Cummulative and non cummulative

Hi all,
Can we add cummulative and non cummulative keyfigure and send that result to datatarget.
Is it possible to do addition non-cummulative and cummulative
Regards
Narendra

Hi reddy,.
Yes, you can.
Cumulative KF at query level are same as non cumulative.
Cheers
Raj

Similar Messages

Cummulative and non cummulative cubes

Hi
what is the difference between cummulative and non cummulative cubes and key figures

hi
check this...
http://help.sap.com/saphelp_bw32/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
also see the thread for example,
Non-Cumulative keyfigure example
cubes which have cummulative key figures are cummulative cubes.
hope it helpss..
cheers..
Message was edited by:
tarun bafna

Cumulative key figure and non cumulative key figure

Hi BW Expertz
Could any one give me the clarification about cumulative and non cumulative key figures .Why we go for cumulative key figure and non cumulative key figure.If any docs could u just mail to the following [email protected]
Thanx In advance
Best regards
sankar prasad

Cumulative values are those key figures (KF) that are cumulated using all characteristics, thus also using time.
Ex: Sales revenue, Quantity....
Non-cumulative values are those key figures that are measured in relation to a period in time; they cannot be meaningfully cumulated over time. Non-cumulative values are summarized over time using so called exception aggregation.
Ex: Number of employees, Inventory, Stock prices, Account balance,.....
AGGREGATION TAB
Non cumulatives are evaluated by non-cummulative values. Non-cummulative values are special key figures that are different from other key figures (cummulative values) in data transfers and saving as well as in aggregational behaviour. These are measured in relation to a period in time; that is to say, they cannot be meaningfully cumulated over time. Non-cumulative value are summaraized over-time using exception aggregation.
Non-cumulative values such as 'number of employess' are cumulated using characteristics such as 'cost center'. It does not make any sense, however, to cumulate the number of employees using different periods. The result at the end of any particular period would be the sum total of number of employees for each posting during the period. This would of course be wrong.
Instead, the aggregation of the KF can be defined as exception aggregation wherein an additional references characteristics is utilized to tell BW which value to use during the period, in this case, 0CALMONTH is used, in the above example, to indicate that only the last value of 0HEADCOUNT, updated by costcenter, is to be taken for any calender year and month.
Cummulative vs Non-Cumulatives
The purpose of non-cumulatives is to optimize the data transfer in BW, the data retention and the database access. The data transfer from OLTP to BW is minimized and only the meaningful data is saved and processed.
It is recommended that you use non-cumulative values for areas that dont change frequently such as warehouse stock or number of employees.
Non-cumulatives are modeled in BW using a non-cumulative value with the fields belonging to it for storing the non-cumulative or for inflows or outflows.
Non-cumulative values are stored with special KF that differ in terms of data transfers and aggregational behaviour.
Features of NON-Cumulative Values Transfering and Saving Data:
- NC values are mapped uisng one KF for NC changes or two KF for inflows and outflows.
-NC are transferred in an initialization run and the change runs that follow (initialization can also be omitted here)
- A non-cumulative value always has a time-related exception aggegation.
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/d2/e0173f5ff48443e10000000a114084/content.htm
with Example
Re: Non-Cumulative keyfigure example
Re: Types of non-cumulative keyfigures
/community [original link is broken]
/community [original link is broken]?forumID=131&threadID=29557&messageID=273049
/community [original link is broken]?forumID=131&threadID=111914&messageID=1248243
****Assign Points If Useful*********

Difference between Snapshot scenario and non cumulative scenario

Hi,
Can any one please tell me the difference between snapshot scenario and non cumulative scenario in
inventory management.
Also please give example. I read the pdf " how to handle inventroy management scenarios", but can any one please give some easy to understand examples.
full points guaranteed-

hi,
In Non-cummulative method your stock movements are stored in the cube (inflow and outflow of NC KF) and the Total stock is calculated during query execution. Hence if there are lot of movements in the stock for the period you want to report on, query will take long time to execute.
In case of Snap shot scenario Stock movements are not loaded to cube. you use ODS to load the status of the stock and then from ODS you can load to Cube once in a month. So only summarized data will be availabe in Cube. Reporting will be fast.
Check the below threads
Inventory Management - SnapShot model
snapshot scenario?
SNAP SHOT Scenario in IM

