CUNI - Creation of new unit - error Unit is not created in language EN

Dear BI community,
We have created via transaction CUNI a new unit. Everything looks fine - it appears in the unit of measurement and the conversion works.
The problem only occurs when we check it in table T006A by example. When looking for it we get the following error message
"Unit is not created in language EN".
We have tried the "translation" option of CUNI but when we select another from language than EN we get not value.
Any idea?
Thanks,
Rodolphe

Hi All
We have the same issue.
Please let us know how could you fix this issue.
Thanks

Similar Messages

  • Error as unit of measure PC not defined for language RO while creation ofPO

    Hi GUYS,
    When am trying to create a PO in ME21N transaction i got error as below,
    unit of measure PC not defined for language RU
    Message no. 06079
    Table 006A contains no entry for this unit of measure
    Please let me know what action to be taken from my side to over come this issue.
    Note: If i check the related vendor i could able to view that the language maintained as RU.
    Cheers,
    Kumar.S

    Hi Jurgen,
    Thanks for your reply once again.
    As mentioned by you earlier i have tried to login with languae RU in Q system but unfortunately i got an error saying taht language not installed.
    Also we found for Language - EN and UOM - PC has been maintianed in T006A table.But if i check for lanugage - RU and UOM PC combinatoin has not manintaned in T006A table.
    Please let me know how to maintain the values in this table T006A for combination Lang - RU and UOM - PC.
    Please revert back with your soilution.
    Note: I have tried in SM30 but failed due to below error
    The maintenance dialog for T006A is incomplete or not defined
    Cheers,
    Kumar.S

  • Error '' Unit IN2 is not created in language EN"

    Hi all, I have created new material using UoM as "2 (square Inch), when i am doing excise Invoice for the same material it is ginving me error that '' Unit IN2 is not created in language EN"  while it is allowing me to do GRN without Exc Invoice.
    i have tried to CUNI , there is no entry showing for  unit of measurement for "2 or IN2 . i tried to maintained is is giving message
    'Unit of measure IN2 already exists'  if i checked table t006A it is showing the Enrty in EN & DE both language,
    i have also teried
    Goto --> translation --> unit of Measurement  but not sure what to do there, i have save confirm translation for the "2 there but still same problem is appearing.
    Please Guide  Any helpful ans will be awarded full marks. thanks

    In what language did you create this new unit?
    when you start CUNI, in the initial screen choose from menu GOTO > Translation  to translate your unit into english language.

  • Unit KG is not Created in language EN-- Error in MMBE

    Dear Guru,
    When i am running MMBE to verify the stock, system showing the stock as per parameters givien for Unit of Messasurement ( ex. EA.)
    After Executing the report, at header level when i am chaing Unit of Messasurement  ( Ex. to KG) system giving Error message
    <b>Unit KG is not Created in language EN</b>
    But when i am running mmbe by giving Unit of Messasurement KG and excuting ..its shows the report.
    Y i am getting error message after excuting report and changing the UoM.
    Plz guide me.
    Regards,
    Venkat

    Hi,
    As with most SAP messages it is always a good idea to trust what it is saying.
    The system is telling you that KG has not been created in the English language.
    Go to transaction CUNI to check the settings.
    Select the Unit of measure for "MASS" (from the drop down list) and check the entries for UOMs.
    KG should be there and should have an English description (the message said it was not there for EN)
    If it is there and set up correctly then there might have been something else in the UOM field? You didn't enter " KG" did you (a blank character then  KG?)
    Steve B

  • Error 'Unit ST is not created in language EN...' at conversion exit

    Hi
    When i try to load a flat file i have this error message :
    Error 'Unit ST is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field SALES_UNIT record 1, value ST)
    My source has unit field. in the field in have sometime PC or ST  --> ST is coming from BW
    But when i load the file it gives the error for ST value.
    In my datasource i have the correct CUNIT conversion routine apply on the unit field
    Thanks for your help
    Cyril

    Yes this value is not maintained in T006 table. that's why i have the problem.
    So how to solve it.
    I have an ETL tools which read my DSO tables and it extract ST so i need to convert it this value exist in BI (internal code of PC)
    Cyril

