Cumulative kf with load aggr

hello BW Experts,
What is a cumulative kf with 'load' aggregation behavior regarding the time dimension.
scenario:
fi-sl line-item extractor, 0balance is cumulative with 'load' aggregational behavior regarding the time dimension.
Suggestions appreciated.
Thanks,
BWer
Message was edited by: BWer
Message was edited by: BWer

Hi,
what i understood from the message again is ur mapping the filed currency to withdrawal keyfigure.
chk the columns order in datasource and flat file and assign the proper mapping pls.
lets say if u have Deposit,withdrwal, balance,currency as your fields in u r datasource then do have the same fields in your Flat file as well so that they are in same order as in datasource.
pls chk this and try again.

Similar Messages

Non-Cumulative KF data loading

Hi,
I have to copy the data from a non-cumulative cube to it's copy cube(Created using the copy cube option). I have created the DTP and directly loaded the data to copy cube.
When i compare the data between these two cubes, it is not same for the non cumulative key figures.
How can i load the data to overcome the data mismatch. Any special care to be taken to load the non-keyfigure values. (i can see one extra option in DTP i.e 'Initial Non cumulative for Non Cumulative values', i tried this, but it is loading only non cumulative values, other keyfigure data is not loading).
Regards,
Vishnu

Hi,
1) Determine in which way you wish to evaluate the non-cumulative value. If you only wish to evaluate the non-cumulative, or the non-cumulative changes as well as the non-cumulative using a particular time period, choose modeling as a non-cumulative value with non-cumulative changes. If you also want to evaluate the inflows and outflows separately, then choose modeling as a non-cumulative key figure with inflows and outflows.
2) The non-cumulative change, or inflows and outflows, which you require for the definition of the non-cumulative value, must already be created as InfoObjects if the non-cumulative value is created. Therefore, firstly define either the non-cumulative change, or the in- and outflows as normal cumulative values where necessary. These key figures must correspond to the non-cumulative values, which still have to be defined, in the type definition. The non-cumulative changes, or inflows and outflows, must have u2018summationu2019 as aggregation and as exception aggregation.
3) Define the non-cumulative value by assigning to it the previously defined non-cumulative change, or in and outflows.
For more info on Non-Cumulative KF go through the below link
http://help.sap.com/saphelp_bw30b/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/content.htm
Regards,
Marasa.

Error in creation of JCO with Load balancing server

Hi,
We are using a ABAP user base for our WEBAS server 6.40 (with ABAP+JAVA). i have created a Public group in concerned ECC 5.0 system. I have already configured SLD, and then i maintain data supplier bridge in SLD and run RZ70 in ECC 5.0 system to load system information.. i can see details in SLD ..
now i am trying to create JCO connections .. here i am unable to create JCO with load balancing option.. i get
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=<servername> GROUP=PUBLIC R3NAME=SID MSSERV=sapms<SID> PCS=1 ERROR service 'sapms<SID>' unknown TIME Fri Jun 16 12:41:20 2006 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -3 MODULE ninti.c LINE 505 DETAIL NiPGetServByName2: service 'sapms<SID>' not found SYSTEM CALL getservbyname_r COUNTER 1
i am able to create single server JCO, but it fails in load balancing.. is there anything i have missed out in settings...
Thanks and regards,
Sudhir

Thanks, Bogdan Rokosa
I have the same problem,and solved it following the steps provided by Bogdan Rokosa :
you must insert an entry for your R3 system
(like: sapms<SID> 3600/tcp)
in services file
(C:\WINDOWS\system32\drivers\etc\services) on Java WAS.
I test the Jco successful without restart J2EE Engine.

Trouble in a SAP system with load balancing

Hello masters:
I had a trouble with workitems that came from a SAP system with load balancing. They doesn't receive the workitem ID in the UWL.
I created another system in the portal as a "dedicated application server", and made the necessary configuration in order to replace the first one, and then my workitems worked fine.
However, I would like to know what appened with the first system created as "system with load balancing". Why this system didn´t pass the workitem ID to the application (web dynpro abap) that execute the workitems?
Thank you.

