CUEAC - Parked Calls not Reverting to Operator

I have a customer with a CUEAC 9.x installation and they are able to park calls and transfer calls mostly without issue, however, when the operator parks calls, and the call is not picked up, the call is not reverting to the operator. The call stays parked indefinitely. The timers are set for 90 seconds, but they appear to be ignored.
Does anyone have any idea what factors might be interfering with the reversion (CUEAC refers to the feature as "recall")?

Hi Christopher,
Did it work fine earlier?
Are you not seeing the parked call alert in the 'Calls in progress' tab after 90 seconds.
have you tried resetting the CTI ports or doing a sync from cueac server?
HTH
Manish

Similar Messages

Mercedes User interface does not revert back after a call

I had my iPhone 4 paired to my Mercedes and was happily using the bluetooth connectivity for making and receiving calls .
But lately when I make a call by dialing from my phone and then disconnecting the call using the car control, the car screen does not revert back to what it was and it remains in the phone mode.
This does not happen when I pick up a call using the car control.
Any idea as to why this might be happening .

Uninstall then reinstall RNR. RNR does not like to be cancelled via task manager.... this creates a mess.
Reinstall may also fix your issue with productivity center..

My iphone will not revert back from silent mode. It will play when i am scrolling through ringtones but when a text or incoming call comes in all it does is vibrate. Anyone having this issue??

My Iphone will not revert back from silent mode. It will play when i am scrolling through ringtones but when a text or incoming call comes in it just vibrates. Anyone having this issue??

I have the same problem with my iPhone 5c after update to iOS 8 every time i have to restart my phone to solve the silent issue

Why i can't make a normal video call over my cellular operator using by iphone 4s ????!!!! is it possible that if my mobile is iphone so i can not contact (Video Call - or Send Files over Bluetooth ) people do not have iphone ??????!!!!!!!!!

why i can't make a normal video call over my cellular operator using by iphone 4s ????!!!!
is it possible that if my mobile is iphone so i can not contact (Video Call - or Send Files over Bluetooth ) people do not have iphone ??????!!!!!!!!!
i'm still looking for solution, but if i there is no solution so i will throw My Own iPhone 4S in the nearest Trash.
(I had got a big problem and thanks for Nokia saved me. and if i don't care about apple products i will never send to you this, so kindly find solution or people in middle east will stop using iphone)

No clue why you cannot make video calls over your cellular operator... have you tried contacting them?
If you're referring to FaceTime, it is currently limited to Wi-Fi only.
Sending files via Bluetooth is not a supported feature of the iPhone or iOS. A simple search of the web or these forums would have made that abundantly clear.
Threatening to throw away valuable items in these forums only serves to make you look less than intelligent. No one here is an Apple employee, we are all users like yourself. As such, we could care less what you do. If you choose to be stupid, that's up to you.
Educate yourself and stop whining.

HT4962 i just got my ipod touch back from a now ex-friend and everything was erased. i mean everything... not even an operating system (or whatever its called) how can i make it useable again?

i just got my ipod touch back from a now ex-friend and everything was erased. i mean everything... not even an operating system (or whatever its called) how can i make it useable again?

Connect the iPod to your computer and restore via iTunes.
iTunes: Backing up, updating, and restoring iOS software

Operation number not holding in Operation details screen for WM6.2

Hi Experts,
I have added custom statuses to operation object in WM6.2. When I am editing the operation,Operation number is displaying in operation details screen header.But when trying to execute custom statuses, the operation number is not holding in Operation tile view header as in the below screen snap.
Thanks in advance.Kindly suggest.
Thanks & Regards,
Sravanthi Polu

Hi sravanthi,
Just make sure that when you are editing operation object for custom statuses change you are editing same object that you are seeing in operation details screen.
I think this problem is due to different/stale operation object that is being edited for when you are calling Operation Edit Transaction for change status for (custom statuses).
I recommend to check your Target for Button , Action and Edit Transaction for this (is it same operation object that is being seen on detail screen/being edited for).
Regards,
AK

How can I transfer my Skype to free call, not cred...

How can I transfer my skype to free call not cridet
Enquiry transferred to create new topic;
subject/title edited accordingly.

