CUEAC Server: how long do we need purge the database of SQL?

hi
today all our attendant consoles of switch board were out of service, later i found the error from the server log file and event viewer:
SQL.Exception(p, or setting autogrowth on for existing files in the filegroup.
Could not allocate space for object 'dbo.Call_Details_002'.'Call_Seq_Idx' in database 'ATTLOG' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping )","DBXErrorCode:3604","Exception","" SQL.Exception(p, or setting autogrowth on for existing files in the filegroup.
Could not allocate space for object 'dbo.Call_Details_002'.'Call_Seq_Idx' in database 'ATTLOG' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping )","DBXErrorCode:3604","Exception",""
CREATE DATABASE or ALTER DATABASE failed because the resulting cumulative database size would exceed your licensed limit of 4096 MB per database.
so i have to purge the database on admin web, then restart the services , finally everything is fine.
but now i worry about when it will happen again?
is there anything i can do and let the database automatically purge?
thx for your answer!

Looks like there is no way to automate / schedule the database purge. You will need to do it manually. Please check the 'Database Purge' section in the following link for additional details
http://www.cisco.com/en/US/docs/voice_ip_comm/cucmac/arc/CUACBE_91110WAG.pdf
HTH
Manish

Similar Messages

HOW LONG TIME YOU NEED TO MAKE GPS TO WORK WITH OV...

Question to NOKIA:
HOW LONG TIME YOU NEED TO MAKE GPS TO WORK WITH OVI MAP 3.1 in N97?
On all N97 I know and as you can read here in forum the GPS doesn't work usable in N97 and with MAP 3.1.
I believe that this is a software problem because often I get a GPS signal inhouse and in the wood, but from one second to the other N97 lost the GPS signal. And this in the best weather condition under free sky. Sometimes gps signal works for 15 minutes, then the signal will drop every minute or so.
The current position on map is shift (past) abaout 40-50 meters from the real position, so its unable to use.
The calculated speed is always changing between 0 and the current speed.
I have updated phone to de newes software and firmware also to ne newest maps also has hard reseted and reformatet and the problem ist still the same. If I switch off the option "Maps improvment" (which SENDS DATA TO NOKIA!!!) the the drop outs are fewer. But evreytime the position on maps is shift about 40-50 Meters from right position. Is there a mistake in calculation the position? Also the speed is jumping sometimes from 0 to x and back.
CAN NOKIA TELL US WHEN THIS BUG WILL BE FIXED, AND CAN NOKIA OFFER US A REFUND.
I have payed a lot for N97 and alot for the navigation licence and a lot for accesoires and a lot for the traffic security assistance. So I want a working phone! I dint have payed money for e alpha-stadium phone.
If this is realy the quality of nokia phone, then It is the latest phone I have buyed from nokia.
By the way, the phone has many many many many other bugs as described in this forum.
Really bad work NOKIA! :-(
I was so excited with my N95 and now this mess...
NOKIA please answer us forum members, what you plan to do with the N97 bugs. When we can hope that the bugs are gone? Otherwise I will return my phone and want my money back and I sue for compensation.

I have no word to disagree with you and hoping that Nokia soon will make some press statement or something else to tell us what they do with their flagship, sorry bugship Nokia N97.
Could be a shame recognize errors, but it's worst not to say nothing ant let the bad news of Nokia N97 spread for internet even if they want to sell a Nokia N97 Mini in the near future.
I understand and supose that we will no have no new version till september because we are in the last week and july and the activity in august decrease really high... but at least someone of Nokia could tell something about this problems and if it's possible all the other problems.
Why Nokia Beta Labs Forum there is a direct contact with Nokia workers, and in discussions is relly rare to find?
Yesterday is history.
Tomorrow is a mistery.
Today is a gift.

I AM TRYING TO DOWNLOAD MUSIC FROM I TUNES TO MY NEW IPOD BUT I KEEP GETTING "APPLE ID HAS BEEN DISABLED." HOW LONG DO I NEED TO WAIT BEFORE IT'S "ENABLED" AGAIN?

i am trying to download music from i tunes to my new ipod touch but i keep getting the message "apple id has been disabled." how long do i need to wait before it's "enabled" again? or what can i do to "enable" it again?

