CUP connector configuration issue
It is mentioned in the Configuration guide that, the connector that is used for RAR (corresponds to a backend system) should be used for CUP aswell.
But, when i create a connector in webdynpro->content administration,
RAR is showing the connector name(s) in the following syntax (even though we create multiple connectors with different names under content administration for same backend system):
<message server name>_<system name>_<client number>
where as CUP is showing the connector name same as that of content administration.
now, my questions are
Q1) how to know which connector is being used by RAR out of multiple connectors defined under content administration, so that I can use the same for CUP also.
Q2) Do we need to select model connector or metadata connector for CUP?
Q3) Do we need to select VIRSAR3 connector or VIRSAXSR3 connector for CUP?
don't get confused between connector name in content admin and one refered to by CUP & RAR Config guide.
<<<< It is mentioned in the Configuration guide that, the connector that is used for RAR (corresponds to a backend system) should be used for CUP aswell.>>>>
the connector name refer is the the one which you create inside CONFIGURATION TAB of RAR & CUP.
it is called VSYSKEY in VIRSA_CC_SYSTEMC table.
both the name should be exactly same (case sensitive....... maya be......)
best is that it should be same as SID or SIDCLNT
<<<<<<<Q2) Do we need to select model connector or metadata connector for CUP?>>>>>>>>
<<<<Q3) Do we need to select VIRSAR3 connector or VIRSAXSR3 connector for CUP?>>>>>
these are used for JCO connection. and JCO connection are used only by RAR.
when defining system inside Configuration tab of RAR you have option to select 'connection type'.
'connection type' can be Adaptive RFC , then you select JCO connection defined for that System in next drop down.
please refer to Config guide for RAR for more detail.
other option is 'SAP JCO' if you select this then you have can give all details of server , client, user id and password and create or defined system inside RAR (this is what is refered as connector by all config guides or CUP and RAR)
regards,
Surpreet
Similar Messages
-
KM DMS connector: Configuration issue
Hi experts,
I follow this thread to configure my DMS connector:
https://forums.sdn.sap.com/thread.jspa?threadID=1411690&messageID=7884645
After that, i've moved to KM contents -> dms folder. Unfortunately, i've got the following error:
Exception Class: class java.util.MissingResourceException
Exception Message: Can't find bundle for base name com.sap.pct.plm.dmsrmconnectorforkm.modeledproperties, locale en
Could you provide me more information about this issue?
Points if helpful.
Regards,Hi,
Some suggestoins about my issue?
More precisions: First time i've tested my connector it work correctly (no error) However, i can't see only "Dynamic folder". After some modifications on my connector configuration: variant and default storage I've got the previous error.
Even come back to initial configuration i continue to get the same error.
I hope my information will be helpful.
Regards -
Weblogic Tuxedo Connector configuration issue
Hi all,
I must implement a client app in Java running over Weblogic 9.23 to connect to a Tuxedo service using WTC (Weblogic Tuxedo Connector).
I'm using JATMI api based in this schema:
public String Toupper(String toConvert) throws TPException, TPReplyException {
Context ctx;
TuxedoConnectionFactory tcf;
TuxedoConnection myTux;
TypedString myData;
Reply myRtn;
int status;
try {
ctx = new InitialContext();
tcf = (TuxedoConnectionFactory) ctx.lookup("tuxedo.services.TuxedoConnection");
catch (NamingException ne) {
// Could not get the tuxedo object, throw TPENOENT
myTux = tcf.getTuxedoConnection();
myData = new TypedString(toConvert);
try {
myRtn = myTux.tpcall("TOUPPER", myData, 0);
} catch (TPReplyException tre) {
throw tre;
} catch (TPException te) {
throw te;
} catch (Exception ee) {
throw new TPException(TPException.TPESYSTEM, "Exception: " + ee);
myData = (TypedString) myRtn.getReplyBuffer();
myTux.tpterm(); // Closing the association with Tuxedo
return (myData.toString());
The point is the Tuxedo service provider gave me some examples written in C (not Java) which use TPINIT structure to supply programatically authentication params (usrname, grpname, cltname, ...) before starting the connection and calling tpcall().
Where do these params enter the model above? Should they be supplied programatically inside my client code or should they be configured in WTC?
Any help will be highly appreciated, many thanksHi:
This information is done under-the-covers through configuration:
"Security and client authentication is provided by configuring the Remote TDM and Imported Services MBean components of a WTCServer MBean. This pathway is created when the WebLogic Server is started and a WTCServer MBean is present in the config.xml file and assigned (targeted) to a server."
http://docs.oracle.com/cd/E13222_01/wls/docs91/wtc_atmi/Clients.html
Using WTC you are trying to call Tuxedo services through Tuxedo domains. Your Tuxedo service provider should have domains configured and provide you with
configuration information to define the remote access points and the services that are provided those those remote access points. Your WTC local access point will become
a remote access point to your service provider's domains.
Here is the WTC admin guide link:
http://docs.oracle.com/cd/E13222_01/wls/docs92/wtc_admin/index.html
If your Tuxedo service provider does not have domains configured then you can not use WTC. You will need to find out what ways they allow remote connections to access their Tuxedo services.
Regards,
Bob Finan -
Introduction
The Connector software for the Windows Server Essentials OS connects the computers in your network to the Windows Server Essentials server. When you connect computers to the server via Connector
software, it will help you to automatically back up the computers and monitor their health. Meanwhile, you will be able to configure and remotely administer the Windows Server Essentials server. The Connector software is installed when you connect a client
computer to the server. You can start by typing http://<your_server_name>/connect
Example: Windows 8.1 connects to Windows Server 2012 R2 Essentials
1. Open the Dashboard on Windows Server 2012 Essentials, navigate to USERS tab. Right click and select Add a user account (Figure 1). Then follow the Add a User Account wizard to configure
and add the user account (Figure 2).