I hope there was some missing configuration in the first case which was not replicating the workitem from SAP Inbox to UWL.
Thanks
Arghadip

System with load balancing server

Hi All,
We are having SAP NW 7.0 Portal and back end we have R3 implemented in a cluster environment. The system object in EP have used "System with Load balancing" template; using the LOGON group and the other related parameters.
But we have some problem with the ITS and WAS parameters; since we are using some Transaction iViews.
Let me explain.. for the R3 cluster we have 2 systems PROD1.domain.ext and PROD2.domain.ext. Now in the system object in portal, how to specify the parameters for ITS and WAS parameters? Since the host name in these we need to specify a single server which defeats the basic purpose of having clustered environment.
Can any one please help in resolving this issue.
Thanks,
Sravanthi

Hi Sravanthi,
Please check the below for finding ITS and WAS parameters from backend :
For ITS - Go to SE37 >> Utilities >> Setting >> Click on ICON Right Top Corner in popup window >> Select Internet Transaction Server >> you will find the Standard Path and HTTP URL.
For WAS - Go to SE37 >> Run FM - RSBB_URL_PREFIX_GET >> Execute it >> you will find PRefix and PAth paramter for WAS.
Please refer to this may help step-by-step : How-to create a portal system for using it in Visual Composer
Hope it helps
Regards
Arun

Issues with load from Excel

Dear all,
I have issues with loading the data from excel.
My excel file looks like this:
Time
Store
Neto_prodaja_ACT
Neto_prodaja_TAR
Jan-12
C1
16
16
Feb-12
C1
2
2
Jan-12
C2
1
1
Feb-12
C2
3
3
My procedure for load is:
CLEAR STATUS
Across Var Down Time, Store
Sel Neto_prodaja_ACT, Neto_prodaja_TAR
Sel Store Input
access lslink
     connect test1
     select * from my_list
     peek only 10
     read
end
When I load the data I receive following error:
      Time                         Store Neto_prodaja_ACT Neto_prodaja_TAR
    1 01/01/2012                   C1 16.00             16.00
    2 02/01/2012                   C1 2.00              2.00
    3 01/01/2012                   C2                                                                                                                                                                                                                                                                       1.00              1.00
    4 02/01/2012                   C2 3.00              3.00
4 Record(s) Read, 0 Record(s) Skipped.
DAT096:
Unexpected Dimensions in ACROSS/DOWN List For Variable NETO_PRODAJA_ACT
DAT096:
Unexpected Dimensions in ACROSS/DOWN List For Variable NETO_PRODAJA_TAR
The loaded data looks like this:
The data for store C2 is loaded also on store C1 so everything is messed up.
I also have a question regarding dimensions. I have a model in PAS which has data from different data sources (BW and excel). In excel I have dimensions which are not loaded from BW (they don't exist there). How to create such dimenison?
Thank you a lot in advance.
Best regards,
Petra

Petra,
The Forum isn't really designed as a training system but rather where people can share questions or get a separate pair of eyes to look afresh at issues that aren't working for some reason. This is particularly the case for something which is as important as creating dimensions.
The idea of the SSM Cube Builder/Model Designer was to enable people to build models with their relevant dimensions and metrics for demos and simple initial systems using manual data entry. If you are getting into building dimensions that will be outside BW then you are moving into the implementation arena rather than demo creation and need to work carefully so that things tie up.
I doubt people would expect to be able to set up/implement BW without training and SSM is the same.
If you would like training or would like to collaborate on a first project to enable skills transfer then my colleague Pedro and I would be happy to discuss this. We have done this with other people and it has worked well.
Regards
Colin

Beginner Has Problem With Loading JDBC Driver Using MySQL

Hi, I am having problem with loading JDBC driver, and need your diagnotic help.
1. I have installed MySQL (C:\mysql), created a databse (soup), and created a littel table (VIDEOS). I am able to see the table in the console:
sql> select * from videos
2. I have downloaded the latest version of Connector/J (mysql-connector-java-3.1.0-alpha.zip), and unzip the zip file into my C:\ directory.
3. I copied the mysql-connector-java-3.1.0-alpha-bin.jar to the C:\j2sdk1.4.1_02\jre\lib\ext folder and it is in my CLASSPATH
4. MySQL server is running
C:\> C:\mysql\bin\mysqld-nt --standalone
5. open another DOS window and use the database
mysql>USE SOUP
6. succesfully compiled a Java program (javac Test.java):
import java.sql.* ;
public class Test
public static void main( String[] args )
try
Class.forName("org.gjt.mm.mysql.Driver").newInstance();
try
Connection con = DriverManager.getConnection( "jdbc:mysql://localhost:3306/soup" );
try
Statement statement = con.createStatement();
ResultSet rs = statement.executeQuery("SELECT TITLE FROM VIDEOS");
while ( rs.next() )
System.out.println( rs.getString( "TITLE" ) );
rs.close();
statement.close();
catch ( SQLException e )
System.out.println( "JDBC error: " + e );
finally
con.close();
catch( SQLException e )
System.out.println( "could not get JDBC connection: " + e );
catch( Exception e )
System.out.println( "could not load JDBC driver: " + e );
7. when I run the Java program (java Test), I got
the message:
could not load JDBC driver: java.lang.ClassNotFoundException: org.gjt.mm.mysql.Driver
What am I missing?

