CUPC Error - Failed to start conversation Start conversation capability is not available
We are running CUCM 7.1.5.32900-2 and Presence 8.5.2.10000-49.
When some of the users highlight numbers and call them using click to call (The click to call that comes as a part of CUPC), they are getting the following error box...
Error
Failed to start conversation
Start conversation capability is not available
Our users typically have 7941 phones that are associated with their user. They are not using softphone.
Has anyone else come across this error, and what was the culprit?
Thanks,
David
Hi David,
http://www.cisco.com/en/US/docs/voice_ip_comm/cups/8_0/english/install_upgrade/deployment/guide/deploy.html
Cannot Place or Receive Calls After a Secure Profile is Enabled
Problem After a secure profile is enabled for a user, the user cannot place or receive calls. The user might see the following error message multiple times:
Failed to start conversation
The user can use the instant messaging features.
This problem occurs if a secure profile is enabled for the user in Cisco Unified Communications Manager while either of the following is true:
•The user is signed in to Cisco Unified Personal Communicator.
•The cucsf.exe process is running on the computer of the user, that is, Cisco Unified Personal Communicator is running, but the user has not signed in.
Ask the user to sign out of Cisco Unified Personal Communicator, then sign in again.
Hope it helps,
Anand
Similar Messages
-
CUCIMOC 8.0 Error "Start converstation capability is not available"
I've got a user that I'm trying to setup CUCIMOC 8.0 for. We're using the latest CUCIMOC client release, Office Communicator 2008 R2 at the latest CU level, and Call Manager 7.1. I've got everything setup for the user identically to how other (working) CUCIMOC users on our CM are setup. The user is able to login to the CUCIMOC client, and is able to use his phone to make calls, but when he tries to use the softphone he gets the error message:
"Failed to start converstation. Start conversation capability is not available."
Digging further, when looking at this device in CUCM Admin, the softphone device shows up as Active and Trusted, but doesn't show a registration.
Looking further, in the Core client log from his machine, I get the error below (indicating the softphone isn't able to register):
Any ideas?
2011-04-25 12:41:46,292 INFO [ws-pool-thread-2] [EventAdapter] [SpringWSServiceLogger.logMessage(137)] - SOAP Incoming --- SystemServiceEndpoint - <heartbeat xmlns="http://service.system.v2.soap.uc.cisco.com"><clientId>CUCIMOC-1</clientId></heartbeat>
2011-04-25 12:41:46,293 INFO [ws-pool-thread-2] [EventAdapter] [SpringWSServiceLogger.logMessage(137)] - SOAP Outgoing --- SystemServiceEndpoint - <ns2:heartbeatResponse xmlns:ns2="http://service.system.v2.soap.uc.cisco.com" xmlns:ns3="http://system.v2.soap.uc.cisco.com/types"><ns2:ok>true</ns2:ok></ns2:heartbeatResponse>
2011-04-25 12:42:02,911 ERROR [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(69)] - 17:42:02.911 [11d0] SIP : sip_tcp_read_socket : socket error=92011-04-25 12:42:02,911 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.911 [11d0] SIPCC-SIP_REG_STATE: 1/51, sip_reg_sm_process_event: SIP_REG_STATE_REGISTERING <- E_SIP_REG_TMR_RETRY2011-04-25 12:42:02,911 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiSetCcmConnStatus(175)] - Status of CCM 'mdsn-cmpub1' is NONE
2011-04-25 12:42:02,911 ERROR [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(69)] - 17:42:02.911 [11d0] SIP : sip_tcp_detach_socket : Invalid socket2011-04-25 12:42:02,912 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiSetCcmConnStatus(175)] - Status of CCM 'mdsn-cmsub1' is NONE
2011-04-25 12:42:02,912 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiSetCcmConnStatus(175)] - Status of CCM 'mdsn-cmpub1' is NONE
2011-04-25 12:42:02,912 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiLineRegState(119)] - Registration status for line:1 is:false
2011-04-25 12:42:02,912 DEBUG [Thread-19] [SoftPhoneProvider] [SoftPhoneConnectionContext.lineNotify(777)] - Registration state not changed
