Cumulative Individual Capacity in CM01

Hello All,
can anyone let me know how do i get Cumulative Individual Capacity for a workcenter and a plant as i am getting in CM01 tcode.
Actually i am writing a method with import parameters as workcenter , plant, start_date and end_date.
and i need to fetch all the avaliable capacity for that workcenter for the given dates .
but the output should be same as when i check from tcode CM01 for Cumulative Individual Capacity .
I hope i am clear ....
Regards
Ravi Aswani

Dear ,
Bssically , it goes from KBEZ Add. data for table KBED -CRHD(Work Centre )-AUFK/AFVC(Operation details at Production Order ) .
Refer this thread : PP Tables
Individual Capcity comes from Work Center Addtional Capacity Tab and seats into Operation Overview of Production Order .
Hope it clarifies
Regards
JH

Similar Messages

Capacity planning requirement by individual capacity wise

Is it possible to get the report of capacity planning requirement by individual capacity wise. (Individual capacities assigned to work center).
I have checked Tcodes CM01 to CM07, but unable to get the same.

Hi
What i understand from your query is you want Individual capacities to work center means report as per capacity category wise..
In CM01 go to menu select Planning->selection-> capacity category wise enter your capacity category, slection list window will appear, click Detailed Capacity List...
Regards,
MSH

Process order confirmation at individual capacity level

Hi Guys,
I want to select the individual capacity of the resource while confirming the process order , is it possible if possible please enlight me how to do the same?
Thanks and regards
Thamizhchelvan G

Is HU enabled for your location? if that case, you could post by pallet.

Table for Individual capacity of Workcenter

Hi friends,
I am working on one requirement for which I need table which is used for storing 'Iindividual capacity' . I could not find the table. Please help.
I am not intrested in Capacity table like KAKO , need table for 'Individual capacity' (which we do enter on cap header screen of work center - goto - individual capacities)

Hi,
you can get the Individual capcity in following table for work center.
KAPA - ANZHL
   KAZY - ANZHL
   LDLBC -AZNOR
Regards,
Sundaresan

Can we give name to individual Capacity

If yes where we can give it
in cm27 we have idividual capacity wise capacity planning table, so where to give name to that one.
in cm27, left clomn individual capacity colomn is there.
as we are defining IN. Capacities in work center ny numeric no. in capacity view, but I want to give name to individual capacities.
Help Me Out
Thanks Gurus
Edited by: Samir Momin on Mar 20, 2009 12:18 PM

Hi
You create capacity using Tcode CR11.
Capacity name
Description by which the capacity (for example, a machine capacity, a labor capacity or a move capacity)
is to be created in the system (when creating the capacity) or
is known in the system (when changing, displaying or using the capacity).

Plant Maintenance: Capacity planning CM01/ CM07

Hi
In capacity planning CM01, the standard sap shows all the maintenance orders which have system status created. But we would like to look at onlly the released pm order in the standard overview list and detailed capacity list. Please let me know if there is way we can configure it.
Thanks

Hi Nayan202,
You could configure desired "selection set" T.code "CSM1" and then assign this to appropriate "Selection Profile" under initial set.
Hope this helps.
Shahnawaz

Maintenance Work Center : Capacity Planning CM01

Hello Gurus,
We are using T-code CM01 to determine the Requirements / RemAvailCap of the Maintenance Work Orders in a given Maintenance Work Center.
After executing CM01, the detail capacity list contains Not Scheduled orders( CRTD )and capacity of these not Released orders also taking into consider.
How to restrict CM01 Order selection based on the work order System status or User status ?
I found below discussions on SCN but couldn't get precise answere.
Plant Maintenance: Capacity planning CM01/ CM07
Configuring profiles in CAPACITY PLANNING (CM07)
Please help.
Thanks in Advance
Ashok M

There are a few ways:
Create a new status profile via BS42 and assign the REL status only (see image 1). Then in the CM01 display screen, use menu path: Planning->Selection->Order and enter the status profile created above (see image 2)
Create a new selection combination via OAP0. In the CM01 display screen, use menu path: Planning->Selection->Combination and enter the selection combination created above (see image 3)
The above settings can then be defaulted via the various capacity planning profiles.

