CUPC 8.6 (and older) - Sound Notification for Chat to wrong source

This issue originally came up in CUPC 8.5(6), but as I logged in to report it, I saw 8.6(1) was just released - I have confirmed the same issue still exists in 8.6 as well.
A user asked me how to get sounds to notify her when someone sent her a Chat message in CUPC.  She has two sound devices - a normal set of speakers, and a Jabra USB-based headset for communications.  When a chat would come in, she could not hear anything on her speakers, even with the volume turned up, the sounds enabled in CUPC, etc.
After a bit of experimentation, it appears the sound for Chat notifications goes to the "Speakers" audio device, and not the "Ringtone" audio device.
To me, this seems counterintuitive, since an IM alert sound is the Chat equivilant to a Ringtone - it's a notification that you have an incoming communication.  The sound is not audible unless you have your headset on, assuming it is a different device from your speakers.
I'd like to request that in the next update for CUPC, the Audio Alerts for Chat be set to use the Ringtone audio output, and not the Speaker audio output.  (Or, if needed, an option to choose which one is used be made available.)
Thank you!
-Geoffrey

Hey Geoffrey,
I suggest that you open a TAC case so that we can verify this with our Dev Team. Once you open a case, I can work with you on this one.
Thanks,
Jasmeet

Similar Messages

  • My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what c

    My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what can i do!???? Thanks a lot for help me!!!!

    I have a nearly identical problem with my Ipad 3. Mine is the left channel. I've yet to find help, but have found a number of other posts on this and other forums discussing the issue. People have tried restore, reset etc. Also, cleaning the ports with compressed air or cotton swabs. It appears to be a software issue, but no one is sure.
    Along with the original poster, I'd appreciate any help.
    As far as the 'level 6' poster, if you're going to be rude, please don't bother. Hope it was just a bad day.

  • Why can't I get sound notification for my email anymore?

    I am no longer able to get sound notification for send or receive email nor can I get sound notification for incoming phone calls.  What happened and is there a correction?

    Before doing anything else, is your ringer switch in silent mode?  I'd try toggling the switch a few times to make sure it's working.  The phone should vibrate when you move the switch from on to silent.  If it doesn't then the switch may be broken.
    Next make sure the volume for notifications is not off.  Check the Sound settings for this.  Changing the volume there should also cause your (phone) ringtone to play.  If it doesn't then there is something very wrong.
    The only other thing I can suggest if the above doesn't help is doing a hard reset of the phone.  Hold power and home buttons down until screen goes dark and Apple icon appears, then let go.
    If that doesn't work, then the only other thing you can try is doing a Backup and then a Restore in iTunes.  If that doesn't work, then there's a hardware problem.

  • How can I set repeating sound notifications for voicemails received?

    Is there a way to set a sound notification for voicemail received?  Having to constantly pick up the phone to see if there is a VM message is
    annoying.  My old dumb phone had a repeating sound for VM messages received.
    Can this also be done for calendar entries, as a reminder?
    TIA,
    Chris

    Not sure what phone you have but you might check your Sound settings and see if there is a setting for that but if not you might Look in the Google Play Store for Apps that ring or Vibrate a notification for your Voice Mail..
    Actually I found this you might give it a look:  Click on the Link
    A Better VoiceMail Notifier - Android Apps on Google Play

  • Lost sound notification for incoming facetime

    I recently lost the incoming sound that notifies me of a FaceTime call. I have checked all settings and cannot find anything I have changed.

    Hey there Mackenzie4.5,
    It sounds like you are not getting the sound notification for your FaceTime calls that are coming in. I would check this setting in the Notifications section specifically to verify there is a sound setup to notify you:
    About Notifications on iPhone, iPad, and iPod touch
    Go to Settings > Notifications to verify that the app supports notifications. If notifications do not appear in the Notification Center, make sure that the Notification Center setting for the app is enabled. 
    Make sure you’re signed in to your Apple ID.
    If you’ve recently installed an app or restored a backup, open the app to start getting notifications.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • How to set sound notification for email

    I cant find the setting for adding sound notifications for my email. The only setting is for preferred email, I want all my emails .  I do have it for messages, but not email

    Go to email......manage accounts........select which email account.....notification sound......select which sound you want........Done deal.  Also make sure you have email notifications in the status bar checked.  Have a nice day.

  • Sound notification for SMS

    How can I set a sound notification for SMS? Thanks!

    For SMS, you are limited to the six default choices unless Apple changes that.
    You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

  • My iphone 4 does not make any sound except when i have call. Any sound notification for example whatsapp or email or playing song i could not hear a pip, but when blug the earphone i could hear all sound via earphone, any advise??

    My iphone 4 does not make any sound except when i have call. Any sound notification for example whatsapp or email or playing song i could not hear a pip, but when blug the earphone i could hear all sound via earphone, any advise??

    Check the Mute switch, which is on the left side of the phone above the volume buttons.

  • Sound Notifications for Missed Calls and Text Messages

    Aside from the very small green light in the upper right corner (Bionic) - is there a way to get audio notifications for missed calls and texts?  I'm missing a lot of calls and texts because I'm not checking the screen constantly.  Thanks!

    I am not sure about the Bionic phone specifically but I am pretty sure there should be notification sounds.
    My phone, the Droid 2 global has ringtons, and notification sounds separately.
    Have you tried looking in the sound settings?

  • My 5s is stuck on one sound notification for mail.

