Cumulative and non-cumulative for key figure
Hi,
In the aggregation tab, we have the aggregate type SUM, Max or Min.
we also have the comulative/non-cumulative values.
what's the difference between comulative and non-cumulative values? it would be good to have some example for illustration. and does comulative and non-cumulative have any relation with aggregate type?
Many Thanks
Jonathan
Hi,
what's the difference between comulative and non-cumulative values?
Cumulative values are those key figures that are cumulated using all characteristics, thus also using time.
Example: sales revenue, weight, etc.
Non-cumulative values are those key figures that are measured in relation to a period in time; that is to say they cannot be meaningfully cumulated over time. Non-cumulative values are summarized over time using so-called exception aggregation.Example:stock quantities/-values, number of employees, account balances, etc.
Does comulative and non-cumulative have any relation with aggregate type?
Different types of non-cumulative keyfigures.....are....
1.Non-cumulativekey figure = cumulative keyfigure with excep.aggregation
2.Non-cumulativekey figure withassociated singledelta (cumulative)
3.Non-cumulativekey figure withassociated in-andoutflow(cumulative)
check these links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92c0aa90-0201-0010-17b1-bf5b11c71257
hope it helps...
Regards
chandra sekhar
Edited by: chandra sekhar t on Nov 28, 2008 2:18 PM
Similar Messages
-
Difference between cumulative and non-cumulative key figures
Hi,
What is the difference between cumulative and non-cumulative key figures and under what conditions they are used. What is snapshort and where it is used.Hi.............
Basically the key figures are of two types cumulative and non cumulative.
Cumulative are the normal one which you use always and they always bring the new values of the key figures in the delta that is if suppose A has value 10 and after change the new value is 20 then you will use cumulative key figures there, and your delta( new value) will bring 20.
but suppose your key figures field only the change in the prior value that is in this case the delta in the key figure value will bring 10 (20-10- change of 10 )as new value in the key figure A then you will have to model it through the non cumulaitve key figures.
Now
1) Cumulative is for the first case that is if the key figure alwyas brings the new values of the key figure and not the change sin the key fiures value.
2)NCum. value with NCUM value change:
In this case ther is only one field which brings the changes for a particualr key figure and you ahve to define that key figure as non cumulative.
Ex: In case of stock only one filed brings both ingoing value and outgoing value so 10 ,-4,100,-34.....
In this case you will this option and use the key figure here in the space provided.
3) In this case you haev two separate key figures one for the inflow of stocks and one for the outflow of the stocks.
you use one key figure for the inflow and one key figure for the outflow.
The main key figure autiomatically takes care of the logic and gives the correct output upon the summation
net value of stocks( inflow- outflow).
Also do remember in this case the key figure for inflow and out flow are the basic key figures that is cumulative key figures.
A non-cumulative is a non-aggregating key figure on the level of one or more objects that is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory. here the aggregation of key figure is based on the another info object
There are two different ways to define non-cumulative key figures:
Non-cumulative key figure with non-cumulative changes:
Before you can define the non-cumulative key figure, an additional cumulative key figure containing the non-cumulative change must exist as an InfoObject.
Non-cumulative key figure with inflows and outflows
There has to be two additional cumulative key figures as InfoObjects for non-cumulative key figures - one for inflows and one for outflows. The cumulative key figures have to have the same technical properties as the non-cumulative key figure, and the aggregation and exception aggregation have to be SUM.
Features of non-cummulative key figures
A non-aggregating key Figure.
Records are not summarized for Reporting
Exception Aggregation is being applied on these key figures on the level of one or more info objects usually with time .
Examples: Head Count, Account balance, Material stock
consider simple senario
Date Net Stock Quantity Sales Revenue
01.02.2005 40 1000
02.02.2005 50 2000
03.02.2005 25 3000
this is the query output if stock quantity has treated as cummulative and non-cummulative key figures
if stock quantity taken as a cummulative key figure
Date NET STOCK QUANTITY SALES REVENUE
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 100 6000
in the above result the key figure has aggregated to the total value that wont give sense to the net stock quantity
if stock quantity taken as non-cummulative key figure
Date Net Stock Quantity (LAST) Sales Revenue
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 20 6000
Hope this helps you..............