Figure 1: Add a user account -1
Figure 2: Add a user account -2
2. Logon the client computer, type the http://<your_server_name>/connect in IE. Then you will see the download page for Connector software (Figure 3).
Figure 3:Download the
Connector software
3. Click Download software for Windows and download the Connect software (ComputerConnector), then run it.
After restart automatically, please follow the Windows Server Essentials Connector Configuration Wizard (Figure 4 – Figure 7).
Figure 4: Windows Server Essentials Connector Configuration Wizard -1
Figure 5: Windows Server Essentials Connector Configuration Wizard -2
Figure 6: Windows Server Essentials Connector Configuration Wizard -3
Figure 7: Windows Server Essentials Connector Configuration Wizard -4
4. When complete the configuration wizard and logon the client computer, you will be able to use the Launchpad (Figure 8).
Figure 8: Launchpad
5. Meanwhile, when you open Dashboard, will be able to find that the Windows 8.1 is listed under DEVICES. It will help administrators to manage the client computer (Figure 9).
Figure 9: Clients listed in the Devices panel
For Windows XP
You can type http://<your_server_name>/connect in IE. Then the download page will appear (Figure 10).
Figure 10: Download page
However, it will encounter the error: “xxx.exe is not a valid Win32 application” (Figure 11).
Figure 11: Error message on Windows XP
Windows XP is not a supported OS for client computer. For more details, please refer to
Get Connected in Windows Server Essentials.
In addition, please note:
Microsoft ended support for Windows XP on April 8, 2014. This change has affected your software updates and security options.Checklist for the configuration issues
First of all, when we want to connect the client computers to Windows Server Essentials, please check if the date and time settings for the client computer is consistent with the server.
Meanwhile, please also check the Regional and Language settings.
Issue 1: Installation did not succeed
When accept the license terms to continue in the configuration wizard, you may encounter the error (Figure 12).
Installation did not succeed
Windows Server Essentials Connector has not been installed because:
Cannot download the package.
Verify that your device is connected to the Internet, and then install the Windows Server Essentials Connector.
Figure 12: Installation did not succeed
Checklist:
1. Verify the DNS client settings.
2. Check the communication between DNS server and the client.
3. Check if you can ping server via IP address and server name successfully
Issue 2: Cannot connect this computer to the network (Network related)
This computer is already connected to another Windows Server network. Before connecting this computer to the Windows Server Essentials network, you must remove this computer from the
current network.
To resolve this issue, contact the person responsible for your network.
Figure 13: Cannot connect this computer to the network (Network related)
Checklist:
1. Check if the client computer is a member of another server network.
2. Change the client computer to Workgroup via administrator. Then check if you can connect it to the new Windows Server Essentials network.
Issue 3:
Cannot connect this computer to the network (Account related)
The computer cannot be connected to the server using the user name and password credentials provided. This may be because an existing computer account having name “ComputerName” was previously
created using a different set of credentials. Rename this computer and then try to connect this computer to the server again, or contact your administrator to remove any old conflicting account.
When you connect the client computer to server essentials with a new user account, please check if the client computer has been connected to the server essentials, and didn’t remove from
Dashboard. You may encounter the following error.
Figure 14: Cannot connect this computer to the network (Account related)
Checklist:
1. Check if the client computer has been connected to the server essentials, and didn’t remove from Dashboard.
2. Remove the client computer from the Dashboard, then try again.
Additional resource:
Troubleshoot connecting computers to the server in Windows Server Essentials
Windows 2012 Server Essentials ConnectComputer
Troubleshooting -
Error in GTC when trying to modify connector configuration
Hi ,
I'm getting the following error when I'm trying to perform step 3: Modify Connector Configuration.Earlier it was working fine.Now only the error started coming..
[2012-01-17T15:20:40.761+05:30] [oim_server1] [ERROR] [] [XELLERATE.WEBAPP] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 0000JJf4p0OFw000jzwkno1F5K6v00001K,0] [APP: oim#11.1.1.3.0] [dcid: 11d1def534ea1be0:79391581:134eb0b17ff:-7ffd-000000000000005d] Class/Method: CreateGenConnectorAction/imageScreen encounter some problems: An error occurred while generating the image representing the OIM datasets[[
com.thortech.xl.gc.exception.ImageGenerationException: An error occurred while generating the image representing the OIM datasets
at com.thortech.xl.gc.util.ImageGenerator.generateImage(ImageGenerator.java:769)
at com.thortech.xl.webclient.util.UIFacade.getImage(UIFacade.java:2299)
at com.thortech.xl.webclient.actions.CreateConnectorAction.imageScreen(CreateConnectorAction.java:1250)
at com.thortech.xl.webclient.actions.CreateConnectorAction.goNext(CreateConnectorAction.java:521)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:269)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(tcLookupDispatchAction.java:133)
at com.thortech.xl.webclient.actions.tcActionBase.execute(tcActionBase.java:894)
at com.thortech.xl.webclient.actions.tcAction.execute(tcAction.java:213)
at com.thortech.xl.webclient.actions.CreateConnectorAction.execute(CreateConnectorAction.java:135)
at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1914)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:463)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at com.thortech.xl.webclient.security.XSSFilter.doFilter(XSSFilter.java:103)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at com.thortech.xl.webclient.security.CSRFFilter.doFilter(CSRFFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.iam.platform.auth.web.PwdMgmtNavigationFilter.doFilter(PwdMgmtNavigationFilter.java:116)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.iam.platform.auth.web.OIMAuthContextFilter.doFilter(OIMAuthContextFilter.java:101)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Please help me out with this issue.