    My iPhone 5S will not let me change the sound settings for ring tone/text tone/new mail/etc.  When I go to Settings--Sounds and make choices, they show on the screen, but the old/original sounds are still what the phone emits when in use.  I did update to 8 (or whatever it's called) and things don't work like they used to.  But these sound notifications are my basic problem.  Any suggestions?  Thanks, Ron

    Try inserting and removing the headphone jack seven or eight times.

  • Optical audio and surround sound speakers for my Mac Pro

    In the back of my Mac Pro there's an in and out for Optical Audio. What is this and are there any surround sound speaker systems out there that will plug into it? Most surround sound speakers seem to require a PC-style triple-input, with three jacks (Green to front, Orange to centre and Black to rear channels). Very few surround sound systems have the additional option for a single headphone socket-style jack, and I'm not sure if they will work terribly well with this single connection.
    Can anyone recommend some speaker choices, particularly in the UK, that will give me good surround sound from the optical audio or single headphone jacks? Many thanks.

    You might want to look at a device called the Griffin FireWave: [http://www.griffintechnology.com/products/firewave]
    It connects to your MacPro via firewire, and has the green/orange/black jacks out to a standard 5.1 speaker system.
    It comes with a software application that lets you customize the sound, and also synthesize surround from mono, stereo, etc., sources.
    It would definitely open up your choices for speaker systems. I'm using one with a Klipsch 5.1 Promedia set of speakers. Works and sounds great.

  • I used a maxtor and now a notification for notificiationExec pops up ever 10 seconds. help

    I tried conecting my maxtor hard drive up to my macbook pro, and now a notification saying you can't open the applicaiton NotificationExec because powerPC applications are no longer supported pops up every 10 seconds. Please how do I make them stop, I can't use my computer with this happening.

    Uninstall "Maxtor Hard Drive Manager" according to the developer's instructions -- NOT by dragging an application to the Trash or searching for files by name.

  • Configure and use push notifications for IOS - Xamarin

    Is it possible to configure and use push notifications in SharePoint 2013 apps for iPhone Xamarin.
    Recently I started creating a Xamarin application that supports both Android and IPhone application. So my doubt here is, Is it possible to create a solution in SharePoint Server for sending
    push notifications and a client side iOS - Xamarin application for receiving the notifications.
    If Possible how I can create the same. Please help. If it is not possible anyone please suggest me a workaround to implement the same.

    This is not a permanent fix but through this you can easily use the apps
    Go to Settings> General> Accessibility> Guided Access
    Now tap the Guided Access and turn it on.
    Now go straight to the app which is having this problem. After opening the app press the home button 3 times to activate the Guided Access mode.
    After activating and choosing a password you'll see that there is no "connect to iTunes to use push notifications in ios 8.1" pop up any more.
    If you want to leave the app press the home button three times again.
    Thanks
    It works 100%

  • Monitoring and Controling Incoming Requests for Chat with a Customer Service Agent

    I've reviewed the suggested threads, but I do not see one that captures the essence of my query.
    Bascially, I want to set up a generic Chat ID called "Customer Service".
    Users would open a chat to this ID and ask their question.
    On the backend a monitoring module would look for CHAT available CS Agents, and route the call to the first available.
    IF no one is available the user would recieve a reply that there is X minutes wait and give them the option of waiting or getting a chat back when someone comes available.
    Has anything like this been developed?

    I haven't seen something exactly like that, but it sounds pretty close to IManExpert:
    http://research.microsoft.com/en-us/projects/imanexpert/ 
    That's worth checking out I'd say.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications

  • HT3576 Can you get sound notifications for mail and iMessage with the new iPad. Under general sounds I have a sound selected for both of those. My volume is turned all the way up but I still don't get sound notifications with these apps. Suggestions?

    I have sound turned on under general> sounds. The volume is all the way up and I can hear it when i adjust it. However under notifications sound is not an option for mail or iMessage. Just badges and alerts. Both of which are on. I would really like to hear my notifications. Any suggestions.

    1. Double-click the Home button and swipe Task Bar to the right
    2. Check the volume and mute settings
    http://i1224.photobucket.com/albums/ee374/Diavonex/6d3191ba.jpg

Maybe you are looking for

  • Help ! for date column type

    Hi, I am having two tables tdz12 and tdf31. TDF31 is a date field. and TDZ12 is transactions history table. If I do 11:30:39 SQL> alter session set nls_date_format='DD-MON-RRRR HH24:MI:SS'; 11:30:57 SQL> select c65201 from tdf31; C65201 30-NOV-2006 0

  • Can't shutdown as user

    Hi, I just followed the Wiki-Entry on how to make users able to shutdown/reboot the system, but I get the following error: user /home/user $ sudo halt sudo: sorry, you are not allowed to preserve the environment My sudoers file: Defaults:user timesta

  • Different image behavior within same document

    Hello, I'm making a catalog for which I got photos  from various sources but mainly white background JPGs. I noticed that  when I place them in InDesign document some of them have transparent  background and some not. I checked in photoshop and backg

  • I uninstalled Lync 2010 and it still launches. How do I uninstall it?

    This is a weird one I know but I need to uninstall Lync 2010 on several laptops. My process has been to uninstall it from add/remove programs. It seems to uninstall properly. Note that I think it is a click to run version of Lync. However, on a reboo

  • PSE 8 .mov files cannot play

    Hello.  I just upgraded my PC to Win 7 64bit, clean install.  I then added Itunes / quicktime.  Then I installed PSE8 and restored my catelog from a backup.  All is well except I cannot play mov files within PSE8.  My point and shoot takes HD vid cli