2011-04-25 12:42:02,912 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.911 [11d0] SIPCC-UI_API: ui_set_ccm_conn_status: ***********CUCM mdsn-cmpub1 Not connected***********2011-04-25 12:42:02,912 ERROR [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(69)] - 17:42:02.911 [11d0] SIPCC-LINE_NUM: sip_platform_localexpires_timer_stop: Error: Line number (60) is invalid2011-04-25 12:42:02,912 ERROR [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(69)] - 17:42:02.911 [11d0] SIPCC-LINE_NUM: sip_platform_localexpires_timer_stop: Error: Line number (61) is invalid2011-04-25 12:42:02,912 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.911 [11d0] SIPCC-UI_API: ui_set_ccm_conn_status: ***********CUCM mdsn-cmsub1 Not connected***********2011-04-25 12:42:02,913 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.911 [11d0] SIPCC-UI_API: ui_set_ccm_conn_status: ***********CUCM mdsn-cmpub1 Not connected***********2011-04-25 12:42:02,913 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.912 [12bc] SIPCC-UI_API: 1/0, ui_set_sip_registration_state: 02011-04-25 12:42:03,011 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiRegAllFailed(138)] - Registration failed for all lines:
2011-04-25 12:42:03,011 ERROR [Thread-19] [SoftPhoneProvider] [SoftPhoneConnectionContext.regAllFailed(850)] - All registrations failed.
2011-04-25 12:42:03,011 DEBUG [Thread-19] [SoftPhoneProvider] [SoftPhoneConnectionContext.updateRegStateAllLines(1073)] - regState = falseHi,
Try the following-
1) Uninstall local antivirus/firewall
2) disable all network adapters except the one being used
3) update hardware driver such as video and audio
4) uninstall cucimoc and re-install using local admin permission
Also try the latest version cuci-lync 8.5.2 (it is compatible with OCS 2007 R2 and up)
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucimoc/8_5/english/release/cucimocReleaseNote.html#wp64340
http://www.cisco.com/cisco/software/release.html?mdfid=283665631&softwareid=283732952&release=8.5%282%29&relind=AVAILABLE&rellifecycle=&reltype=latest&i=rm
Thanks -
macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.
I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
After making your backup try the following:
Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
Launch the App Store, click the "Store" menu, and sign in with your AppleID.
Open the main page of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/ -
Hi everyone,
I'm running UCCX 8.01 + CUCM 7.1+ Cisco 7942 just for learning purpose. After creating the Outbound Campaign and imported the Contact List the call is received by the agent (call is state is received as Offering) but after press the Accept, Reject or any othe action button is received the error:
Error Unable to communicate with Enterprise Server. outbound Option not available (attached to post).
What does this mean?
Regards
Please rate all useful posts
Favor calificar todos las respuestas útiles.
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice, CCNP Voice CertifiedAny idea?
Please rate all useful posts
Favor calificar todos las respuestas útiles.
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice, CCNP Voice Certified -
Error: -1612 The installation source for this product is not available. Ver
Hi,
I am trying installing the FA in SAPB12005A SP01 PL36. and I received this error message:
Error: -1612 The installation source for this product is not available. Verify that the source exists and that you can access it.
How can I resolved this?
Regards,
IANI am getting the exact same error. How come anyone else did not get it?
The procedure I followed was :
Downloaded and installed the "download manager" first.
Then selected all product updates from BOXI3.1 Enterprise
It downloaded 58 items. After an inquiry I came to know that you need to install only the latest patch, i.e. Patch 1.7 will include all previous patches. So I was running 1.7 and getting this error constantly, and unable to install it at all.
I tried downloading it from different places and networks, same error persists. -
Can not start instance SAP - ABAP Database is not available via R3trans
Dear all !
