CUP: Delete user certain time after request has been created

Hi,
Is it possible to define in CUP a delete account workflow that once the request has been created user deletion waits some time (i.e 1 month) before user is finally deleted? We would need a workflow without any approver.
Delete User request creation >> 1 month >> User is deleted
Thanks in advance. Best regards,
Imanol

Hi,
Automatically deleting user IDs after a specific # of days is not possible in CUP. However, while creating the stage, you can define the wait time and then trigger the escalation. You can make the escalation to the Security Manager who can immediately take up the proper action, i.e., deleting the ID or making it inactive.
Infact, this is the reason why it is recommended to have an alternative approver.
Hope this addresses your question.
Regards,
Raghu

Similar Messages

How to notify a self registered user that his/her request has been denied

Hello,
Is there a way to send an email to the requestor (this email address is what the user puts in the self registration form under requestor email) to notify that the request has been denied? (OIM 9.1)
In The User Registration Process Definition, Task Awaiting Approval Data, I have the Assignment Tab set as follows:
Rule: Default
Target Type: Group
Adapter AssignApproverGroup (this adapter dynamically looks for the members in a group based on the requestor organization, assigns the task to these individuals, and sends an email notifying that self registration approval is pending to all members of that approvergroup)
Priority: 1
Notification Tab
Assignee is checked
Status: R
Email: Self registration request Denial
When the Assignee logs in and denies the request, an email is sent to the Assignee about the denial.
Questions:
1. If the ApproverGroup has more than 1 member, how can we notify all the members of the Approver group that the request has been denied?
2. How can we notify the requestor that his/her request has been denied using his/her provided email from the self registration form?
Thanks
Edited by: Khanh on Dec 4, 2008 3:36 PM

You need to think about how the whole system is going to work - you need to know everything that the button will require, and then think about how to provide this information to the button.
So, by the sounds of you need say a single button to press when you want to add a new button to the calculator. Associated with this have text fields that take the function for the calculator. I would specify that the function uses variables e.g. x and y as in function = x * y. Then your program could parse the input string describing the function, by recognising "*" to mean * in the Java code syntax and "/" to mean /. Then treat everything else as variables. Since you can filter out the other variables i.e. not the operators, you can then say associate an array to contain the values of these. Then when the user uses the button and specifies the input parameters and presses the button, you can update this array, and perform the calculation based upon these values.
Hope this helps.
My advice really is just to think about everything that a button that creates new function buttons is going to need.
PS. Remember to repaint the GUI once update its Container. Swing does this automatically, but I always specify it explicitly anyway to be safe. You can use either repaint(), validate(), or revalidate().
Goodluck mate!

Cannot save form error after form has been created

I've created a form and fucntions well.
It has been saved as a interactive pdf.
When people with just the acrobat reader open the file and click anywhere on the form a window pops up stating that
" you cannot save form..." then the OK button appears
You are able to enter data into the fields and print, but can only save the form as a blank copy.
Any help would be much appreciated.

You need to reader enable the form in Adobe Acrobat. Click on Advanced >
Enable Usage Rights in Adobe Reader and Click Save Now. You can then save a
reader enabled version of the form and users will be able to save their data
in the form.

Cannot delete in a file after it has been open 20 minutes

After I have a file open for about 20 minutes Delete stops working. When I hit the key, illustrator appears to lock up for abou 30 seconds, but the feature doesn't delete. I have to keep closing and reopening the file. The file is only about 3.5MB in size. Any ideas on how to improve this?

Yes, I was thinking of PS and AE at the time of writing this. However, AI has an option for setting this as well. If you open up the AIPrefs file in your user home directory (e.g. on Vista 64bit C:\Users\Mylenium\AppData\Roaming\Adobe\Adobe Illustrator CS4 Settings\en_US), there is a pair of lines reading
/maxUndoDepth 200
/undoDepth 5
By editing the maxUndoDepth value, it may be possible to get a more memory friendly behavior on some systems.
Mylenium

How can I safely delete a questionable email after it has been downloaded?

Norton tells me it will scan for virus if I use outlook or outlook express, but in certain cases not for thunderbird. what are the exceptions? What should our proper procedure be?

I think you're looking for '''right-click, delete''' as a way of deleting a message without opening it.
However, in most cases, the dangers of viewing suspect email messages are usually overstated. Unless you follow links, or download and unzip or open attachments, they are unlikely to do you any harm, particularly in Thunderbird where scripts are not permitted to run.
To be ultra cautious, you could view messages off line, or disable live content by viewing in plain text only.

Thunderbird email deletes the message automatically after it has been opened and the program is closed.

After I open a message, it disappears when I close Thunderbird. Any suggestions that I have read do not work.

http://kb.mozillazine.org/Disappearing_mail

Table does not Exist in Unix OS after it has been created In HTML_DB

I created a table in HTML_DB and can see the table fine in my HTML_DB application. However, when I go to the Unix OS and try to look up the database using SQL*Plus, I am getting an error saying the table does not exist. Any help as to why this is happening would be appreciated.
Kelly

When I go to the Unix OS, I then try and search for the table in the exact schema that I used in >HTML_DB.I don't see what the Unix OS has to do with it here...do you mean you're connecting via SQLPlus?
If you're connecting via SQLPlus, which schema are you connecting to? (i.e. are you certain you're connecting to the same schema that the table was created under when you were connected to Application Express).

Billing Plan: order changes possible after FAZ has been created?