ThanksHi ,
I'm getting the following error when I'm trying to perform step 3: Modify Connector Configuration.Earlier it was working fine.Now only the error started coming..
[2012-01-17T15:20:40.761+05:30] [oim_server1] [ERROR] [] [XELLERATE.WEBAPP] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 0000JJf4p0OFw000jzwkno1F5K6v00001K,0] [APP: oim#11.1.1.3.0] [dcid: 11d1def534ea1be0:79391581:134eb0b17ff:-7ffd-000000000000005d] Class/Method: CreateGenConnectorAction/imageScreen encounter some problems: An error occurred while generating the image representing the OIM datasets[[
com.thortech.xl.gc.exception.ImageGenerationException: An error occurred while generating the image representing the OIM datasets
at com.thortech.xl.gc.util.ImageGenerator.generateImage(ImageGenerator.java:769)
at com.thortech.xl.webclient.util.UIFacade.getImage(UIFacade.java:2299)
at com.thortech.xl.webclient.actions.CreateConnectorAction.imageScreen(CreateConnectorAction.java:1250)
at com.thortech.xl.webclient.actions.CreateConnectorAction.goNext(CreateConnectorAction.java:521)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:269)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(tcLookupDispatchAction.java:133)
at com.thortech.xl.webclient.actions.tcActionBase.execute(tcActionBase.java:894)
at com.thortech.xl.webclient.actions.tcAction.execute(tcAction.java:213)
at com.thortech.xl.webclient.actions.CreateConnectorAction.execute(CreateConnectorAction.java:135)
at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1914)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:463)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at com.thortech.xl.webclient.security.XSSFilter.doFilter(XSSFilter.java:103)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at com.thortech.xl.webclient.security.CSRFFilter.doFilter(CSRFFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.iam.platform.auth.web.PwdMgmtNavigationFilter.doFilter(PwdMgmtNavigationFilter.java:116)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.iam.platform.auth.web.OIMAuthContextFilter.doFilter(OIMAuthContextFilter.java:101)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Please help me out with this issue.
Thanks -
Configuration Issue in User Mapping ..
Hi,
Pls help resolve this issue..
When i go to <b>" UserMapping "</b> option using the <b>"Personalize "</b> link , i get the following error msg..
"There is a configuration issue which leads to problem when accessing user mapping data for the selected backend system"
Also , if i go thru "User Administration -> User Mapping "
then it says,
--"There is a configuration issue which leads to problem when accessing user mapping data for the selected backend system .
Usually reason is user mapping being configured for Strong encryption, but necessary additional files might be missing.Check Security log file for information "--
I am not able to solve this problem..Pls help
Thanks in advanceHi Venkat,
<b>Here the quick and dirty solution</b>:
In your portal go to 'System Administration' -> 'System Configuration' -> 'UM Configuration' -> 'Direct Editing'.
There locate the parameter 'ume.usermapping.unsecure', set it to 'TRUE' and restart your server.
I would rather recommend to install the unlimited strength jurisdiction policy files.
For more info on this, check this thread:
JCE Jurisdiction does not allow Portal to start
Hope this helps,
Robert -
Configuration issue of syslog.conf
Dear All,
My client is facing a configuration issue of syslog.conf.
They have set a cacti on a Linux server for monitoring of all servers snmp & syslog.
The part of snmp has set up successfully but cannot send the syslog to the cacti.
My client want the syslog can keep on the localhost and send to cacti for monitoring
we have tried to do the following things for make it work:
Insert the information (*.* @10.251.99.74) in /etc/syslog.conf
Restart service of system-log
Deleted all word of loghost in the /etc/hosts file
But still not work. Anyone can give me suggestion or idea about this?Thank you for your reply.
It is tab. But I think the problem is solaris cannot use *.* to represent all logs.
I have used the following is work
*.err;ker.debug;daemon.notice;mail.crit @10.251.99.74
If that is not the mail reason, please put me right. -
Anti-relay filter configuration issues
Configuration issues with the anti-relay filter in Messaging Server 4.1x.
The following information addresses common questions about configuration issues
with the anti-relay filter in Messaging Server 4.1x:<BR>
<P>
<OL>
<LI><B>Question:</B><BR>
What is the difference between the delivery
and submission
options?<BR>
<P>
<B>Answer:</B><BR>
The submission option
allows specified users to send email to any email address in the world.
These users are typically internal users.
<P>
The delivery option
allows specified users to receive email from anybody. These users
are also typically internal users.
<P>
A standard filter will appear something as follows:<BR>
<P>
# This is the anti-relay config file written by Jay at iPlanet
# The first section sets default conditions
resolvehostnames:0
useauthinfo:0
advertiseauthinfo:1
# This section sets domains to be delivered to by anybody
delivery:*@my.domain.com
# This section sets domains that can send any place
submission:129.12.4.*
<P>
<P>
<LI><B>Question:</B><BR>
The delivery
option works properly. However, why doesn't the
submission option
appear to be allowing emails from specified users to pass through?
<P>
<B>Answer:</B><BR>
The problem with the submission behavior could be due to the setting of the
the resolvehostnames
parameter. If this parameter is turned on
(resolvehostnames:1),
then <I>all</I> entries in this configuration file must be fully qualified
host names. Although wildcards will work, you cannot specify IP
addresses with this configuration setting.
<P>
<P>
<LI><B>Question:</B><BR>
Is it possible to allow people outside of my network to connect to the server
and send mail out?
<P>
<B>Answer:</B><BR>
Yes. To allow outside users to connect to the server and send mail
to any address, without granting the same privilege to the rest of the world,
activate the authenticated SMTP portion of the filter via the
useauthinfo option.
Setting this parameter to "1" (i.e., useauthinfo:1
) will require a user who is not in a
submission address and who is attempting to send email to an address not in
the delivery range to authenticate with a user ID and password.
