CUP-PSS-TAB ON THE PORTAL
Hi Everyone ,
We want all the SAP users to reset their own passwords via portal so created thsi view for the portal
but it still ask to re authenticate , so found this note 1252589
[https://service.sap.com/sap/support/notes/1252589]
Applied the note ,but still unable to resolve the issue , did anyone achieve PSS for CUP via portal for end users , it still points out to the requestor page ( really annoying)
Best Regards
Hi,
The tabs are displayed in alphabetical order within plan category. So, to change the order you will have to give the plan id (the 4 digit plan id) a different name.
For example:
If your Adjustments tab is coded ADJT (or something similar) and your Merit tab is coded MERT, ADJT will come before MERT.
To change the order, change "ADJT" to "ZADJ".
Tony
Similar Messages
-
What is the Web Dynpro tab on the portal page?
Newbie here...
I am confused between NDWS and the Web Dynpro tab on the portal page. As I don't have access to either right now, I need to know what is required by a Portal Content Admin to maintain an application. The Basis people do the JCO setup. Those are the only tabs I have seen when using the Web Dynpro tab from the portal, not NDWS. Seeing as I don't have access to either tool, and I have to ask for what I need and I don't know what I need... Been there?
I guess my question is the use of the two tools.
Thanks,
Amy Smith
Haworth, Inc.Thanks so much for a quick response!
So, the Web Dynpro Content Admin is normally a part of the content admin role. Hmm... I get a "you are not authorized" when I click that tab, even though I can do iViews, etc. and was told I have the content admin role. So if no one edited the rights of the content admin, I should be able to get into Web Dynpro Content Admin tool. Is this so? Is there any special user config, check box, etc in addition to the role?
Is the Dynpro content admin tool useful for content admins or content developers?
My Basis person does not want the content admin to be able to change JCO settings. Is there a way to give the content admin rights to everything in the WDCA except that?
Thanks again. I am a J2EE developer who volunteered to take content admin and content development roles and am trying to figure out what has been done here and what needs to be done. On top of that anyone who has been involved claims "I know nothing..." until I ask specific questions. It's just hard to know what the specific questions are.
I know, training... No money. Sigh... I am good at doing tutorials and reading manuals and experimenting, however, I need access to the right tools and permissions first.
Thanks again.
--Amy Smith Haworth, Inc. -
How modify the tabs of the portal
Good day
We have installed sp17,
We need to modify the design of tabs of the portal, I know That it is
in the themes, I can modify the tabs with images, but the only that does not allow me to place to an image is in the superior part of the tab.
how can I do To place a line of another color in the top edge of the tab.
Thanks,
CantvHi,
See this thread for ways of modifying the TLN: Customizing Top Level Navigation in Enterprise Portal
Hope this helps.
Daniel -
BOBJ 4.1 SP2 Launchpad does not show 'Home' tab in the portal running in IE10
We have installed BOBJ 4.1 SP2 and running SAP portal on IE (Internet Explorer) 10.
When we open the launchpad in the portal, it does not open the "Home" tab and instead just shows the menu bar in the 'Documents Tab'.
This works perfectly fine in IE 9.
But when I open the Launch Pad separately in IE 10, I see the Home tab with no issues.
Has Anyone seen this behavior and if so what is the resolution.
Attached are the images.
Thank you
Suman
Below is the image when Launchpad is opened by itself and Home tab can be seenHi Suman,
See kba 1940894 below, this is a known issue with EP and IE10
https://support.wdf.sap.corp/sap/support/notes/1940894
~Valdrin -
Anyone know how to control the order (left to right) of the tabs for the various roles assigned to a user? It seems that every time we add or delete a role, the order of the tabs rearranges in an unpredictable way.
Regards,
subbuSubbu,
Please check the Sort Priority property for the each role.
You can set any number between 0-100.
Least numbered role will appear first.
