CUMULATIVE& NON CUMULATIVE KF'S

hello all,
1. what is the difference between Cumulative& Non Cumulative Key figures?
what is the use & where &when we used these kf's ?
2.what is Virtual kf's ? wt is the use &where , when we used ?
pls any body explain ,,,thnks

Hi Trupti,
Cumulative value is the default type for a keyfigure.
The following is a typical scenario for a non cumulative keyfigure with inflow and outflow.
Have two keyfigures (of type cumulative value) ZWITHDRAWALS and ZDEPOSITS set to exception aggregation Last value with 0CALDAY as the aggregation reference characteristic.
Create another keyfigure ZBALANCE (of type non cumulative value) with ZDEPOSITS as inflow and ZWITHDRAWALS as outflow having Last value as the Exception aggregation.When you do this, the following operation is performed in the period.
Balance on Date2 = Balance on Date1 + Deposits - Withdrawals
(Where date1 is earlier than date2). All the keyfigures are of type Amount
Have a Characteristic ZCUSTID for whom the balance is shown as on a particular date
Do refer this link for additional information:
http://help.sap.com/saphelp_nw04/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/frameset.htm
Regards,
Balaji

Similar Messages

Concepts: cumulative / non-cumulative key figures. Differences.

Hi, could you help me to understand cumulative / non-cumulative key figures concepts ? When use it? Differences? Performance?
I appreciate you if you spend few rows without link to massive web documentation.
Thanks in advance!
Bye!
Ferdinando

Have a look at this:
Non Cumulative and Cumulative Key Figure
Hope it helps.
Regards

CUMULATIVE &NON-CUMULATIVE

Hi,
Guru's i'm new to BI, CAN ANY BODY PLS TELL ME WHT? ARE CUMULATIVE&NON-CUMULATIVE (CHAR &KF's).
I went throughthe SDN material but cannot understand ,can any body pls tell me as to how they are created &where are they used and their properties if any?
Pls,
Point's granted in advance.
Thanks&Regards
Kittu

Hi,
here are the links
Key figures
Concept of Non-cumulative KYF
(urgent)Data is not displayed in cube
Non cummulative key figure
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
It explains verious scenarious related to non-cumultives.
Thanks

Cumulative and Non-cumulative KFs

Guys,
so I am confused about cumulative/Non-cumulative keyfigures. I read what it says about them on help.sap.com
Flow/non-cumulative value
You can select the key figure as a cumulative value. Values for this key figure have to be posted in each time unit, for which values for this key figure are to be reported.
Non-cumulative with non-cumulative change
The key figure is a non-cumulative. You have to enter a key figure that represents the non-cumulative change of the non-cumulative value. There do not have to be values for this key figure in every time unit. For the non-cumulative key figure, values are only stored for selected times (markers). The values for the remaining times are calculated from the value in a marker and the intermediary non-cumulative changes.
Non-Cumulative with inflow and outflow
The key figure is a non-cumulative. You have to specify two key figures that represent the inflow and outflow of a non-cumulative value.
For non-cumulatives with non-cumulative change, or inflow and outflow, the two key figures themselves are not allowed to be non-cumulative values, but must represent cumulative values. They must be the same type (for example, amount, and quantity) as the non-cumulative value."
and also checked a few threads on sdn but still a little confused about their purpose.
Can someone tell me when do we use which one?
Thanks,
RG.