Regards,
Debjani................
Edited by: Debjani Mukherjee on Sep 15, 2008 7:22 AM -
Adding Cumulative and Non Cumulative Key Figure
Hi All,
Can we add Cumulative and Non Cumulative KF in a query and display the resuly.
regards,
JeetYes, you can.
Cumulative KF at query level are same as non cumulative.
Hope it helps.
regards -
Cumulative and Non-cumulative KFs
Guys,
so I am confused about cumulative/Non-cumulative keyfigures. I read what it says about them on help.sap.com
Flow/non-cumulative value
You can select the key figure as a cumulative value. Values for this key figure have to be posted in each time unit, for which values for this key figure are to be reported.
Non-cumulative with non-cumulative change
The key figure is a non-cumulative. You have to enter a key figure that represents the non-cumulative change of the non-cumulative value. There do not have to be values for this key figure in every time unit. For the non-cumulative key figure, values are only stored for selected times (markers). The values for the remaining times are calculated from the value in a marker and the intermediary non-cumulative changes.
Non-Cumulative with inflow and outflow
The key figure is a non-cumulative. You have to specify two key figures that represent the inflow and outflow of a non-cumulative value.
For non-cumulatives with non-cumulative change, or inflow and outflow, the two key figures themselves are not allowed to be non-cumulative values, but must represent cumulative values. They must be the same type (for example, amount, and quantity) as the non-cumulative value."
and also checked a few threads on sdn but still a little confused about their purpose.
Can someone tell me when do we use which one?
Thanks,
RG.Hi Ram,
Cummulative & Non Cummulative Key Figures :
Basically the key figures are of two types cumulative and non cumulative.
Cumulative are the normal one which you use always and they always bring the new values of the key figures in the delta that is if suppose A has value 10 and after change the new value is 20 then you will use cumulative key figures there, and your delta( new value) will bring 20.
but suppose your key figures field only the change in the prior value that is in this case the delta in the key figure value will bring 10 (20-10- change of 10 )as new value in the key figure A then you will have to model it through the non cumulaitve key figures.
Now
1) Cumulative is for the first case that is if the key figure alwyas brings the new values of the key figure and not the change sin the key fiures value.
2)NCum. value with NCUM value change:
In this case ther is only one field which brings the changes for a particualr key figure and you ahve to define that key figure as non cumulative.
Ex: In case of stock only one filed brings both ingoing value and outgoing value so 10 ,-4,100,-34.....
In this case you will this option and use the key figure here in the space provided.
3) In this case you haev two separate key figures one for the inflow of stocks and one for the outflow of the stocks.
you use one key figure for the inflow and one key figure for the outflow.
The main key figure autiomatically takes care of the logic and gives the correct output upon the summation
net value of stocks( inflow- outflow).
Also do remember in this case the key figure for inflow and out flow are the basic key figures that is cumulative key figures.
A non-cumulative is a non-aggregating key figure on the level of one or more objects that is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory. here the aggregation of key figure is based on the another info object
There are two different ways to define non-cumulative key figures:
u2022 Non-cumulative key figure with non-cumulative changes:
Before you can define the non-cumulative key figure, an additional cumulative key figure containing the non-cumulative change must exist as an InfoObject.
u2022 Non-cumulative key figure with inflows and outflows
There has to be two additional cumulative key figures as InfoObjects for non-cumulative key figures - one for inflows and one for outflows. The cumulative key figures have to have the same technical properties as the non-cumulative key figure, and the aggregation and exception aggregation have to be SUM.
Features of non-cummulative key figures
A non-aggregating key Figure.
Records are not summarized for Reporting
Exception Aggregation is being applied on these key figures on the level of one or more info objects usually with time .
Examples: Head Count, Account balance, Material stock
consider simple senario
Date Net Stock Quantity Sales Revenue
01.02.2005 40 1000
02.02.2005 50 2000
03.02.2005 25 3000
this is the query output if stock quantity has treated as cummulative and non-cummulative key figures
if stock quantity taken as a cummulative key figure
Date NET STOCK QUANTITY SALES REVENUE
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 100 6000
in the above result the key figure has aggregated to the total value that wont give sense to the net stock quantity
if stock quantity taken as non-cummulative key figure
Date Net Stock Quantity (LAST) Sales Revenue
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 20 6000
Hope it helps you.