Cumulative and Non-cumulative KFs

Guys,
so I am confused about cumulative/Non-cumulative keyfigures. I read what it says about them on help.sap.com
Flow/non-cumulative value
You can select the key figure as a cumulative value. Values for this key figure have to be posted in each time unit, for which values for this key figure are to be reported.
Non-cumulative with non-cumulative change
The key figure is a non-cumulative. You have to enter a key figure that represents the non-cumulative change of the non-cumulative value. There do not have to be values for this key figure in every time unit. For the non-cumulative key figure, values are only stored for selected times (markers). The values for the remaining times are calculated from the value in a marker and the intermediary non-cumulative changes.
Non-Cumulative with inflow and outflow
The key figure is a non-cumulative. You have to specify two key figures that represent the inflow and outflow of a non-cumulative value.
For non-cumulatives with non-cumulative change, or inflow and outflow, the two key figures themselves are not allowed to be non-cumulative values, but must represent cumulative values. They must be the same type (for example, amount, and quantity) as the non-cumulative value."
and also checked a few threads on sdn but still a little confused about their purpose.
Can someone tell me when do we use which one?
Thanks,
RG.

Hi Ram,
Cummulative & Non Cummulative Key Figures :
Basically the key figures are of two types cumulative and non cumulative.
Cumulative are the normal one which you use always and they always bring the new values of the key figures in the delta that is if suppose A has value 10 and after change the new value is 20 then you will use cumulative key figures there, and your delta( new value) will bring 20.
but suppose your key figures field only the change in the prior value that is in this case the delta in the key figure value will bring 10 (20-10- change of 10 )as new value in the key figure A then you will have to model it through the non cumulaitve key figures.
Now
1) Cumulative is for the first case that is if the key figure alwyas brings the new values of the key figure and not the change sin the key fiures value.
2)NCum. value with NCUM value change:
In this case ther is only one field which brings the changes for a particualr key figure and you ahve to define that key figure as non cumulative.
Ex: In case of stock only one filed brings both ingoing value and outgoing value so 10 ,-4,100,-34.....
In this case you will this option and use the key figure here in the space provided.
3) In this case you haev two separate key figures one for the inflow of stocks and one for the outflow of the stocks.
you use one key figure for the inflow and one key figure for the outflow.
The main key figure autiomatically takes care of the logic and gives the correct output upon the summation
net value of stocks( inflow- outflow).
Also do remember in this case the key figure for inflow and out flow are the basic key figures that is cumulative key figures.
A non-cumulative is a non-aggregating key figure on the level of one or more objects that is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory. here the aggregation of key figure is based on the another info object
There are two different ways to define non-cumulative key figures:
u2022 Non-cumulative key figure with non-cumulative changes:
Before you can define the non-cumulative key figure, an additional cumulative key figure containing the non-cumulative change must exist as an InfoObject.
u2022 Non-cumulative key figure with inflows and outflows
There has to be two additional cumulative key figures as InfoObjects for non-cumulative key figures - one for inflows and one for outflows. The cumulative key figures have to have the same technical properties as the non-cumulative key figure, and the aggregation and exception aggregation have to be SUM.
Features of non-cummulative key figures
A non-aggregating key Figure.
Records are not summarized for Reporting
Exception Aggregation is being applied on these key figures on the level of one or more info objects usually with time .
Examples: Head Count, Account balance, Material stock
consider simple senario
Date Net Stock Quantity Sales Revenue
01.02.2005 40 1000
02.02.2005 50 2000
03.02.2005 25 3000
this is the query output if stock quantity has treated as cummulative and non-cummulative key figures
if stock quantity taken as a cummulative key figure
Date NET STOCK QUANTITY SALES REVENUE
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 100 6000
in the above result the key figure has aggregated to the total value that wont give sense to the net stock quantity
if stock quantity taken as non-cummulative key figure
Date Net Stock Quantity (LAST) Sales Revenue
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 20 6000
Hope it helps you.
Thanks & Regards,
SD

Difference between cumulative and non-cumulative key figures

Hi,
What is the difference between cumulative and non-cumulative key figures and under what conditions they are used. What is snapshort and where it is used.

