Cuento con Adobe Acrobat Pro, suscripción mensual, pago mes a mes desde hace tres meses desde mi tarjeta. Pero me aparece la leyenda que se me acabo mi Software de Prueba, y que pague por algún Plan. Cómo lo resuelvo? Gracias

@

Hi asiain,
Do I understand correctly that you have an annual Acrobat subscription, but that it continues to start in trial mode? If that's the case, you just need to activate your software by signing in with your Adobe ID and password.
Best,
Sara

Similar Messages

  • I bought the Adobe Acrobat Pro on Disc, then realized my new laptop doesn't have a CD drive. Can I just download it with my serial number or do I have to send it back?

    I bought a new laptop after mine was stolen. I also purchased Adobe Acrobat Pro on Disc. I then realized my new steady state laptop doesn't have a CD drive... Can I download the software with my serial number or do I have to send it back and purchase the downloadable version?

    I also purchased Adobe Acrobat Pro
    Which version?
    You can simply download the installer from Adobe, install then enter your serial number when prompted.
    Download and Installation Help

  • How to deactivate adobe acrobat Pro version 10?

    I need to reformat my hard drive and I need to deactivate Adobe Acrobat Pro version 10.  I go to the help options and "Deactivation" is not even an option.
    Any idea of how to deactivate the software if there isn't even an option?
    Thanks for your help
    Dave

    Hi Dave,
    You are not getting the deactivate option as it might be possible that Acrobat was installed with volume license serial key.
    If the deactivate option is not available then please go ahead and uninstall the program.
    After reformatting the drive, re install the software.
    Regards,
    Anand

  • J'ai acheté ADOBE ACROBAT PRO XI en janvier 2013, vous me dites que ce logiciel nécessite une mise à jour, je n'arrive pas à accéder au serveur. merci de me dire ce que je dois faire URGENT

    j'ai acheté ADOBE ACROBAT PRO XI en janvier 2013, vous me dites que ce logiciel nécessite une mise à jour, je n'arrive pas à accéder au serveur. merci de me dire ce que je dois faire URGENT

    Hi Jacques ,
    Try repairing it first .
    Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
    Then you can try updating it to the latest version.
    Launch Acrobat>Navigate to Help>Check for Updates.
    Let us know how it goes.
    Regards
    Sukrit Dhingra

  • J'ai acheté ADOBE ACROBAT PRO XI en janvier 2011, vous me dites que ce logiciel nécessite une mise à jour, je n'arrive pas à accéder au serveur. merci de me dire ce que je dois faire URGENT

    j'ai acheté ADOBE ACROBAT PRO XI en janvier 2011, vous me dites que ce logiciel nécessite une mise à jour, je n'arrive pas à accéder au serveur. merci de me dire ce que je dois faire URGENT

    Hi Jacques ,
    Try repairing it first .
    Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
    Then you can try updating it to the latest version.
    Launch Acrobat>Navigate to Help>Check for Updates.
    Let us know how it goes.
    Regards
    Sukrit Dhingra

  • Individual, Creative cloud, single app, Adobe Acrobat Pro X1, Forms and Responses allowed

    Dear forum,
    Firstly many apologies if this is a stupid question or if it has been answered before, but I'm very new to using FormsCentral only in the past few days.
    I purchased an Individual Creative cloud, single app plan at £17.58 per month for only Adobe Acrobat Pro X1, I am able it seems allowed to create forms etc, however are there any responses per form limit for my subscription? when looking at the features for the Adobe Acrobat Pro X1 product it only says FormsCentral is included and does not suggest any limitations. However, I've seen other comments which suggest needing to upgrade, but I have not seen any messages asking me to. I would prefer to know the limitations now rather than doing an important project form and then suddenly see messages appear once 50, or so responses have arrived  ?
    Any help or guidance would be much appreciated.
    kind regards
    kevin

    Hi,
    You get a free subscription with FormsCentral with Acrobat Pro XI. You will only be able to create one form and collect 50 responses. To get more functionality, you'll need to upgrade to basic or plus plan. Please check out Pricing options - Free, Basic, and Plus options | Adobe FormsCentral.
    Thanks,
    Wenlan

  • Adobe Acrobat Pro : Problèmes avec le porte-document

    Bonjour,
    Je viens vers vous car j'ai quelques soucis avec un porte-document PDF.
    Tout d'abord, je suis sous Adobe Acrobat Pro version 9.0.0.
    J'ai créé un porte-document PDF en vu de créer un ebook, et pour cela je suis allé sur internet voir des tutoriels pour la mise en page.
    Or dans ces fameux tutoriels, ils ont la même interface que moi mais des panels d'options beaucoup plus vastes.
    Je voulais savoir si cela était dû à une version supérieure ou s'il fallait installer un plug-in ?
    Si oui quelle version? Et sinon quel plug-in?
    En vous remerciant par avance
    Thomas

    Tout d'abord, je suis sous Adobe Acrobat Pro version 9.0.0.
    Je voulais savoir si cela était dû à une version supérieure…
    Bonjour,
    Oui, la réponse est la question : il faut impérativement effectuer la mise à jour en 9.5.5 (la dernière version, voir : http://goo.gl/s22UI0 ).
    Les autres "layouts" que tu vois dans les tutos sont apparus avec la version 9.1