Hi, HanaDabbas, and welcome to the Community,
Calls between Skype users are always free of any charge; if your calls require credit (or ask for a subscription), this means you are placing calls to fixed or land lines or mobile numbers, which require credit or a subscription to pay for the call charges.
You do not need to "change" your account; simply add those to whom you wish to call to your Skype contacts list. They will need to create their own Skype accounts in order to do this. More details here: https://support.skype.com/en/faq/FA10935/calling-someone-who-s-on-skype-windows-desktop This FAQ article is customized for several other operating systems and mobile platforms.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

ERROR :SCRIPT7002: XMLHttpRequest: Network Error 0x2efd, Could not complete the operation due to error 00002efd. File: default.html

Hi ,all
I am beginner for windows 8 app development.
I created simple project on domain name called www.aaa.com and also hosted web services on same domain. at that time i was able to access web services on my application code using AJAX. Then i created same project on another domain called www.bbb.com then
i tried to access wcf services from www.aaa.com domain. at that time my javaScript console is throwing this error "SCRIPT7002: XMLHttpRequest: Network Error 0x2efd, Could not complete the operation due to error 00002efd.
File: default.html". I tried some thing on both end on web services project as well as windows 8 app.
AT app side in package.appxmanifest file i added below code.
<Capabilities>
    <Capability Name="privateNetworkClientServer" />
    <Capability Name="internetClient" />
</Capabilities>
AT web services side in web.config file i added following settings.
<serviceHostingEnvironment aspNetCompatibilityEnabled="true"
        multipleSiteBindingsEnabled="true" />
    <standardEndpoints>
      <webScriptEndpoint>
        <standardEndpoint name="" crossDomainScriptAccessEnabled="true" />
      </webScriptEndpoint>
    </standardEndpoints>
but above all diagnostics are not working for me.
and one more thing at www.bbb.com domain in sample android app while i am trying to consume my wcf services it is working fine. the problem is specifically for windows 8 app only.
Here is sample code which i had written in default.html file
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8" />
<title>DemoWebService</title>

<script src="/js/default.js"></script>
<script>
var personNameVar = "Hardik";
var dataIn = '{' + '"personName":"' + personNameVar + '"}';
$.ajax({
url: "http://SomeIP:SomePort/Service1.svc/HelloWorld",
type: "POST",
contentType: "application/json; charset=utf-8",
data: dataIn,
dataType: "json",
success: function (data) {
var object = JSON.parse(data.d);
if (object.Error == '') {
$('body').html(object.Response);
error: function (error) {
$('body').html(error);
</script>
</head>
<body>
</body>
</html>
so is there any help. I am eagerly waiting for it.
P.S I am accessing www.aaa.com web services using VPN.
Thanks in advance,
Hardik

In that case, I recommend that you collect a Network trace using a tool such as Microsoft Network Monitor or Wireshark to understand what IP Address is the connection being made to. The 0x2efd error correlates to the WinINet error: ERROR_INTERNET_CANNOT_CONNECT
meaning that the connection with the remote server cannot be established. When you collect a network trace, try looking for the TCP-SYN signal and see whether your remote server responds with a SYN-ACK.
Windows Store Developer Solutions, follow us on Twitter:
@WSDevSol|| Want more solutions? See our blog

Could not Complete the operation.

>Could not complete this operation. An
>unknown operating system error has
>occurred.
This error presents itself when I click "Save" in the Save for Web dialog.
I've trashed prefs for PS and SFW.
Repaired permissions
Booted from another drive and repaired disk.
Any ideas?

This is the Console log...
4/7/11 8:10:12 PM [0x0-0x9d09d].com.adobe.Photoshop[3822] ScriptUI: 3[0]: 0.901013 (FlexServer performance info) 0.200 seconds for server SWF to initialize
4/7/11 8:10:13 PM [0x0-0x9d09d].com.adobe.Photoshop[3822] ScriptUI: 6[0]: 0.952464 (FlexServer performance info) 0.050 seconds to load /Applications/Adobe%20Photoshop%20CS5/Plug-ins/Extensions/ScriptingSupport.plugin/Content s/Resources/ScriptUIFlexPhotoshop.swf
4/7/11 8:10:26 PM mdworker[2846] CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
4/7/11 8:10:28 PM [0x0-0x9d09d].com.adobe.Photoshop[3822] 2011-04-07 20:10:28 : INFO PlugPlugTerminate called
4/7/11 8:10:28 PM [0x0-0x9d09d].com.adobe.Photoshop[3822] 2011-04-07 20:10:28 : ERROR PlugPlugTerminate: PlugPlugErrorCode_internalError (PlugPlugRegisterCallbacks and PlugPlugSetup must be called first)
4/7/11 8:10:28 PM [0x0-0x9d09d].com.adobe.Photoshop[3822] 2011-04-07 20:10:28 : INFO Return value for PlugPlugTerminate: PlugPlugErrorCode_internalError
ANY help is appreciated!