Ram -
How to hide a tab/book in portal
Hello, I am building a website which requires a valid username and password to get in. Depending on the type of the user (client or admin) the users can view certain tabs or books in the portal (the admin will be able to view all available books). Is there anyway to hide a book/tab from the portal? I am using Weblogic 8.1 SP 3
Thank you
TLYou can use taglibs and EL to control the output flow in JSP. A standard taglib is JSTL. For conditional statements you can use JSTL's <c:choose> or <c:if> tags. Syntax is nothing more than obvious, here's some pseudocode:<c:if test="${display tab123}">
<div id="tab123"></div>
</c:if> -
E-Recruitment/E-Recruiting in the Portal
Hi Experts,
We are implementing SAP E-Recruitment and the SAP Portal. After following the IMG config steps, I am curious how the webdynpro pages appear in the portal. I can test the pages from SICF, but how do I complete the portal integration and get the pages to open from a tab within the portal?
Also, are any BSP pages still supported within E-recruiting? Or are all the pages webdynpro?
Thanks
ShaneDear Shane,
SAP e-Recruitment business package is split into two ui packages. One is on Web Dynpro ABAP and the other BSP technology. As a functionality all the candidate related pages like, internal/external/registered candidate related activities are developed in WD ABAP. All the recruiter, manager and administrator(upload questionaire etc) are handled in BSP technology.
As a background check(based on information), the busienss package was completly in BSP and later candidate related pages were moved to WD ABAP.
So finally, the business package is collaboration of BSP and WD ABAP UI technologies and BSP is very much part of it.
Thank you.
Regards,
Sharath M G -
Create tabs in Enterprise Portal 6.0
Hi,
I began using SAP a couple days ago and I want to integrate an application into the portal. Before I do that, I am trying to learn some basics. I've created a sample iView, deployed it to the portal and it worked as expected. Now I want to import some data into the portal and verify that I can create new tabs to navigate to my iView.
I've logged into the EP as administrator and created a new folder under Portal Content->Content Provided by Other Vendors. I added a workset, page, and my iView to the folder and then exported it. I manually moved the exported file into my Import directory and imported the .epa file.
After doing this, I do not the tabs I thought should appear in the portal. It appears the UI has not changed after the import. I thought the workset and page would add the appropriate tabs in the portal but not so.
Do you know of a simple tutorial that illustrates how to add navigation tabs to the portal? I'm sure I am doing some basic things wrong, but I haven't found the right information to guide me yet.
Thank you very muchThanks for your responses. Unfortunately, I am still unable to see any navigation tabs added to the portal. I followed advice from this post as well, SAP Integration and Certification Center (SAP ICC)
but still had no luck. I must be missing some steps.
Is it necessary to export a .epa file and then import it in order to see the tabs? -- that is what I've tried.
I have created an iView and I would like to create a transport package that one could import into a portal. Once the package has been imported into the user's portal, he should navigate the tabs at the top of the portal to get to the iView (similar to the tabs: Content Administration -> Portal Content)
Can someone please provide a procedure to add navigation tabs to my portal. Please don't omit any cruicial steps because I am obviously missing something simple here.
Many thanks! -
Where is the 'other' tab in Developer Portal?
Where is the 'other' tab in Certificates, Identifiers & Profiles?
It was there before Apple revamped the portal and yes i'm enrolled with the enterprise account.
I need it to generate MDM vendor certificate. I've emailed Apple and no response for the past 3 days. So frustrating.
Anybody having this problem?<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Maria Torres ([email protected]):
IN 3.0.8, IT LOOKS TO ME THAT DELETING THE USER FROM THE LOGIN SERVER AUTOMATICALLY DELETES THE USER FROM THE PORTAL.
<HR></BLOCKQUOTE>
I check this in Portal308, deleting user from login server is not equal to delete from portal. In PORTAL30.WWSEC_PERSON$ table still remain personal details of deleted user.
Is it bug or right functionality?
For me it is some kind of bug. When you re-create user in sso server it tooks over all pers. data from old user.