  • Serial Number problem Adobe Acrobat Pro XI - Illustrator CS6

    Bonjour
    J'ai reçu hier les programmes  Adobe Acrobat Pro XI et Illustrator CS6 par mon Université. J'ai reçu aussi les deux licences qui vont avec. Maintenant quand j'essaie de introduire les deux licences un message "we are unable to validate this serial number……." s'affiche. Je devrais contacter le service client, mais il y a pas de numéro de telephone et la chat marche jamais…..
    Est ce que quelqu'un a déjà une solution ?
    Les deux programemes vont être installe sur un Macbook Pro 2.4 GHz Intel Core i5 avec une version du OsX 10.8.5.
    Merci
    Michele

    Bonjour,
    Tout est là : Contacter l’assistance clientèle
    Je cite :
    Appelez le :
    France: 01 71 23 01 96
    Belgique: 027119960
    Suisse: 044 800 9581
    Du lundi au vendredi, 9am - 5pm CET

  • Adobe Acrobat Pro XI No inicia periodo de prueba de 30 dias

    Buena Noche
         Acabo de descargar e Instalar una versión de prueba de Adobe Acrobat Pro XI pero al momento de iniciarla me aparece una pantalla avisándome que mi periodo de prueba de 30 días ha caducado
           Por favor me podrían indicar que puedo hacer? Gracias

    Hola framig,
    Favor de enviar esta consulta en foros de Acrobat: https://forums.adobe.com/community/acrobat
    Saludos,
    Florencia

  • Problemas con Adobe Premiere Pro CS5.5

    Hola!
    Recientemente adquirí el Programa Adobe Premiere Pro. Version CS5.5, ya he echo varios vídeos, ediciones, cosas sencillas. Pero recientemente me surgió un problema: Prepare todo para realizar una edición de un vídeo de graduación, cuando importo el vídeo, ya sea del CD-DVD o de la misma computadora, y lo arrastro hasta el timeline (así creo que es que se llama no estoy segura, pero me refiero al área en donde se edita el vídeo) el vídeo se importa sin problemas pero al ponerle play el audio que se escucha es el audio de un vídeo que anteriormente se había editado en el programa. Les pido por favor que me ayuden a resolver este problema lo mas pronto posible.
    Gracias anticipadamente.

    Here is what one of the Nvidia folks said when a similar question was asked elsewhere:
    "That’s right; a Quadro 6000 and Tesla C2075 are not identical but they are very similar and you can expect similar performance. There are a few reasons you might want to use a Maximus configuration for Premiere Pro rather than a single Quadro 6000:
    1.  Having both a Quadro and Tesla GPU in the system means when the Tesla is cranking full-out on Mercury Playback Engine the Quadro is unaffected, so you can, say, open After Effects or other application that may take advantage of the Quadro, and system performance on that app will be better than if it was competing for resources with MPE on a single GPU.
    2.  In the future, we expect many users will want to run an animation application (using the Quadro) and a simulation application (on the Tesla) at the same time to provide animators with a level of interactivity they don’t have without Maximus technology. Example video is here. (http://youtu.be/_LagqqsVO28)
    3.  It costs less. A typical Maximus configuration has a mid-range Quadro (e.g. a Quadro 2000) and a Tesla C2075, which in that instance costs hundreds of dollars less than a single Quadro 6000 and offers similar performance plus the workflow advantage listed above.Of course, some users may want to run a Quadro 6000 and a Tesla C2075 and get maximum performance, but others can actually get the best MPE acceleration for less money with Maximus technology."

  • Como posso encontrar uma fonte no Adobe Acrobat PRO?

    Boa Tarde.
    Eu tenho um problema no Mac que é o seguinte:
    Instalei no MAC um conjunto de letras que são designadas por tipo de letra FLUX, porém quando abro qualquer aplicativo do adobe ele encontra sem problema algum.
    Mas quando abro especificamente o adobe acrobat pro ele encontra todos os tipos de letra e não o FLUX como desejaria, o que posso fazer quanto a isso??
    Obrigada

    Hi Walter,
    The end-user license agreement allows you to install Acrobat on up to two computers. Do you have the installation media for Acrobat? What version of Acrobat are you installing, and what operating system and version are you on?
    As long as the second computer is running a supported operating system, it should be as easy as installing and activating on that new computer. Here are some documents that should help you get started:
    System requirements | Acrobat family of products - Adobe
    Activation & Deactivation Help - Adobe
    Best,
    Sara

  • How do I set customized changes in Custom Toolsets during deployed installation on Adobe Acrobat Pro XI?