Hi Ram,
Cummulative & Non Cummulative Key Figures :
Basically the key figures are of two types cumulative and non cumulative.
Cumulative are the normal one which you use always and they always bring the new values of the key figures in the delta that is if suppose A has value 10 and after change the new value is 20 then you will use cumulative key figures there, and your delta( new value) will bring 20.
but suppose your key figures field only the change in the prior value that is in this case the delta in the key figure value will bring 10 (20-10- change of 10 )as new value in the key figure A then you will have to model it through the non cumulaitve key figures.
Now
1) Cumulative is for the first case that is if the key figure alwyas brings the new values of the key figure and not the change sin the key fiures value.
2)NCum. value with NCUM value change:
In this case ther is only one field which brings the changes for a particualr key figure and you ahve to define that key figure as non cumulative.
Ex: In case of stock only one filed brings both ingoing value and outgoing value so 10 ,-4,100,-34.....
In this case you will this option and use the key figure here in the space provided.
3) In this case you haev two separate key figures one for the inflow of stocks and one for the outflow of the stocks.
you use one key figure for the inflow and one key figure for the outflow.
The main key figure autiomatically takes care of the logic and gives the correct output upon the summation
net value of stocks( inflow- outflow).
Also do remember in this case the key figure for inflow and out flow are the basic key figures that is cumulative key figures.
A non-cumulative is a non-aggregating key figure on the level of one or more objects that is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory. here the aggregation of key figure is based on the another info object
There are two different ways to define non-cumulative key figures:
u2022 Non-cumulative key figure with non-cumulative changes:
Before you can define the non-cumulative key figure, an additional cumulative key figure containing the non-cumulative change must exist as an InfoObject.
u2022 Non-cumulative key figure with inflows and outflows
There has to be two additional cumulative key figures as InfoObjects for non-cumulative key figures - one for inflows and one for outflows. The cumulative key figures have to have the same technical properties as the non-cumulative key figure, and the aggregation and exception aggregation have to be SUM.
Features of non-cummulative key figures
A non-aggregating key Figure.
Records are not summarized for Reporting
Exception Aggregation is being applied on these key figures on the level of one or more info objects usually with time .
Examples: Head Count, Account balance, Material stock
consider simple senario
Date Net Stock Quantity Sales Revenue
01.02.2005 40 1000
02.02.2005 50 2000
03.02.2005 25 3000
this is the query output if stock quantity has treated as cummulative and non-cummulative key figures
if stock quantity taken as a cummulative key figure
Date NET STOCK QUANTITY SALES REVENUE
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 100 6000
in the above result the key figure has aggregated to the total value that wont give sense to the net stock quantity
if stock quantity taken as non-cummulative key figure
Date Net Stock Quantity (LAST) Sales Revenue
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 20 6000
Hope it helps you.
Thanks & Regards,
SD

Non Cumulative Key Figures Simple

Please Help me with this.
I have the measurement Amount "0meas_value" non cumulative key figure and
aggregation properties Sum and Last value and other key figure is 0meas_chg
cUMULATIVE KEY FIGURE. aggregation properties Sum and summation. Now my question if I map the field from R3 Datasource (MEASVALUE) to CUMULATIVE key figure 0meas_chg, will it me a mess??? , Since when i try to put "0meas_value" non cumulative key figure in infosource it gives the error that you cannot put the non cumulative keyfigure in infosource. Please tell how can i then map to non cumulative key figure.?? and if I do not map what will be the problem??
Technical name: 0MEAS_VALUE (Non Cumulative)
Use
This key figure contains the measurement amount of a real estate object on a given key date. The key figure is used for analyzing changes to the real estate portfolio.
and
Technical name: 0MEAS_CHG (Cumulative)
Use
This key figure contains the change to a measurement on a given key date. The key figure is used for analyzing changes to the real estate portfolio.
Technical Data
Aggregation
SUM
Exception Aggregation
SUMMATION
Cumulative/Non-Cumulative Value
Cumulative value
Thanks
Soniya

This kind of issue is difficult to analyze.
Basic approach would be:
1. make sure your BIA revision is the latest.
2. check Tcd: RSDDBIAMON2 and make sure there is no red light
3. rebuild the BIA Index and try again.
Regards,
Patricia

Cumulative and non cumulative

Hi All,
What is the exact deff between cumulative and non cumulative?
give me a simple sceneriao it would be very helpful...?
thanks
kiran