</OL>
<P>
For additional information on the anti-relay filter, please refer to the
Messaging Server 4.1 Administrator's Guide at<BR>
<P>
http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/ubefiltr.htm#1073677Prashant:
Are you using a UBE filter to configure domain-based anti-relayinging? We had better luck with the anti-relay plug-in. There is some info on this (for 4.15) at
http://docs.sun.com/source/816-6044-10/ubefiltr.htm#1069973
You have to enable the plug-in using configutil, per the above. The anti-relay plug-in is controlled by antirelay.conf. Be aware that the pattern matching rules are very limited, and not well documented. Fortunately, the source code to the plug-in is included, and you can see what it is doing. To pass the tests we had to add a hard-coded test for a "%" in the source and recompile:
*** antirelay.c.orig Thu Oct 31 04:42:13 2002
--- antirelay.c Thu Oct 31 04:22:07 2002
*** 934,939 ****
--- 934,940 ----
* Weight must be non-zero to begin with so that matches on just "*"
* will work.
+ if( strchr(text,'%') != NULL ) return ABORT;
weight = TRUE;
for ( ; *p; text++, p++) {
if (*text == '\0' && p != '')
Not a really elegant hack, but we didn't need a fully functional regex engine. -
Oracle 11g Fusion Middleware (11.1.1.3.0) Report Configuration Issue
=============================================
Hi All,
I have installed Oracle 11g Fusion Middleware (11.1.1.3.0) on Oracle Linux 5 and getting some issues while configuring. What's happening is that when I run my report, it looks for the library attached to it. If I define the REPORTS_PATH in reports.sh, it works fine.
What I want to achieve is to push reports to use REPORTS_PATH environment variable from rwserver.conf instead of reports.sh
Someone told me to remove the REPORTS_PATH from reports.sh and add the REPORTS_PATH from reports.sh to a default.env in rwserver.conf, but it didn't worked.
What I know about the report server stuff in 11g Fusion Middleware is that it consists of two different servers (Standalone and In Process). Our application runs report using SRW.RUN_REPORT which basically use In Process report server setting in rwserver.conf to run the report.
The heirarchy in which reports try to look for the REPORTS_PATH is
1) REPORTS.sh
2) rwserver.conf
3) Settings as per Oracle Enterprise Manager Configuration Settings.
My standalone report server name is ReportsServer_hostname_asinst_F and the In Process Server name is rep_wls_reports_hostname_asinst_frd. When I define rep_wls_reports_hostname_asinst_frd (In process Report Server Name) for the server name parameter, I do not get any results for the report run using srw.run_report. Also I can't see the reason behind the report executed because of the following issue
http://hostname:8888/reports/rwservlet/showjobs?server=rep_wls_reports_hostname_asinst_frd
REP-51019: System user authentication is missing.
** the Singlesignon in rwservlet.properties is defined as no
But when I define ReportsServer_hostname_asinst_F (Standalone Report Server Name) as server parameter and ran the report using srw.run_report, I get result with the REPORTS_PATH defined in reports.sh not using rwserver.conf file.
http://hostname:8888/reports/rwservlet/showjobs?server=ReportsServer_hostname_asinst_F
(which shows the report just run).
Can someone who did Report Server configuration using ENV files (changing rwserver.conf), pls. send me the screenshots. Want to make sure if I am changing the correct files under correct location.
Pls. feel free to ask me questions related to the environment set up.
ThanksYour question belongs in {forum:id=84}
John -
Profit cebter and copany code configuration issue
i am making one sales order in which the item number level when i put profit center GB03100004 earlier i was getting company
code in profit segment as GB03, but now i am getting as GB01.
is this related to any configuration issue, please let me know.Hi,
Goto the T.Code KE53.
Enter the Controlling area.
Enter the profit centre.
Click on Company Codes.
Check for which company code the field "Assigned" is ticked.
Please check with your FICO consultant for more information and modifications.
Regards,
Krishna. -
EM Configuration issue.
I have installed grid agent on different server. When i ran emctl status agent i am getting below error.
EM Configuration issue. /u01/app/oracle/product/10g/hostname.com_ORCL.
OS is AIX
Thanks in advance...I am in AGENT_HOME.You are under Agent installation that's one thing. You also need to make sure your environment variable ORACLE_HOME point to AGENT_HOME not the database installation.
-
Hi,
I tried to put my database in Archivelog mode through EM , at the time of restarting the database it didnt start... instance is starting but database is not opening....
I tried this command but its giving error... ( I am running 10g r2 , on RHEL 5 which is install on Oracle virtual toolbox )
emctl start dbconsole
OC4J Configuration issue. /opt/oracle/oraclehome_112/db_1/oc4j/j2ee/OC4J_DBConsole_myhostname_orcl not found.
where orcl is the instance name.
and this directory, OC4J_DBConsole_myhostname_orcl, does not exist on the file system.
In some article I read ... the solution I tried to type...
http://kamranagayev.com/2011/03/21/step-by-step-installing-oracle11g-on-linux/
Feedback no. 19
./emca -deconfig dbcontrol db -repos drop
bash : ./emca : No Such file or Directory
./emca -config dbcontrol db -repos create
Thanks and regards...Hello;
I'm thinking this step was either missed of you have a typo :
Change the entry of .bash_profile file of the oracle user and add following lines:
vi /home/oracle/.bash_profile
export ORACLE_HOME=/u01/home/oracle/product/11.2.0/db_1
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib
export PATH=$ORACLE_HOME/bin:$PATHIf your ORACLE_HOME is set it should find the "emca".
You can test by running these export commands at the Linux prompt.
