CUP 8 Support for Exchange 2010 Calendaring
Will Unified Presence 8.5 support Exchange 2010 calendaring?
Thanks!
Jeff
That's the plan. Nothing is guaranteed until it reaches FCS though.
Similar Messages
-
Can IDM 8.1 support MS Exchange 2010 ?
Hellos
Is there ANY way we can introduce Exchange 2010 support into our IdM solution?
Customers are migrating directly from Exchange 2003 to Exchange 2010.
What is the status re Active Directory "connectors" is there any sort of IdM migrating tool to switch from AD Gateway approach to AD Connector.
What we are faced with is the sudden REWRITE of ALL AD provisioning.
a pissed off GFHi everyone.
I did a little bit more digging and found the following piece of information that I think you'll all find beneficial.
A few months ago one of my customers asked the following:
If a customer is planning on using the Active Directory connector with Exchange 2007 support
enabled, how will that affect IDM provisioning to Exchange 2010? Is that a configuration that's
supported?
I then received the following answer:
The connector provides the same functionality for Exchange 2010 that it did for Exchange 2007 (no
more, no less).
See the connector documentation for specifics: http://wikis.sun.com/display/IdentityConnectors/Exchange+Connector
What is doesn't do is support specific 2010 functionality (such as the ability to set Out of Office
Messages, that used to exist pre Exchange 2007 and was added back in for Exchange 2010).
Having said that, there is still the issue of the 8.1.1 release notes not stating specific support for Exchange 2010.
But for all intents and purposes, I've seen a few indications that it should work without issue. I am currently awaiting clarification on the subject, which I will be sure to post once I receive it.
I hope this helps.
Regards,
Alex -
Outlook 2007 Clients Cannot Access Free/Busy Calendar info. for Exchange 2010 Mailbox
Hi:
I have Outlook 2007 clients that cannot access Free/Busy Calendar info. for Exchange 2010 mailboxes. They receive error like "...you do not have appropriate permissions..."
If those same users logon to a machine running Outlook 2010 then they can view the free/busy info. of the other user's mailbox, so I believe the permissions are set correctly on the mailbox to allow the viewing.
Any insights are greatly appreciated!
Thank you!
Bob Herman IT TropolisHi Herman,
As you said, it seems users have proper permissions on mailbox.
Please make sure users has Reviewer permission on Outlook 2007.
Please try to run Outlook 2007 under safe mode or re-create profile.
Also try to turn Outlook 2007 to Exchange Online mode from Cached mode.
Thanks
Mavis Huang
TechNet Community Support -
Support Forefront Protection 2010 for Exchange 2010 SP3
Hi
I have a simple question: Is there a full support of FPE 2010 (Version 11.0.727.0) for Exchange 2010 SP3 (and Rollup Updates)?
ThomasHi,
It seems that FPE 2010 for exchange 2010 SP3 is supported and you need to install the Rollup 4. For more detailed information, please refer to the link below:
Hotfix Rollup 4 for Microsoft Forefront Protection for Exchange
Updates for Microsoft Forefront and Related Technologies
Hope this helps!
Susie -
How to set default website for exchange 2010
I'm unable to launch the Exchange Management Console, and then I read that it's necessary to set the default web site in a particular way, in order for Exchange 2010 Management Console to work:
http://social.technet.microsoft.com/Forums/en/exchange2010/thread/4d396628-3867-4c95-9541-e0eb021e0135
However, after setting up Sharepoint, I see that it has modified the default website, and I'd like to ask for specific settings on how the default web site bindings should look (for exchange). Could someone please advise what I need to do to correct it?
I'm having trouble interpreting what Mike Crowley recommends in the linked post above, in terms of actual steps to the site binding information (which won't mess up what exists).
Currently it says:
Type port ip address binding information
net.tcp
808:*
net.pipe
net.msmq localhost
msmq.formatname localhost
http 80 127.0.0.1
https 443 *
http 80 *
https 443 127.0.0.1
It seems the line for http on port 80 is *, which I guess is equivalent to 'all unassigned'. Is the previous http port 80 binding to 127.0.0.1 causing the problem?
