CUMA Support for BlackBerry KEPLER 9300 and BlackBerry BOLD 9780 models

Hi Community,
Does anyone has any information if Blackberry KEPLER 9300 and BOLD 9780 models are supported by Cisco Mobility Advantage?
Thanks in advance.

Hi,
Right now CUMA doesnt support both these devices of Blackberry,
However you can find the list of Balckberry devices which is supported by CUMA in the following link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cuma/CUMA_CUMC_Compatibility_Matrix.html#wp98582
Regards
Rajamani
P.S: Rate Helpful Posts

Similar Messages

Support for operating system to load blackberry 8900

support for operating system to load blackberry 8900 javelin completely blank blank with no operating system and tries to desktop manager and nothing it can not reach by connecting with jvm and stops saying conmpletar could not load due to a connection of several steps someone could help me
Solved!
Go to Solution.

claudia_0080 wrote:
does not work
But it does.
Your three word response lacks any clue to any error or issue you encounted, let along a civil thank you.
We're willing to help, but you need to cooperate.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Between the Blackberry Curve 3G and the Bold 9700

I am confused between the Blackberry Curve 3G and the Bold 9700. Please guide me with the difference in features,options,performance,display.... which one is advisable...

The 9700 has 3g
9700 has a better camera and a flash
9700 has GPS
http://na.blackberry.com/devices/compare/
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is there Camera RAW support for Lightroom 4.4 and Canon 7D Mark ii?

I need Camera RAW support for Lightroom 4.4 and Canon 7D Mark ii. Is there a Camera RAW version for me?

Thanks for your help. I checked out DNG on YouTube and understand more
about it. I downloaded the DNG converter and transferred in files from my
camera. Then I imported into Lightroom. It works! Thanks again.
On Wed, Nov 19, 2014 at 5:56 PM, Jeff Schewe <[email protected]>

Hebrew support for nano 2nd gen and ITunes

Hi,
I have a new ipod nano. I've installed ITunes, and all my hebrew named files are being displayed with strange font (Giberish)
Is there any way to get hebrew fonts support for the ipod nano and the ITune 7.0 software ?
Dani

I know that this question has been asked before on these forums. Have you done a search for this regarding Hebrew on these forums? Although the links provided above do not offer support for the nano. Have you tried doing a search on google for a possible solution to your question. It might be good to leave feedback regarding support for hebrew text for the ipod at the link below.
http://www.apple.com/feedback/ipod.html
GFF

To Bentley Wolfe, Adobe, re: Locked [ADOBE FYI] : Getting Support for Flash Player 10 and Issue Tracking post

Hi Bentley,
I wanted to tell you that an important link you posted does
not work and says "Sorry, this page is not available".
It is in your post entitled "Locked [ADOBE FYI] : Getting
Support for Flash Player 10 and Issue Tracking post", and is at
http://www.adobe.com/cfusion/webforums/forum/messageview.cfmforumid=44&catid=184&threadid= 1400586&enterthread=y.
The link that is non-functional is "If you have issues
installing Flash Player 10, first troubleshoot your issues using
http://www.adobe.com/support/flashplayer.
Read the technotes, do some testing.".
I just wanted you to know, since you have gone to all of the
effort of posting it. I apologize for having to start a new thread,
but I was unable to post to your thread, since it is locked and
read-only.
This is the issue I am dealing with myself, and desperately
need help with. :)
Thank you so very much,
Karen

Hi Bentley,
I just noticed something. The link that I pasted, to your
post, does not work either. I noticed why, however, and it seems to
be why the link in your original page does not work, and why the
link in my post that goes to your post does not work.
It seems to be that if a link has a period after it (i.e., if
it is at the end of a sentence), the period is incorrectly included
in the "real" link. Somehow, whatever mechanism that processes the
post has a mini bug in it.
If you go to the link that is results in "Sorry, this page is
not available", and look up into the browser address bar, you will
see the period there each time.
I just thought that I would point this out, too, so that the
web techs in charge of the workings of the forums could look into
it.
Here is the original link, without a period after it, to your
original page.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=44&catid=184&threadid =1400586&enterthread=y
Thank you again,
Karen

How can I install asian script for language support for bangla in safari and install a font??

how can I install asian script for language support for bangla in safari and install a font? Some websites are working fine in ipad and iphone4 but not in mac osx supported imac or macbook. Example: www.sonarbangladesh.com.