Thanks & Regards,
SD -
Cumulative and Non Cumulative Keyfigures
Hi,
What are Cumulative and Non Cumulative Keyfigures..? and
what is the lik betwqeen these keyfigures and the option " NO MARKER UPDATE " in the manage tab of infocube?
Can you please tell eloborately?
Regards
Naresh.Hi,
Cumulative values are those key figures that are cumulated using all characteristics, thus also using time.
Non-cumulative values are those key figures that are measured in relation to a period in time; Non-cumulative values are summarized over time using so-called exception aggregation.
In Inventory, When you initialize the stock by using BX Data source. It will bring the current status of the stock by calculating the past transactions happens in all the storage locations.
After loading the Data into Cube you compress the cube with Marker update, then system will take a reference point for the marker. Next when you load BF for the historical data, you compress with "No marker update". This may not be necessary in all the cases. If the client requires reporting on the past data you need to extract this. This time you run the info package with init Delta. If historical data is not required you can run the info pack INIT t without Data transfer.
In the above case you use No marker update, because you have initialized the stock by calculating all the historical data and then you are loading historical data, there would be data mismatch happen to avoid that use no marker so that it will not add to the reference point. Later you can run the delta loads by using BF data source. This time you need to use "Marker update" because all the delta movements are new they should be updated to reference point. Similarly UM also With marker updated for Price revaluations. Why Reference point: When you use Non Cumulative KF in the Cube, During query execution the data will come from Reference point which is set by marker update
Regards, -
Cumulative and Non Cumulative KF
Hi all,
What are Cumulative and Non Cumulative KFs. How do we create it and where do we use them?
Thanks in advance,
SekharHai <b>Sekhar</b>...
Some of the Information Given Below......
<b>Key figures:</b>
1. Cumulative Vaules
2. Non Cumulative Values
<b>Cumulative Values</b>:
Cumulative Values are Keyfigures for which Keyfigure Values are must posted in every time unit that reported on (= time period specific Values).
Example:
Revenue
<b>Non Cumulative Values:</b>
Non Cumulative Values are Keyfigures for which KeyFigures are only evaluated for selected time Periods.
<b>Cumulative Keyfigures With Exception Aggregation</b>:
It's a 'normal' KF (with summation, min or max as aggregation behaviour), but you set some exception in this behaviour...for example, you can say that a KF, normally aggregated by 'summation', have to show the max value (or the average, or '0' or something else), that is the 'exception aggregation' when you use it in combination with 0DOC_DATE (or other char), that is the 'exception aggregation char reference'...in this case OLAP processor give to you the possibility to see your KF with different behaviour depending from you use 0DOC_DATE (in our example, MAX) or something else (SUMMATION).
<b>Non Cumulative keyfigure with Associated Single Delta:</b>
If you have a stock KF that is fed from only one (other) movement KF that can assume positive and negative sign.
KF1 (initial) STOCK (non-***.) = 100
KF2 flow = -30
KF2 flow = 70
KF1 (final) STOCK (non-***.) = 140
<b>Non-cumulative key figure with associated in and outflow:</b>
This is the case of 2LIS_03_BF KF stocks fields.
Here, we have the same situation in point 2, but you will have not only ONE flow KF, but TWO, one dedicated to in and another one dedicated to out !
You have to use this scenario if you have no KF that have positive and negative sign, but two KFs each one representing positive (in) and negative (out) logical sign!
