CUP-5.3-Delete WF elements when several request are pending

Hi all,
Whenever I want to modify the WF elements, I have to archive all the request pending and then delete them for ensuring the modifying action. As long as I can download the audit trail for everyone, I wonder if is there any other way to proceed.
I mean, Which is the best practice to modify/update a WF or any of its elements?
How do you proceed whenever you want to update a Workflow element?
Any suggestion would be very welcomed! Many thanks in advance
Best regards,
Margarita

Margarita,
    You do not have to archive requests, if you need to change initiator/stage. Also, you can disable a path and create another path as the copy of this particualr path. To make changes to path definition or path-stage association, you will have to make sure that there are no open requests for that path.
If you just want to simplify all this then you can go to My work -> request audit trail and download Audit trail. Now, you can archive all those requests and make changes to the workflow. There is still an issue with this, if there is a cancelled request for that particular workflow, CUP would not allow you to make changes to workflow even after archiving requests.
Regards,
Alpesh

Similar Messages

  • Don't Delete My Elements when I change my cluster style

    See the picture below for an example of (what I consider to be) a frustrating "feature".
    Why delete the elements? Keep the elements and the element style types as is, just convert my cluster to the new style type.
    Arrays also do this, but since we tend to spend more time designing clusters, it's far more frustrating than arrays.

    I know the thread was linked to already, put to draw more attention to this I made a VI that should "Modernize" front panel contols in a VI.
    http://forums.ni.com/t5/LabVIEW/Replace-cluster-bug/m-p/3148093#M906580
    It works with Clusters and arrays replacing them, and their contents.  The code could be modified to just replace the cluster or array style leaving its contents, but the intent for me was to use it on API VIs that never are seen by the user, so replacing them all with modern was what I wanted.
    Still Kudo'd

  • With photoshop Element 13, when several photos are open it's impossible to chose which photo To print

    I have 1ç photos open and I create another picture to include many photos inside, then I want print this, normaly when you open the printing window this photo appear, but in this case only one photo appear on this window
    I try to select all calcs, to do only one calc without result
    If I close all others picture, then I can print good, but this problem is very very penalizing to work
    Have you a solution ??

    This problem appear with iMac and Mac OS X 10.10

  • Problems  with CS4 when several photos are open

    Hello all,
    I have a problem with Photoshop CS4. When I have several photos open, the borders of the underlying is shining through:
    This remains until I move the upper picture. Its a rather ennoying effect...
    My configuration is the following:
    Windows XP Professional SP3, Pentium 4 Dual 3.2 Ghz, 3.25 GB RAM, NVidia Quadro FX 1500, driver 6.14.11.8120, plenty of HD space, etc...
    Photoshop CS4 11.0.1
    Who can help?
    Thanks in advance, Dan

    What springs to the eye is that it's the UI elements (the frames around the images) not the pixel content, so I'd rule out any OpenGL issues. More likely it's a general memory shortage of the graphics system, which either is due to using excessive screen resolutions, another app stealing resources or a configuration problem. I would definitely check the NVidia panel and see, if you have not inadvertently toggled some critical setting. Furthermore look, whether some program is running in the background that may steal the screen buffer. Funnily, Corel Capture could be such a suspicious tool, if it's running all the time. Also turn off the rulers. There has been an issue with those and it may still not be fixed in the latest update. As a last thing to look into, of course make sure to get rid of any fancies you may be using, e.g. drop shadows on your windows, a desktop image, transparent window dragging and such. all those consume memory on the graphics card.
    Mylenium

  • How to display properties of a selected cursor when several cursors are available?

    I have a list of 8 cursors and would like to show the information of one cursor (which the user has slected) in the cursor legend of the graph. But I dont want to expand the whole cursor legend until all cursor properties are visible because it occupies too much space in the front panel.
    How do I get the index of the cursor the user has selected? I tried the "selected cursor" property but when I moved different cursors its value didnt change!

    I don't think it's possible to chagne the actual cursor legend. It is simple to create your own for just the active cursor. I've attached an example in LabVIEW 7.
    Attachments:
    Selected_Cursors.vi ‏43 KB

  • Phone crashes when several videos are recorded

    My wife has had her 3GS since December, in the past month she has been recording video clips to the tune of 1-3 per day. The phone crashes at least once per day if there are videos on it, does not crash if there are no videos. Her total storage usage on the device including videos is 3G (out of 16G total avail). I did a wipe, latest os, restore from backup and it had no impact. Has anyone else had similar problems? Should I make an appointment with the Genius Bar?