But I'm also supposed to set a Powershell VDir in IIS. Can someone provide steps for that?Regarding SharePoint on Exchange:
It was not allowed earlier, as documented here:
http://office.microsoft.com/en-us/sharepoint-portal-server-it/coexistence-and-interoperability-guide-for-sharepoint-products-and-technologies-HA001160777.aspx & here:
http://support.microsoft.com/kb/825505 but there doesn't seem to be anything more recent than this. I would work under the assumption it is not supported outside of
SBS 2011 (which I am not very familiar
with).
Mike Crowley
Check out My Blog! -
Is WMF3 or WMF4 supported in Exchange 2010 SP3 UR5 installed on Server 2008 R2 SP1?
We'd like to upgrade WMF (aka powershell) on our Exchange 2010 servers but I haven't been able to find any updated information on support with the most recent servicepack/update rollup.
Is installing WMF3 or WMF4 supported on Server 2008 R2 SP1 w/ Exchange 2010 SP3 UR5?WindowsPowerShell 3.0 is supported. Haven't seen 4.0 running for exchange 2010 on 2008 R2
http://blogs.technet.com/b/heyscriptingguy/archive/2013/11/30/weekend-scripter-wmf-powershell-and-exchange-server-compatibility.aspx
http://blog.crayon.no/blogs/janegil/archive/2013/11/17/how_2D00_to_2D00_install_2D00_windows_2D00_powershell_2D00_4_2D00_0.aspx
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Gulab,
Where did you read that WMF3 is supported on Exchange 2010 SP3 on Server 2008 R2?
Neither of the links you pasted suggest that and in fact explicitly say "There has been no testing with ExchangeServer 2010 SP3 and WMF 3.0 installed on Windows Server 2008 R2."
My Bad, that was TYPO...
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
How to do the hard recovery for exchange 2010 (No Restore.env generated)
enrollment:Windows server 2008 R2, exchange 2010.
I want to test the fundamentally of eseutil /cc
so I backup the exchange database by Using the Windows backup, then I restore the database, and no Restore.env be found.But I found I can run the
eseutil /r.
what's happened?
1,why No Restore.env generated for exchange 2010 in Windows server 2008 r2?
2,why I can do the soft recovery after the restoring the database?
3, how to do the hard recovery for this situation(No Restore.env )?
Please click the Mark as Answer button if a post solves your problem!Hi Eric,
From your description, I would like to clarify the following things:
1. Before performing the restore process, we need to dismount the Exchange databases that we want to restore. If the database is still mounted, the restore process will fail. If the restore process doesn't succeed, Restore.env won't be generated.
2. It is because the log files are healthy, you can run Eseutil/r and perform soft recovery.
3. In your case, you can continue to perform the soft recovery.
For more information about hard recovery and soft recovery, here are some helpful threads for your reference.
Exchange Server Soft and Hard Recovery
http://technet.microsoft.com/en-us/library/aa996168(v=exchg.65).aspx
Exchange Database Recovery – Using eseutil commands (Note: It isn't from Microsoft, please pay attention to refer to it.)
http://msexchangeguru.com/2009/07/12/exchange-database-recovery-using-eseutil-commands/
Hope it helps.
If there any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support
" If the restore process doesn't succeed, Restore.env won't be generated. "
thank you for you reply.The restore process succeed,otherwise I can't do the soft recovery after the restoring the database,but can't see the restore.env
Please click the Mark as Answer button if a post solves your problem! -
Mails blocked in queue the moment forefront for exchange 2010 started
Hi,
We have newly installed Forfront protection 2010 for Exchange 2010 installed in our exchange 2010 Edge Server.
Mails got struck in the Queue immediatly after the forefront installations.
Mailflow works properly one we unhook the forefront from Exchange.
need to enable the forefront. Got struck in these. How to proceed up further.
Thanks,
PradeepHi,
Please compare your configuration with the following blog or video. These might help.
http://araihan.wordpress.com/2010/03/15/forefront-protection-2010-how-to-install-and-configure-forefront-protection-2010-for-exchange-server-2010step-by-step/
http://www.youtube.com/watch?v=b2BgTmeXwUs
(Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Forefront for exchange 2010 - how long?
Hi there.
Read this article: http://blogs.technet.com/b/server-cloud/archive/2012/09/12/important-changes-to-forefront-product-roadmaps.aspx
I would have additional question.
Our company is MS Gold Partner and we need to renew our yearly license every year around AUGUST.
We are thinking about changing our SPAM filter external gateway with exchange edge, but as we can see from that article, you Will be unable to renew it license after December 2015.
