 11g SID:
{code}
SQL> show parameter optimizer
NAME TYPE VALUE
optimizer_capture_sql_plan_baselines boolean FALSE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 11.2.0.1
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
optimizer_use_invisible_indexes boolean FALSE
optimizer_use_pending_statistics boolean FALSE
optimizer_use_sql_plan_baselines boolean TRUE
SQL> show parameter db_file_multi
NAME TYPE VALUE
db_file_multiblock_read_count integer 8
SQL> show parameter db_block_size
NAME TYPE VALUE
db_block_size integer 8192
SQL> show parameter cursor_sharing
NAME TYPE VALUE
cursor_sharing string EXACT
SQL> column sname format a20
SQL> column pname format a20
SQL> column pval2 format a20
SQL> select sname, pname, pval1, pval2 from sys.aux_stats$;
SNAME PNAME PVAL1 PVAL2
SYSSTATS_INFO STATUS COMPLETED
SYSSTATS_INFO DSTART 03-11-2010 16:33
SYSSTATS_INFO DSTOP 03-11-2010 17:03
SYSSTATS_INFO FLAGS 0
SYSSTATS_MAIN CPUSPEEDNW 713.978495
SYSSTATS_MAIN IOSEEKTIM 10
SYSSTATS_MAIN IOTFRSPEED 4096
SYSSTATS_MAIN SREADTIM 1565.746
SYSSTATS_MAIN MREADTIM
SYSSTATS_MAIN CPUSPEED 2310
SYSSTATS_MAIN MBRC
SYSSTATS_MAIN MAXTHR
SYSSTATS_MAIN SLAVETHR
13 rows selected.
{code}
Output from TKPROF on the 11g SID:
{code}
create table ALLIANCE (
ALLIANCEID NUMBER(10) not null,
NAME VARCHAR2(40) not null,
CREATION_DATE DATE,
constraint PK_ALLIANCE primary key (ALLIANCEID)
using index
tablespace LIVE_INDEX
tablespace LIVE_DATA
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 4 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 0 4 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 324
{code}
... large section omitted ...
Here is the performance hit portion of the TKPROF on the 11g SID:
{code}
SQL ID: fsbqktj5vw6n9
Plan Hash: 1443566277
select next_run_date, obj#, run_job, sch_job
from
(select decode(bitand(a.flags, 16384), 0, a.next_run_date,
a.last_enabled_time) next_run_date, a.obj# obj#,
decode(bitand(a.flags, 16384), 0, 0, 1) run_job, a.sch_job sch_job from
(select p.obj# obj#, p.flags flags, p.next_run_date next_run_date,
p.job_status job_status, p.class_oid class_oid, p.last_enabled_time
last_enabled_time, p.instance_id instance_id, 1 sch_job from
sys.scheduler$_job p where bitand(p.job_status, 3) = 1 and
((bitand(p.flags, 134217728 + 268435456) = 0) or
(bitand(p.job_status, 1024) <> 0)) and bitand(p.flags, 4096) = 0 and
p.instance_id is NULL and (p.class_oid is null or (p.class_oid is
not null and p.class_oid in (select b.obj# from sys.scheduler$_class b
where b.affinity is null))) UNION ALL select
q.obj#, q.flags, q.next_run_date, q.job_status, q.class_oid,
q.last_enabled_time, q.instance_id, 1 from sys.scheduler$_lightweight_job
q where bitand(q.job_status, 3) = 1 and ((bitand(q.flags, 134217728 +
268435456) = 0) or (bitand(q.job_status, 1024) <> 0)) and
bitand(q.flags, 4096) = 0 and q.instance_id is NULL and (q.class_oid
is null or (q.class_oid is not null and q.class_oid in (select
c.obj# from sys.scheduler$_class c where
c.affinity is null))) UNION ALL select j.job, 0,
from_tz(cast(j.next_date as timestamp), to_char(systimestamp,'TZH:TZM')
), 1, NULL, from_tz(cast(j.next_date as timestamp),
to_char(systimestamp,'TZH:TZM')), NULL, 0 from sys.job$ j where
(j.field1 is null or j.field1 = 0) and j.this_date is null) a order by
1) where rownum = 1
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.47 0.47 0 9384 0 1
total 3 0.48 0.48 0 9384 0 1
Misses in library cache during parse: 1
Optimizer mode: CHOOSE
Parsing user id: SYS (recursive depth: 1)
Rows Row Source Operation
1 COUNT STOPKEY (cr=9384 pr=0 pw=0 time=0 us)