Hi.............
Basically the key figures are of two types cumulative and non cumulative.
Cumulative are the normal one which you use always and they always bring the new values of the key figures in the delta that is if suppose A has value 10 and after change the new value is 20 then you will use cumulative key figures there, and your delta( new value) will bring 20.
but suppose your key figures field only the change in the prior value that is in this case the delta in the key figure value will bring 10 (20-10- change of 10 )as new value in the key figure A then you will have to model it through the non cumulaitve key figures.
Now
1) Cumulative is for the first case that is if the key figure alwyas brings the new values of the key figure and not the change sin the key fiures value.
2)NCum. value with NCUM value change:
In this case ther is only one field which brings the changes for a particualr key figure and you ahve to define that key figure as non cumulative.
Ex: In case of stock only one filed brings both ingoing value and outgoing value so 10 ,-4,100,-34.....
In this case you will this option and use the key figure here in the space provided.
3) In this case you haev two separate key figures one for the inflow of stocks and one for the outflow of the stocks.
you use one key figure for the inflow and one key figure for the outflow.
The main key figure autiomatically takes care of the logic and gives the correct output upon the summation
net value of stocks( inflow- outflow).
Also do remember in this case the key figure for inflow and out flow are the basic key figures that is cumulative key figures.
A non-cumulative is a non-aggregating key figure on the level of one or more objects that is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory. here the aggregation of key figure is based on the another info object
There are two different ways to define non-cumulative key figures:
Non-cumulative key figure with non-cumulative changes:
Before you can define the non-cumulative key figure, an additional cumulative key figure containing the non-cumulative change must exist as an InfoObject.
Non-cumulative key figure with inflows and outflows
There has to be two additional cumulative key figures as InfoObjects for non-cumulative key figures - one for inflows and one for outflows. The cumulative key figures have to have the same technical properties as the non-cumulative key figure, and the aggregation and exception aggregation have to be SUM.
Features of non-cummulative key figures
A non-aggregating key Figure.
Records are not summarized for Reporting
Exception Aggregation is being applied on these key figures on the level of one or more info objects usually with time .
Examples: Head Count, Account balance, Material stock
consider simple senario
Date Net Stock Quantity Sales Revenue
01.02.2005 40 1000
02.02.2005 50 2000
03.02.2005 25 3000
this is the query output if stock quantity has treated as cummulative and non-cummulative key figures
if stock quantity taken as a cummulative key figure
Date NET STOCK QUANTITY SALES REVENUE
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 100 6000
in the above result the key figure has aggregated to the total value that wont give sense to the net stock quantity
if stock quantity taken as non-cummulative key figure
Date Net Stock Quantity (LAST) Sales Revenue
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 20 6000
Hope this helps you..............
Regards,
Debjani................
Edited by: Debjani Mukherjee on Sep 15, 2008 7:22 AM

SSO for SAP and Non-SAP applications without Enterprise Portal

Dear all,
Is it possible to implement SSO for both SAP and non-SAP applications without involvement of EP at all?
I have gone through this link.
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/e5/4344b6d24a05408ca4faa94554e851/frameset.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/e5/4344b6d24a05408ca4faa94554e851/frameset.htm</a>
But I still i am not able to get the precise answer on how to enable SSO for both SAP and non-SAP applications without EP.
We have decided not to implement EP in first phase of SAP implementation. But we need to enable SSO for other SAP and Non-SAP applications.
A detailed description on how to deal this kind of scenarios will be helpful.
Thanks.