The which command is your friend
which emca
/u01/app/oracle/product/11.2.0.2/bin/emcaBest Regards
mseberg
Edited by: mseberg on Feb 29, 2012 2:52 PM -
Hi,
I am having a problem getting OAuth to work from Exchange 2013 to Lync 2013.
I have read and following the instructions online and cannot see what I am doing wrong.
On the Exchange 2013 server, I get the following error when I run:
Test-OAuthConnectivity -Service EWS -TargetUri
https://exchserver2.domainname.local/ews/ -Mailbox "Jack"
RunspaceId : 920118a3-6ab2-45dc-9b68-de68133de95e
Task : Checking EWS API Call Under Oauth
Detail : The configuration was last successfully loaded at 01/01/0001 00:00:00 UTC. This was 1059263714 minutes
ago.
The token cache is being cleared because "use cached token" was set to false.
Exchange Outbound Oauth Log:
Client request ID: 19ad80f6-7751-429f-aac5-e802105fbbc6
Information:[OAuthCredentials:Authenticate] entering
Information:[OAuthCredentials:Authenticate] challenge from
'https://exchserver2.domainname.local/ews/Exchange.asmx' received: Bearer
client_id="00000002-0000-0ff1-ce00-000000000000",
trusted_issuers="[email protected]",Negotiate,NTLM
Information:[OAuthCredentials:GetToken] client-id: '00000002-0000-0ff1-ce00-000000000000', realm: '',
trusted_issuer: '[email protected]'
Information:[OAuthCredentials:GetToken] start building a token for the user domain 'domainname.co.uk'
Information:[OAuthTokenBuilder:GetAppToken] start building the apptoken
Information:[OAuthTokenBuilder:GetAppToken] checking enabled auth servers
Error:[OAuthTokenBuilder:GetAppToken] unable to continue building token; no locally configured issuer
was in the trusted_issuer list, realm from challenge was also empty. trust_issuers was
[email protected]
Error:The trusted issuers contained the following entries
'[email protected]'. None of them are configured locally.
Exchange Response Details:
HTTP response message:
Exception:
System.Net.WebException: The request was aborted: The request was canceled. --->
Microsoft.Exchange.Security.OAuth.OAuthTokenRequestFailedException: The trusted issuers contained the
following entries '[email protected]'. None of them are
configured locally.
at Microsoft.Exchange.Security.OAuth.OAuthTokenBuilder.GetAppToken(String applicationId, String
destinationHost, String realmFromChallenge, IssuerMetadata[] trustedIssuersFromChallenge, String
userDomain)
at Microsoft.Exchange.Security.OAuth.OAuthTokenBuilder.GetAppWithUserToken(String applicationId,
String destinationHost, String realmFromChallenge, IssuerMetadata[] trustedIssuersFromChallenge, String
userDomain, ClaimProvider claimProvider)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.GetToken(WebRequest webRequest,
HttpAuthenticationChallenge challengeObject)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.Authenticate(String challengeString, WebRequest
webRequest, Boolean preAuthenticate)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.OAuthAuthenticationModule.Authenticate(String
challenge, WebRequest request, ICredentials credentials)
at System.Net.AuthenticationManager.Authenticate(String challenge, WebRequest request, ICredentials
credentials)
at System.Net.AuthenticationState.AttemptAuthenticate(HttpWebRequest httpWebRequest, ICredentials
authInfo)
at System.Net.HttpWebRequest.CheckResubmitForAuth()
at System.Net.HttpWebRequest.CheckResubmit(Exception& e, Boolean& disableUpload)
at System.Net.HttpWebRequest.DoSubmitRequestProcessing(Exception& exception)
at System.Net.HttpWebRequest.ProcessResponse()
at System.Net.HttpWebRequest.SetResponse(CoreResponseData coreResponseData)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.Monitoring.TestOAuthConnectivityHelper.SendExchangeOAuthRequest(ADUser user,
String orgDomain, Uri targetUri, String& diagnosticMessage, Boolean appOnly, Boolean useCachedToken,
Boolean reloadConfig)
ResultType : Error
Identity : Microsoft.Exchange.Security.OAuth.ValidationResultNodeId
IsValid : True
ObjectState : New
It appears to work fine from Lync 2013 to Exchange 2013.
When I run: Test-CsExStorageConnectivity -sipuri [email protected] -Binding Nettcp -Verbose in Lync 2013 I get a successful outcome:
VERBOSE: Successfully opened a connection to storage service at localhost using
binding: NetNamedPipe.
VERBOSE: Create message.
VERBOSE: Execute Exchange Storage Command.
VERBOSE: Processing web storage response for ExCreateItem Success.,
result=Success, activityId=0bbdc565-4a05-4b57-bf95-0c75488a1ef6, reason=.