KF1 (initial) STOCK (non-***.) = 100
KF2 (out))flow = 30
KF3 (in)flow = 70
KF1 (final) STOCK (non-***.) = 140
<b>Website Addresses For Non Cumulative KeyFigures:</b>
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.html
http://help.sap.com/saphelp_nw04/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.html
http://help.sap.com/saphelp_bw31/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.html
http://help.sap.com/saphelp_erp2004/helpdata/en/d2/e0173f5ff48443e10000000a114084/content.html
Re: Non-Cumulative keyfigure example
Re: Types of non-cumulative keyfigures
/community [original link is broken]
http://help.sap.com/saphelp_bw32/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.html
/community [original link is broken]?forumID=131&threadID=29557&messageID=273049
/community [original link is broken]?forumID=131&threadID=111914&messageID=1248243
<i><b>Assign Points If it Helps......</b></i>
<u><b>BalajeeKannan</b></u> -
Hi All,
What is the exact deff between cumulative and non cumulative?
give me a simple sceneriao it would be very helpful...?
thanks
kiranHI ,
Cumulative : Normal Key figures are cumulative
Example : Say Key figure X has on 15th you have Qty 20 & oon 16th you have Qty 10
So when you run the report you can see the value for X Kf as Qty 30.
So,here the values are cumulated
Non -Cumulative : Derivative of the two cumulative key figures showing in the New key figure is Non -Cumulative
Example: Non - Cumulative KF is Qty total stock
Qty total stock is the derivative of Qty Reciept Stock & Qty Issued Stock
Date Qty Receipt stock Qty Issue Stock Qty Total Stock
15th | 20 | 10 | = 10
16th | 10 + 15 =25 | 02 | = 23
Hope you can understand
Regards
Hari -
What is the difference between cumulative and non cumulative keyfigures?
Hi Friends
What is the difference between cumulative and non cumulative keyfigures, when we r using the cumulative and non cumulative
Regards
RavindraHi Ravindra,
Have a look at the help:
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Go through these.
Re: Types of non-cumulative keyfigures
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/content.htm
See the following threads
non-cumulatives KF in reporting
Re: use of non cumulative keyfigure
Re: When do we use Non-Cumulative values?
Key figures:
1. Cumulative Vaules
2. Non Cumulative Values
Cumulative Values:
Cumulative Values are Keyfigures for which Keyfigure Values are must posted in every time unit that reported on (= time period specific Values).
Example:
Revenue
Non Cumulative Values:
Non Cumulative Values are Keyfigures for which KeyFigures are only evaluated for selected time Periods.
Cumulative Keyfigures With Exception Aggregation:
It's a 'normal' KF (with summation, min or max as aggregation behaviour), but you set some exception in this behaviour...for example, you can say that a KF, normally aggregated by 'summation', have to show the max value (or the average, or '0' or something else), that is the 'exception aggregation' when you use it in combination with 0DOC_DATE (or other char), that is the 'exception aggregation char reference'...in this case OLAP processor give to you the possibility to see your KF with different behaviour depending from you use 0DOC_DATE (in our example, MAX) or something else (SUMMATION).
Non Cumulative keyfigure with Associated Single Delta:
If you have a stock KF that is fed from only one (other) movement KF that can assume positive and negative sign.
KF1 (initial) STOCK (non-***.) = 100
KF2 flow = -30
KF2 flow = 70
KF1 (final) STOCK (non-***.) = 140
Non-cumulative key figure with associated in and outflow:
This is the case of 2LIS_03_BF KF stocks fields.
Here, we have the same situation in point 2, but you will have not only ONE flow KF, but TWO, one dedicated to in and another one dedicated to out !
You have to use this scenario if you have no KF that have positive and negative sign, but two KFs each one representing positive (in) and negative (out) logical sign!
KF1 (initial) STOCK (non-***.) = 100
KF2 (out))flow = 30
KF3 (in)flow = 70
KF1 (final) STOCK (non-***.) = 140
Website Addresses For Non Cumulative KeyFigures:
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.html
http://help.sap.com/saphelp_nw04/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.html
http://help.sap.com/saphelp_bw31/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.html
http://help.sap.com/saphelp_erp2004/helpdata/en/d2/e0173f5ff48443e10000000a114084/content.html
Re: Non-Cumulative keyfigure example
Re: Types of non-cumulative keyfigures
/community [original link is broken]
http://help.sap.com/saphelp_bw32/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.html
/community [original link is broken]?forumID=131&threadID=29557&messageID=273049
/community [original link is broken]?forumID=131&threadID=111914&messageID=1248243
Check this very useful docu.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
****Assign Points If Helpful****
Regards,
Ravikanth -
Multicube with Cumulative and Non Cumulative Key Figures
Is there any problems if I build a Multicube which consists of InfoProviders which have non-cumulative key figures (Inventory cube) and those which do not
In the query I will be summing the key figure for example Stock Quantity across the InfoProviders? ThanksHi,
There is no problem if you do that only thing is when you assign key figures in the multiprovidesr you have to be careful in deciding the infoprovider from which the key figure comes.