Hi,
I missed to specify test in my last post.
Try running your program by explicitly setting the classspath when
running your program . java -classpath c:\mysql-connector-java-3.1.0-alpha-bin.jar test
Make sure your jar file contains org.gjt.mm.mysql.Driver class

Other problems with loading Captivate files into Flash AS3 project

I have a Captivate file done with Captivate 3, published to
Flash player 9 that is being loaded into Flash AS3. The captivate
is a simple recording of some mouse clicks in a browser. I am
displaying the playbar along the bottom, and its buttons all work
fine except for the progress bar, where you can drag the knob and
scrub back & forth in your presentation.
This progress bar is not working as it should. I see the
mouse cursor change to a hand, but when I click I cannot drag the
knob to control the progress bar. The other buttons in the playbar
do work (replay, pause, play, back, forward).
This is a unique problem in that it is only happening when
viewed in IE (7) when loaded into my Flash AS3 project. When viewed
in Firefox in my project, or as a standalone SWF, or as a SWF
simply embedded onto a plain HTML page, it works just fine.
Does anybody have any insight?
Another thing I notice with loading Captivate files with AS3
is the the amount of output messages it displays. Rather annoying
(unless this is a "feature" I've yet to be aware of - heh)

Hi,
I know exactly how you feel, there is simple answer; replace
Captivate for Camtasia Studio 5 at techsmith.com. The weight on
those shoulders will be gone! You'll smile more, be more
socialable. One Happy Person.
I am very happy person ;)
Kind Regards,
Boxing Boom

Problem with loading data to Essbase

Hi All,
I have a problem with loading data into Essbase. I've prepared maxl script to load the data, calling rule file. The source table is located in RDBMS Oracle. The script works correctly, ie. generally loads data into Essbase.
But the problem lies in the fact, that after deletion of data from Essbase, when I'm trying to load it again from the source table I get the message: WARNING - 1003035 - No data values modified by load of this data file - although there is no data in Essbase... I've also tried to change the mode of loading data from 'overwrite' to 'add to existing values' (in rule file) but it does'nt help ... Any ideas what can I do?

Below few lines from EPM_ORACLE_INSTANCE/diagnostics/logs/essbase/dataload_ODL.err:
[2013-09-24T12:01:40.480-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received Validate Login Session request
[2013-09-24T12:01:40.482-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received client request: Get App and Database Status (from user [admin@Native Directory])
[2013-09-24T12:01:54.488-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: MaxL: Execute (from user [admin@Native Directory])
[2013-09-24T12:01:54.492-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Received client request: MaxL: Describe (from user [admin@Native Directory])
[2013-09-24T12:01:54.492-10:01] [ESSBASE0] [MLEXEC-2] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Output columns described
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Define (from user [admin@Native Directory])
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Fetch (from user [admin@Native Directory])
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [MLEXEC-3] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Record(s) fetched
[2013-09-24T12:01:54.496-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received client request: MaxL: Fetch (from user [admin@Native Directory])
[2013-09-24T12:01:54.498-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received Validate Login Session request
[2013-09-24T12:01:54.499-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: Get Application State (from user [admin@Native Directory])

Problem With Loading the jars

Hello Experts,
I am facing a problem with loading classes.
i have written one application which is running on server.in that application want to use certain jars(Classes)and those jars anmes and
classes inside the jars are same.based on the condition i want to call
corresponding class.
can any one suggest the solution
it's urgent
any help will be appriciated
thanks in advance
With regds
Bankuru

Hi Yogee,
Thanks for ur help.
i have 4.o jars and 5.1 version jars.depending on the condingtion system must use the corrensponding jar.the problem here is that both jars has same clasees and code inside that one is differnet.
when i run application with 4.o condition then 5.1 is not working and
if i run tha application with 5.1 then 4.o is not working.
can u please suggest the possible solution
i have deployed these jars in application server
With Regds
Bankuru

Problem with loading file with SQL loader

i am getting a problem with loading a file with SQL loader. The loading is getting
terminated after around 2000 rows whereas there are around 2700000 rows in the file.
The file is like
919879086475,11/17/2004,11/20/2004
919879698625,11/17/2004,11/17/2004
919879698628,11/17/2004,11/17/2004
the control file, i am using is like:-
load data
infile 'c:\ran\temp\pps_fc.txt'
into table bm_05oct06
fields terminated by ","
(mobile_no, fcal, frdate )
I hope, my question is clear. Please help, in solving the doubt.
regards.