My OS : Linux RHEL 4U7 32bit
Oracle 10G R2 32bit 10.2.0.2
when system running but power off suddenly
and when power on ->
i am having problem as below when i start instance SAP (Databse Oracle Started)
Step 1 : I login user (ora<sid>) of Oracel to start up database
Database startup -> OK
then i tried to shutdown database -> OK too
and start up again -> OK
Query -> OK
I think Database do not problem
Step 2: start listener -> OK
Step 3: i login user (<sid>adm) and startup instance SAP (command : startsap r3) with error:
Checking SED Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
11:11:48 10.02.2010 LOG: Effective User Id is root
This is Saposcol Version COLL 20.90 700 - Intel x86 with Linux, PL:75, Aug 29 2006
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 6870) is already running .....
saposcol already running
ABAP Database SED must be started first
Please help me to resolve this problem
Thanks for your adviceDear all !
1. output of tnsping SED :
TNS Ping Utility for Linux: Version 10.2.0.2.0 - Production on 11-FEB-2010 13:51:24
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/SED/102_32/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(HOST = sapsed)(PORT = 1527))) (CONNECT_DATA = (SID = SED) (GLOBAL_NAME = SED.WORLD)))
OK (0 msec)
2. output startsap_.log
Checking SED Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
saposcol already running
ABAP Database SED must be started first
---> output above repeats many
3. output trans.log
4 ETW000 R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 11.02.2010 - 13:49:36
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Thu Feb 11 13:49:36 2010 159 0.000159
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000186
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 55 0.000241
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/SED/SYS/exe/run/dboraslib.so' ...
4 ETW000 63 0.000304
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/SED/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000 16430 0.016734
4 ETW000 [dev trc ,00000] Library '/usr/sap/SED/SYS/exe/run/dboraslib.so' loaded
4 ETW000 56 0.016790
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/SED/SYS/exe/run/dboraslib.so
4 ETW000 41 0.016831
4 ETW000 [dev trc ,00000] Version of '/usr/sap/SED/SYS/exe/run/dboraslib.so' is "700.08", patchlevel (0.73)
4 ETW000 94 0.016925
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/SED/SYS/exe/run/dboraslib.so
4 ETW000 38 0.016963
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/SED/SYS/exe/run/dboraslib.so
4 ETW000 68 0.017031
4 ETW000 [dev trc ,00000] New connection 0 created 44 0.017075
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 46 0.017121
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 38 0.017159
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 37 0.017196
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 39 0.017235
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.2.0' 480 0.017715
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 42 0.017757
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 3789 0.021546
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 48 0.021594
4 ETW000 [dev trc ,00000] Connecting as /@SED on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000 51 0.021645
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 43 0.021688
4 ETW000 [dev trc ,00000] 0 UTF8 1 0x9511ea0 0x951750c 0x9516d94
4 ETW000 40 0.021728
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 40 0.021768
4 ETW000 [dev trc ,00000] Allocating server context handle 52 0.021820
4 ETW000 [dev trc ,00000] Attaching to DB Server SED (con_hdl=0,svchp=0x9516d20,svrhp=0x9528504)
4 ETW000 88 0.021908
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12505
4 ETW000 4712 0.026620
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12505'
4 ETW000 49 0.026669
4 ETW000 [dev trc ,00000] Try to connect with default password 62 0.026731
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@SED on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000 39 0.026770
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 56 0.026826
4 ETW000 [dev trc ,00000] 0 UTF8 1 0x9511ea0 0x951750c 0x9516d94
4 ETW000 47 0.026873
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=0x9528504)
4 ETW000 37 0.026910
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x9516d20,srvhp=0x9528504)
4 ETW000 37 0.026947
4 ETW000 [dev trc ,00000] Deallocating server context handle 0x9528504 45 0.026992
4 ETW000 [dev trc ,00000] Allocating server context handle 48 0.027040
4 ETW000 [dev trc ,00000] Attaching to DB Server SED (con_hdl=0,svchp=0x9516d20,svrhp=0x9528504)
4 ETW000 60 0.027100
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12505
4 ETW000 1538 0.028638
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12505'
4 ETW000 41 0.028679
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 12505 performing CON [dblink#3 @ 431]
4 ETW000 131 0.028810
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-12505: TNS:listener does not currently know of SID given in connect descriptor [dblink#3 @ 431]
4 ETW000 39 0.028849
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'SED'"
thansk for your help
Edited by: myfriend280985 on Feb 11, 2010 7:53 AM -
Error after Installing PDK - (404 The requested resource is not available)
Hi
I recently installed my PDK over my existing Portal 6.0 using SDM Tool. I downloaded PDK_6.0.14.0_BusinessPackage from SDN. I deployed pdkcontent6.0.14.0.SCA file using the SDM Tool. It installed successfully. But when i go and check the links under 'Portal Content Development ' , it gives me a 404 - The requested resource is not available.