Thanks for any answers
Marcin
null -
Portal cookie timeout issue in Tabs within the Browser IE
Hi Experts,
We have Portal and Backend configured as SSO.
Once I logged with Quality Portal ,a ticket is generated, and when I open another tab to login to production portal my quality portal ticket is inconsistent and I get the login screen on applications.
If I open in a new browser window the issue is not there.
Hope the cookie generated has the uniqueness for the system but why it is not controlled within TABS of the brower (internet explorer 7).
Let me know how to override this.
regards,
SethuHi,
JAVAWS nothing to do with the issue reported.
Olivier,
In question to your suggestion, as per note 701205, I'm going to test this parameter 'ume.logon.security.relax_domain.level' to cut which should carry the uniqueness of the system.
Let me know you tried that parameter and any suggestions on this.
Regards,
Sethu -
Hi all,
Does anyone happen to know where to retrieve statistics for the CUP Password Selfservice usage? As it is not reported on in the CUP informer tab.
Perhaps a db table that holds the provisioned PSS requests?
Thx in advance.
GeorgeThere seems to be some environment change causing this problem. I would suggest working with support to investigate the environment issue.
-
How to set different navigation items for each content tab in xMII portal
Hi,
Scenario : I have added three content tabs in the xMII portal.
I want to change the items in the navigation tree when each of the content tabs are selected.
How is this possible?
Please help.Vaishali,
The built-in navigation tree is not intended for this sort of thing, where just like with the tabs it is intended to provide role/user based content links.
You would be better off having your content tab link pass a criteria to the default target frame and allow a web page to give you the second level of dynamics. Your content tab links could be something quite simple like "Page.irpt?Tree=1", "Page.irpt?Tree=2", "Page.irpt?Tree=3" and your irpt page would receive the Tree property and you could react accordingly in your web page.
Regards,
Jeremy -
WEBI Java Error when starting report form the portal
Hi when i'm starting a BO WEBI report out from the portal the next error is apearing:
error on set doc title.
Details: Version:12.1.0.882
Toepassingsserver:
http://pcl09009.magma-it.local:8080/AnalyticalReporting/Webi/cdzServlet
Stapeltracering: netscape.javascript.JSException: Unspecified error invoking method or accessing property "updateDocumentTitle" at sun.plugin2.main.client.MessagePassingJSObject.newJSException(Unknown Source) at sun.plugin2.main.client.MessagePassingJSObject.waitForReply(Unknown Source) at sun.plugin2.main.client.MessagePassingJSObject.call(Unknown Source) at com.businessobjects.wp.tc.TCDocument.setNameEx(Unknown Source) at com.businessobjects.wp.om.OMDocument.setXmlProperty(Unknown Source) at com.businessobjects.wp.om.OMDocPropHandler.setDocProperty(Unknown Source) at com.businessobjects.wp.xml.XMLDocPropParser.parseDocProp(Unknown Source) at com.businessobjects.wp.xml.XMLDocPropParser.parseDocProps(Unknown Source) at com.businessobjects.wp.xml.XMLOutputParser.parseOutput(Unknown Source) at com.businessobjects.wp.xml.XMLOutputParser.parseOutputs(Unknown Source) at com.businessobjects.wp.xml.XMLOutputParser.parse(Unknown Source) at com.businessobjects.wp.xml.XMLLoader.loadDoc(Unknown Source) at com.businessobjects.wp.tc.TCMain.loadDocument(Unknown Source) at com.businessobjects.wp.tc.TCMain.initDocument(Unknown Source) at com.businessobjects.wp.tc.TCMain.initClient2(Unknown Source) at com.businessobjects.wp.tc.TCMain.initClient(Unknown Source) at com.businessobjects.wp.tc.thread.InitAppletRunner.run(Unknown Source) at java.lang.Thread.run(Unknown Source)
afte closing i can't refresh or change the querie
Does any one have solution for this? I'm using BO XI 3.1Hi Peter,
try this solution oryginally posted by Craig Brandt in another topic.
