CUIC Report Scheduled Execution Error

Hi,
A report that was running normally in previous days errored today and I wanted ot find more information as to why. I was hoping I would have to go in an enable trace logs etc through the cli. Is there any other way to get some details?
Thanks!
Mel

Hello Murali,
Thanks for the reponse. But set 0002$ZA13#######ROW0236 is not available in system.
Please could you guide me on the same.
Thanks & Regards
Shreenath

Similar Messages

  • Report painter execution error - GR657 - set does not contain any entries

    Hello,
    During our execution of report we are getting the below error:
    Set 0102PCBT1IPROVDIV in set 0002$ZA13#######ROW0236 does not contain any entries
    Message no. GR657
    Diagnosis
    You cannot use empty sets to define reports.  The single-dimension set contains a basic set that does not contain any values.
    Procedure
    Use a set that contains at least one value, or enter values for the set defined.
    This has been discussed in a similar Thread in May 2010 by puri & Praveen Jagdeesan,
    However I am unable to trace the set & how to delete the blank values.
    0002$ZA13#######ROW0236 or ROW0236 in the system.
    Set 1IPROVDIV is exisitng in system.
    Also when we go to KAH3 - Cost element hierarchy & see in the where used list we are not able to see the set being used in the report whereas the system from where we have exported the report we can see that this set is being used in the report.
    Please could you help in resolving the same.

    Hello Murali,
    Thanks for the reponse. But set 0002$ZA13#######ROW0236 is not available in system.
    Please could you guide me on the same.
    Thanks & Regards
    Shreenath

  • "Report Designer"    Execution Error

    Hi Gurus...
    client is using SAP GUI 710 version. while executing the report using "Report Designer".
    we are getting an error, "This report web Itemcan display reports with versionnumber 2.1 or lower. this report has version number 2.2"  To display this report, use a newer version of the report web Item"
    this is the error, <removed by moderator>
    Cheers
    Edited by: Siegfried Szameitat on Jan 19, 2009 12:48 PM

    Unable to see Hierarchies in report designer?
    cheers

  • Report painter execution error - KH014  "Report does not exist".

    Hi All,
    I customized one report in FSI3 and used SE43 to create a t code for this report. In the development system, report will be executable from this t code.
    Transport requests are successfully transported from development to production without any error. But on production when I tried to execute the report, I am getting the error KH014 - "Report does not exist".
    While checking in production I found that the report was missing from report tree in FSI3 and as a result the customized report cannot be executed. As per basis guys there was not a issue in request transportation.
    Has anyone encountered similar problem? How was it resolved?
    Thanks.
    Prashant

    Hi Mikko,
    Thanks for your reply but your solution is not working.
    Hi Stacy,
    I can execute the report from t codes like FSI3 & FSI0 in development.
    I used SE43 for t code creation. At the time of t code creation there is a option called "Drilldown" under Report type heading, In drilldown option I selected my report from report type 002 (Financial Statement Key Figure) and created the t code. After this I transported both the request to production server.
    Please let me know if this is wrong method or there is any other option to transport this report in Production.
    Thanks & Regards,
    Prashant

  • Error on open the Report Schedule Page from other application

    Hi,
    I want to open the only "Report Schedule Page" of the InfoView from my application. For this I am using the following url -
    http://servername:8080/businessobjects/enterprise115/desktoplaunch/InfoView/CrystalEnterprise_Report/schedule/get.do?objId=526
    The problem I am facing is that sometime the Report Schedule Page open successfully and sometimes it gives the following error -
    HTTP Status 400 - Invalid path /InfoView/InfoView/logon/logon was requested
    type Status report
    message Invalid path /InfoView/InfoView/logon/logon was requested
    description The request sent by the client was syntactically incorrect (Invalid path /InfoView/InfoView/logon/logon was requested).
    Apache Tomcat/5.0.27
    Please help me in resolving this issue?
    Thanks,
    Vicky

    Hi,
    first of all it is neither supported nor recommended to embed or call single components or pages of InfoView in other applications. You would have to write your own schedule page using the BO SDK.
    The problem you are facing looks like the component you are calling does not get or find a valid session to the BOE system in the desired place. But even if it would (sometimes you are seeing that) I doubt that it would work to schedule a report using this mechanism as the further requests when pressing the OK button will call other parts of InfoView then, which will probably cause other problems. So try to use another solution as stated above.
    Regards,
    Harald

  • Crystal report scheduling error

    Hello,
       We are getting this error Intermittently, "login error. [CrystalEnterprise.DiskUnmanaged]: [Logon failure: unknown user name or bad password.]" when we schedule crystal report to file location. I had checked the user name and password and access to the file location, they are fine. We have scheduled this report to run daily, but somedays it throws the above error and somedays it runs fine. Any ideas please?
    Thanks,