1 VIEW (cr=9384 pr=0 pw=0 time=0 us cost=5344 size=6615380 card=194570)
1 SORT ORDER BY STOPKEY (cr=9384 pr=0 pw=0 time=0 us cost=5344 size=11479630 card=194570)
194790 VIEW (cr=9384 pr=0 pw=0 time=537269 us cost=2563 size=11479630 card=194570)
194790 UNION-ALL (cr=9384 pr=0 pw=0 time=439235 us)
231 FILTER (cr=68 pr=0 pw=0 time=920 us)
231 TABLE ACCESS FULL SCHEDULER$_JOB (cr=66 pr=0 pw=0 time=690 us cost=19 size=13157 card=223)
1 TABLE ACCESS BY INDEX ROWID SCHEDULER$_CLASS (cr=2 pr=0 pw=0 time=0 us cost=1 size=40 card=1)
1 INDEX UNIQUE SCAN SCHEDULER$_CLASS_PK (cr=1 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 5056)
0 FILTER (cr=3 pr=0 pw=0 time=0 us)
0 TABLE ACCESS FULL SCHEDULER$_LIGHTWEIGHT_JOB (cr=3 pr=0 pw=0 time=0 us cost=2 size=95 card=1)
0 TABLE ACCESS BY INDEX ROWID SCHEDULER$_CLASS (cr=0 pr=0 pw=0 time=0 us cost=1 size=40 card=1)
0 INDEX UNIQUE SCAN SCHEDULER$_CLASS_PK (cr=0 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 5056)
194559 TABLE ACCESS FULL JOB$ (cr=9313 pr=0 pw=0 time=167294 us cost=2542 size=2529254 card=194558)
{code}
and the totals at the end of the TKPROF on the 11g SID:
{code}
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 2 0.00 0.00 0 0 4 0
Fetch 0 0.00 0.00 0 0 0 0
total 3 0.00 0.00 0 0 4 0
Misses in library cache during parse: 1
Misses in library cache during execute: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 70 0.00 0.00 0 0 0 0
Execute 85 0.01 0.01 0 62 208 37
Fetch 49 0.48 0.49 0 9490 0 35
total 204 0.51 0.51 0 9552 208 72
Misses in library cache during parse: 5
Misses in library cache during execute: 3
35 user SQL statements in session.
53 internal SQL statements in session.
88 SQL statements in session.
Trace file: 11gSID_ora_17721.trc
Trace file compatibility: 11.1.0.7
Sort options: default
1 session in tracefile.
35 user SQL statements in trace file.
53 internal SQL statements in trace file.
88 SQL statements in trace file.
51 unique SQL statements in trace file.
1590 lines in trace file.
18 elapsed seconds in trace file.
{code}
The version of the database is 10.2.0.3.0.
These are the parameters relevant to the optimizer for the test run on the 10g SID:
{code}
SQL> show parameter optimizer
NAME TYPE VALUE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.3
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
SQL> show parameter db_file_multi
NAME TYPE VALUE
db_file_multiblock_read_count integer 8
SQL> show parameter db_block_size
NAME TYPE VALUE
db_block_size integer 8192
SQL> show parameter cursor_sharing
NAME TYPE VALUE
cursor_sharing string EXACT
SQL> column sname format a20
SQL> column pname format a20
SQL> column pval2 format a20
SQL> select sname, pname, pval1, pval2 from sys.aux_stats$;
SNAME PNAME PVAL1 PVAL2
SYSSTATS_INFO STATUS COMPLETED
SYSSTATS_INFO DSTART 09-24-2007 11:09
SYSSTATS_INFO DSTOP 09-24-2007 11:09
SYSSTATS_INFO FLAGS 1
SYSSTATS_MAIN CPUSPEEDNW 2110.16949
SYSSTATS_MAIN IOSEEKTIM 10
SYSSTATS_MAIN IOTFRSPEED 4096
SYSSTATS_MAIN SREADTIM
SYSSTATS_MAIN MREADTIM
SYSSTATS_MAIN CPUSPEED
SYSSTATS_MAIN MBRC
SYSSTATS_MAIN MAXTHR
SYSSTATS_MAIN SLAVETHR
13 rows selected.
{code}
Now for the TKPROF of a mirrored test environment running on a 10G SID:
{code}
create table ALLIANCE (
ALLIANCEID NUMBER(10) not null,
NAME VARCHAR2(40) not null,
CREATION_DATE DATE,
constraint PK_ALLIANCE primary key (ALLIANCEID)
using index
tablespace LIVE_INDEX
tablespace LIVE_DATA
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.01 0 2 16 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.01 0.01 0 2 16 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 113
{code}
... large section omitted ...