Individual capacity is not taken into account

Hello,
I have the following situation:
A work center (workers) works 8 hours per day, and consists of 3 workers (3 individual capacities).
So, it provides 24 hours capacity per day.
Now, I want to (automatically) dispatch operations via the dispatcher with a finite, forward scheduling strategy.
Lets say we have 4 operations, each of which requires 8 hours. Which means a total capacity requirement of 32 hours.
When I use the dispatcher it dispatches all 4 operation to the same day, which is, ofcourse "impossible". I would expect the 4th operation to be scheduled for the next day.
Has anyone encountered such a problem? What would you advise please?
Regards,
Doron Oded.

Hi,
Thanks for you answer.
The operations are simultanious, and should be carried out the same time according to initial planning. As for the individual capacity, we defined in the WC the value 3 in the "Individual capacity" field, and 100% utilization. Is there another setting required?
In this case, we expect the scheduling (by the automated dispacher) for the 4th operation to be forwarded to the next day due to lack of availabe capacity in the first day. Note that the first 3 operations should consume all the 3 individual capacity available in the first day. Our problem is that the dispatcher schedules all 4 operations to the first day although there isn't enough capacity.
Maybe the formula for the capacity / scheduling we used is not the right one (the formula uses "duration")? If we use individual capacity should we use different formulas?
Thanks,
Doron.

Split Individual Capacity for Work Centers

In Capacity Leveling for Individual Capacity (CM27 & CM28), what is the process in setting up individual "persons"?
What I would like to do is take an individual work center and divide it up into several different areas. I would like to treat the individual 'persons' as listed in Individual Capacity as those different areas I would divide my work center up into.
However, I have no current setup for personel available and when I go to assign a 'Person' to a specific quantity for my work center, there is "no persons found for the work center".
Where do I go to setup individual "persons" for my work center, and is this a realistic way to divide my work center up?
If not realistic, what method would you recommend to split up the work centers?
Edited by: Cameron on Sep 21, 2009 3:06 PM

Hi,
The best way to learn all these settings is studying the documentation in the IMG itself.
Still id you need the link or documents to read
"http://help.sap.com/saphelp_47x200/helpdata/en/b1/c03e4a439a11d189410000e829fbbd/frameset.htm"
Read the documentation step by step....
I hope this will help you.
Thanks
Raja

Capacity planning CM01 not displaying PM Order capacity

Hi experts,
I have created one order with the work center and defined operations...... but i am not able to see the CAPACITY REQUIREMENTS in the capacity planning (CM01)............
Please suggest me what should i do for this.............

Hi Maheswaran,
Thanks for the information , in configuration "Capacity Requirement Planning" have been maintained and now i am getting the CAPACITY REQUIREMENTS and CAP. LOAD also .........................but there is one problem i.e. when i am seeing the capacity planning (CM01) , IT IS NOT SHOWING THE VALUES ON THE DAY WHICH IS WORKING actually according to factory calendar FRIDAY and SATURDAY are holiday, but it is showing the value on SATURDAY and not showing the value on THURSDAY that is today........Please see the screen shot also......
what should i do.......

Individual Capacity production rate

The scenario is a work center with 2 machines, which are having different production rates. One machine has production rate of 1 hour / piece and another has 2 hours / piece.
In the work center these 2 machines are maintained as individual capacities. But how to maintain the different production ratesfor these individual capacities?

Dear ,
Based on your requirement , please note my suggestion to map this in SAP :
Option 1:
1.There are two individual capacity for your Work Centre having different production or drilling rate ( more specifically ) .They will assinged to CR02-Work Centre (Drilling ) -Capacity Tab Header Details-Available Capacity -No of Individaul Capacity .
2.Do not assing any Machine Activity Type in your Work Centre -Costing tab .(You may be having Set up activity type with Formula key as well as Labor also ) .
3.Create Two different Activity Type in KP26 under same Production Cost Center with propoer validity with different rate asisnged in the Activity Type .Take the Help of CO/FICO guy who will create the Activity Type with two different rate .
Activity Type : Automatic machine : 100 pc/100 min means 1 PC /MIN. Define the Miniute wise rate for this machine in KP26
Activity Type : Non-Automatic machine : 100 pc/50 min means 2 PC /MIN.Define the Miniute wise rate for this machine in KP26
4.Create Routing with two operation Line item : Drilling Automatic and Non Automatic and assing the Work Centre , activity type as applicable ( refer my earlier reply ) .Here keep Required Spillitng option with No of Split as 2 ( 33:67)
5.Create Production Order with 100 PCs which will processed as per the splitting and machine hrs
Option : 2
Otherwise , best option will be two different Work Centre with two different Machien Activity Type assinged with same Setup , Labor and work centre will be having single individual Available Capaicty in CR02.Follow point 2, 3 for the same
Regards
JH