VERBOSE: Activity tracing:
2015/01/02 19:15:55.616 Autodiscover, send GetUserSettings request,
[email protected], Autodiscover
Uri=https://exchserver2.domainname.local/autodiscover/autodiscover.svc, Web
Proxy=<NULL>
2015/01/02 19:15:55.616 Autodiscover.EWSMA trace,
type=AutodiscoverRequestHttpHeaders, message=<Trace
Tag="AutodiscoverRequestHttpHeaders" Tid="30" Time="2015-01-02 19:15:55Z">
POST /autodiscover/autodiscover.svc HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/15.00.0516.004
</Trace>
2015/01/02 19:15:55.624 Autodiscover.EWSMA trace, type=AutodiscoverRequest,
message=<Trace Tag="AutodiscoverRequest" Tid="30" Time="2015-01-02 19:15:55Z"
Version="15.00.0516.004">
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope
xmlns:a="http://schemas.microsoft.com/exchange/2010/Autodiscover"
xmlns:wsa="http://www.w3.org/2005/08/addressing"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header>
<a:RequestedServerVersion>Exchange2013</a:RequestedServerVersion>
<wsa:Action>http://schemas.microsoft.com/exchange/2010/Autodiscover/Autodiscove
r/GetUserSettings</wsa:Action>
<wsa:To>https://exchserver2.domainname.local/autodiscover/autodiscover.svc</
wsa:To>
</soap:Header>
<soap:Body>
<a:GetUserSettingsRequestMessage
xmlns:a="http://schemas.microsoft.com/exchange/2010/Autodiscover">
<a:Request>
<a:Users>
<a:User>
<a:Mailbox>[email protected]</a:Mailbox>
</a:User>
</a:Users>
<a:RequestedSettings>
<a:Setting>InternalEwsUrl</a:Setting>
<a:Setting>ExternalEwsUrl</a:Setting>
<a:Setting>ExternalEwsVersion</a:Setting>
</a:RequestedSettings>
</a:Request>
</a:GetUserSettingsRequestMessage>
</soap:Body>
</soap:Envelope>
</Trace>
2015/01/02 19:15:55.704 Autodiscover.EWSMA trace,
type=AutodiscoverResponseHttpHeaders, message=<Trace
Tag="AutodiscoverResponseHttpHeaders" Tid="30" Time="2015-01-02 19:15:55Z">
HTTP/1.1 200 OK
Transfer-Encoding: chunked
request-id: 5917d246-64b0-48e2-ad79-f9b6cffb5bea
X-CalculatedBETarget: exchserver2.domainname.local
X-DiagInfo: EXCHSERVER2
X-BEServer: EXCHSERVER2
Cache-Control: private
Content-Type: text/xml; charset=utf-8
Set-Cookie: ClientId=FTFXWUQWWRJVBMNBG; expires=Sat, 02-Jan-2016 19:15:55 GMT;
path=/;
HttpOnly,X-BackEndCookie=actas1(sid:S-1-5-21-3691024758-535552880-811174816-113
5|smtp:[email protected]|upn:[email protected])=u56Lnp2ejJqBx8jIn
sqbxpvSz8rHx9LLzp7O0sbOzcnSzcqcmZqem8aempmcgYHNz87K0s/N0s/Oq87Gxc7KxcrK;
expires=Sun, 01-Feb-2015 19:15:55 GMT; path=/autodiscover; secure; HttpOnly
Server: Microsoft-IIS/8.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
X-FEServer: EXCHSERVER2
Date: Fri, 02 Jan 2015 19:15:55 GMT
</Trace>
2015/01/02 19:15:55.704 Autodiscover.EWSMA trace, type=AutodiscoverResponse,
message=<Trace Tag="AutodiscoverResponse" Tid="30" Time="2015-01-02 19:15:55Z"
Version="15.00.0516.004">
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:a="http://www.w3.org/2005/08/addressing">
<s:Header>
<a:Action
s:mustUnderstand="1">http://schemas.microsoft.com/exchange/2010/Autodiscover/Au
todiscover/GetUserSettingsResponse</a:Action>
<h:ServerVersionInfo
xmlns:h="http://schemas.microsoft.com/exchange/2010/Autodiscover"
xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<h:MajorVersion>15</h:MajorVersion>
<h:MinorVersion>0</h:MinorVersion>
<h:MajorBuildNumber>1044</h:MajorBuildNumber>
<h:MinorBuildNumber>21</h:MinorBuildNumber>
<h:Version>Exchange2013_SP1</h:Version>
</h:ServerVersionInfo>
</s:Header>
<s:Body>
<GetUserSettingsResponseMessage
xmlns="http://schemas.microsoft.com/exchange/2010/Autodiscover">
<Response xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<ErrorCode>NoError</ErrorCode>
<ErrorMessage />
<UserResponses>
<UserResponse>
<ErrorCode>NoError</ErrorCode>
<ErrorMessage>No error.</ErrorMessage>
<RedirectTarget i:nil="true" />
<UserSettingErrors />
<UserSettings>
<UserSetting i:type="StringSetting">
<Name>InternalEwsUrl</Name>
<Value>https://exchserver2.domainname.local/EWS/Exchange.asmx</Value>
</UserSetting>
<UserSetting i:type="StringSetting">
<Name>ExternalEwsUrl</Name>
<Value>https://exchserver2.domainname.co.uk/EWS/Exchange.asmx</Value>
</UserSetting>
<UserSetting i:type="StringSetting">
<Name>ExternalEwsVersion</Name>
<Value>15.00.1044.000</Value>
</UserSetting>
</UserSettings>
</UserResponse>
</UserResponses>
</Response>
</GetUserSettingsResponseMessage>
</s:Body>
</s:Envelope>
</Trace>
2015/01/02 19:15:55.704 Autodiscover, received GetUserSettings response,
duration Ms=88, response=NoError
2015/01/02 19:15:55.706 Lookup user details,
sipUri=sip:[email protected], [email protected],
sid=S-1-5-21-3691024758-535552880-811174816-1135, [email protected],
tenantId=00000000-0000-0000-0000-000000000000
VERBOSE: Items choice type: CreateItemResponseMessage.
VERBOSE: Response message, class: Success, code: NoError.
VERBOSE: Item: Microsoft.Rtc.Internal.Storage.Exchange.Ews.MessageType, Id:
AAMkADAwNWZkZWI0LWM5NGYtNDUxNy05Nzk3LWZhZjRiY2Y4MTU4NwBGAAAAAADLP1MgTEXdQ7zQSlb
qPl++BwBauhRZTfLbTYZ+hBWtK784ANcdmUYqAACSqIurRqgYSZwMhT/IBw89AACnT6G9AAA=,
change key: CQAAABYAAACSqIurRqgYSZwMhT/IBw89AACnip6b, subject: , body: .