Totals for the TKPROF on the 10g SID:
{code}
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 1 0.00 0.02 0 0 0 0
Execute 1 0.00 0.00 0 2 16 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.02 0 2 16 0
Misses in library cache during parse: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 65 0.01 0.01 0 1 32 0
Execute 84 0.04 0.09 20 90 272 35
Fetch 88 0.00 0.10 30 281 0 64
total 237 0.07 0.21 50 372 304 99
Misses in library cache during parse: 38
Misses in library cache during execute: 32
10 user SQL statements in session.
76 internal SQL statements in session.
86 SQL statements in session.
Trace file: 10gSID_ora_32003.trc
Trace file compatibility: 10.01.00
Sort options: default
1 session in tracefile.
10 user SQL statements in trace file.
76 internal SQL statements in trace file.
86 SQL statements in trace file.
43 unique SQL statements in trace file.
949 lines in trace file.
0 elapsed seconds in trace file.
{code}
Edited by: user8598842 on Mar 11, 2010 5:08 PMSo while this certainly isn't the most elegant of solutions, and most assuredly isn't in the realm of supported by Oracle...
I've used the DBMS_IJOB.DROP_USER_JOBS('username'); package to remove the 194558 orphaned job entries from the job$ table. Don't ask, I've no clue how they all got there; but I've prepared some evil looks to unleash upon certain developers tomorrow morning.
Not being able to reorganize the JOB$ table to free the now wasted ~67MB of space I've opted to create a new index on the JOB$ table to sidestep the full table scan.
CREATE INDEX SYS.JOB_F1_THIS_NEXT ON SYS.JOB$ (FIELD1, THIS_DATE, NEXT_DATE) TABLESPACE SYSTEM;The next option would be to try to find a way to grant the select privilege to the role without using the aforementioned "after CREATE on schema" trigger and dbms_job call. This method was adopted to cover situations in which a developer manually added a table directly to the database rather than using the provided scripts to recreate their test environment.
I assume that the following quote from the 11gR2 documentation is mistaken, and there is no such beast as "create or replace table" in 11g:
http://download.oracle.com/docs/cd/E11882_01/server.112/e10592/statements_9003.htm#i2061306
"Dropping a table invalidates dependent objects and removes object privileges on the table. If you want to re-create the table, then you must regrant object privileges on the table, re-create the indexes, integrity constraints, and triggers for the table, and respecify its storage parameters. Truncating and replacing have none of these effects. Therefore, removing rows with the TRUNCATE statement or replacing the table with a *CREATE OR REPLACE TABLE* statement can be more efficient than dropping and re-creating a table." -
Hi Microsoft,
Since we have upgraded from Exchange 2007 to 2013 users complain their conversations in Outlook are no longer grouped based on the subject of an e-mail. I looks like Outlook uses other message properties for grouping e-mails in a conversation.
I have investigated all the forum topics and see that with exchange 2010 there is support added for the use of conversation-ID's. However the functionality to automatically group e-mails with the same subject in one conversation in Outlook is gone!
I would like to know if there is a fix to implement so that some our users get this functionality back. For Example: Let the exchange server not generate conversation-ID's and message-ID's for certain users.
Your help is greatly appreciated!Totally correct!
If you don't plan to maintain Outlook then you plan to fail :(
Additional links etc are in here:
http://blogs.technet.com/b/rmilne/archive/2013/07/18/patching-exchange-don-t-overlook-outlook.aspx
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
Facebook:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Maybe you are looking for
-
Query: Authentication Error while consuming a web service
Hi All, I've generted a WSDL file by using the following steps. 1.Created a RFC enabled ABAP pgm 2.Created a web service out of it (using webservice creation wizard - default virtual host. so my port is 8100)3.Released the web service (WSCONFIG) 4.Ge
-
I can't install windows 7 in bootcamp on mac mini 2011
I have a 2011 Mac mini (no optical drive). I have a brand new Samsung external DVD drive conntected via USB. I put the Windows 7 DVD (64-bit) in the external drive and the Windows support software is on a USB stick that is in a USB port. I partition
-
Adobe Photoshop CS5 crash/won't start on my XP computer.
Hi I have installed Photoshop CS5 on a coupel of comupters(XP) and I get following error when I start it. The user are useing mandatory porfiles NTUSER.MAN. AppName:photoshop.exe AppVer: 12.0.1.0 ModName:scriptingsupport.8li ModVer:10.0.0.0 O
-
I have purchased some app's like Whatsapp, Flashlight and more from App Store and after about 3 days of usage, all refuse to open up. I have received acknowledgement of payment via email. What should I do to reinstate them?
-
HI I am making a query in which I am using a variable 'Zfiscper' in calcualting a formula variable. but while running , it displays an error message - 'zfiscper' not BEing used in query. Can ne one tell y this msg is comin??