HI ,
Cumulative : Normal Key figures are cumulative
Example : Say Key figure X has on 15th you have Qty 20 & oon 16th you have Qty 10
So when you run the report you can see the value for X Kf as Qty 30.
So,here the values are cumulated
Non -Cumulative : Derivative of the two cumulative key figures showing in the New key figure is Non -Cumulative
Example: Non - Cumulative KF is Qty total stock
Qty total stock is the derivative of Qty Reciept Stock & Qty Issued Stock
Date        Qty   Receipt stock                        Qty Issue Stock                            Qty Total Stock
15th   |            20                    |                                   10          |               =                    10
16th         |     10 + 15 =25             |                            02              |          =                     23
Hope you can understand
Regards
Hari

Non-cumulative Values not showing in Inventory Management Queries

Hi:
Has anyone had a problem with the new version and Non-cumulative key figures not showing up in Bex for Inventory Managemet reports? Specifically, they showed and validated back to ECC for our Development and QA boxes but now in our Regression box they are all showing zeros. Our Cumulative values are all showing correctly still within the Regression box. For example, Total Receipts and Total Issues are correctly poplating values but Total Stock is not.
I have checked and validate that the configuration in the Regression box matches or Dev and QA box.

Found the problem. It had to do with the compression variant in the delta process chain. The compression was set to 'no marker update'. Since we only started receiving measureable deltas in or regression box this is where the incorrect setting showed up. Reinitalized and the deltas are working correctly now.

Aggregates on Non-cumulative InfoCubes, stock key figures, stock, stocks,

Hi..Guru's
Please let me know if anybody has created aggregates on Non-Cumulative Cubes or key figure (i.e. 0IC_C03 Inventory Management.)
I am facing the problem of performance related at the time of execution of query in 0IC_C03.( runtime dump )
I have tried lot on to create aggregate by using proposal from query and other options. But its not working or using that aggr by query.
Can somebody tell me about any sample aggr. which they are using on 0ic_c03.
Or any tool to get better performance to execute query of the said cube.
One more clarification req that what is Move the Marker pointer for stock calculation. I have compressed only two inital data loading req. should I compress the all req in cube (Regularly)
If so there would be any option to get req compress automatically after successfully load in data target.
We are using all three data sources 2lis_03_bx,bf & um for the same.
Regards,
Navin

Hi,
Definately the compression has lot of effect on the quey execution time for Inventory cubes than other cumulated cubes.
So Do compression reqularly, once you feel that the deletion of request is not needed any more.
And ,If the query do not has calday characterstic and need only month characterstic ,use Snap shot Info cube(which is mentioned and procedure is given in How to paper) and divert the month wise(and higher granularity on time characterstic ,like quarter & year) queries to this cube.
And, the percentage of improvement in qury execution time in case of aggregates is less for non cumulated cubes when compared to other normal(cumulated) cubes. But still there is improvement in using aggregates.
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

Transformation between DS and DSO missing Non-cumulative KYF

Hi SDN,
I installed the business content for CML, and am working with 0CML_DELTA_CAP datasource. I would like to create a transformation between this datasource and DSO 0CML_O03.
By default, when you install the CML business content, the datasources use the 3.x dataflow concept (transfer rules, infosources, and update rules).
I would like to use the 7.x dataflow concept and created a transformation between the 0CML_DELTA_CAP datasource and the 0CML_O03 DSO. In the transformation, it is missing the fields 0CML_B330, 0CML_B340, 0CML_B360, 0CML_B380 in the datatarget. These key figures are non-cumulative with NCum Value change (0CML_B330 uses 0CML_B331 as value change). The value change key figures show up in the transformation, but the non-culmulative key figures do not.
Does anyone have any ideas why the non-cuml. kyf are not showing up in the transformation?
Thanks,

Hi Brendon,
The non- cumulative key figures are not mapped in the transformation. Only the 'Inflow' and 'Outflow' key figures for the non- cumulative key figure are mapped.
You can check the property for the non- *** KF in RSD1, where you would find the corresponding inflow and outflow kf. If both of these are mapped in the transformation, the non- *** kf would calculate the value in the report in which it is included as:
Non-*** KF value = Inflow value - Outflow value.
Hope this helps.
Regards,
Abhishek.