Hi together,
I've got a question regarding the billing plan functionality. Is it possible to change the order in case the FAZ is already created? Everytime when I try this the system increases the down payment value and a new FAZ will be created. Even when I enter a free of charge material the system creates a new FAZ with value 0... That#s strange, isnt'it?
Thanks for your help, Christian

Hi Stefen,
We can do this ...but you can not look those fields .but you can through error messgaes . this you can do from user eixts or using BADI's. write code in such manner once if document delivey after that if user want to change any data just through error messages for him.
Thanks,
saleem

How to add a virtual disk into a 'guest VM' after VM has been created?

Well, it was easy when one need to add a virtual disk before creating a guest VM. All need to do was to edit the template and click on disk tab and create a virtual disk.
However the challenge comes after created a 'guest VM'. I need to add additional virtual disk into this 'guest VM'.
This is what I did.
Click on Repositories tab --> Under repositories--> Virtual Disks. There is a green "+" sign. Click on it. It says create virtual disk. Follow the instruction, I enter the virtual disk name, size, and select if it is spare or non-spare. Hit ok. Well, everythings seems fine.
Next, I click on the "blue folder" icon which indicated import virtual disk. It asked me about Virtual disk download location.
According to the manual, http://docs.oracle.com/cd/E27300_01/E27309/html/vmusg-repo.html#vmusg-repo-vdisk
Virtual Disk download location: The URL for the virtual disk file. The URL protocols supported are HTTP, HTTPS, and FTP. For example:http://example.com/vdisks/myvdisk.img
How can I determine what is the URL in my case?
Where is the newly created virtual disk located? Isn't it supposed to be in Oracle Server? But it doesn't have a http server running there.
Please help.
Thank you.

Virtual disks can only be added and removed at runtime from a PVM. You don't even need to know anything special. Just create the vdisk and use the VMs settings to occupy another slot with the new vdisk.
But as I said… this works only with PVMs, not HVMs. In case of a HVM, you will need to shut down the VM and add the disk afterwards, then fire it back up.
The little folder with the blue down arrow is for importing an existing vdisk file from a web- or ftp server. If you have already created the vdisk, you won't need that.

How to delete or rename an object that has been created in IR.

Dear friends
I have transfered a software component from SLD.
But if I want to rename this so that I can re-import it from SLD or delet this transfered SWC object, how can i do it.
I see a 'delete' option under the menu item Object, but it is grayed out and cannot be used.
Any suggestions or feedback will be greatly appreciated.
Thanks

Gregor,
You can delete it by double clicking on the software component. And in the right frame choose Software Component Version - Delete.
raj.

Loading photo to slide show after movie has been created

Hi Everyone,
I created a slide show on iMovie and thought I was done so I created a movie through the Media Share feature (to eventually burn on iDVD). Then, I realized there was one photo I hadn't yet included; so I went back and tried to insert that photo but it won't let me. Does iMovie know that you've already "finalized" a project and not let you make any changes to it after that? Is there any way around this without having to do the entire show over again?
Thanks,
Jen

Hey Dazlari,
I'm so sorry but I actually can't remember what I did! I haven't used iMovie for over a year. I'm not that tech savvy though so it couldn't have been that hard to do :-)
Keep experimenting...I hope you figure it out!
Best wishes,
Jen

Changing template after page has been created

Hey,
Does anyone if this can be done?
I created three pages as Welcome, Casting and Contact Us and I want to merge those pages under a different template so is it possible without having to totally re-create the website?
Later,
Chris

Sorry, you can't change templates under a page that is already created.
My advice would be to add three new pages -- Welcome, Casting and Contact Us -- using the new templates you want, then copy and paste your text from the original three pages before deleting them.
Of course, you still may need to change the typeface to match the typeface on the new template. But who knows, maybe the old typeface on the new template may look fine. Depends on which templates you are using.
If you don't have much copy on your site, it may be simpler just to start over.

How do I insert additional text into a form after it has been created? - Acrobat Pro XI

I am trying to add additional text and fields into the middle of a form I have previously created. I can copy and paste the information in there but it does not shift the lines below it down. Is there any easy way to accomplish this without having to recreate the entire form?
I appreciate any help I can get.
~Shannon

If you need to make such changes to the layout of the form, you should go back to the source document, edit it, and generate a new PDF. You can then replace the pages of the old document with the new pages. Any fields that you've already added will be retained and can be move to their new positions and you can add any new ones you need.

Adobe X Standard cannot load/create EuroRoman.ttf font after file has been created using AutoCAD LT 2015. File was loaded and refereneced with Distiller X. Font has been installed to Win7

Need suggestion on how to get Adobe X to create/load the font. Others in the office can create the same Adobe file with no issues. Help please.

You have the required Xorg drivers and those errors appear to be expected (https://www.virtualbox.org/ticket/4789). As a matter of fact, Xorg is terminating successfully. Just to make sure, is your ~/.xinitrc setup correctly?

Create Letter after applicant has been created WS00400019

Hello,
Firstly i would like to find out if it is possible for this subworkflow to be processed in the foreground, because when it is executed it gives me an error stating that "Error when defining successor for node 0000000004. I've checked the binding and there are no errors found.
Secondly is the business object application with the event created, correct for this workflow.

[Check SAP HELP Document 1|http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92897146f311d189470000e829fbbd/frameset.htm]
[SAP Help Document2|http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92895746f311d189470000e829fbbd/frameset.htm]

CUP: Delete user certain time after request has been created

Similar Messages

Maybe you are looking for