Firstly make sure you have no old Java installs or 'add ons' lingering about on your system, check in programs and features (assuming your using windows 7) and uninstall Java completely. Check the add ons in IE and show: 'All add ons' - remove manually if required. Do a clean up of the computers temp files and cache. I used a program called ccleaner. Also check c:\users\<username>\app data\locallow\ and delete the 'Sun' folder. Then reboot machine.
- Install latest Java 1.7.0_51
- Go to Java control panel in windows control panel
- add the exception for your BOBJ server e.g. http://<SERVER>:8080
- click continue
- go to the advanced tab
- scroll down and tick 'use TLS 1.2'
- apply or OK to exit java control panel
- open 'Internet Options'
- go to the 'advanced' tab
- scroll down and tick 'use TLS 1.2'
- OK everything and close any IE windows
Now try again, you will need to enable the 'add on' when prompted on opening IE for the first time.
Also when accessing the BI Web I for the first time, I placed a tick in the 'do not show this again for apps from this publisher'
Work for me! -
Error when loggin on to the portal
Hello all,
I am new to the portal and I need your help to figure out a proble I have. When I log on to the portal I get the following error message on some of the tabs (not all):
No user mapping defined for system SAP_WebDynpro_XSS
When I get this message I am prompted to enter user ID and password.
Does anybody know what I am missing or how to solve this problem?
Thank you,
EnriqueWell,
You have a system with alias SAP_WebDynpro_XSS which is used to show you were webdynpro applications for ESS/MSS are.
This system is setup with authentication user mapping, but most probably the SAP_WebDynpro_XSS is running on the same portal, and it should have been SAP logon Ticket.
So either
1) Go and setup a usermapping for alias SAP_WebDynpro_XSS, should probably be your portal username/password, or the username/password of the system hosting the webdynpros (do this under useradministration user mapping)
2) Change Logon method the system with alias
SAP_WebDynpro_XSS from user mapping to SAP logon ticket
Dagfinn -
Authentication in an application placed in an URL iview in the portal
Hi all gurus!
I have a delicate problem: we have an application that we have deployed on the same WAS as the portal runs on and that application is presented through an URL iview in the portal.
We want to use the LogonTicket created by the portal for authentication in the application and a colleague of mine put a "*" (asterisk) for requested roles in the web xml file. The problem is that the users had to be administrators in the portal in order for it to work and that is not very suitable. If you removed the admin role from the users the authentication stopped to work.
Does anyone have a step by step guide on which files to configure and how to do it properly? I have googled the problem and also searched the forum but I haven't found any solutions. My colleague followed this description and that didn't help:
[http://e-docs.bea.com/wls/docs70/webapp/security.html]
I forgot to mention: it's 7.1 portal we are using.
All the best!
BennyHi Sridhar.
Thanks for the links. I followed them but I can see that SAP either are general in their instructions or, if specific, talking about Visual Admin, in any case they couldn't give a complete assistance.
Never the less I have managed to come a bit further by creating a UME role from within Identity Management in the portal and adding the application of interest to the role under the tab "Assigned Actions".
So now I'm also logged into the application when I logg on to the portal, I can see that in the portal logs. But, when I'm going to take the last step which invokes the call of a service I get a new error.
Here are two entries from the "Default trace" and beneath are two entries from the "SAP Log". I comment further in a separate answer since I otherwise exceed the maximum character length...
com.sap.security.core.server.jaas.
Default Trace
Message: Authentication failed. For details see log entry 0016D4475ED5021D0000000100000A84 in security log.