I know that Microsoft offers online Forefront protection but that is not option in our case because of data sensitivity.We need an answer how long we Will be able to get updates regarding forefront for exchange 2010 and be licensed ok?
I guess after 2015 december Forefront Exchange 2010 Will no longer recieve spam updates thru Windows update, right?
And also engines Will not be updated after that date?
Is this the correct view and understanding?
with best regards
bostjancHi Bostjanc,
>>how long we Will be able to get updates regarding forefront for exchange 2010 and be licensed ok?
I think you must have seen the information below in that blog.
For current customers, Microsoft will continue to support the subscription through Dec.31, 2015. If customer subcriptions expire before Dec.31, 2015, and annot be renewed because the product is no longer offered, these products will continue to be supported
through that date in order to provided with customers sufficient time to move to alternative solutions.
You could also check the following blog.
License extension for End-of-Life Antigen/Forefront products
Note: Microsoft provides third-party contact information
to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
If the information above still cannot resolve your questions, please contact Microsoft to get definitive answers.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Uninstall Forefront for Exchange 2010
I have acquired another spam filter appliance that will used instead of Forefront for Exchange 2010.
How do I uninstall Forefront for Exchange 2010 without any issues while still using Exchange 2010.
Basically the email will go through the email appliance filter then to Exchange. I want to deactivate or uninstall Forefront for Exchange with impacting my email services. Is it as simple as just uninstalling it?Hi,
About uninstalling Forefront for Exchange 2010, you could check the following article.
If spam filtering was enabled, the configurations in the corresponding antispam settings in Microsoft Exchange that were leveraged by FPE will be retained by their Exchange antispam counterparts after FPE is uninstalled. These settings include: Connection
Filtering, Sender ID Filtering, Sender Filtering, and Reciepient Filtering. To change these configuration settings you will need to modify them through the Exchange management console.
Uninstalling Forefront Protection 2010 for Exchange Server
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
SOFS support for Exchange Server 2013
Hi all,
I am aware of the following factors:
1. Exchange only supports block-level storage
2. Using SoFS as DAG FSW is not supported.
But may I confirm whether Microsoft supports the scenario below?
==============================================
My client has one set of Windows 2012 R2 Scale-Out File Servers to support their hyper-V farm. Storage is Dell MD3000 with Windows 2012 R2 Storage Space. Is it supported by Microsoft to run Exchange Server 2013 and Exchange Server 2010 in the virtual machines
which are running on SoFS? Assume IOPS has been properly sized.
==============================================
Regards,
William
William YangHi,
There is no official documents talked about whether the Windows server 2012
Scale-Out File Server is supported for Exchange 2013 and Exchange 2010.
Generally, the supported storage configuration in Exchange 2013 is listed in the article below:
https://technet.microsoft.com/en-us/library/ee832792(v=exchg.150).aspx
Hope it helps.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support -
Critical event Ids for exchange 2010
I need a list if critical event ids for exchange 2010 which should be monitored regularly. So that a script can be scheduled to report if in case any of these event ids are encountered. I have complied a list below and request you guys to add on this list.
Event ID Message
1004 Unable to start the Microsoft Exchange Information Store. Disk is full.
1022 Database is damaged. This means that online backup cannot complete because the database is damaged.
1034 The disk associated with cluster disk resource driveLetter could not be found. The expected signature of the disk was diskSignature.
5001 Unable to initialize the Microsoft Exchange Information Store service. Disk is full.
9518 Error 0xfffffb40 starting Storage Group /DC=COM/DC=TEST/CN=CONFIGURATION/CN=SERVICES/CN=MICROSOFT EXCHANGE/CN=MICROSOFT/CN=ADMINISTRATIVE GROUPS/CN=AG1/CN=SERVERS/CN=SERVER1/CN=INFORMATIONSTORE/CN= FIRST STORAGE GROUP on the Microsoft Exchange Information
Store.
9555 Corrupt Message detected during MoveMailbox. Fid = folder id; Mid = message id; Some or all properties of this message will not be moved correctly.
9559 The log disk is full for storage group "name". Attempting to unmount all databases in this storage group.Hi Striker11,
Thank you for your question.
I agree with Martin. We should find a tool to monitor those errors or warning. Because there are many Event IDs in Exchange 2010. If those errors or warnings are both important for Exchange maintenance. If Exchange 2010 update to Exchange 2013, we will still
use tool to monitor it and not modify the script.