A client of our's uses SAP Enterprise Portal, and is using the SAP SSO, which is implemented with tickets, and requires the use of SAPSECULIB. My company provides an application for this client, and our application in hosted in our data center for the client, as a Software as a Service application, obviously across the internet. Our client, which owns a SAP license, has asked that we support the SAP SSO as a non-SAP SSO application. The client user's SSO ticket will be created from SAP EP, and then passed across the internet to our application, and we are to use that SSO ticket as an authentication ticket to our application. I beleive I know how to do this work technically, having reviewed the SAP document named: "Dynamic Library for Verifying SSO Tickets in Third-Party Software" Specification Version 2.00 December 2005.
My question is, does my company have the right to use the SAPSECULIB? Where is the official download and license download, that indicates we can download this library, and use it to support a SAP customer? We do not own a SAP license. Thank you for your help. I have searched many places in SAP support.

OWSM 10.1.3.4 and Non-SOAP XML-based web service

Hi all,
According to the OWSM 10.1.3.4 Administrator's Guide, "all Web services registered with an Oracle WSM Gateway are virtualized as both a SOAP and non-SOAP Web service." To access the non-SOAP (XML-only) web service, the documentation states "The non-SOAP virtualized URL can be determined from the virtualized SOAP URL by replacing the services keyword in the URL with the xml keyword."
For example, if the SOAP virtualized endpoint is:
http://host:port/gateway/services/SID0003001
then, the non-SOAP XML service endpoint is:
http://host:port/gateway/xml/SID0003001
I have several web services registered with an OWSM gateway, running on SOA Suite 10.1.3.4, and can access those without any problem. However, when I attempt to access the "/gateway/xml" version of these services, I simply get an HTTP 200 response header with a null body.
Does anyone have any ideas what could be causing this or what the secret is to get the non-SOAP XML service feature of OWSM to work?
Thanks!
--Gary

Hi all,
According to the OWSM 10.1.3.4 Administrator's Guide, "all Web services registered with an Oracle WSM Gateway are virtualized as both a SOAP and non-SOAP Web service." To access the non-SOAP (XML-only) web service, the documentation states "The non-SOAP virtualized URL can be determined from the virtualized SOAP URL by replacing the services keyword in the URL with the xml keyword."
For example, if the SOAP virtualized endpoint is:
http://host:port/gateway/services/SID0003001
then, the non-SOAP XML service endpoint is:
http://host:port/gateway/xml/SID0003001
I have several web services registered with an OWSM gateway, running on SOA Suite 10.1.3.4, and can access those without any problem. However, when I attempt to access the "/gateway/xml" version of these services, I simply get an HTTP 200 response header with a null body.
Does anyone have any ideas what could be causing this or what the secret is to get the non-SOAP XML service feature of OWSM to work?
Thanks!
--Gary

Key fields and non-key field of condition table

Hello Gurus,
what is key fields and non-key field of condition table?
thanks very much!

Key field
Each condition table contains keys that can be used for creating dependent condition records.
for example let take condition type PR00.
PR00 uses access sequence PR02 .
Access sequence PR02 has following tables associated with it namely 304, 305 & 306
When you create a conditon record for PR00 with transaction VK11 or VK31, you have a button 'key combination' which is nothing but fields associated with tables 304, 305 & 306.
In brief, Condition records are always created using specific keys. Condition tables are used to define the structure of the keys of a condition record.
Non key field
For example take condition table 144 - sales deal basic data.
Table 144 is associated with access sequence PBUD.
If you check the fields associated with this table (click technical view button), there are three fields at bottom which do not have 'key' check mark -KDATU, PLTYP, KSTAF
So, when you create a condition record for PBUD, system does not propose these 3 fields in 'key combination' and hence are non key fields.
Please reward points for good answers as this would help increase the total donation that SAP will make to the United Nations World Food Programme.

When playing games on my iPod touch. Some are stutters and non responsive

Trying to play games on my iPod touch and they are slow, stuttery and non responsive. iPod software is up to date

Do the games require an internet connection? If so then maybe slow connection.
otherwise:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

My yahoo e-mail not pushing to iPhone4, again. Had this same problem in October for several weeks. My kids and husband have 3 other types of smart phones, and none of them are experiencing this problems. This has been going on for 2 weeks so far.