[EXCEPTION]
javax.xml.ws.soap.SOAPFaultException: Authentication failed. For details see log entry 0016D4475ED5021D0000000100000A84 in security log.
at com.sap.engine.services.webservices.espbase.client.bindings.impl.JAXWSUtil.processFault(JAXWSUtil.java:407)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call_SOAP(SOAPTransportBinding.java:1164)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.callWOLogging(SOAPTransportBinding.java:818)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call(SOAPTransportBinding.java:759)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.WSInvocationHandler.processTransportBindingCall(WSInvocationHandler.java:167)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.WSInvocationHandler.invokeSEISyncMethod(WSInvocationHandler.java:120)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.WSInvocationHandler.invokeSEIMethod(WSInvocationHandler.java:83)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.WSInvocationHandler.invoke(WSInvocationHandler.java:64)
at $Proxy1882.purchaseRequestCreate(Unknown Source)
at com.q2d.jpetstore.model.PurchaseRequestFacade.createPurchaseRequest(PurchaseRequestFacade.java:43)
at com.ibatis.jpetstore.presentation.OrderBean.newOrder(OrderBean.java:157)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.struts.beanaction.ActionInvoker.invoke(ActionInvoker.java:16)
at org.apache.struts.beanaction.DefaultActionInterceptor.intercept(DefaultActionInterceptor.java:5)
at org.apache.struts.beanaction.BeanAction.execute(BeanAction.java:246)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:419)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:224)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:471)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:291)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:240)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:462)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:250)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:115)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:96)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
Date: 2009-07-06
Time: 17:17:58:616
Category: com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding
Location: com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding
Application: com.sap/wstore2EAR
Message: process()
[EXCEPTION]
com.sap.engine.interfaces.webservices.runtime.ProtocolException: Authentication failed. For details see log entry 0016D4475ED5021D0000000100000A84 in security log.
at com.sap.engine.services.wssec.srt.protocols.ProviderSecurityProtocol.logThrowable(ProviderSecurityProtocol.java:1074)
at com.sap.engine.services.wssec.srt.protocols.ProviderSecurityProtocol.afterDeserialization(ProviderSecurityProtocol.java:710)
at com.sap.engine.services.webservices.espbase.server.runtime.ProtocolProcessor.protocolsAfterDeserialization(ProtocolProcessor.java:156)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.preProcess(RuntimeProcessingEnvironment.java:421)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process(RuntimeProcessingEnvironment.java:246)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPostWOLogging(ServletDispatcherImpl.java:176)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPostWithLogging(ServletDispatcherImpl.java:112)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:70)
at SoapServlet.doPost(SoapServlet.java:51)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:471)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:291)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:240)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:462)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:250)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:115)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:96)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
Caused by: com.sap.engine.services.wssec.policy.exception.VerifyException: [_policy1000] Authentication failed. For details see log entry 0016D4475ED5021D0000000100000A84 in security log.
at com.sap.engine.services.wssec.srt.protocols.ProviderSecurityProtocol.authenticate(ProviderSecurityProtocol.java:250)
at com.sap.engine.services.wssec.srt.protocols.ProviderSecurityProtocol.afterDeserialization(ProviderSecurityProtocol.java:682)
... 45 more
Date: 2009-07-06
Time: 17:17:58:613
Category: com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment
Location: com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment
Application: sap.com/WebShopEAR
Maybe you are looking for
-
When I turn on my ipod it just shows me a picture of itunes logo and a usb plugin. I plug it in to the computer and nothing happens. Ive tried to reset it and it still wont do anything. I don't know what to do. Please help
-
Adapter engine field blank in RFC Comm channel (Sender)
Hi Friends, I am not getting any value in drop-down list of adapter engine in RFC adapter sender communication channel.System is allowing me to save the comm channel , system is giving me following error No adapter engine specified I m getting values
-
How do I see which albums a specific photo in Moments/Collections have been added to?
How do I see which albums a specific photo in Moments/Collections have been added to?
-
Oracle Universal Installer in Linux error
I did as follows: Double check that you are logged in as oracle and not root, and that the environment variables have been set by the login script you prepared earlier. Then change to your home directory and start the Oracle Universal Installer with
-
CS4 .indd file association problem
Hi folks, I'm running a PC with XP and recently upgraded my software from CS3 to CS4. My computer has stopped associating .indd files with InDesign. I've tried to set the file association manually using the Open With command though InDesign doesn't a