Have you tried the links on this page http://www.apple.com/support/appleid/ ?

How LONG I'll need to wait for Apple GENIUS fix the incompatibility

I need to work....How LONG I'll need to wait for Apple GENIUS fix the incompatibility # KEYNOTE and LION???
What is the best thing I've to do???
Downgrade the OS??? Change the Plataform????

Each region has little differences that need to be changed and setup in order for it to work on your phone correctly. Just need to sit and wait...
Nokia 5800 XpressMusic Red V52.0.007
Hit the Kudos if I helped!

How long does it take for the certificate arrive? I am OCA? I need it urgen

Hello Experts,
I have recently finished OCA. How long does it take for the certificate to arrive?
I need it urgently.
Can I pay and expedite the process of Mailing thru fedex.
Thanks,
Vishal

From the Oracle Certification FAQ
"The testing center will send your exam results to the Oracle Certification Program. All results are processed once a week. Once all the certification requirements within the track you are pursuing have been complete, including completion and approval of the Course Submission Form, you should receive your certification success kit within 6-8 weeks. The Success Kit will include a personalized certificate as well as instructions on how to obtain your Oracle Certification logo."
So if you just recently passed the exam, expect that you'll get your physical certificate in 6-8 weeks. It should show up in CertView relatively quickly, but fulfillment takes time.
Justin

How long do I need to wait between Citi SP CLIs?

A few days ago, I got a $1000 SP CLI from Citi. This morning, I noticed the SP screen is back. Filled in my info, got denied. But if I go back to the request CLI link, it's still the soft pull screen. So how long do I need to wait before I try again?

pritomd wrote:
Sorry to jump in/hijack, but two side questions: 1) How do you do a SP CLI? Is it the same link in Account Management>Balance Transfers, Lines, & Loans>Request a Credit Line Increase?2) Is it confirmed that this method is a SP and not a HP?It's going to be an SP if it says: It's easy to find out if you qualify for a credit limit increase. A credit bureau report will not be requested and you will receive an instant decision. So far for me they've always either offered me a CLI or declined straight off the bat (too recent CLI, or some time ago, not good enough scores) but no HP. It's not guaranteed, check the language on your profile. Apparently it could differ between cards and definitely between users.

How Long does Apple need to send me my bill via email?

I bought my iPad 4 days ago(Saturday) and still didn't receive the bill via email yet neither does it appear on my bank account.
How long does apple need? Is this normal?

It can take a while for you to get your iTunes receipt, depending on business hours. You can see your orders by signing in to iTunes. Details are here: http://support.apple.com/kb/HT2727

How long does it need to charge iphone 5 for the first time?

Does anyone knows how long does it need to charge iphone 5 for the first time?
Message was edited by: Islius

Until it reads 100%

HT1539 I keep getting an error code that says "code redemption temporarily unavailable try again later". how long do I need to wait to try again?

I keep getting an error code that says "code redemption temporarily unavailable try again later". how long do I need to wait to try again?

Hi, Kenny.
Thank you for visiting Apple Support Communities.
There are a couple things that I would recommend trying. Try closing all open applications and power cycle the device. Next, go through the section labeled Troubleshoot issues on an iPhone, iPad, or iPod touch in the second article below. If the issue persists, try completely signing out of the iTunes Store on the iOS device and sign back in. Be sure to test downloading an application after each step.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Cheers,
Jason H.

How long does it take for the credit on the iphone 5 itunes to start declining after a purchase

how long does it take for the credit on the iphone 5 itunes to start declining after a purchase? I used a $15 gift card, it was redeemed, and it showed up in my itunes account on my phone but after buying songs, the credit did not decline from 15, even after I restarted itunes on my phone.

Nt sure on O2, but that seems to be a long time, you need to call your carrier and make sure they dont need to activate it. I believe they do.