My yahoo e-mail is not pushing to my iPhone4, again. Had this same problem for several weeks in October/November 2011. It's been a problem again for two weeks now. My kids and husband have three other types of smart phones, and none of them have had this problem. I'm NOT impressed. I've seen that others in the iPhone community have also been having this problem. Is Apple doing anything about it?

Read this: https://discussions.apple.com/message/17333604#17333604
It's a yahoo issue. Nothing you can do on your phone to fix it.

Report for Excisable and Non Excisable vendor

Hello
Is there any Std report is there....it can give us the list of Excisable and Non excisable Vendors based on the Perticular Purchase Orgnisation.
Regards
sapman man

Hi
I do not think in SAP this kind of report is available.
what you can do , if your vendor master has different accounting group for Excisable and Non excisable vendor then you can check in standard table of vendor master like LFA1 and LFM1 or create Z report or Query.
Awaiting your feedback.
Kishor Rudani

Connect b/w SAP and Non SAP -system

Hi All,
I have a requirement where i need to connect between a SAP system and Non-Sap System.
the front end is an E-Build tool (for construction Industry) from where the user will pick the data and the data should get store at the backend i.e in the SAP system.
E-build is a tool for construction industry with lots of flexible options for the user to check for their house, along with their prices.
These all data needs to be captured and store at the backend.
Can any one suggest me which method shall i go for this in ABAP(and How) or need to go for the XI-Netweaver or EP technology.
Thanks & Regards
Mona

you better to go for middleware tools . keep files( whichs contains data to be stored in SAP) in one folder at 3p systems and middleware adapters will pick that filles automatically and sent it to Application server or then process the data into SAP.
tks.. venkat

Difference between Valuated and Non valuated Sale order stock

Hi All,
Can anybody tell me the difference between the above said subject with the steps involved in each scenario.
That is valuated sale order stock and Non valuated sale order stock in Product cost by Sale Order.
With Journal entries at each step and whether any WIP or variances at Production order level and sale order level and all the financial entries related to them
Thanks in Advance,
Ravi Kumar

Hi Shail,
Thans for your inputs,
But I wanted to know it in more detail. In what scenarios they are used with financial entries in both the cases.
I will give you my scenario. It goes like this,
My client is in pipe coating business, who receives pipes from customers and does only coating work(which is considered as service) and despatches it to the customer. this process is carried on the basis of work order(Sale order).
Now Production order is created and work is done on that with reference to Sale order for that particular customer.
So the pipe which my client receives should be non valuated stock as it will not be a raw material to them and the cost incurred on it is booked on production order like chemicals as raw material consumption, activity cost etc.
now in this scenario just tell me how and at which stage FI entries get generated at Production order and Sale order level, and also at wat level Standard cost estimate should be created i,e at production order level or sale order level(sale order cost estimate).
Will there be any entries at goods isssue and GR against production order. If no then how the COGM account will get hit.
Please tell me this scenario in both cases Valuated sale order stock and Non valuated sale order stock with financial entries in Sale order costing.
Thanks & Regards,
Ravi Kumar

My Firefox crashes every time I open it and none of the steps in the database solve the problem. My crash signature is PaintFrame(nsIRenderingContext*, nsIFrame*, nsRegion const&, unsigned int, unsigned int)

I tried opening it in safe mode and none of the other help tips in the database on firefox crashes when I open it apply to me. I also ran a couple of virus programs to check for any infections and found nothing. I had been having issues with java previous to firefox beginning to crash. So I attempted to uninstall java from my computer but it did not help.
My crash signature is PaintFrame(nsIRenderingContext*, nsIFrame*, nsRegion const&, unsigned int, unsigned int) and a search of this term on Mozilla Support pulled up no results.
I'm not terribly knowledgeable with programming so any suggestions would help!

I read online about a "clean reinstall" of firefox which seems to have worked! They should include direction on this on their page: https://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it

Cummulative and non cummulative

Similar Messages

Maybe you are looking for