VERBOSE: Is command successful: True.
Test passed.
All my certificates on the Exchange 2013 and Lync 2013 servers are from my local CA.
I use APP with the public certificates as my reverse proxy for people connecting from outside the network.
In Lync, the OAuthTokenIssuer certificate created through the Lync deployment wizard is issued to domainname.local (my primary sip domain) and the Subject Alternative names include domainname.co.uk
I then exported this certificate to the Exchange Server and use the Set-AuthConfig to use this certificate for OAuth.
from what I read this was what I was supposed to do.
is this correct?
I have tried so many things I don't know what do to next.
Should the OAuth certificate in exchange be the one exported from Lync?
In Lync, should the OAuthTokenIssuer certificate include the servername or lyncserver.domainname.local or just be domainname.local like it is at the moment?
thank-you
jackThomas,
thanks for giving this the time. I have run the Configure-EnterpriseApplication.ps1 script following by remove-PartnerApplication so many times that I was wondering if there are other setting that
Configure-EnterpriseApplication.ps1 creates that aer not removed when you run
remove-PartnerApplication.
is there a way to completely remove everything that is confirmed when you run
Configure-EnterpriseApplication.ps1 so I can run Configure-EnterpriseApplication.ps1 without there being any configurations left from when I previously run that command?
thanks
jack
[PS] C:\Windows\system32>Get-PartnerApplication |fl
RunspaceId : cb2fb328-769d-4b32-8b7b-1fa35e2994f5
Enabled : True
ApplicationIdentifier : 00000004-0000-0ff1-ce00-000000000000
CertificateStrings : {MIIGcDCCBVigAwIBAgITPgAAARIHL+ig32UAAQAAAAABEjANBgkqhkiG9w0BAQUFADBcMRUwEwYKCZIm
iZPyLGQBGRYFbG9jYWwxHTAbBgoJkiaJk/IsZAEZFg1HdWlkZUNsb3RoaW5nMSQwIgYDVQQDExtHdWlkZ
UNsb3RoaW5nLUFQUFNFUlZFUjEtQ0EwHhcNMTUwMTEwMTIxODIzWhcNMTcwMTA5MTIxODIzWjB7MQswCQ
YDVQQGEwJHQjEPMA0GA1UECBMGTG9uZG9uMQ8wDQYDVQQHEwZMb25kb24xHzAdBgNVBAoTFkd1aWRlIEN
sb3RoaW5nIExpbWl0ZWQxCzAJBgNVBAsTAkhRMRwwGgYDVQQDExNHdWlkZUNsb3RoaW5nLmNvLnVrMIIB
IjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAyzDzaLsjJfktsbwIJ998ihsZM/0rKGdIt8rIx00oc
HA7w0uVyz2UqnP9a8uRi6HkA7djbynlmGG0hKSUUQngXxz7q2dY6q9rcY5Rw2mJOMeppounx44FFp4+4e
5HQKviLTYo+3DBGIR0mYDqxanKPS00d0f7HDLvmVb90hjdrbE372JBdcNNHs2OHRqg37bN2fAbwd22c9x
2kvi0rESFnr+KcIGECVInCTHLJ7fwVqvi4hvRqtz7KLZsMXprpgeVDs45EMMRtwJ5Hw8uZR4CFz4dHSlo
dIVgDPn8Ns2vGhcUK0JU4WkDbjnqo1SJzHlqtNjiu//wGcn77PAiM0yhyQIDAQABo4IDCjCCAwYwCwYDV
R0PBAQDAgWgMCEGCSsGAQQBgjcUAgQUHhIAVwBlAGIAUwBlAHIAdgBlAHIwEwYDVR0lBAwwCgYIKwYBBQ
UHAwEwHQYDVR0OBBYEFOY3whPicRAXNsTDSIg3FexpaCKdMHUGA1UdEQRuMGyCH0x5bmNTZXJ2ZXIyLkd
1aWRlQ2xvdGhpbmcuY28udWuCH0x5bmNTZXJ2ZXIyLkd1aWRlQ2xvdGhpbmcubG9jYWyCE0d1aWRlQ2xv
dGhpbmcuY28udWuCE0d1aWRlQ2xvdGhpbmcubG9jYWwwHwYDVR0jBBgwFoAUDHst3gUSMGwvkiNTPavmi
UEWgtQwggEuBgNVHR8EggElMIIBITCCAR2gggEZoIIBFYaBzWxkYXA6Ly8vQ049R3VpZGVDbG90aGluZy
1BUFBTRVJWRVIxLUNBLENOPURvbVNlcnZlcjIsQ049Q0RQLENOPVB1YmxpYyUyMEtleSUyMFNlcnZpY2V
zLENOPVNlcnZpY2VzLENOPUNvbmZpZ3VyYXRpb24sREM9R3VpZGVDbG90aGluZyxEQz1sb2NhbD9jZXJ0
aWZpY2F0ZVJldm9jYXRpb25MaXN0P2Jhc2U/b2JqZWN0Q2xhc3M9Y1JMRGlzdHJpYnV0aW9uUG9pbnSGQ
2h0dHA6Ly9jcmwuZ3VpZGVjbG90aGluZy5sb2NhbC9jcmxkL0d1aWRlQ2xvdGhpbmctQVBQU0VSVkVSMS
1DQS5jcmwwgdUGCCsGAQUFBwEBBIHIMIHFMIHCBggrBgEFBQcwAoaBtWxkYXA6Ly8vQ049R3VpZGVDbG9
0aGluZy1BUFBTRVJWRVIxLUNBLENOPUFJQSxDTj1QdWJsaWMlMjBLZXklMjBTZXJ2aWNlcyxDTj1TZXJ2
aWNlcyxDTj1Db25maWd1cmF0aW9uLERDPUd1aWRlQ2xvdGhpbmcsREM9bG9jYWw/Y0FDZXJ0aWZpY2F0Z
T9iYXNlP29iamVjdENsYXNzPWNlcnRpZmljYXRpb25BdXRob3JpdHkwDQYJKoZIhvcNAQEFBQADggEBAD
87GUPi02czEMO2Op0CeKBBpGwsfjYR9+RlC2uKAoH8PbWAxYNP3Ke6BtPeFy+95GGAJd5Z0+6LpO/AagA
+zeY/tocZQjy0pYaU4/TPZgD+ZB/8sU982msu+8waO316ipBcf/87n9ZW3Jjk5DcVbtwrZErrGRe9DEn8
QArN0jroLfaRtbDumse1Lp76+dxFuVhlLWcUXtIKaxm+UU9DS94EwJMtN54lDm3EG6hVdiGUR7TYqZU0K
HGm7HciIhuO+2rhAazOBiIAAW6wZRUpFKZONSVD6bKrQCzL12LvynQ7XC6Itgr4JGzNCmoN43dXwVCkWo
amTDdZY4h+QBqUvvY=}
AuthMetadataUrl : https://lyncserver2.domainname.local/metadata/json/1
Realm : domainname.local
UseAuthServer : False
AcceptSecurityIdentifierInformation : True
LinkedAccount : domainname.local/Users/LyncEnterprise-ApplicationAccount
IssuerIdentifier :
AppOnlyPermissions :
ActAsPermissions :
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