    Hi there,
    Exactly what happens when you reinstall the battery?
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

  • Manage a resource work load when several resources are assigned to the same tasks

    I think I am confusing myself!
    Basically I have multiple resources assigned to the same tasks throughout my schedule. I have levelled the schedule and here lies the issue. There are often instances where a resource will not have any work loaded for them for a long period, because they are
    waiting for another/other resources to become available before they can move on to the next task.
    There are also lots of days where they are working but not being fully utilised too.
    Is this simply because we have too many resources assigned to the same tasks and there is no way around the issues we are finding? 
    Can you offer a solution that doesn't involve creating the same task 4 times (if 4 people are working on it at the same time) and assigning them all individually to the duplicated tasks? the schedule will be so long if I have to do this.
    Any help you can offer would be much appreciated
    Thanks
    Jo
    J Day

    Jo,
    Please do not post the same question to multiple forums.  The same volunteers follow most all of the forums.
    Your question is being answered (for the second time) at:
    http://answers.microsoft.com/en-us/office/forum/office_2010-project/ms-project-resource-query-urgent/5bf44f73-22cc-4d40-be15-0d6f111cd299

  • CUP-SPM, when user request FFid

    Hi,
    GRC CUP-SPM,Approver cannot see ffid when requestor request ffid.Approver has to select the ffid then approve/reject the request. In request type config - SUPER_USER_ACCESS is active with action SUPER_USER_ACCESS and intitiator with priority and request type(superuser access).Is there any change i need so approver can see the request ffid access.
    Thanks
    Shahed
    Edited by: mouhed shahed on Aug 18, 2010 4:33 PM

    Hello Shahed -
    The FF IDs will be displayed to the approver in the 'Superuser Access' tab of the request approval page.  Are you sure that the approver is checking there instead of the 'Roles or Profiles' tab that is used for most other CUP requests?
    - Rob Robeson

  • HT201493 Is there a way to know when someone requests my location?

    When a n authorized friend is trying to find my location through Find Friends, a request is sent to my device which then reports it's location. Is there a way for me to find out when such request are made to my iPhone?

    Hi,
    If u know the extractstructure, then setup table will be extract structure name followed by SETUP.
    for ex: Extract Sturcture is xxxx.then setup table is xxxSETUP.
    regards

  • My hard drive crashed. Lost Photoshop 11 software. When hard drive fixed, I bought and downloaded Elements 12. Trying to get photos in 12. All I have had for several hours are hour glasses. Photos are there if you click on hour glass, but cannot get photo

    My hard drive crashed. Lost Photoshop 11 software. When hard drive fixed, I bought and downloaded Elements 12. Trying to get photos in 12. All I have had for several hours are hour glasses. Photos are there if you click on hour glass, but cannot get photos to show up on the grid. What should I do?

    Thank you. Unfortunately I have  very limited technical skills.I am not sure what some of your suggestions relate to and the others I would not know how to do. But I do appreciate your respnse. A good start might be if you could tell me how to turn off face recognition. Thank you again

  • TS1702 several App's frozen just locked on Waiting or installing ? Deleted app but when you go to App Store still there installing

    My wife's iPad has several app's frozen they just say installing, I have deleted them but when you go to reinstall the app it still shows installing how do you unlock
    The installing or waiting, iPad is still connected to wifi

    Update/Download the apps using iTune (computer) and sync to iPad.

  • I just downloaded the latest version of firefox (5.0). Can I delete all the older versions that are still on my drive? 2) When I call up some web sites sometimes the web site comes up 3 or 4 times...how do I stop this from happening?

    I just downloaded the latest version of firefox (5.0). Can I delete all the older versions that are still on my drive?
    When I call up some web sites sometimes the web site comes up 3 or 4 times...how do I stop this from happening? For example if I click on a link the exact same link comes up 3 or 4 times and I have to manually delete all of them but one.

    Do you organise your email into separate folders, or do you just let it accumulate in the Inbox?
    I would strongly advise you not to let it sit in the Inbox.
    When you see this happening, try right-click on the affected folder, select '''Properties''' then '''Repair Folder'''.
    Large folders (actually, a folder in Thunderbird is stored as a file, so it is sensitive to file size limits set by the underlying file system) can be problematic. This is one reason not to let messages collect in one folder. I use Thunderbird's Archive folders so that accumulated mails over several years can happily coexist because they are effectively stored in many small folders. No single mail store folder then exceeds the 2GB or 4GB sizes that have been known to stress the OS. I appreciate that current builds of Thunderbird and a modern 64-bit OS should be able to cope, but practically I find it slows down when given huge files, so I err towards a pragmatic solution; a large number of not very big files.
    Archives are searchable, and a Saved Search folder can give you a virtual composite folder allowing access to the entire Archive.

  • HOW TO DELETE DUPLICATE ELEMENT IN A VECTOR

    Hi everybody!
    If I've a vector like this vectA={apple,orange,grape,apple,apple,banana}
    and I want final result be vectB={apple,orange,grape,banana}.
    How should I compare each element in vectA and delete duplicate element. Like here duplicated element is apple. Only one apple remain in the vectB.
    Any help,
    Thanks.