Adobe Fourms does not work with Opera too well

Adobe Fourms does not work with Opera too well. I have to use in Opera "Identify as Firefox just to post this message!
I also have run into the same junk with Hotmail.
Web Design Tip: Always code for Opera and all other browsers will fall in line most of the time.

dave milbut wrote:
of course you're right east texas. hadn't noticed that. bad bad adobe. someone smack them with a rolled up news paper on the snout!
I've installed a button in my Firefox tool bar to toggle iFrames on and off through a Firefox add-on called "Toolbar Buttons".
The forum Reply Editor does not work when iFrames are blocked, so I need to toggle them back on when posting, then back off. I imagine that's better than having them on all the time.
Message was edited by: Ramón G Castañeda

Avoid procedure or function calls between a SQL operation and an implicit cursor test

when i analyse this code with code expert

atpidgeon wrote:
when i analyse this code with code expert
                        UPDATE P_PM_CONTROL_COUNT
                        SET AVAIL_SEG = AVAIL_SEG -1,
                            ALLOCATION = ALLOCATION -1
                        WHERE PM_UNIT_TYPE_ID = vrectab(1)
                        AND USAGE_DATE = vrectab(2)
                        AND SEGMENT_CODE = vrectab(5)
                        AND ALLOCATION - UNITS_RESERVED > 0;
                        IF sql%rowcount = 0 then --Added block and exception to prevent invetory going negative when placing multi units in same unit type out of service.
                            vErrMsg := 'Could not process your out of service request because your selection for unit '|| vrectab(3) || ' at ' || pvPropertyId || ' for ' || vrectab(2) || ' would cause segment ' || vrectab(5) || ' to be over allocated.';
                            RAISE SegOverAllocated;
                        END IF;
i get "Avoid procedure or function calls between a SQL operation and an implicit cursor test.",as far has i know
iff you're doing a sql%rowcount    after an update.. trying to see how many rows were updated... you dont want procedure or function calls between the update and the sql% line
correct me if im wrong and how would i fix it?or maybe i shouldnt
You correct it by NOT executing function calls as part of the UPDATE statement.
1. Issue the function calls BEFORE the update statement
2. save the function results into variables
3. use those variables in the UPDATE statement.
v_rectab1 := vrectab(1);
v_rectab2 := vrectab(21);
v_rectab5 := vrectab(5);
UPDATE P_PM_CONTROL_COUNT
                        SET AVAIL_SEG = AVAIL_SEG -1,
                            ALLOCATION = ALLOCATION -1
                        WHERE PM_UNIT_TYPE_ID = v_rectab1
                        AND USAGE_DATE = v_rectab2
                        AND SEGMENT_CODE = v_rectab5
                        AND ALLOCATION - UNITS_RESERVED > 0;

Calling not working

I continuously try calling and getting called by my friends who live across the state, only to have the call not work for me. I don't get any ringing or the pop-up window, it just shows me that they are in a call. When I do try to join, it sits there for approximately 30 seconds trying to connect and then kicks me out of the call. I have reset Skype, I have checked for updates; I have the most recent one, I'm up to date. They all have no problem calling with each other but I cannot join or make calls. Oddly enough, there is only one person I can call or get calls from out of our group, but I don't receive a notification unless it's from her. I have tried calling echo and it works every time but not with my friends. Please send help or something to try to fix this problem, it is making Skype unuseable.

Glad we found a workaround. On which network and in which country are you roaming? And who is your home network operator?
This would help Nokia to investigate. And it helps those to find the workaround who find this thread via an search on the Internet.

N8 outgoing calls NOT ALLOWED

Hello,
I have a problem, not always but sometimes when I unlock keypad on my phone /Iam using a password lock/ and I try to make a call it says NOT ALLOWED. The incoming calls works without problem only the outgoing calls are NOT ALLOWED. After switching off and on its working. Any solutions about this? Thanks a lot-

Hi cryoy,
Are you able to send and receive SMS messages with no problem? If so, could you also put your SIM into another phone just to check that it is not your SIM/operator dropping out.
Report back here.
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Error: BACKUP A:.Trashes (current privileges do not allow this operation)?