Name : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
DistinguishedName : CN=LyncEnterprise-786f61476b634278a3c9b9e4ec08b660,CN=Partner
Applications,CN=Auth Configuration,CN=domainname,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domainname,DC=local
Identity : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
Guid : 07495125-ccd4-4443-82d9-74fc3b955cdf
ObjectCategory : domainname.local/Configuration/Schema/ms-Exch-Auth-Partner-Application
ObjectClass : {top, msExchAuthPartnerApplication}
WhenChanged : 10/01/2015 17:14:55
WhenCreated : 10/01/2015 17:14:55
WhenChangedUTC : 10/01/2015 17:14:55
WhenCreatedUTC : 10/01/2015 17:14:55
OrganizationId :
Id : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
OriginatingServer : DomServer2.domainname.local
IsValid : True
ObjectState : Unchanged -
Essbase 11.1.2.1 Configuration Issue
Hi ,
I am using windows xp 32 bit processor and installed Essbase 11.1.2.1 successfully.
Configured with one Oracle 11g data base user/Schema working fine and also tried to configure with Two Users/Schemas
in another system workig fine.I heard that if we configure only with one schema Essbase components and Shared
services will conflict.so I would like to know with how many users we have to configure only Hyperion Essbase to get
Better Performance.
Regards
Sekhar.Hi John,
Then shall i proceed with one user/schema ?
If i proceed with two users/schema is there any problem will come or not ?
Is there any order to configure with one schema ?
like all Foundation components first after Essbase components.
Number of schema/users consideration is not an issue to me but i need best configured
Essbase Server without facing configuration issues in Future.
I had doubt on it may expect clarification ?
Regards
Sekhar -
OC4J Configuration issue Oracle 11g R2 Windows XP and Windows 7
Hallo!I have installed Oracle Database 11.2.0.1.0 on both Windows XP and Windows 7 on 2 different machines.
Before installing on both OSs,I had installed Microsoft Loopback Adapter and had set hostname as JOEY-PC and IP address 192.168.0.X.Once the installations were complete and I restarted the machines,I could not start OEM and the error below appears
C:\Documents and Settings\JOEY>emctl start dbconsole
OC4J Configuration issue. C:\app\JOEY\product\11.2.0\dbhome_1/oc4j/j2ee/OC4J_DBConsole_JOEY-PC_orcl not found.
When I went to the C:\app\JOEY\product\11.2.0\dbhome_1\oc4j\j2ee directory,I found the folder OC4J_DBConsole_localhost_orcl instead of OC4J_DBConsole_JOEY-PC_orcl.
I assumed that by using Microsoft Loopback Adapter,I would avoid the error above and that the OC4J_DBConsole folder would permanently remain as OC4J_DBConsole_JOEY-PC_orcl instead of OC4J_DBConsole_localhost_orcl.
Why is this folder changing its name and how can I resolve this issue?
Thanks.Pl post the contents of the file C:\WINDOWS\System32\drivers\etc\hosts on both servers
What steps did you take to set the hostname to JOEY-PC ?
Srini
Maybe you are looking for
-
I have a page that shows files. They include video, music, and documents. When one is clicked on, it goes to a certain page that is just for that type of file. The only problem I have is getting the source. I was thinking about using a session, b
-
While installing sql server 2012 with failover clustering I got the following error: The cluster resource 'SQL Server' could not be brought online. Error: There was a failure to call cluster code from a provider. Exception message: Generic failure. S
-
Cannot remote debug from JDev 10.1.3 on AS 10.1.2 running hotspot
Hi, I've set up an embedded OC4J instance in an application server as described in the help topic, "Remote Debugging in OC4J" (with a few changes, such as the fact that I added startup options using the OC4J instance Admin page of EM, rather than at
-
Sorting albums by artist then year
I have a bunch of albums imported into my itunes but I have problems sorting them the way I want it. I want it to be sorted first by artist then by year so I have all the albums from 1 artist together in the order they was released Now itunes sort by
-
iPlanet 6.0 server on Solaris. I've created several virtual server classes within my server. Each Virtual SErver class has its own doc root and relys on http-header addressing to serve the correct pages. Up till now, this has worked very well for us.