More than Non-cumulative cubes in one MultiProvider

Hi There,
I have got two non cumulative cubes and want to build a MultiProvider on them.
Got information at couple of places on help.sap.com at one place it says MultiProvider can have more than one non-cumulative cubes at other place it says it can't. What is the right suggestion?
Thanks
Vikash

Hi,
From the performance perspective you should not use more than one Non Cumulative Infocube in a Multi Provider. If you user more than one the query will not execute parallel and execute in sequential which leads to delay in query run time.
This is a recommendation from SAP not to use morethan one Non Cumulative Cubes in a MP.
Cheers

Purpose of Non Cumulative key figures

Whatu2019s the purpose of Non Cumulative key figures?

Hi....
There is an explanation of advantages and disadvantages of using non-cumulative key figures in "How to handle inventory management scenarios in BW" white paper:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20handle%20inventory%20management%20scenarios.pdf
Also Check..........
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8dfe6-fe1c-2a10-e8bd-c7acc921f366
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/frameset.htm
Re: Non-Cumulative keyfigure example
Hope this helps.....
Regards,
Debjani........
Edited by: Debjani Mukherjee on Oct 27, 2008 3:46 AM

Error in query due to exc aggregation with non-cumulative KF

Hi All,
when i am trying to execute a query I am getting the following errors.
SAPLRRI2 and form RTIME_FUELLEN_06-01-
Program error in class SAPMSSY1 method: UNCAUGHT _ESCEPTION.
I have calculated KF of non-cumulative KF. If I delete the calculated the query is ok.
I am working on BI 7.Did anybody got this error? any idea?
I have implemented notes 976550 and 991563
Thank you

Hi,
Any one with any suggestions?
Mohammed

Problem with Non-cumulative key figure.

Hi all,
I am facing the problem with the Non-cumulative Key Figure (Quantity). I have created and loaded data to the non-cumulative InfoCube. This cube is defined by me to test the non-cumulative key figure.
In BEx query the non-cumulative key figure and cumulative key figure (Value change) both display same values, i.e. non-cumulative key figure contains the same values which we have loaded for cumulative value change. Non-cumulative key figure is not calculated based on associated cumulative key figure.
I have done the following while defining the non-cumulative InfoCube:
1. Created a non-cumulative key figure which is associated with a cumulative key figure (value change).
2. Loaded data to non-cumulative InfoCube from flat file.
3. Compressed data in non-cumulative InfoCube after the load.
Note:
1. Validity area is determined by the system based on the minimum and maximum date in data.
2. Validity determining characteristic, 0CALDAY is the default characteristic selected by the system.
Is there any other settings to be done?
Please help me in resolving this issue.
Thanks and regards
Pruthvi R

Being a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra

Non cumulative infocube without BX

Hi Experts,
I need to compress and create aggregates for the inventory cube (Has Non cumulative in/out flow KFs)
We do not use BX as all of the initial stock levels are defined using movements. Does this change anything?
Which way is it as I have seen both answers posted in this forum?
BF-init: Compression without marker update
BF-delta: Compression WITH marker update
OR
BF-init: Compression without marker update
BF-delta: Compression WITHOUT marker update
Thanks,
Chris

If you are not bringing BX, all BF should be compressed with marker update.

Non-Cumulative Key figure with inflow & outflow

I am using some non-cumulative key figure in our inventory cube, however, I could not find the non-cumulative field in E or F table of the cube?
Is there a separate table to hold the reference unit. If so, what is the table name.
Thanks.

Hi,
Go to t-code RSDV and enter the tech.name of your cube that has the non-***. key figure and you will see a validity table. This is only thing I know that will make you look at validity table.
The unit for the Non-*** KF will be the same unit as its inflow and outlow parameters' unit.
Thats my 2 cents on the matter.
Reddy

CUMULATIVE& NON CUMULATIVE KF'S

Similar Messages

Maybe you are looking for