CUPC 8.6.1 and Call Pickup

Hi,
Has anybody tried using Call Pickup from a phone whilst their phone is Desktop Integrated into CUPC 8.6.1202.76?
We have noticed that if Phone-A calls Phone-B and Phone-C uses Call Pickup from their Desk phone (796X SCCP in my case) to intercept the call then the Phone-C user's CUPC client reports a missed call from Phone-A. This doesn’t seem right to me. Surely it should be Phone-B that gets the missed call?
There are no share lines between the three phones. CUPS is 8.6.3 and CCM 7.1(5).
It only occurs when the CUPC client is enabled for "Use my 796X for audio".
If CUPC is in Softphone mode you (obviously) don’t get any notifications.
Many thanks
Chris

Hi,
In CUPC server health it is showing error in Video Desk phone - as CDP uable to detect IP Phone.
However my phone is directly connected to laptop.
how to resolve this issue?
Regards,
Andy

Similar Messages

What's the meaning of Forward No Coverage at Call Forward and Call Pickup Settings

hi All,
Please, I have a CUCM and I need to understand the meaning of the follow configuratio at the line:
Forward No Coverage Internal
Forward No Coverage External
Forward on CTI Failure
Could you explain to me by a easy way?????
How can I do a test?
Thanks a lot

Actually the no coverage is not only for DNs in line groups. The way no coverage works is that you set a CF setting on any phone (doesn't need to be in a line group), and you send them to a hunt pilot. ie CFB to a hunt pilot
In the hunt pilot for the Forward Hunt No Answer/Forward Hunt Busy you choose:
Use Personal Preferences—Use this check box to enable the Call Forward No Coverage (CFNC) settings for the original called number that forwarded the call to this hunt pilot.
So, after it rings your phone, rings thru all the hunt pilot/hunt list/line group members, it goes back to the phone that routed the call to that hunt pilot, looks at the no coverage setting and does as instructed. Send it to VM, another hunt pilot, your mobile, etc.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Adding an extension to a Call Pickup Group

I am new to call manager 7.0 and just wanted to know if adding an extension to a Call Pickup group was as easy as just going to the directory number configuration page of the extension and selecting a call pickup group within the "Call Forward and Call Pickup Settings?" Would there be anything else I would need to do?

nope, that's it
Assigning a Call Pickup Group to Directory Numbers
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmfeat/fscpickg.html#wp1056555
HTH
java
if this helps, please rate

Configuring Call Pickup and Busy Lamp Field - SIMPLE QUESTION UNANSWERED

In configuring BLF do I need to declare a station name ? The name should be only one at the entire network or could double if the ext/ usr is different ?
c. Enter the following string in the Extended Function field:
fnc=blf+cp;sub=Stephanie@$PROXY;ext=300@$PROXY
Using the following syntax:
fnc=type;sub=stationname@$PROXY;ext=extension#@$PROXY
where:
- fnc: function
- blf: busy lamp field
- cp: call pickup
- sub: station name
- ext or usr: extension or user (the usr and ext keywords are
interchangeable)
Thanks in advance !
Regards

Hi Jerry,
The second button option is the only way I can see this working because the BLF feature is only meant to monitor Busy/Idle Directed call park slots and does not have the access prefix assigned. For example;
User A has a directed call park slot 88 assigned to him/her as a button on the BLF.So when they use this feature they are really speed dialling 88.
When someone wants to retrieve this call that was parked by User A they must dial the directed call park prefix that you set up (example 21) plus 88 (2188).
When User A tries to retrieve the call by pressing the same button they originally used they are really dialling 88 again and thus get the"call park slot unavailable" message.
You would need to setup a second button with the 2188 prefix+park slot for this to work properly.
Here is an excerpt from the documentation;
"User cannot retrieve parked calls. After dialing the directed call park number to retrieve a parked call, the user receives a busy tone, and the IP phone displays the message, Park Slot Unavailable.
Ensure that the user dials the retrieval prefix followed by the directed call park number."
Hope this helps!
Rob
Please remember to rate helpful posts....