How can i make iphone mobile website, database in Sql Server 2005 ?

how can i make iphone mobile website, database in Sql Server 2005 ?
Thanks & Regards
Jamshed Ali
Email id: [email protected]

You need to be a little clearer in what you're asking.
You can't make any web site in SQL Server - it's a database engine, not a website tool.
What you can do is create web sites that pull data from a back-end SQL Server, but the SQL server doesn't handle the client connection at all (that's handled by a web server such as Apache, IIS, or similar).
There are many ways to build such a site including .NET, PHP, Perl and more (although I don't know all the options for Windows servers because they're not as common outside of corporate/enterprise networks).
In either case, given your choice of development language (HTML, plus one of the PHP/Perl/.NET/etc. options), plus your database (SQL Server) plus your web server (IIS, Apache, etc.) you can make any web site you like (or, at least, you're capable of developing).
If you want to opimize that web site for iPhones then there are many references on how mobile browsing differs from the desktop. I'd recommend this book as a reference (and, yes, I understand the irony of linking to a paperback book for web design guidance ). Googling mobile web design (or iPhone web design) might yield more results.

How long should it take for the iOS 5 iPhone software to update?

How long should it take for the iOS 5 iPhone software to update? Mine is taking a ridiculous amount of time, to the point where I need to stop it as i need to go out and need my phone !

Depends on how strong your wifi connection is.
you can try a reset hold down the home/sleep button together until you see the apple logo and then release.

How long does it take for the custom field created in SFDC to show up in the field mapping list?

How long does it take for the custom field created in SFDC to show up in the field mapping list? I hit the refresh field button, but it is not showing up after 5 min. Do I just need to have patience?

Hi,
What do you have to do to the field in SFDC to make it accessible so that it shows up in the Eloqua field mapping area as a field to be mapped?

How to connect captivate file in a database (MS SQL SERVER 2008)

Hi...
How to connect captivate file in a database (MS SQL SERVER 2008) ???
Kindly response please..
thanks!!!

Hi there
See if the link below helps you out.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Entity Framework doesn't create the database in SQL Server Management 2012, instead it just creates in (localdb)\v11.0 How to fix it?

Hi, I'm Begginer in Entity Framework. Then I'm having some problems.
I created my entities and I give Save Changes. (Ok)
Then, I Tried to Connect with the database through Server Explorer, if I use the instance of the SQL Server Management Studio 2012(PC-PAULO\INSTANCIAPJ) as Server Name, the database doesn't appears but, if I use the the instance (localdb)\v11.0 the dabase
appears.
How to change the save to the SQL Server Management Studio 2012, I don't know where this (localDB)\v11.0 saves.
Help-me Thank you :D

Hello PauloJos,
The code should be ok and it is really strange that the database is only created into the local database in your machine. I am wondering if it is related with the machine environment, could you please have a try with below demo on your machine which works
on my side and if it is possible, please have a try to run your application on other machines to see if it works:
class Program
static void Main(string[] args)
#region https://social.msdn.microsoft.com/Forums/en-US/00eff3c4-2336-4807-9212-e6f2a6c8812e/entity-framework-doesnt-create-the-database-in-sql-server-management-2012-instead-it-just-creates?forum=adodotnetentityframework
using (CFDbContext db = new CFDbContext())
db.Database.CreateIfNotExists();
#endregion
public class CFDbContext : DbContext
public CFDbContext() : base("UltraFoda3") { }
public DbSet<TestOne> TestOnes { get; set; }
public class TestOne
public int ID { get; set; }
public string Name { get; set; }
Config file is similar:
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>

<section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</configSections>
<entityFramework>
<defaultConnectionFactory type="System.Data.Entity.Infrastructure.LocalDbConnectionFactory, EntityFramework">
<parameters>
<parameter value="v11.0" />
</parameters>
</defaultConnectionFactory>
<providers>
<provider invariantName="System.Data.SqlClient" type="System.Data.Entity.SqlServer.SqlProviderServices, EntityFramework.SqlServer" />
</providers>
</entityFramework>
<connectionStrings>
<add name="UltraFoda3" connectionString="Data Source=YourServer;Initial Catalog=UltraFoda3;Integrated Security=True;MultipleActiveResultSets=True" providerName="System.Data.SqlClient" />
</connectionStrings>
</configuration>
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

CUEAC Server: how long do we need purge the database of SQL?

Similar Messages

Maybe you are looking for