    Hello all. Good question and good answers, but I would like to elaborate.
    To begin with, you specifically asked to map the following:
    {apple,orange,grape,apple,apple,banana} ==> {apple,orange,grape,banana}
    Both of cotton.m's solutions do NOT do this, unfortunately. They are both useful in particular cases though, so think about what you're trying to do:
    cotton.m's first solution is best if order does not matter. In fact, as flounder first stated, whenever order doesn't matter, your most efficient bet is to use a Set instead of a List (or Vector) anyways.
    Set vectB = new HashSet(vectA);This code maps to {banana, orange, grape, apple}, because HashSets are "randomly" ordered.
    cotton.m's second solution is good if you want to impose NEW ordering on the List.
    Set vectB = new TreeSet(vectA);This code maps to {apple, banana, grape, orange}, because TreeSet uses alphabetical-order on Strings by default.
    java_2006, your solution is the most correct, but it's a little verbose for my taste :)
    more importantly, the runtime-efficiency is pretty bad (n-squared). calling Vector.contains performs (at worst) n comparisons; you're going to call it n times! Set.contains usually performs 2 comparisons (constant, much better), so I suggest you USE a Set to do the filtering, while still sticking with your good idea to use a List. When the ordering is "arbitrary" (so can't use TreeSet) but still relevant (so can't use HashSet), you're basically talking about a List.
    I think saving A LOT of time is worth using A LITTLE extra space, so here, let's save ourself some runtime, and some carpal-tunnel.
    import java.util.*;
    class Foo {
         public static void main(String[] args) {
              String[] fruits = {"apple","orange","grape","apple","apple","banana"};
              List     l = Arrays.asList(fruits),
                   m = filterDups(l);
              System.out.println(m);
         // remember, both of the following methods use O(n) space, but only O(n) time
         static List filterDups(List l) {
              List retVal = new ArrayList();
              Set s = new HashSet();
              for (Object o : l)
                   if (s.add(o))
                        retVal.add(o);     // Set.add returns true iff the item was NOT already present
              return retVal;
         static void killDups(List l) {
              Set s = new HashSet();
              for (Iterator i = l.iterator(); i.hasNext(); )
                   if (! s.add(i.next()))     
                        i.remove();
         // honestly, please don't use Vectors ever again... thanks!
         // if you're going to be a jerk about it, and claim you NEED a Vector result
         // then here's your code, whiner
         public static void mainx(String[] args) {
              String[] fruits = {"apple","orange","grape","apple","apple","banana"};
              List l = Arrays.asList(fruits);
              Vector v = new Vector(l);
              killDups(v);
              System.out.println(v);
    }

  • Not able to delete text elements.

    Hello
    I copied a z report from production server to development server by copying the code in se38.
    now system is no allowing me to delete a text element for parameter.
    SELECTION-SCREEN BEGIN OF BLOCK b4 with frame title text-012.
    PARAMETERS: P_YEAR  TYPE GJAHR OBLIGATORY DEFAULT 2014,       " Year
                 P_MONTH TYPE FCMNR AS LISTBOX  VISIBLE LENGTH 20 ,      " Month
                 P_COMP  TYPE BUKRS OBLIGATORY DEFAULT 1000.       " Company Code
    SELECT-OPTIONS S_PLANT FOR  vbrp-werks." Plant
                """PARAMETERS: P_FKART  AS CHECKBOX .             " Billing Document
    SELECTION-SCREEN END OF BLOCK b4.
    here my requirement is to disable PARAMETER : P_FKART and disable corresponding text element in system.
    i tried:
    1. deleting the text element row for p_fkart but it appears again when i save the text element.
    2.commenting the complete selection block and writing new selection block with text-012.system is taking same text element when i double click.
    thanks.

    Hi faizur,
    first of all: Programm changes are made in development system. not in produktion System. the transport oder is development system -> quality system -> production system.
    in your first statement above, you wrote
    "i tried commenting every line,which contains p_fkart.But system is not allowing me to activate the program."
    why shouldn't you be able to activate a programm when it is not caused by a syntax error?
    I mean deleting a selection-parameter from the selection-screen is basic stuff... as written above you normaly dont delete, you set it as "NO DISPLAY".
    when you got your programm activated again (and got rid of all the syntax errors you caused with the deletion) . Dont forget to activate the Text-Elements as well and it should work...
    regards
    Stefan Seeburger

  • Deleting array elements

    Hi!
    I have a problem with my program. i have an array and in this array a several numbers. With the "In Range and Coerce" function i want to prove if the the array element is inside or outside of my limitations. If my array element is in the outside of my limitation, the code in the case structure should delete this element.
    I need this program, because the array is displayed on a graph and i want only display the date, which is in the limitations.
    I hope somebody could help me!
    Best regards,
    Peter
    Labview 7.1 on Windows 2000
    Attachments:
    array.jpg ‏54 KB

    Hallo Peter
    Das Problem tritt auf, weil du immer wieder das selbe Array liest.
    Die Knoten am Loop sollten Shift-Register sein, damit das Array, bei dem das Element gelöscht wurde, bei der nächsten Iteration gelesen wird. Allerdings musst du dann auf einen While-Loop umstellen, da du ansonsten Elemente lesen willst, die es im Array nicht mehr gibt.
    Anbei eine mögliche Lösung.
    Hoffe es hilft weiter.
    Thomas
    Using LV8.0
    Don't be afraid to rate a good answer...
    Attachments:
    RemoveElements.vi ‏32 KB

Maybe you are looking for