So which thread is telling the truth?
Doubt with SQL loader file wih spaces
Are the fields delimited with spaces or with commas?
Perhaps they are a mixture of delimiters and that is where the error is coming in?

Hi.have a g5 mac,dual core 2.3 unit.i bought it with no hard drive.have got hard drive,formatted for mac.i am trying to load osx.i get a grey screen with a small box in the centre with 2 character faces,and then grey apple with loading icon spinning.help?

hi.have a g5 mac,dual core 2.3 unit.i bought it with no hard drive.have got hard drive,formatted for mac.i am trying to load osx.i get a grey screen with a small box in the centre with 2 character faces,and then grey apple with loading icon spinning.nothing is loading tho.

I see 10.6.3 in your profile---is tthat what you are trying to load? If so, it won't work. No PowerPC Mac like your G5 can run a Mac OS version higher than 10.5.8

HTTPS with load balancing

Hi guys,
We have a portal system with instance 08, so we typically connect to the portal using port 50800 for HTTP, and 50801 for HTTPS.
We have just created a second server node for this portal (in the config tool).
When we connect to 50800, does this automatically load balance the user to the better server? From some reading on these forums, it seemed to indicate that load balancing will only occur if I connect using port 8109. (where 09 is the instance number for the SCS of our portal)
When connecting to port 8109, we are redirected to port 50800, as I'd expect.
Question 1 - do we need to use 8109 for load balancing, or can we still use 50800?
Question 2 - If we need to use 8109, which is a HTTP port, how can we achieve load balancing with HTTPS. Is there a different port we need to use to have HTTPS with load balancing?
Question 3 - Is the creation of a second server node the best way to accomodate additional users and load on the portal system, or is there a better way to do things?
Thanks,
Michael.

Better late than never.
The load balancing you describe through the message server has its limitation. It redirects you to one of the dialog server hosts which means that any bookmarks will always point directly to a dialog server which may be down at that moment.
Access directly to a dialog server on port 50800 will sort of load balanc on the java server instances that are on that server but not on other servers.
The general recommendation is to setup an external loadbalancer and SAP Web dispatcher is a good match if the load is not very high. SAP webdispatcher will then bind up the cluster address and act as a proxy towards the dialog servers of the portal. The user will therefore only see one address. This will also work for HTTPS.
Regards
Dagfinn

Moving SMTP server to Azure with Load balancer

How to
move SMTP server to Azure with Load balancer???

Hi TechM,
Base on my experience, Windows Azure Platform does not provide out-of-the-box mail server (neither SMTP nor POP3). You could use SendGrid to sent mail. About this issue, I recommend you could refer to
http://stackoverflow.com/questions/10631585/email-sending-approaches and
http://blogs.msdn.com/b/patrick_butler_monterde/archive/2010/10/11/sending-e-mail-from-windows-azure-part-1-of-2.aspx
Hope it helps.
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I have a problem with loading the PNG image

I have a problem with loading the PNG image from site. For ex. go to icefilms com and is starts to load png like crazy CPU is huge and you can not shut down Firefox at least a minute. This is not just in this site but whit any one whit lots of pictures.
Image from firefox: Picture [http://img836.imageshack.us/img836/9910/7312011103147pm.jpg 1] [http://img28.imageshack.us/img28/8505/7312011103249pm.jpg 2] [http://img706.imageshack.us/img706/5615/7312011103348pm.jpg 3 ][http://img827.imageshack.us/img827/8483/7312011103533pm.jpg 4]
This is my Task Manager [http://img217.imageshack.us/img217/5715/7312011103621pm.jpg 1]
- I try safe mode, same thing
-All addons and plugins are ok
Any idea why is this so big problem.

i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally.

Cumulative kf with load aggr

Similar Messages

Maybe you are looking for