    Rakesh,
    Issue has been resolved in below forum, please check
    CrystalEnterprise.DiskUnmanaged: Logon failure
    Crystal Report Scheduling Destination Options in Infoview
    Regards,
    Arjun

  • Scheduled report failures - Unexpected error getting the HTTP response

    Getting this error when scheduled report executes:
    Unexpected error getting the HTTP response stream while generating report: http://cdmdb1c.nam.nsroot.net:4889/em/console/reports/render

    Hi..
    Thanks for the comment.
    Below is how my web.xml entry looks like.
    The requirement is to send a 404 error response and that will be handled by a servlet which inturn writes the output to the response object.
         <servlet>
              <servlet-name>ErrorPageServlet</servlet-name>
              <servlet-class>com.test.ErrorPageServlet</servlet-class>
         </servlet>
         <servlet-mapping>
              <servlet-name>ErrorPageServlet</servlet-name>
              <url-pattern>/error</url-pattern>
         </servlet-mapping>
         <error-page>
              <error-code>404</error-code>
              <location>/error</location>
         </error-page>>>
    the first option to turn off the "show friendly html error pages" works fine.
    It would be better if I can get a different solution

  • CJS-00030  Assertion failed: Execution of SQL script reports an unexpected error.System Copy

    Experts,
    I am performing Homogeneous System copy using backup/restore method.I have taken QA system backup ie dump files and trying to build on Sandbox system for testing purpose.Everything went fine and was able to load the dump but stuck at one of the point and throwing me error
    ERROR      [cinstallercallbackimpl.cpp:228]
    CJS-00030  Assertion failed: Execution of SQL script reports an unexpected error.
    When I checked the sapinst_dev log I found the below error but not able to fix it and not aware to proceed further
    1> use SID
    1> EXEC sp_changedbowner sapsa
    Msg 17362, Level 16, State 1:
    Server 'SID', Procedure 'sp_changedbowner', Line 181:
    The proposed new db owner already is a user in the database or owns the database.
    (return status = 1)
    I am sure these may be small changes that have to be made by changing the db owner and Im not exactly sure how to perform it.
    Note:I am Using the Windows environment with Sybase ase database and SWPM tool to perform.
    Appreciate your suggestions
    Thanks

    I fixed the issue ..by changing the owner sapsa.Bingo !!!!

  • UCCX Historical Report - Scheduling Report Error

    When scheduling a Historical Report the below errors are returned at time of schedule.
    0 ERROR Mar 18 2014|00:00:27 Writer FileMapping = 000000E8, GlobalAddress = 00220000
    1 ERROR Mar 18 2014|00:00:31 10644:PrintDBConnectionString:pwd not found in Connection String
    2 ERROR Mar 18 2014|00:00:32 12040:PrintDBConnectionString:pwd not found in Connection String
    3 ERROR Mar 18 2014|00:01:21 10644: Exception while exporting report ICD_Contact_Service_Queue_Activity_Chart_en_US
    4 ERROR Mar 18 2014|00:01:21 10644:LogComError: the error is = Code= 80043ac1, Code Meaning = IDispatch error #14529
    5 ERROR Mar 18 2014|00:01:21 10644:Source=Crystal Reports ActiveX Designer
    6 ERROR Mar 18 2014|00:01:21 10644:Description=
    7 ERROR Mar 18 2014|00:01:21 10644: thread in Export method:Exception occurred for report I
    8 ERROR Mar 18 2014|00:01:21 12040: Exception while exporting report ICD_Contact_Service_Queue_Activity_Chart_en_US
    9 ERROR Mar 18 2014|00:01:21 12040:LogComError: the error is = Code= 80047e41, Code Meaning = IDispatch error #31809
    10 ERROR Mar 18 2014|00:01:21 12040:Source=Crystal Reports ActiveX Designer
    11 ERROR Mar 18 2014|00:01:21 12040:Description=Unknown Database Connector Error
    12 ERROR Mar 18 2014|00:01:21 12040: thread in Export method:Exception occurred for report I
    Not sure if related to strings 1 & 2? If so, I have no idea what the pwd is...

    Have you tried changing the password of the Historical Reporting User?
    Tool -> Password Management

  • CR 2008 Report Printing,hit error "Server Error in '/CRReport' Application"

    Hi
    We encountered Error Message when trying to print Crystal Report 2008 via Windows Internet Explorer.
    "Server Error in '/CRReports' Application."
    Failed to Open Report
    Description:
    An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error & where it originated in the code.
    Exception Details:
    "System.Runtime.interopService.COMException: Failed to open report."
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    I really appreciate your feedback.
    Jenny Heng