You just need to install a font, like one of these:
https://sourceforge.net/projects/onkur/
http://www.ekushey.org/?page/osx
For non-Unicode sites, see
http://m10lmac.blogspot.com/2011/04/reading-non-unicode-indic-language-web.html

[SOLVED]Support for cores revision 0x17 and 0x18 disabled...

Everything is perfect on my arch linux setup except the following message I get at boot
Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
Help please
EDIT: After some googling I found a spanish website and did the following
Uncommented '#RuntimeWatchdogSec=0' in /etc/systemd/system.conf
And now it finally stfu. I've also added in the boot parameters after quiet splash loglevel=3
Last edited by sexyzero (2013-10-01 12:13:04)

I did, you linked to it already
I slightly modified modemmanager-git in the AUR and added some dependencies, the git version now works for me.

Blackberry Desktop Software and Blackberry bold 9780

I am trying to synchronize my blackberry to Outlook but I am getting this error.
Synchronization Error: A program error occurred at line 41 in .\OLTransUtil.cpp. Please report this error by sending a log to technical support.
23:52:53.015 Logging Verbosity Set To '2' - Logging Enabled
23:52:53.016 SyncAPI logging for product
23:53:41.843 SyncObject:tartSync
23:53:41.868 Synchronization Thread Running
23:53:41.868 Sync Engine Starting
23:53:41.883 Starting Loading Contracts
23:53:41.883 Ending Loading Contracts
23:53:41.883 Starting Translator Verification
23:53:41.894 Ending Translator Verification
23:53:41.894 Starting App Validation
23:53:41.947 COLTransUtil::InitializeOlAccess - Exception was thrown from COlAccess constructor.
23:53:41.947 Error Information: 14005 (000036b5) (KnownErrorWithLocalizedText), Description: A program error occurred at line 41 in .\OLTransUtil.cpp. Please report this error by sending a log to technical support., File: .\OLTransUtil.cpp, Line: 41
23:53:41.947 Ending App Validation
23:53:41.951 Sync Engine Completed (14005)
23:53:41.951 Sync completed at 11:53:41 PM on 07/02/12
23:53:41.951 Sync completed at 11:53:41 PM on 07/02/12
Any help would be appreciated.

Hello,
You seem perhaps to already have tried at least some of what is discussed in this thread, but I cannot tell if you've truly tried it all...therefore, I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Otherwise, it really sounds like you have some major conflict or issues with your Windows OS itself. While quite rare, it's not unheard of needing to completely reinstall Windows so as to get things working well. But, before you resort to that, you should do all of the normal Windows stuff -- Windows updates, check all of your apps for updates, run registry cleansers, run full virus scans, run malware detectors, etc. etc. etc. This very much sounds like a PC/Windows problem more than a Desktop Software problem.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

New Blackberry...and Blackberry Groups.

I started a Blackberry Messenger 5.0 group. I had posted the Bar-code so people could join. Well, work gave me a new blackberry. When I tried to set up the backup for Messenger, it said that it was already set with my e-mail address.
So, I wipe the old one, set up the new one and do a restore for my BBM. It said that I don't have a backup...so...I rescan the bar-code and now it's waiting for verification.
Problem is...I was the admin of the group...so how do I verify myself in my own group?
Solved!
Go to Solution.

Start a new group, similar name, and invite the others over. Tell the last one in the old Group to burn it down.
And make someone else besides yourself an Admin of the new group
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do I get support for Windows 7 on, and a W7 backup disk for, my new ThinkPad?