Please help out.
Regards,
Murali.Hi All,
I am also unable to deploy pdkcontent6.0.14.0.sca completely. I get the exception below
===========================================================================
Deployment started Thu Jun 22 11:01:34 IST 2006
===========================================================================
Starting Deployment of TutWD_KMBrowser
Finished with warnings: development component 'TutWD_KMBrowser'/'local'/'LOKAL'/'0.2005.11.09.09.51.44', grouped by software component 'pdk-content'/'com.sap'/'SAP AG'/'1000.630.0.1.0.20051130181343':
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application local/TutWD_KMBrowser and wait. Reason: Clusterwide exception: server ID 309660150:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application local/TutWD_KMBrowser cannot be started. Reason: it has hard reference to resource com.sap.km.application with type application, which is not active on the server.
at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:596)
at com.sap.engine.services.deploy.server.ReferenceResolver.processMakeReference(ReferenceResolver.java:399)
at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:328)
at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:178)
at com.sap.engine.services.deploy.server.application.StartTransaction.begin(StartTransaction.java:147)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:327)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:111)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:230)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4705)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4610)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4583)
at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception while starting: sap.com/com.sap.km.application', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Exception while starting: sap.com/com.sap.km.application
at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.prepareStart(PortalRuntimeContainer.java:527)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4359)
at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:588)
... 21 more
Caused by: com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception while starting: SAPJ2EE::local/TutWD_KMBrowser', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Exception while starting: SAPJ2EE::local/TutWD_KMBrowser
at com.sap.portal.prt.sapj2ee.SAPJ2EEPortalRuntime.getAndStartSAPJ2EEApplicationItem(SAPJ2EEPortalRuntime.java:886)
at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.prepareStart(PortalRuntimeContainer.java:511)
... 23 more
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [ExternalApplicationItem.prepare]: SAPJ2EE::local/TutWD_KMBrowser
at com.sapportals.portal.prt.core.broker.ExternalApplicationItem.prepare(ExternalApplicationItem.java:188)
at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:232)
at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.start(SAPJ2EEApplicationItem.java:192)
at com.sapportals.portal.prt.service.sapj2ee.Mediator.getAndStartExternalApplication(Mediator.java:132)
at com.sap.portal.prt.sapj2ee.StartPortalApplication.coreRun(StartPortalApplication.java:59)
at com.sap.portal.prt.sapj2ee.SAPJ2EEPortalRuntime.getAndStartSAPJ2EEApplicationItem(SAPJ2EEPortalRuntime.java:882)
... 24 more
Caused by: com.sapportals.portal.prt.core.broker.PortalApplicationNotFoundException: Could not find portal application com.sap.km.application
at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:415)
at com.sapportals.portal.prt.core.broker.ExternalApplicationItem.prepare(ExternalApplicationItem.java:180)
... 29 more
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment of TutWD_KMBrowser finished with Warning (Duration 9504 ms)
Starting Deployment of pdk-content
Finished with warnings: software component 'pdk-content'/'com.sap'/'SAP AG'/'1000.630.0.1.0.20051130181343':
No further description found.
