CUP-SPM, when user request FFid

Hi,
GRC CUP-SPM,Approver cannot see ffid when requestor request ffid.Approver has to select the ffid then approve/reject the request. In request type config - SUPER_USER_ACCESS is active with action SUPER_USER_ACCESS and intitiator with priority and request type(superuser access).Is there any change i need so approver can see the request ffid access.
Thanks
Shahed
Edited by: mouhed shahed on Aug 18, 2010 4:33 PM

Hello Shahed -
The FF IDs will be displayed to the approver in the 'Superuser Access' tab of the request approval page. Are you sure that the approver is checking there instead of the 'Roles or Profiles' tab that is used for most other CUP requests?
- Rob Robeson

Similar Messages

How sharepoint understand when user requests for web applications by their DNS names

HI
I configured Alternate access mapping in my sharepoint farm for default ,intranet zones
and spt farm has two web front end servers and they load balancing by F5 device
in WFE servers there are different web applications are running on different ports
so here I want to know how load balancing works, load balancing configured in F5 device.
when users request a webapplication from browser (ex http://cms) where this request will go
1)when I ping cms and other web applicaations it returns me a loadbalancer server IP for all web applications;
ping cms : it returns 10.xxx.0.80 , same ip returns when I ping for other web app
but ex CMS web application run on the 10.xxx.1.26:81 port in sharepoint server
2) and these sharepoint web applications running on different ports in sharepoint web servers , so here how sharepoint understand when user requests for web applications by their DNS names
http://cms and http://products etc
adil

I'm not sure if the F5 can add a port number (I'm not an expert on load balancers). But in general if you design the SharePoint site to run on port 81 then you need to have port 81 appended to the request or it won't work. http://cms in your
example would take you to http://cms:80 not http://cms:81. But in general DNS will resolve the address back to the F5 load balancer. The load balancer will look at the header of the HTTP request (which contains the original address you requested)
and forward the request to the appropriate web front end IP address. If your web front end is using one IP address for multiple sites then those sites need to be differntiated by using a custom port like 81 (which must be included in the original request)
or because a host header was bound to the web application when it was created. If they are running on different port numbers then the request must include the port number by the time it gets to the SharePoint server.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Is there a way to force firefox to send ajax-request when user clicks on a link and redirect occurs?

I'm trying to send ajax-request with web-analytics data when user clicks on a link. But Firefox cancels the request and moves to the link location. Sync requests or waiting for response is not an option because performance is critical.

Correct me if I'm wrong here:
<code>jQuery.data()</code> saves the <code>{"foo": "bar"}</code> JSON object to variable <code>data</code>, and then the <code>s.tl()</code> call sends <code>data</code> to the server, right?
You could use jQuery's [http://api.jquery.com/event.preventDefault/ <code>event.preventDefault()</code>] method to stop the browser from automatically following the link on click. You could wait until the Ajax request was finished before following the link.
<hr>
I hope that solved your problem!
<i>If it did, would you please choose this answer as your solution? It would help other Firefox users to find help on the forums faster and more efficiently. Thanks!</i>
And of course, feel free to post back if you need more help!
Happy browsing!

Error occuring when submitting Active Users request in R12 on Solaris 5.10

Hi,
For a cloned environment, while submitting the active Users request it is completing with error. Below is the log file. Please help
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
There was an error trying to initialize the HPI library.
Please check your installation, HotSpot does not work correctly
when installed in the JDK 1.2 Solaris Production Release, or
with any JDK 1.1.x release.
Error occurred during initialization of VM
Signal chaining not allowed for VM interrupt signal, try -XX:+UseAltSigs.
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 720610.
Review your concurrent request log and/or report output file for more detailed information.
Thanks,
Anand

Hi Anand;
Please check below metalink note:
There Was An Error Trying To Initialize The Hpi Library When Running Any Concurrent Reports [ID 836237.1]
Regard
Helios

Create user in SAP GRC AC 5.3 for each module (RAR, CUP, SPM, ERM).

Hello,
I have a doubt.
The users of the modules of the SAP GRC AC 5.3 have to created in the UME of the EP Core, is that right?? And thet add the roles of each user for each module (RAR, CUP, SPM, ERM), is that right?
Best Regards.
Pablo Mortera.

Hi Pablo,
To access GRC AC 5.3 you can create one UME user and assign different roles related to four GRC component.
Or you can create different GRC user and assign respective components roles.
The example of GRC Admin role are.
AEADMIN
READMIN
VIRSA_CC_ADMINISTRATOR
regards,
Sudip,

Hi! i have a question. When I start macbook, the guest user request me password, how the off? (Sorry for my english, i speak spanish, la pregunta en españo: al encender el macbook, el usuario invitado me solicita contraseña, como la quito?)