    Make sure you're using the latest SP:
    https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
    Consider adding latest FP also:
    https://smpdl.sap-ag.de/~sapidp/012002523100001024152010E/cr2008_fp24.zip
    Make sure you are disposing of the report object once you are done with it and before you re-run it with new parameters (.close, .dispose).
    Test without the combo box. Let the report prompt. Can you reproduce the behavior now? If not, try to supply the parameter values via a text box. Can you reproduce the issue now? E.g.; is it the combo box that is the issue, or the report?
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • Crystal report 9 memory error.

    we are using crystal report 9 with sybase power builder..... at some client locations we are experiencing the application crash due to memory while opening crystal reports.
    the following errors were noticed
    1.the instruction at "0x77124804" referenced memory at "0x001b3e60". the memory could not be read.
    2.the instruction at "0x7c911daf" referenced memory at "0x00000000". the memory could not be read.
    please guide us what is the issue.. do we need any hotfix or service pack for this.
    regards

    I assume you already tried to reinstall the application and I would recommend to do it one more time, but this time follow the process for so-called manual uninstall
    1. Uninstall Crystal reports 9 using add remove programs
    2. Save backup -up of the Registry
    3. Remove the following registry key (be careful with the registry file):
    HKEY_CURRENT_USER\Software\Business Objects\Suite 12.0\Crystal Reports
    4. Reinstall Crystal Reports 9
    As the next step I would check and disable Data Execution Prevention.
    Go to: Start> Right-click My Computer" select Properties> Advanced tab > click Performance settings> Data Execution Prevention tab.
    If DEP turned on for all programs, then add Crystal Reports (crw32.exe) to except list.
    If DEP is not cause of problems, then I would suggest Process Monitor to locate the reason or at least try to locate it.
    You can download Process Monitor utility from the following page:
    http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
    The same page will tell you how to use it. I would suggest the following steps:
    Close all unnecessary applications/processes
    1. Open Crystal Reports
    2. Start the Process Monitor, stop capturing events (Cntrl-E), clean the display (Cntrl-X), add the following filter (Cntrl-L) "Process Name is crw32.exe then include", click ok.
    3. Start capturing events (Cntrl-E)
    4. Immediately click Format menu on Crystal Reports
    5. Stop capturing events and save the log file
    Now you can look at the log file to see what is going wrong. I would also advice to capture the same log on client machine to compare the sequence of events.
    Gracias...!!

  • Report data binding error unknown column name

    Hi,
    I am having a problem with the new 7.02 update of Report
    Builder. The issue is it's not finding my SQL query.
    I have wrote my query initally in the advance mode, and it
    doesn't seem to reconize it. Is there an issue with this?
    I did manage to fix one of my reports by using the basic mode
    and selecting all my tables and seting my linkage and criteria.
    I have other computers that i have not updated to 7.02 and
    they do not have this issue. Below is the error:
    Error Occurred While Processing Request
    Report data binding error Unknown column name : work_phone.
    Please try the following:
    Check the ColdFusion documentation to verify that you are
    using the correct syntax.
    Search the Knowledge Base to find a solution to your problem.
    Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0;
    .NET CLR 1.1.4322; .NET CLR 2.0.50727)
    Remote Address 127.0.0.1
    Referrer
    Date/Time 13-Jul-06 02:33 PM
    Stack Trace (click to expand)
    coldfusion.runtime.report.Report$ReportDataBindingException:
    Report data binding error Unknown column name : work_phone.
    at
    coldfusion.runtime.report.Report.runReport(Report.java:420)
    at
    coldfusion.filter.ComponentFilter.invoke(ComponentFilter.java:96)
    at
    coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:225)
    at
    coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52)
    at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
    at
    coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69)
    at
    coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
    at
    coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
    at
    coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
    at
    coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
    at coldfusion.xml.rpc.CFCServlet.invoke(CFCServlet.java:106)
    at coldfusion.xml.rpc.CFCServlet.doGet(CFCServlet.java:157)
    at
    javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at
    org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
    at
    javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at
    coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
    at
    jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
    at
    jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
    at
    jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
    at
    jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
    at
    jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
    at
    jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:349)
    at
    jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:457)
    at
    jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:295)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
    This report works in 7.01. So all query variables match with
    a variable in the SQL select statement.
    Anyone have any Ideas??
    Thanks,
    Daniel

    Thank you very much for help.
    The "Unknown column name " is a field still used in my
    report, so I can't remove it.
    After I clear the query in the report and reopen the report
    and apply the same query back to it, I get different error message:
    Element TASKNUM is undefined in QUERY.
    The error occurred in : line 1
    -1 : Unable to display error's location in a CFML template.
    I know for sure this "Element TASKNUM is undefined in QUERY."
    is defined in query. each time it complains something different. I
    get really confused.
    Thanks again.
    Yueming

  • Seagate Crystal Reports ActiveX Designer error '80043ac4'