Deployment of pdk-content finished with Warning (Duration 1152 ms)
===========================================================================
Deployment ended Thu Jun 22 11:01:47 IST 2006
===========================================================================
Please resolve this issue.
Regards,
Amjad -
Bluetooth [BT] failed during use.Menu bar icon remains as does two BT icons in Utilities folder. System Prefs. BT icon totally gone. Remaining icons say "No BT Hardware Found" - " BT Not Available" etc. Have 3 yr. old MacBook Pro Notebook with OSX 10.6.8 & built-in Bluetooth. [ Close by iPad's BT remains functional. ]
Yeah the Bluetooth hardware has failed and needs to be replaced. there is nothing you can do except replace the BT chip. Take it to Apple.
-
Getting this error when running a form. HTTP Listner is not available
I am using windows XP Professional. I have the 9i database running fine. I can launch form developer and connect to my database (which is on the same machine but in different homes.) I get a Http listner error no available when I go to run the form. I looked at my administrative settings for the HTTP listner service but I do not see it I only see the TNS lister.
Does any one know what I need to do run a form successfuly with getting the HTTP listner errorHi,
to start OC4J you go to start--> programs --> Oracle9i Developer Suite --> Forms Developer --> Start OC4J Instance
Frank -
I log onto the following URL:
>http://15thcircuit.co.palm-beach.fl.us/web/guest/adminorders/series1<
I click on a link whose URL is:
>/15thcircuit.co.palm-beach.fl.us/c/document_library/get_file?folderId=149&name=DLFE-1775.pdf<
The screen opens with the error message shown in my question above.put your biplab folder inside root folder under tomcat\webapps\root
http://localhost:8080/biplab/hello.jsp -
My iPhone 4S has downloaded the new update for the Is07 update but when it comes to installing it I click the agree thing and then it says verifying update and an error pops up some time later saying update software is unavailable at this time try again later is anyone else having this issue???
I imagine a ton of people are attempting to download it right now. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.
-
I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
After making your backup try the following:
Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
Launch the App Store, click the "Store" menu, and sign in with your AppleID.
Open the main page of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/ -
Hello,
I have developed one SSIS Package in SSDT 2012 to create Reporting Database from SQL Datasource and 1 SharePoint List.
On Development Environment : (Windows Authentication)
Here everything is running fine.
On Test Environment Client Side : (Windows Authentication)
Deployed successfully.
Validating successfully.
While executing the package: getting below error.
SSISPackage:Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error Code : 0x80040E21.
An OLE DB record is abailable. Source: "Microsoft OLE DB Service Componenets" Hresult: 0x80040E21 Description: "Multipe-step OLD DB operation generated errors. Check each OLD DB status value, if available. No work was done.".
Execute SQL Task: Error: Failed to acquire connection "ReportingDB". Connection may not be configured correctly or you may not have the right permissions on this connection.
I have done below things:
On SSIS Package side,
1. DelayValidation is Set to True for all the connections and each tasks in package
2. RetainSameConnection : True
3. ProtectionLevel : DoNotSaveSensitiveData
On SSMS,
1. Created one Credential
2. Create Proxy under SSIS SQL Service Agent to run package as Windows User
3. Checked all the permissions and roles.
Below is the connection string which I am using.
Data Source=DBTEST;Initial Catalog=ReportingDB;Integrated Security=SSPI; persist security info=False;
Trusted_Connection=Yes;
Can anyone please help me? As I am trying to resolve this error for the last 4 days and could not find any solution yet.
Thank you,
Mittal.Can you try changing protection to - EncryptSensitiveWithUserkey
can you also enable DTC
To enable MSDTC on each Web server on Windows Server 2008
Click Start, click Run, type dcomcnfg and then click OK to open Component Services.