I know these have got to be stupid questions, since I am sure that they have to have been asked before (unless they are clearly explained somewhere that everyone else has found, and I am somehow completely missed it), but I did search the forums and was surprised NOT to find any info on getting Windows 7 technical support after it was factory installed in a month-old Thinkpad. I wonder if the apparent defects in my W7, or maybe a different problem in my browser, could be affecting my ability to search to forums?
I believe that my Windows 7 is defective, but calling Lenovo, they just talked about reinstalling Win7 from the partition, which makes no sense, if my W7 copy is defective, wouldn't the copy in the partition be defective too? My mom said she ordered a $20 W7 backup disk with the PC, but I never received it, and now Lenovo tech tells me those aren't actually available, and she must have confused it with the W7 upgrade disk, which didn't sound right, since I thought the upgrade disk was over $100, and I never received that one either anyway. If the W7 that was factory-installed is defective, I am assuming it's a copy of the same one in the partition, so that partition recovery is not feasible, is there any way to reorder a W7 re-install disk that will still register as Genuine Windows 7 on a Thinkpad? Now when I search the Lenovo site, I cannot find ANY W7 disks of any kind, neither a backup for factory-installed W7, nor for upgrade from a prior Windows version. Does anyone know how I could go about re-ordering the W7 backup disk when it appears to be missing from the online catalog? Unless this too is a defect in my browser search: can someone give me the link to page where I could select and re-purchase a W7 backup disk?
It has been a few years since I had a new PC, but I have never even heard of one before that did not come with instruction manuals and OS and support disks, and did not provide any tech support for its own factory-installed software or Windows, at least during the first few months of ownership. Where do new Thinkpad owners turn for individual W7 software support, since Microsoft swears it is Lenovo's responsibility to support W7 under its OEM license, yet Lenovo swears they only support hardware? It almost seems that new users are expected to know everything already, or be initiated enough with the product to know exactly what your problem is and what's causing it, in order to find an online fix. Who do you call if W7 or Lenovo software (but not an ISP issue) appear to be doing something to prevent online access, but there are no discernible hardware issues? Where do you call for individualized W7, as well as Lenovo software, support, especially after no one online has ever heard of your specific issues and has no workable ideas for fixing them, or when your problem prevents you from getting online at all?
Thanks so much

http://www.apple.com/support/bootcamp/
Boot Camp Assistant is already on your computer. You just need to buy Windows. Read the instructions and help files very carefully. Back up your data before taking on this task.

Dropping support for Internet Explorer 8, and Firefox 20.x or below

Starting April 30th, we will discontinue support for all Internet Explorer 8 versions and all Firefox 20 versions and below. In order to continue using Business Catalyst Admin user interface without problems, you and your clients need to upgrade to a more recent browser:
Download Internet Explorer
Download Safari
Download Chrome
Download Firefox

Thanks for your reply Shay.
We plan to officially support IE8 with the next patch release to JDeveloper 11g - currently planned for later this year.That matches what I wrote in my initial post in this forum thread about IE8 support.
We usually only certify browsers after they officially go production.That does not really answer my question (q1) in this forum thread.
It is more like, how can I assess that Oracle will support any successor(s) of IE8 or successor(s) of any currently supported browsers for ADF 11g applications in the future? How long will Oracle support "commonly used browsers" for an ADF 11g application I build today, so how long will I be able to use that application?
How do I answer such questions for ADF 11g applications that should be deployed on the internet (where, as some extranet environments, you typically have not that much (or no) control over which browsers your users use ... although some would like to argue with that, see forum thread "ADF Faces RC browser support and browser market share")?
(By the way, do you have any feedback for the forum thread "ADF 10g support for Internet Explorer 8"?)
regards
Jan

DAQmx Error: Non-buffered hardware-timed operations are not supported for this d evice and Channel Type.

Hello,
I am new to NI and to data acuasition cards in general. I am trying to put an application togather that would play large audio file using NI9263.
And i am getting the following error.
DAQmx Error: Non-buffered hardware-timed operations are not supported for this device and Channel Type.
Status Code: -201025
Does my hardware support buffering ?
can i use the EveryNSamplesCallbackAO function ?
Any sample code, will be helpful at this time. Thanks.

Hi yma200,
Are you using a USB 9263? If so, this might be of help:
http://digital.ni.com/public.nsf/allkb/EC1968728E660B288625780700570D06?OpenDocument
If it doesn't help, can you please post the code that you have that is causing your error?
Regards,
Bogdan Buricea
Applications Engineer
National Instruments

Support for Olympus E-510 and E-410

Hi,
Will the upcoming 1.1 update provide support for the new Olympus E-510 and E-410? If not, when can this support be expected?
Jim

This page shows all the supported formats.
Lightroom 1.1 will support all those in ACR 4.1
http://www.adobe.com/products/photoshop/cameraraw.html
Richard Earney
http://inside-lightroom.com

Support for Olympus E-620 and Lens

I don't see any support for Olympus in ACR 6.2. Where is it?

The camera itself is supported. That means it is possible to work on the raw files in Camera Raw. But there is no support for the lens. That is a different profile. It will be necessary for you to wait and see if the profile is eventually provided, create one yourself, or see if there is one available online.
percyflewfirst wrote:
I am looking in ACR under lens corrections > profiles. No Olympus listed there.

CUMA Support for BlackBerry KEPLER 9300 and BlackBerry BOLD 9780 models

Similar Messages

Maybe you are looking for