    Website slows down when users are running reports. Users start getting errors when running any crystal report. After sometime main page itself stops loading and only static html is visible. Following is one of the errors users see:
    Seagate Crystal Reports ActiveX Designer error '80043ac4'
    Invalid directory.
    /opera_mort2/report/AlwaysRequiredSteps.asp, line 54
    Other errors seen on reporting site at that time are
    Active Server pages error 'ASP 0115'
    Unexpected error
    /opera_mort2/report/rpt_level.asp
    A trappable error (C00000005) occurred in an external object. The script cannot continue running.
    authentication and network errors.
    Rebooting the Web Server temporarily fixes the issue however the error recurs again after a day or two. We are seeing this problem in both our PROD and DR server. There was no change done to either of these boxes recently.
    Also at this pint IIS was crashing. Microsoft Support analyzed the crash dumps created from IIS and came up with the following:
    "All the memory dumps captured showed the same DLL that was accessing corrupted memory. This same DLL would also be the one that had originally written to those addresses. The DLL was craxdrt.dll from Crystal Reports 8.0 ActiveX Designer, which was version 8.0.1.0 from 1/28/2000. This DLL should be updated to see if this issue has already been fixed. Other options are to recycle IIS more frequently and move to a new version of Crystal Reports."
    Here is a detailed analysis from Microsoft Support:
    The issue appears to be heap corruption. Normally these are difficult to troubleshoot, however, in this case every memory dump that I looked at had the same component involved.
    start end module name
    42b30000 4307f000 craxdrt (export symbols) craxdrt.dll
    Loaded symbol image file: craxdrt.dll
    Image path: C:\Program Files\Seagate Software\Report Designer Component\craxdrt.dll
    Image name: craxdrt.dll
    Timestamp: Fri Jan 28 15:16:46 2000 (3892235E)
    CheckSum: 0055446A
    ImageSize: 0054F000
    File version: 8.0.0.371
    Product version: 8.0.1.0
    File flags: 22 (Mask 3F) Pre-release Special
    File OS: 40004 NT Win32
    File type: 2.0 Dll
    File date: 00000000.00000000
    Translations: 1009.04b0
    CompanyName: Seagate Software, Inc.
    ProductName: Crystal Reports 8.0 ActiveX Designer.
    InternalName: CRAXDRT
    OriginalFilename: CRAXDRT.DLL
    ProductVersion: 8.0.1.0
    FileVersion: 8.0.0.371
    PrivateBuild: 8.0.0.371
    SpecialBuild: 8.0.0.371
    FileDescription: Crystal Reports ActiveX Designer Runtime Support
    LegalCopyright: Copyright (c) 1991-1999 Seagate Software, Inc. All rights reserved.
    LegalTrademarks: Copyright (c) 1991-1999 Seagate Software, Inc. All rights reserved.
    Comments: Crystal Reports for Visual Basic
    This component is from the year 2000 and needs to be updated. I searched our old cases and found several where old version of this component caused the same heap corruption.
    Please help as this is a production issue. Please let me know if you need any more information.
    thanks and regards
    sudatta soman

    Something must have changed. Were any patches or auto updates done to the OS?
    CR 8.0 has been out of the support cycle for some time now.
    As Microsoft suggested please log in and download the patches for CR 8.0 from:
    https://www.sdn.sap.com/irj/sdn/businessobjects-support
    If that does not resolve the issue the only option will be to schedule sn IIS restart each night.

  • Report script execution is getting failed

    Hi ,
    We are facing one strange issue while executing the Essbase report script. I am new to the report script and I am not getting how to resolve the issue.
    When we are changing the year in code from FY13 to FY14 the script is getting failed however the same script is successfully generating the report if we keep year as FY13 in code.
    Could you please let me know where would be the problem , below is the part of the code form Report script.
    {MISSINGTEXT "0"}  // replace #Missing with 0
    <Link ((<LEV("Customer", "Lev0,Customer")) AND ( <IDESC("All Customers")))
    <Link ((<LEV("Product", "Lev0,Product")) AND ( <IDESC("All Products")))
    <Link ((<LEV("Period", "Lev0,Period")) AND ( <IDESC("YearTotal")))
    FY14

    Hi ,
    I am getting below error message.
    "Report Script execution Failed. Please see message panel for details " and in message panel It is not showing any details , just displaying Execute Report script Failed with date and time details.
    I also checked that FY14 do exist in the application and no duplicate FY14 member exist in the outline.
    Could you please suggest where would be the problem.

  • Format in Report Schedulling

    Hi Gurus,
    I am using Report Scheduling Functionality of SAP. But the report which i am getting is not in appropriate format.
    Please tell how can i change the layout of Scheduled report which can be fitted in Excel?/
    Please revert asap.
    Thank You

    Hello,
    Please describe more what is the transaction code you are using, what is the output etc.
    What error it is giving when downloaded to excel.
    Regards,
    Ravi

Maybe you are looking for