    I am trying to set settings in the Custom Toolsets, specifically Protection\Redaction Properties - Example:  Changing highlight color and enabling text overlay.  Is there a way to modify the settings for a deployment?  I am unable to find a way through the Customization wizard and am having trouble finding documentation on deploying customized settings to toolsets. 
    Issue:
    Customizing Toolsets as part of Adobe Acrobat Pro XI Deployment
    Environment:
    For deployment I am using the Adobe Customization Wizard and SCCM 2012 to distribute and install Adobe Acrobat Pro XI.
    Environment has both Windows 7 and Windows 8.1
    Adobe Acrobat Pro XI
    Thank you,
    Mike

    It's in the ETK:
    3   Pre-Deployment Planning — Enterprise Administration Guide
    3.7.4   Tool Sets
    Acrobat 11.0 introduces a streamlined way to create and manage custom tool sets across the enterprise. A Customize button in the upper right-hand area of the toolbar allows users to create new tool sets, manage existing tool sets, and choose any existing tool set.
    This feature helps organizations standardize task-specific tool views, reduce training costs, and improve employee efficiency by grouping related tools into a common view. This feature allows:
    End users to easily create or import custom tool sets.
    Easy switching between different tool sets.
    IT to create, distribute, and otherwise manage tool sets across the enterprise.
    _images/toolsetmenu.png
    3.7.4.1   Tool set file locations
    Tool set files reside in two locations:
    A local user directory (full access): Files which are stored and imported by the current user are placed in the default current user’s directory. For example:
    C:\Users\<username>\AppData\Roaming\Adobe\Acrobat\11.0\UICustomization\<anyname>.aaui
    A local, product directory (read only): Files in this directory are visible to any user on the machine. For example:
    C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\UICustomization\<language>\<anyname>.aaui
    3.7.4.2   UI overview
    To work with tool sets:
    Choose Customize > Manage Tool Sets.
    Perform any needed action.
    Note When creating a new Tool Set, you can choose any available tool in any desired order.
    Managing tool sets
    _images/Toolsetpanel.png

  • Mettre adobe acrobat pro en français

    Bonjour,
    j'ai acheté sur Amazon Adobe Acrobat Pro, mais c'est une version anglaise (je suis étudiante) et je voudrais la mettre en français
    Merci par avance pour les éventuelles information pour savoir comment faire cela
    Alice

    Allez dans Acrobat > Preferences (sur Mac) ou Edit > Preferences (sur PC) puis sous l'onglet Language changez Application Language.
    Redémarrez Acrobat pour que le changement prenne effet.

  • Adobe Acrobat Pro in Windows 7 w/ Autocad in XP Mode- not working

    I'm running Autocad Arch Desktop (ADT) in Windows XP Mode within Windows 7, and have Adobe Acrobat Pro installed in Windows 7.  Unfortunately, no "Adobe PDF"  pulldown was created within ADT once Adobe Pro was installed, and there isn't any sign of Adobe in ADT (normally, Adobe automatically installs pulldowns within ADT once installed).  Adobe and ADT function normally otherwise.  Does anyone know how to get Adobe Acrobat Pro in Windows 7 to recognize and work with ADT in Windows XP Mode?

    Can you tell me how to set the defaults to Courier 10pt font?  I tried select all and it's grayed out, but that was after the
    fact.  Where are the original default presets?
    Thank you in advance.

  • Trying to update Adobe Acrobat Pro DC, but it's been stuck at 35% for a little over a day?

    Trying to update Adobe Acrobat Pro DC, but it's been stuck at 35% for a little over a day?

    Hi mattwillball,
    Could you please let me know what version of OS are you using.
    You might need to refer the following KB doc link for issue where Acrobat download and install process is stuck at 35% on MAC:
    Installation Prompt to Close SafariNotificati
    If this does not help, then please let me know if you get any other error message when installation is stuck.
    Hope to hear from you.
    regards,
    Anubha

Maybe you are looking for

  • Image processing doesn't show

    Hi! I am trying to do image processing, where it will detect the object and box it up when detected.  However, I did not manage to detect the object, which in this case, a masking tape. Can anyone tell me what is wrong and how to solve it? Below is t

  • When I use under file save page as a desktop icon firefox downloads 2 a icon and a folder, how do I get rid of the folder and just keep the icon like in I.E.

    I'm just trying to save my favorite website short cut icon to the desktop instead of using bookmarks for everything. In I.E. you have the option to save to desktop your favorite website and you only get a shortcut icon. but in Firefox if you save you

  • K9AGM4-L online games problem

    I have Athlon 64 2.7 GHZ (LE-1640) socket AM2 PROCESSOR MSI K9AGM4 AMDD690V/AM2DDR2 800/PCI-E/VS/S/RAID/LAN KINGSTON 1GB DDR2 PC667 SEAGATE 160GB STA 500W POWER SUPPLY it is very lag and it freezes on online games but it works fine with GTA, Warcraft

  • Need 2 links in an Work item???

    Hi Experts, I am having a requirement as i need to display the 2 Links which should route to a T-Code via a work item... I can display the 1 link for a transaction VA03 based on the Display method in a business object and in the same work item i need

  • BPS Flat File upload

    I have used the How To Paper for BPS Flat File update and it does not give me any error when I run, but I don't see the data in the cube, How can I validate if the data from the flat file was updated or inserted. Thanks Jagraj Dhillon