Individual Capacity in production order

Hi all,
In which table can we see the individual capapcities maintained in production order.
Path >>> Production order > operation details > cap reqt assignment
Regards,
Yogesh

Dear ,
Bssically , it goes from KBEZ Add. data for table KBED -CRHD(Work Centre )-AUFK/AFVC(Operation details at Production Order ) .
Refer this thread : PP Tables
Individual Capcity comes from Work Center Addtional Capacity Tab and seats into Operation Overview of Production Order .
Hope it clarifies
Regards
JH

OPU5 settings and Capacity planning-CM01

Hi All,
I have a confusion while configuring the settings for scheduling for planned orders in REM environment PE order type, when i select the scheduling and capacity requirements in DS section system shows me capacity requirements in CM01,CM50 reports and also DS tab in planned order but when i deselect the same check boxes there si no data in CM01, CM02 or CM50,
If I need to generate the CM01, etc reports in REM environment , then do i need to select DS check boxes also?
My OPU5 settings are as attached in this case CM01 reports are fine.
Regards,
Anupam Sharma

Hi Anupam,
Screen shot is missing. Rate based scheduling is fine for REM.
Create a "Run schedule" planned order and schedule it via rate-based scheduling.
In transaction OPU5, choose order type PE and the plant you use.
Choose "Details" and in the field "Scheduling level", set "1 Via rate-based scheduling" and save the change.
For more information on this visit the following links
http://help.sap.com/saphelp_47x200/helpdata/en/8a/a58a864adc11d189740000e8322d00/frameset.htm
Levels of Scheduling - Planning Process - SAP Library
Regards,
R.Brahmankar

Capacity Evaluation: CM01 does not consider partially confirmed Prod Ord

Dear Gurus,
I was doing a test for CM01 and I found out that the Production Order with partial confirmation/delivery is still being considered as a full quantity in CM01 pegged requirements. For example is below:
Prod Ord Qty is: 1500
Partial Confirmation made: 500
Now in CM01 it still shows 1500, I thought it should only be 1000. Reason is this order is backlog from last week thus I only want the system to consider the 1000 open quantity and not the whole 1500. Is it achievable in CM01?
Thanks,
Raymond

Hi,
but this Production Order is still open with 1000 PC. I will still need to process the 1000 remaining quantity out of 1500 and in CM01 I would like it to show on 1000 PC instead of 1500 PC.
Another thing is for example, Im on the middle of the week, my available capacity is reduced and I also have already partially confirmed the production order. Then when I execute CM01, it will show capacity overload eventhough the open quantity is also decreased.
So my concern is instead of Production Order Base Quantity, can the system check the production Order Open Quantity?
Thanks,
Raymond

Capacity Planning CM01 Question?

We have a production order schedule for a workcenter over 3 Days.
The workcenter capacity is 15.74 HR
When i run CM01 without any Qty confirmed.
Day 1 has Requirements as 14.24 HR
Day 2 has 15.7HR
Day 3 has 15.7 HR
After i did a confirmation for Qty 1000.
Day 1 has 13.28 HR
Day 2 has 14.67 HR
Day 3 has 14.67 HR
My questions is why would capacities for Day 2 and Day 3 reduce. All the hours should have been consumed from Day 1 ?

Please check your order. It must have been scheduled over >= 3 days. Thereby adding capacity requirement over 3 days.
When you confirm the order, where confirmed order quantity is equivalent to 3 days of your capacity. Thus system reduces the capacity requirement from 1st Day and subsequently from next days also.
Thanks

Cumulative Individual Capacity in CM01

Similar Messages

Maybe you are looking for