I recently purchased a Western Digital Elements external USB hard drive, 1TB capacity. I bought this as a backup HD and figured it would be plug-and-play. I’ve owned several external HDs without issues; in fact I own a WD MyBook external drive that is a few years old which has been flawless.
In order to set the HD up for the Mac platform, I followed instructions. I plugged it in and ran Disk Utility to format it. Settings for the formatting are Mac OS Extended (journaled), with Apple Partition Map selected. I set it for one partition.
Everything apparently formats fine. I named the WD Elements HD ‘BACKUP A’. Unfortunately, when I go to run my backup program ‘_Synchronize! Pro X_,’ I cannot do a routine backup! I’ve never had any problems with this backup software, ever, including usage with several external discs (including WD external disks).
Now, when I hit click on the button in _Synchronize! Pro X_ to initiate the backup, I get an error message: ‘BACKUP A:.Trashes (current privileges do not allow this operation)’ and the program stops the operation. I can't resolve the problem. I am not performing a boot-able backup, just a regular backup.
I tried reformatting the WD hard drive several times and I get the same message.
I called Western Digital’s tech service and they also wanted me to reformat and still I get the same error message. Then they had me do it all over, this time connected to my laptop (iBook G4), but nothing changed. WD said they didn't understand the error message: after their technicians failed to get the drive to work w/my backup software, they declared the drive defective and I was sent out another brand new drive (from DELL). I just formatted the new replacement drive for my G5 and when I ran Synchronize! Pro X, I get the same error message! I reformatted this replacement drive but still it makes no difference. Gah!
I am at wits end. I searched the web but can’t find anything. I need to backup my data ASAP and resolve this issue.
Anyone have any suggestions?
Thanks a bunch!!

Another detail from SPX's log:
10/29/10 5:42 PM Starting backup for "Untitled 2".
Backing up THE CAPTAIN => BACKUP A. 5,783 files (5.90 GB) to copy.
* An error occurred while preparing to delete a folder.
Current privileges do not allow the operation.
Path: BACKUP A:.Trashes
* 10/31/10 11:12 AM Backup cancelled. 0 files (0 K) copied.
I'll look into your recommendation a little later regaring possible damaged .plist file.
With Carbon Copy Cloner (CCC), I'm discovering that I have a new backup shortcoming. This new external backup HD is USB (actually, it's my second backup) and since the backup source is a PowerPC, Carbon Copy Cloner cannot create a bootable backup. I need to have my Apple 'Mail' program with all its archived emails, as well as my library>mail downloads, and numerous other system and user files backed up. When using CCC to back up the entire PowerPC source drive to the target USB drive, none of the above listed files are copied.
With a daily routine backup regimen solidly in place, having a second bootable backup drive (and having my mail and associated system files backed up) may not be as mission critical, although I'd certainly prefer all system files associated with my user to be on two separate backups.
However, at present I am nearing completion of a major primary drive upgrade and system reorganization, and my 1st backup drive is an archived backup from before the upgrade....I want to make certain everything is squared away before I erase that archive. Therefore, this new USB HD is my only current backup until I complete the transition. I want security knowing my system user files are backup up before I move forward.

Saving master page in search template throws error "UserAgent not available, file operations may not be optimized"

Hi Folks,
I was trying to save basic search template master page "seattle.master" after making change to the template.
I have added just "CompanyName" folder and update the line below in seattle.master.
Change is this : <SharePoint:CssRegistration Name="Themable/CompanyName/corev15.css" runat="server"/>
When I save it, and refresh page on browser, it shows "Something went wrong" error.
ULS says the following error : "UserAgent not Available, file operation may not be optimized"
Pls let us know if there is a solution.
Any help Much appreciated !
Thanks,
Sal

Hi Salman,
Thanks for posting this issue,
Just remove this below given tag and check out. It might be happened that your control is conflicting with others.
Also, browse the below mentioned URL for more details
http://social.msdn.microsoft.com/Forums/office/en-US/b32d1968-81f1-42cd-8f45-798406896335/how-apply-custom-master-page-to-performance-point-dashboard-useragent-not-available-file?forum=sharepointcustomization
I hope this is helpful to you. If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

CUEAC - Parked Calls not Reverting to Operator

Similar Messages

Maybe you are looking for