We could download SCOM by the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=2268
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support -
Latest Update Rollup for Exchange 2010 SP3
Hi
Currently we are using RU2 for Exchange 2010 SP3. We are facing an issue with OWA through IE 11 (no support for premium). To correct this issue it's recommended to install RU3. Here we are asking the expert opinion about installing RU7
on all Exchange 2010 servers and whether it makes any different issues or is it enough to install RU3
Thanks in advance
LMSHi
Currently we are using RU2 for Exchange 2010 SP3. We are facing an issue with OWA through IE 11 (no support for premium). To correct this issue it's recommended to install RU3. Here we are asking the expert opinion about installing RU7
on all Exchange 2010 servers and whether it makes any different issues or is it enough to install RU3
Thanks in advance
LMS
Personally, if you are going to update the servers, you should apply the latest RU regardless. So I would go with RU7.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
After ICS update, stock email not syncing for exchange 2010 activesync.
After ICS update, stock email not syncing for exchange 2010 activesync.
My corporate email which was flawlessly working before ICS update. Even though I tried re-creating a new account, it hangs "waiting for sync"
Has any patch been released or explicit instructions have been provided ?
First sync:
5/3/2012 7:47 PM
Last successful sync:
Not Available
Folders synced:
0
Device name:
Not Available
Device model:
MT11i
Phone number:
Not Available
Mobile network:
Not Available
Device type:
Android
Device ID:
xxxxxxxxxxxxxxxxxxx
Device IMEI:
Not Available
Device OS:
Android 4.0.3
Device language:
Not Available
User agent:
Android/4.0.3-EAS-1.3
Access state:
Access Granted
Access set by:
Global Permissions
Policy applied:
Active Sync Policy - Partially applied
Policy updated:
5/5/2012 8:11 AM
ActiveSync version:
14.1
Also at http://talk.sonymobile.com/message/184221
Whyr is this defect "assumed answered" ? I went though all the posts and didnt find any solution?Hopefully my reply to this can help.
http://talk.sonymobile.com/message/190149#190149
And please try to keep same problem in same thread.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
When I installed Rollup 8 for Exchange 2010 SP2 it caused an error in EWS
EWS failed with the error:
exchange web service could not load file or assembly Exchange.MailboxReplicationService.ProxyService bad parameter
When I uninstalled the rollup all worked fine again.
Any ideas, Thanks in advance?Hi,
To apply this update rollup, you must have Exchange Server 2010 SP2 installed. And remove all interim updates for Exchange Server 2010 SP2 before you apply this update rollup. Please check your installation deployment by the following article:
Install the Latest Update Rollup for Exchange 2010
http://technet.microsoft.com/en-us/library/ff637981.aspx
Description of Update Rollup 8 for Exchange Server 2010 Service Pack 2
http://support.microsoft.com/kb/2903903/en-us
If all requirements and preparations are configured properly, please collect your error logs to check your installation. It would be helpful to post some event logs here for further analysis.
Thanks,
Winnie Liang
TechNet Community Support
Maybe you are looking for
-
Report for purchase requisition, purchase order and schedulling agreement.
Hi, thanks for your help. I need a report or query just to view in one screen the related docs. as purchase requisition, purchase order and schedulling agreement. I don´t know if there is a table or trx. with that information. Is it possible to get t
-
How do i delete one of my folders in Itunes Library
Hi im having a problem with my itunes library. I was messing around on Itunes and i found the "Add file to library" button and I clicked it because I wanted to move my music from my file folder to itunes and i went to sync the music and a pop up come
-
After editing in Photoshop, unable to save
I'm on a Mac, using LR 3.2 and Photoshop CS4. My image files are on a network drive. Catalog of course is local (since we can't work with networked catalogs). If I right-click a PSD (not raw file) in Lighroom and "Edit in Photoshop", then edit, when
-
My new macbook pro (lion) iCal has been showing the wrong date?
My new macbook pro (lion) iCal has been showing the wrong date for stored events - even though i have put the appointment in on the right date when I look it up a week or so later it has changed? I think it might be showing 2011 date? How can i fix t
-
How do I switch to the Singapore store in my iPhone 4 to update my purchased apps. Somehow now I am in the US store and cannot get out. I think this happened when I tried to buy a CD for sale in the US store