"Temp Fail" with BLF Speed Dial + Call Pickup

Good day All,
I am running CUCM version 8.6.2 and many IP Phones 7962G.
I have a Manager configured with extension 1001 and his PA with extension 1002. Both extensions are configured in the same Call Pickup Group.
On the PA IP Phone, the second button is configured as a BLF Speed Dial with Call Pickup for the Manager.
When someone calls the Manager, she can see that the Manager Line is ringing but when she press the button in order to pick up that calls, she hear a busy tone and the IP Phone display a message that says "Temp Fail". I have checked every thing on both IP Phones and all seems to be correct. Am I missing something may be?
When I changed the Manager Line from 1001 to 1003, in the same Call Pickup Group, thats works fine. She is able to pick up calls for 1003. But on the CUCM Server, there is no such difference between extension 1001 and 1003.
Please advise.
Warm regards,
J. Kabundi.

Which PickUp group they belong doesn't matter, don't need to be the same for the BLF PickUp Feature.
But if they are in the same group as you mentioned: Can the pickup via the normal PickUp Softkey?
If changing only the Number makes it working i think you may have a problem with the DNs/Partitions. Ever renamed the partition? Try deleting the manager DN, remove the unassigned number from your server, and add it again.
If it still doesn't work... i would restart the whole server if possible.
Regards,
Sven

How to pickup multiple calls via Call Pickup

We are currently on CUCM 8.6 and have a location where there is a Call Pickup group. When a single call comes in, they are able to pickup the call without issue from any phone in the Pickup Group. They have instances where they may have more than one call come in at the same time and want to pick it up. How can they pick which call to pickup? Is it even possible?

When more than one associated group exists, the priority of answering calls for the associated group goes from the first associated group to the last associated group. For example, groups A, B, and C associate with group X, and the priority of answering calls goes to group A, B, and then C. First, group X picks up incoming call in group A, though a call may have come in earlier in group C than the incoming call in group A.
Note Usually, within the same group, the longest alerting call (longest ringing time) gets picked up first if multiple incoming calls occur in that group. For other group call pickup, priority takes precedence over the ringing time if multiple associated pickup groups are configured.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fsgd-861-cm/fscpickg.html

Call Pickup Configuration fnc=blf+sd+cp

Hello there,
We recently setup a new business and have setup four Cisco SPA525G2 IP phones. We are using a hosted PBX service and SIP accounts for our VOIP service.
I have aproblem getting call pickup to work. In the Line Key extended function i have the following string:
fnc=blf+sd+cp;sub=1640000@$PROXY;ext=164000@$PROXY;nme=Bob
the blf and speed dial functions work well but the call pickup does not work. when i press the line key to pickup and incoming call on another extension i get this message "Invalid call: Bob **1640000"
Can someone please throw somw light on this issue?
Thanks in advance

I have upgraded firmware to 7.5.4
String i am using now is:
fnc=sd+blf+cp;sub=1640000@$proxy;usr=1640000@$Proxy
Still no luck, when i press the line key to pickup the call i get:
Line 1 Forbidden to:*08
*08 being the Att Console call pickup code (on both phones)

Lync 2013 I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second Anybody out there having similar problems with call pickup Groups?

HI
I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second
Anybody out there having similar problems with call pickup Groups?

Hi,
Did you meet any other call delay when you using Lync?
As the issue happen for Lync desktop client, it can be performance issue. Please check if there is any error message from FE Server when the issue happen.
Also please check if you have updated Lync Server to the latest version, if not, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Call Pickup within a Hunt Group CallManager 5.1

I have a customer where we have several hunt groups configured. We also have Pickup Groups configured for each of these areas so that anyone within that group of users can pickup a call ringing on another phone. If someone dials a number directly that is within the pickup group, the call can be picked up from another phone in that group. However, if someone dials the hunt group number, other people within the pickup group cannot pickup the call and have to wait until the hunt works its way around to them. The DNs in the Pickup Group are the same as the DNs in the Hunt Group.
What I want to know is "should this work?". I think I understand why it isn't working, as the dialled number is not a number within the pickup group, as it's a hunt pilot, but is there any way of getting this to work?
Any help would be appreciated.
regards
Mark.