Hope this helps
Assign points if useful
Regards,
venkat -
Combining cumulative and non cumulative Key fig in same report with Quarter
Hi there,
could someone please help with the following,
I need to define a query, with a Keyfig called Amount (cumulative) coming from Controlling Cube, and HR Head count(non cumulative) from HR cube. Need to display Quarters in columns, Amt and Head Count in Rows. User might want to expand quarters and should be able to see the amount/Head count values for each of Fiscperiods. Up to this point, I had my definitions made, everything seems good.
problem here is, structure defined for quarters is basically a formula that sum up each fiscperiods, so it is working for fine for the amount, but for head count, it should not sum up each period values, rather need to average.....How can I achieve this?
Any help is greatly appreciated.Thanks for your help.
My scenario kinda take an hr to explain, difficult to put it here on the thread.
to keep it simple, I need Head Count as LAST value with respective to calmonth, but need to have average with respective to Quarter. where I have defined the quarter as formula (mth1Variable Value Type + Mth1Variable Value type + mth2variable value type + mth2variable value type .....etc). So I could not set the aggregation as average in the formula. Rather I used cell definitions.
Thanks Again -
Adobe's use of SCUP and cumulative and non-cumulative updates
Seem to be having a problem with Adobe and their released updates for SCCM 2007 SCUP. Although each released update is added in to SCUP, there seems to be no logic working to correctly install the product (Flash or Reader are examples) so that SCUP
can correctly install from bare-bones to latest version, figuring out which updates need to be applied in the correct order.
I would think it could determine to apply the latest FULL version, then any non-cumulative updates in the correct order, but...that doesn't appear to be the case.
Is this a Microsoft issue, Adobe issue, or...working as designed, and you have to install EACH point upgrade, manually, as released?
Thanks.Although each released update is added in to SCUP, there seems to be no logic working to correctly install the product (Flash or Reader are examples) so that SCUP can correctly install from bare-bones to latest version, figuring out which updates need to
be applied in the correct order.
The key issue here is that the Adobe catalogs only contain *updates*; they do not contain full installers. Second, Adobe has been grossly inconsistent in whether updates are incremental or cumulative (at least with respect to Reader). The best approach is to
publish them all (well, unfortunately, you can't publish all of the Flash updates, but those at least, really are always cumulative).
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Cumulative and non cumulative cube
what is the diff bet
*** and non *** cube.
please suggest me
i will assign pointsHi Vishal,
Please go through this link.
http://help.sap.com/saphelp_nw04/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
Regards,
Praveen -
Cumulative key figure and non cumulative key figure
Hi BW Expertz
Could any one give me the clarification about cumulative and non cumulative key figures .Why we go for cumulative key figure and non cumulative key figure.If any docs could u just mail to the following [email protected]
Thanx In advance
Best regards
sankar prasadCumulative values are those key figures (KF) that are cumulated using all characteristics, thus also using time.
Ex: Sales revenue, Quantity....
Non-cumulative values are those key figures that are measured in relation to a period in time; they cannot be meaningfully cumulated over time. Non-cumulative values are summarized over time using so called exception aggregation.
Ex: Number of employees, Inventory, Stock prices, Account balance,.....
AGGREGATION TAB
Non cumulatives are evaluated by non-cummulative values. Non-cummulative values are special key figures that are different from other key figures (cummulative values) in data transfers and saving as well as in aggregational behaviour. These are measured in relation to a period in time; that is to say, they cannot be meaningfully cumulated over time. Non-cumulative value are summaraized over-time using exception aggregation.
Non-cumulative values such as 'number of employess' are cumulated using characteristics such as 'cost center'. It does not make any sense, however, to cumulate the number of employees using different periods. The result at the end of any particular period would be the sum total of number of employees for each posting during the period. This would of course be wrong.