  • Error message :PurchOrder : Unit of measure PC not defined for language ES,

    Hello,
    I am facing a problem with PO replication to R/3 backend.
    POs are not replicated to R/3, POs are in status 'Transfer Failed (E.Sys.)'  .
    When I check with 'RZ20' transaction I got this message :
    PurchOrder : Unit of measure PC not defined for language ES.
    SRM 4.0 Extended classic scenario
    Regards,
    Shaiek

    Hi
    This seems to be a configuration issue,.
    Pls maintain the unit of measure in configuration using transaction CUNI
    Hope this will help.
    Pls reward suitable points.
    Regards
    - Atul

  • Error 'Unit 1 is not created in language EN...' at conversion exit CONVERSI

    Hi Experts,
    I'm loading Flat File data of 1.5 Lacks record in to Cube. I'm encountering this error in InfoPack monitor.
    Can anyone help to resolve this please.
    Error 'Unit 1 is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field UNIT record 6628, value 1)
    Thanks

    It got resolved by checking the internal in the field selection tab of Datasource.

  • Unit of Measure TON not defined for language PT ?

    Hi all,
    I'm new to MM and to SAP in general and I have 2 questions for now :
    1. I have a requisition which is set up using unit of measure TON. When I try to create the PO, an error message pops up saying " Unit of measure TON not defined for language PT ". Do you know what does language PT means and why does this error appears? When I try to convert the TON into TNE, the same message pops up : " Unit of measure TNE not defined for language PT ".
    I also can not convert TON into EA...any ideas why?
    2. How can I see the total value of a PO that has many lines ?
    Thank you very much
    Iuliana

    Hi
    Is this error  "" Unidade de medida *** não definida em idioma PT ""
    appearing only when you select Ton, or any other unit.
    pl. clarify.
    I have seen that you get this message when your loging Login language is Portuguese.
    Any how Configuration of units needs to be checked in
    Spro >General setting > check Units of measurements ,
    ( or pl. use Tcode --  Cuni )
    I also can not convert TON into EA...any ideas why?
    can you give me some more inputs, what erro are u getting ?
    2. you can see the total Po. values in Po header details
    under status tab view.
    if my soln is found usefull
    Pl. award me points
    Thanks
    Prasanna kumar .b.a

  • Unit ST is not created in language EN

    Dear all,
    we are using SRM 5.0 in the extended classical szenario.
    Here we are facing a problem in transaction BBP_POC (Process PO):
    When we try to add a new line to a PO we get the following error message "Unit ST is not created in language EN".
    Although the first line was created with ST in EN.
    Afterwards it is not possible at all to change the PO. We get the error message in every screen.
    Thanks and regards
    Achim

    Hi
    <b><u>See this pointer / links below -></u></b>
    <b>Note 781669: Correction of BBP_CND_CUSTOMIZING_CHECK</b>
    Please maintain your ISO Code for ST in Tcode CUNI, the ISO code for ST supposed PCE and tick the primary code. After you maintain the ISO Code, try to retransfer the PR again from SMQ1, and if there's still error, check to SRM--Tcode SLG1, and see what's the error.
    <b><u>Related link -></u></b>
    <u>Re: Incorrect status in pricing - SRM server 5.5</u>
    Re: PR transfer error to SRM " Measurement unit ST has no ISO code"
    Do let me know. Hope this will help.
    Regards
    - Atul

  • Unit of measure PCS not defined for language FR

    Dear Gurus,
    I try to raise a PO in ME21N, when saving the order, I am being prompted by the system with the following message:
    "Unit of measure PCS not defined for language FR"
    I then went to MM02 to check the material master data "Sales Text" Tab.
    There the only language available is English, so I clicked on the "Language Maintained" Tab and created a new language for French.
    The problem is that when I want to save the changes, the system prompts me with the following message:
    "Blank texts exist in the following languages: French and English, these texts will be deleted"
    Then the Material Master Data closes and no changes have been made.
    Can you please guide me through step by step of what I have to do to be able to populate the field "PCS" for pieces in French so that it is taken into account in the Material Master Data and by extension in a PO.
    Thanks for your help.
    KInd regards
    Chris

    Hi Chris,
    Goto T code CUNI. In the first screen click on GOTO-Translation-dimension.
    Enter EN in Source language and FR in Target.Maintain the entry there.