In the console tree, expand Component Services, expand Computers, expand My Computer, and then expand Distributed Transaction Coordinator.
Right click Local DTC, and click Properties to display the Local DTC Properties dialog box.
Click the Security tab.
In the Security Settings section, click Network DTC Access.
In the Client and Administration section, select Allow Remote Clients and Allow Remote Administration.
In the Transaction Manager Communication section, select Allow Inbound and Allow Outbound.
In the Transaction Manager Communication section, select Mutual Authentication Required (if all remote machines are running Windows Server 2003 SP1), select Incoming Caller Authentication Required (if running MSDTC in a cluster), or select No Authentication
Required if some of the remote machines are pre-Windows Server 2003 SP1. No Authentication Required is the recommended selection.
Select Enable XA Transactions, and then click OK.
Repeat steps 1 through 9 on the other Web servers.
Please mark
this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Hi, we had installed SharePoint Service Pack 1 (SP1). And now the user profile service application is not available. Getting this
Error "This User Profile Application’s connection is currently not available. The Application pool or user profile service may not have been started".
How to troubleshoot the issue anh help/thoughts will be appreciatedNot sure, if this will help, but in my case all of my services were up and running (including app pools) and also IISRESET did not help. So at that point, looking at the error message, I assumed that there is something wrong with the app pool (or app pool
credentials) and went to CA --> Application Management --> Manage Service Applications and selected UPSA and under properties just created a new app pool to run under farm account (did not want to take any chances).
As soon as the new app pool was provisioned, the service came back.
Thanks, Ransher Singh, MCP, MCTS | Click Vote As Helpful if you think that post is helpful in responding your question click Mark As Answer, if you think that this is your answer for your question. -
Win Server 2012 Failover Cluster - Error: Failed to bring cluster disk online
Hi Technet
I'm currently running running 2 VMs Win Server 2012 and would like to test Failover Clustering for one of our FTP server
I've added on both servers an additional partition, formatted and Online
One of the drives comes Online but cannot bring the 2nd disk online from the cluster manager
Error: failed to bring resource online - clustered storage is not connected to the node
Assistance would be greatly appreciated
Thank you
JabuHi jsibeko,
Since the VMware offer the MSCS shared storage solution themselves, I suggest you first ask VMware whether that shared storage is supported with your vSphere edition, I found
some VMware KB about the VMware shared storage for MSCS, may you can get more tips.
The VMware KB:
Microsoft Clustering on VMware vSphere: Guidelines for supported configurations (1037959)
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1037959
Microsoft Cluster Service (MSCS) support on ESXi/ESX (1004617)
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004617
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Maybe you are looking for
-
What's the difference between R/3 Enterprise extension set 1.10 and 2.00 ?
Hi there, Anyone know how to find the difference between 47x110 and 47x200. I want to install the new IDES R3 which is 47x200 (I found some program/source that I need in this version). But our PRD system is 47x110. thanks in advance, Doris
-
Using table filters with transient VO attributes
Hi, I have a the following use case and I cannot seem to find a valid solution on my own without falling into deep depression and/or psychotic delirium. Anyway, I'm sure there's a solution and that it's pretty simple, and hopefully someone here will
-
Change SAP Standard Transaction
I need to call one standard Tcode in Portal. That Tcode is having four Tabstrip. Requirement is each tabstrip showed in different pages also only few fields should be shown. Can you help me in this? Can I do only using Web dynpro and Portal? Is it ne
-
Business One and Open Source Web Front-Ends, PHP etc.
Hi there, I am a complete newbie to all things SAP, so please excuse my ignorance. I am trying to implement a solution for SAP Business One, including a web front-end for queries and information. The SAP backend is running on a SQL Server, Windows 2
-
I use my iPhone in the car almost every day for music or podcasts (including video). I am not watching while driving, but from time to time take a quick look on what's going on in the video. The thing is that after a video podcast is played in landsc