Hi Mark,
You are hitting this bug CSCsb12946 which prevents this feature from working. For various CCM versions there was this workaround but supposedly not for CCM 5.1 (see Fixed-In versions);
Set enterprise parameter (System->Enterprise Parameters->Cisco Support Use 1) Cisco Support Use 1 to CSCsb42763 (case sensitive)
This operation added listbox (Route Plan->Route/Hunt->Hunt Pilot->hunt pilot XXXX -> Call Pickup Group) Call Pickup Group.
From this doc;
http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K11612191
1.- Enter
CSCsb42763 (in mixed case) in the Enterprise Parameter 'Cisco Support
Use 1' under the new group 'Cisco Support use Only' and click update. Only the value
CSCsb42763 in this parameter can enable the configuration. Change the
value to anything else to disable this functionality.
2. Go to Hunt Pilot Configuration page and select a call pickup group from the Call
Pickup Group dropdown list and click update.
CSCsb42763
Call Pickup fails on Hunt List
Issue:
Call pickup fails for hunt list when call is CFA from Route Point in 4.1(2)ES41. This is not the designed functionality for this issue and will break the Call Pickup logic.
Workaround:
Use multiple shared lines & CFNA between each shared line.
Related Bugs
Call Pickup fails when ringing line list member
Symptom: Selecting PickUp or GPickUp does not pickup the call from any of the members of a line group. Condition: CM 4.x Workaround: None. Feature not supported. Further Problem Description: Defect CSCsa66224 may appear to have allowed this feature to work in earlier versions.
Call Pickup from line group member fails after es installed
Symptom: A call is CFNA to a hunt pilot/line group. The call can no longer be picked up. Conditions: Calls CFNA to a hunt pilot. 4.1(2)ES36. Workaround: None
1st Found-In
4.1(3)
4.1(2)
Fixed-In
4.2(0.35)
4.2(0.841)
4.2(1.15)
4.1(3)SR2
4.1(3)ES30
4.1(3)ES29
4.1(3)ES20
4.1(2)ES43.1
5.0(2.1000.3)
5.0(2.50.17)
5.0(1.99.33)
5.0(1.50.224)
5.0(1.20.84)
5.0(0.319)
4.2(1.2)
4.2(0.750)
4.2(0.24)
I did se this one Post from John regarding CCM 5.1.X,
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dddea7c/10#selected_message
Hope this helps!
Rob

Cisco UCM Call Pickup

We recently migrated our old phone system to Cisco IP Telephony and just getting used to UCM. Don't know if this is the correct place to ask, but here is my question to ask. I have two users that are in a call pickup group. (Secretary and Director) The secretary wants to be able to pickup the Directors line if she's not available, but the Director does not want to receive any calls from the Secretary. The director has no means of answering the main line for any reason and kind of have a conflict with doing this thru call pickup. How can I accomplish this? Any suggestions are greatly appreciated. Thanks.

The easiest way to give the secretary the ability to answer the director's calls is to add the director's DN to the secretary's phone. This will allow incoming calls to the director's phone to ring at the secretary's phone simultaneously. Secretary can answer the director's calls and see if the director is on the phone or not.
I hope I understood your question correctly.
"The secretary wants to be able to pickup the Directors line if she's not available, but the Director does not want to receive any calls from the Secretary."
HTH,
If this helps, please rate.