  • Unit of measure EA not defined for language PT

    Hello,
    Vendor Communication is maintained in "Portuguese language-PT", while creation of Scheduling agreement system will given the below error, bcz Scheduling agreement will taken the Langause from vendr master
    "Unit of measure EA not defined for language PT"
    Table 006A contains no entry for this unit of measure.
    We have cross checked Material master and maintained the "langauge-PT" in material master additional data.
    Checked  T006A table for "EA" found for language "EN, DE, CN etc. not for "PT"  how to maintain T006A table for Portuguase langauge.
    Regards
    Mahesh Naik

    >
    Mahesh Naik wrote:
    > Hello,
    >
    > Suppose we have changed the source langauge "EN" to Target Langauge"PT" is it change all the Unit from EN to PT. after that how the system will pick english language's
    No, it just gives you all the units maintained in that source language as a proposal to enter the description in target language PT, there will not be any change to the source language EN while maintaining a translation.

  • Unit *** is not created in language EN - POSDM in CAR 1.0

    Hi all,
    I am getting the error message "Unit *** is not created in language EN" (Message no. BM305), while creating POSDM transaction.
    I did set up and loaded data into BI components 0MATERIAL, 0PLANT, 0RPA_MEAN, 0MAT_PLANT & 0RPA_MARM.
    I have verified that tables T006 & T006A are having Unit of measure 'EA' with language English.
    When I used Tcode 'CUNI' and gave source and target language as EN. I am getting error message 'Could Not Save Target Text'. But this would not be an issue I guess, because I have verified a working system source/Target were not maintained there.
    Please let me know if any further setting to resolve the issue.
    Thanks,
    Venkatesan

    Thanks Vikrant for your reply.
    Actually I have used flat file upload, and ensured that the Infoobjects are mapped properly.
    When I use POSDM Workbench, I am getting error like 'Unit EA is not created in language EN'. T006/T006A are having UoM in language EN. Is any other common setting I am missing here?
    0RPA_MARM - has only attributes? Do I need to upload TEXT for this object?
    Thanks,
    Venkatesa

  • Unit not created in language EN

    Hello,
    When loading a flat file, I receive the following error:
    Error in conversion exit
    CONVERSION_EXIT_CUNIT_INPUT
    So then I checked the units of measure in my flat file against the T006A table via SE16 in BW.  When I looked up some of the units of measure, I get the following error:
    Unit is not created in language EN.
    Question:  How do I create the unit of measure in language EN?
    Thanks,
    George

    Neither of the suggested solutions worked. 
    I ran RSDMD_CHECKPRG_ALL from se38 for 0BASE_UOM and 0UNIT.
    I also removed CUNIT from the column CONVE which is next to the UNIT column.
    I am still receiving the same errors as before.
    Any other suggestions?

  • Unit *** is not created in language

    Dear all,
    in SAP CRM WebUI when I'm trying to create ERP Sales order from ERP Quotation in a follow up process I get the error "Unit *** is not created in language EN".
    CUNI settings are OK in both ERP and CRM systems.
    In a web page dialog when I want to confirm/choose the items to get copied into ERP Sales order I get the item shown in as 1 *** (instead of 1 PC - piece). When I confirm, in the next step system raise the error message.
    Same scenario happens on all languages.
    Any idea how to solve this is most welcome.
    Best regards.
    Hrvoje

    CUNI setup (units of measures) in both systems is equal and seems OK.
    Creating ERP sales order from reference to ERP quotation in ERP itself is working with no problems.
    Best regards,
    Hrvoje

  • Unit STD is not created in language EN

    Hi everyone,
    During uploading of AP transactions,we got this error:
    Unit STD is not created in language EN. I've checked tcode SE38 and tried to search for STD in language EN but it gives me the same warning/information. I also run RSDMD_CHECKPRG_ALL and it says that characteristic STD is not active and I need to activate that characteristic. How am I going to do that? Can somebody teach me how?
    Thank you,
    April

    Hi April,
    Actually, you need to create a STD UNIT, not a characteristic.
    You may see here how to do it:
    Re: 0Unit / se16 / CUNI
    Best regards,
    Eugene

Maybe you are looking for