Instead, the aggregation of the KF can be defined as exception aggregation wherein an additional references characteristics is utilized to tell BW which value to use during the period, in this case, 0CALMONTH is used, in the above example, to indicate that only the last value of 0HEADCOUNT, updated by costcenter, is to be taken for any calender year and month.
Cummulative vs Non-Cumulatives
The purpose of non-cumulatives is to optimize the data transfer in BW, the data retention and the database access. The data transfer from OLTP to BW is minimized and only the meaningful data is saved and processed.
It is recommended that you use non-cumulative values for areas that dont change frequently such as warehouse stock or number of employees.
Non-cumulatives are modeled in BW using a non-cumulative value with the fields belonging to it for storing the non-cumulative or for inflows or outflows.
Non-cumulative values are stored with special KF that differ in terms of data transfers and aggregational behaviour.
Features of NON-Cumulative Values Transfering and Saving Data:
- NC values are mapped uisng one KF for NC changes or two KF for inflows and outflows.
-NC are transferred in an initialization run and the change runs that follow (initialization can also be omitted here)
- A non-cumulative value always has a time-related exception aggegation.
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/d2/e0173f5ff48443e10000000a114084/content.htm
with Example
Re: Non-Cumulative keyfigure example
Re: Types of non-cumulative keyfigures
/community [original link is broken]
/community [original link is broken]?forumID=131&threadID=29557&messageID=273049
/community [original link is broken]?forumID=131&threadID=111914&messageID=1248243
****Assign Points If Useful********* -
Formula is not working for key figures ( cumulative )
hI
I have Qty A and qty B key figures and changed property to cumulative in query designer . two key figures are working fine . I ahve another key figure which is formula ( Qty A + Qty B) .
Issue is
Formula ( Qty A + Qty B) is showing before cumulative values result . it is not showing cumulative total .
Ex :
Before cumulation prperty for Qty A and Qty B
Qty A Qty B Total ( formula ( Qty A+ Qty B)
10 20 30
8 7 15
After changing propert cumulative in query designer for Qty A and Qty B
Qty A Qty B Total ( Formula 9Qty A + Qty B)
10 20 30
18 27 15 ( still it is show 15 like above example means formula is not working on cumulative values)
Formula is working on before cumulative value . it is not taking cumulative values.
Please helo to resolve this issue . I think I need to change some prperty in query designer.
Appriciate your response.
Thanks
RohanHi
Problem solved .
Thanks
Sree -
Cumulated Keyfigure and Non-Cumulated Keyfigure
Hi Guy`s,
Can we load Cumulative Key Figure and Non-Cumulative Key Figures in the Inventory InfoCube? Please explain with Scenario Urgent client requirement.
thanks in advance,
Venkat.Hi,
Check the following link.
How To Handle Inventory Management Scenarios in BW
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
Cheers
Pagudala
Maybe you are looking for
-
Creation of a table with static data(not a DB table)
Hi I need to display a table with some static data in an OAF page. This table is not a DB table. It is like an HTML table I have placed the following query SELECT 'A1','B1' FROM DUAL UNION SELECT 'A2',B2' FROM DUAL in the VO. But it is returning a si
-
Error when sending INVOICE01 iDoc to SAP R/3 system
Hi, I was trying to send an INVOICE01 iDoc to SAP R/3 system. I checked the iDoc list (transaction code we02), the iDoc I sent was in the status 51 with the error message as "Program parameters LS <Logic System Name> <Company code> have not been set"
-
Logic Pro X 2013 delete custom loops
How do I delete custom loops from both my library and the UI?
-
Multiple Account Assignment in PO
Dear, All Experts. I want to keep multiuple account assignmen in PO, however I think it is not possible as I see in Item Level only one option is there. I want to maintain WBS & Internal Order Display OR Mandatory field in PO. My real account assignm
-
How to completely remove MAPS (smart2go) on N95?
How can I permanently remove 'MAPS', not the maps downloaded but the 'MAPS' by smart2go/nokia completely? I am asking since I have no intention to purchase navigation licenses from smart2go or openbit or nokia since Manila is not detailed. I purchase