Hi! i have a question. When I start macbook, the guest user request me password, how the off? (Sorry for my english, i speak spanish, la pregunta en españo: al encender el macbook, el usuario invitado me solicita contraseña, como la quito?)

El usuario invitado sirve para habilitar acceso anonimo a ciertas partes del sistema.
Si no se usa, deshabilitalo. Entra a Preferencias del Sistema / Usuarios y Grupos con una cuenta con privilegios de administrador. Haz click en el candado de la esquina inferior, pedira el password de la cuenta. Selecciona al usuario invitado y asegurate que todas las opciones esten des-seleccionadas (sin paloma).

CUP 5.3 - Single Sign On fu00FCr end user request screen?

Hi everyone,
Is there any way to achieve Single Sign On in a windows environment using the corporate Active Directory for the END USER REQUEST SCREEN in CUP 5.3?
I am aware of the document "Single Sign-On with SAP BusinessObjects Access Control 5.3" by the SAP GRC RIG (Harleen Kaur) so I know how to achieve Single Sign On for the CUP application itself.
I am also aware of the option to deactivate "end user verification required" in the authentication source definition in CUP.
What our end users are asking for is true single sign on. They would like to enter a request WITHOUT providing network user ID and/or password manually.
Thanks!

Hi Raghu,
Thanks a lot!
We have not yet configured SSO but are in the phase of analyzing our options.
I understood that SSO is only possible for the server:port//AE/index_apr.jsp page in CUP.
What about the end user request screen (server:port/AE)? Will this work with Windows-SSO using SPNEGO? Would I set the authentication source to LDAP or to UME (UME has multiple LDAP as user data source)?
Many thanks and best regards
Patrick

GRC CUP-SPM Config

Hi,
When requestor request for SUPERUser Access.Approver cannot see FFID in a request.Approver has to select FFID before approve / reject in CUP.I checked in enduser personalization tab,super access has mandatory and editable are greyed out and visible is set to YES.Is it that the reason and i cannot change editable option coz of greyed out. I checked workflow and request type in configuration are correctly set. Any solution for it.
Regards
Mushu.

Hi,
I am not sure if I understood correctly but there is not much configuration needed here. To see the requested FF ID, approver has to go to the super user access tab. There is no other way. If this was not related to your question then please rephrase.
Alpesh

Report Job was cancelled upon user request???

Hi,
My reports take more than 10 minutes to complete, most times I get
"Report Job was cancelled upon user request".
error, how to fix this problem? Is there any time limit inside the report I can set.
Thanks

hi ,
There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
Hope this helps
Manoj

PPP LCP Send Termination Request [User request] - ...

Had this problem now for a very long time, and recently came back in touch with it after I was forced to use my HH5 as my TPLINK ADSL router got bricked.
The problem only persists when using any BT issues router whether it be a HH3-5.
The event log is filled with firewall packet loss and blocked entries which I understand that is the firewall doing it's job which is fine. The line that keeps popping up is the one in the title of this thread (PPP LCP Send Termination Request [User request]) this pops up every time the connection drops.

this was raised before https://community.bt.com/t5/BT-Infinity-Speed-Connection/PPP-LCP-Send-Termination-Request-User-reque...
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Oracle Reports Server CGI - Report Job was cancelled upon user request.

I am running reports on the web through Forms using Run_Report_Object built in. I am using Oracle 9iAS Enterprise Edition Release 1(1.2.2.2.2), Forms 6i Patch 9 (6.0.8.18.3) and Reports 6i Patch 9 (6.0.8.18) using CGI implementation. Most reports are running fine, but I have one that produces 125 pages and we are getting the following messages in the browser:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job was cancelled upon user request.
However if you look at the Reports Server Queue Status thru the browser it shows that the report did finish, but it took 16 minutes. But the user gets the above message in their browser window.
Is there a way to get the first page of the report to display, while the rest of the report finishes, so the browser window doesn't timeout and display the above error?
Any help would be greatly appreciated.

hi ,
There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
Hope this helps
Manoj

Can we control user request w.r.t Memory and CPU utilization in Oracle 10g

Dear All,
We are having Production with Oracle 10.2.0.4 (5 Node RAC, 32Gb RAM each) running on RHEL5.2 with 12000 Users. We have some schema say FIN, HRMS, SALES, REPORT and many dedicated users for those schemas. We need to control the user request against these schema with respect to Memory (or CPU utilization)
Suppose users using FIN schema can use Maximum 40 % of Total Memory, HRMS schema can use Max 20%, SALES can use Max 20% and REPORT can use Max 20%.
Is it possible to create any Service in Server side to handle this type of scenareo or any existing service which can be customised to fullfil this?
Please suggest me.......
Thanks,
Tusar
Edited by: gohappy on Jan 27, 2011 5:59 AM
Edited by: gohappy on Jan 27, 2011 6:00 AM