Call Pickup - Users experience One Way Audio when using Call Pickup Orbit to pickup internal calls with internal Lync 2010 Callers

Hi
Noticed an issue where when using Call Park Function with users you receive one way audio when answering the call
The scenario is
1) If a user is internal and is homed on Lync 2010 Pool and calls an internal user who is homed on a Lync 2013 Pool and another internal user homed on a Lync 2013 Pool picks up the call with Call Pick Up orbit, Lync 2010 users only hears one way audio and
same for user who has picked up call
2) If the scenario is an External PSTN call or another Lync 2013 user these calls are fine
In Lync Tracing logs a SIP/2.0 481 Call Leg/Transaction Does Not Exist error is returned
Is this a known bug or expected behavior - Call Pickup is basically useless until all users are migrated to Lync 2013 as there is no way of a user knowing whether call is internal or external and if the user is on Lync 2010 or 2013, obviously in my
large organization 2000 users no an overnight thing
Coupled with the fact no Team Call Group\ Simultaneous Ring can be in place for Call Pickup to work im thinking Call Pick Up is not going to happen for awhile
Is there any fixes\ developments that may help this issue or is there a setting I am missing

Hi,
Please install latest update for Lync Server 2010 and 2013.
http://technet.microsoft.com/en-us/lync/dn146015.aspx
If the issue persists, please enable logging tool on Front end and Mediation server to get trace for troubleshooting.
http://blog.schertz.name/2011/06/using-the-lync-logging-tool/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

CME Call Pickup Sample

I need to create a new call pickup group and need assistance.
Does anyone have a sample config for setting up a call pickup group?
Thanks

Yes we have 15 devices and we are ruinning 6.1 software and we can only get 9 devices to register at any one time!
I've also tried to get the Multicasting part working using an ephone-dn, with the feed ip cmd as follows;
ephone-dn 310
name paging zone 1
feed ip 239.1.1.100 port 8560
This does not work, I have multicast working on the network so far with paging-dn's and MOH working fine!
Lee
PS. Please let us know how your TAC case works out!!

Iphone 5s bad réception 3g and 4g signal and call

Hi, my iphone 5s very bad network reception in my home and my calls is very bad quality same outdoor.
Ios 7.0.2.
Sim card ok
All settings by defaut.

Hello there Kevkev5s,
It sounds like your call quality and reception are low both inside, and outside. I want to recommend a couple of articles to help troubleshoot the cellular connection quality. The first is named:
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Increase the volume during the call.
Make sure nothing is blocking the receiver. If you're using a protective case or display film, remove it and try again.
Make sure nothing is plugged into the headphone jack or the dock connector.
Check the receiver opening to see if it is clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush.
Try another location with better signal. If the audio issue happens only when on a call, it could be due to the location.
If the iPhone is paired with a Bluetooth headset or a car kit, try turning off Bluetooth on your device. Learn more about troubleshooting Bluetooth connections.
Restart the iPhone.
Make sure your device is up to date.
If the issue is not resolved after restoring the iPhone software, contact Apple Support.
If the issue is not resolved, or the above does not help I would next try the troubleshooting in this article named:
iPhone: Troubleshooting issues making or receiving calls
http://support.apple.com/kb/TS3406
Thank you for using Apple Support Communities.
All the best,
Sterling

I deleted a contact out of my iPhone 4S but when I go to send a message the contact appears although that individual is no longer in my address book. I deleted all text and call history pertaining to the deleted contact but still shows up.

I deleted a contact out of my iPhone 4S but when I go to send a message the contact appears although that individual is no longer in my address book. I deleted all text and call history pertaining to the deleted contact but still shows up. Does anyone have the same issue and how do I fix it?

dam122577 wrote:
but wont restoring as new delete all my info on my phone
Yes. That is why I added...
it will disappear over time due to non-use.

Cisco Jabber 10.5 call pickup feature - just for added contacts?

Hi everyone,
we are checking out the new Cisco Jabber for Windows client. The call pickup feature is the best new feature so far.
The only issue we are running into: as we are using global pickup groups devided by office we now see every call coming in for everyone.
I would suggest that it would be much better if you could choose, for which group of contacts you would like to enable the call pickup.
Is there a roadmap for this in the future of Jabber call pickup feature? Would be a very appreciated Addon.
Thanks & Cheers!

Roadmap questions cannot be discussed here, either post this question on a partner forum, or reach your AM for this.

CUPC 8.6.1 and Call Pickup

Similar Messages

Maybe you are looking for