JDBC 'applications' quite often don't use persistent connections, and often do not exit gracefully by calling 'exit' or 'disconnect'.
This means the session will continue to exist.
It also means, if you don't establish any form of connection pooling and/or dead connection detection, you can throw whatever amount of memory in the server, and you will continue to report
'Now problems is coming'. Apart from crippled English, the general lesson any DBA should know is how these 'applications' operate, and, contrary to some, you can never ever fight problems caused by applications,
by throwing memory and cpu at the problem.
When I read your text, I also assume the application is not using PrepareStatement calls and not using bindvariables, this is why your 'application' is burning the CPU.
Find those 'application developers', sue them, or better still : Beat them with a whip, and have them fix their 'crapplication'.
Paraphrasing William Jefferson Clinton: It's the application, stupid!
Sybrand Bakker
Senior Oracle DBA

How to prevent error message for material description in MDG material detail screen, when user click on check action

Dear Experts,
I have a requirement for making material description as non mandetory in change request view of mdg material screen.
I have done that using field usage in get data method of feeder classes, but still message is displaying.
This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
How to prevent error message for material description in MDG material detail screen, when user click on check action.
Thanks
Sukumar

Hello Sukumar
In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
Regards, Ingo Bruß

Error: One or more categories of approval could not be loaded when user wants to approve

Two of my PM's are getting the error shown in the title of this post (Error: One or more categories of approval could not be loaded when user wants to approve).    The "Related Topic" issues a work around of using the rules to "automatically approve the
offending items".   This did not work for us.   Has anyone else experienced this issue?
Thanks,
~RK

Hi Marc - Per ytour request:
The PM does the following:
1. Access PWA Home page and review messages
2. Clicks on “You have 1 timesheet from resources pending your approval” message
3. Approval Center Page loaded with “Error: One or more categories of approval could not be loaded” and “There are no new approvals to review at this time. If you have published your plan and
still do not see approvals, have your resources submit updates from “Tasks” of “Timesheet”” messages.
We've made certain the Schedule is published and the timesheet was submitted correctly.
Expected behavior: Timesheet records should be available for review and approval.   Instead, the PM gets the screen below with the error message

Problem in creating user request through ContentDB API

Hi
I am trying to create user request on the document. Workflow is configured on the document parent folder. I am trying to submit the document for workflow.
Here is the code i used to create user request
RequestManager reqM = session.getRequestManager();
long[] itemId = { item.getId() };
NamedValueSet[] docParameters = new NamedValueSet[]
new NamedValueSet(
new NamedValue[]
new NamedValue(Attributes.WORKFLOW_PARAMETER_NAME,"JUSTIFICATION"),
new NamedValue(Attributes.WORKFLOW_PARAMETER_DEFAULT_VALUE,
"Edited para 2"),
new NamedValueSet(
new NamedValue[]
new NamedValue(Attributes.WORKFLOW_PARAMETER_NAME,"IFS_ECM_VERBOSE_LOGGING"),
new NamedValue(Attributes.WORKFLOW_PARAMETER_DEFAULT_VALUE,
Boolean.FALSE),
NamedValue[] options2 = new NamedValue[] {
ClientUtils.newNamedValue(Attributes.WORKFLOW_CONFIGURATION_PARAMETERS,docParameters)};
reqM.createUserRequest(itemId, options2);
I got the following error:
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: ORACLE.FDK.UnexpectedError:ORACLE.FDK.ServerError
faultActor:
faultNode:
faultDetail:
     {http://xmlns.oracle.com/content/ws}fault:<detailedErrorCode xsi:type="xsd:string">ORACLE.FDK.ServerError</detailedErrorCode><errorCode xsi:type="xsd:string">ORACLE.FDK.UnexpectedError</errorCode><exceptionEntries xsi:nil="true" xsi:type="ns1:ArrayOfFdkExceptionEntry"/><info xsi:nil="true" xsi:type="ns1:ArrayOfNamedValue"/><serverStackTraceId xsi:type="xsd:string">112-1191017621836</serverStackTraceId>
     {http://xml.apache.org/axis/}hostname:contentdb.sjrwmd.com
ORACLE.FDK.UnexpectedError:ORACLE.FDK.ServerError
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
     at java.lang.Class.newInstance0(Class.java:350)
     at java.lang.Class.newInstance(Class.java:303)
However, If i create user request without passing any parameters it is working fine. I get error only when creating request with parameters.
Please help.

Hi
I could able to get the request invoked. Earlier I tried with wrong parameters.
Thanks

CUP-SPM, when user request FFid

Similar Messages

Maybe you are looking for