CUPS 8.X integrated with Microsoft OCS

Hello all,
I'm looking for a list of pros cons for whenever you integrate presence with Microsoft OCS is there a doc out there that will tell you which features you will not have in OCS if you do an integration like this ?
or is there a document that will show what features are supported ?
thank you

Not sure if it helps but in the first pages of the document below you have an overview of the integration with the supported / unsupported features and the limitations
http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns728/ns784/870259.pdf
HTH
Christos

Similar Messages

ECC 6.0 integration with Microsoft Dynamics CRM

Hi All
I am working on a ECC 6.0 integration with Microsoft Dynamics CRM. I need to send the customer master data, va01/va02, vl01n/vl02n/ vf01/vf02 to CRM system. One option I have is to send in the form of IDOC with TRFC - TCP/IP. But looks like this needs a middleware like Biztalk.
Is there a way I can send this data using a Internet service in ECC 6.0 ??? As this would cut the cost of the Biztalk.
I really appriciate your thoughts on this. We don't have XI either.
Thanks a lot
Van

HI Van Dan Jan,
We have just implemented integarion of SAP with Microsoft stack (Microsoft CRM, Share point and Axapta), But in all integration BizTalk as a middleware used.
There is two way requirements :
1. whenever Most of the control are at the Microsoft level like : Customer creation, Creation of orders, which need to be synchronus activity we have used RFC which internally calls BAPI. (So SAP adapter Configured at BizTalk). and whenever Biztalk receives request file from CRM or share point to there location they call SAP RFC's.
2. When DATA is needed from SAP to microsoft stack like to syncronize the missing transaction like customer pad and all.
Scheduled job at BizTalk end which call SAP to get the DATA via RFC mode :
In SAP we have two things
1. if DATA size is small (below 2 MB) like in last 1 hrs what are the sales contract created in SAP that need to updated in Microsoft other system than Biztalk will trigger a job at 1 hr interval or on deemand to get the detail which directly we pick from data base or using BAPI to get the detail via RFC.
2. If Data Size is large (more than 2 MB) like total transation happened in a day for all customers: then we wriiting the data in OS or application server and that job also get initiated from Biztalk end by sending any parameter to SAP.
advantage of using BizTalk is most of the control you can give it to them so they can run there job on deemand basis.
There is a something known as web service we can use to avoid Interfacing tool, but I dont have much Idea about that,
and please check how many interfacing point is there with SAP in your project, because if Interfacing points are more then I think it is not good to write a web services for so many things.
do let me know if you need further information.

SAP Workflow integrated with Microsoft Outlook

Hello All,
I have the following question. When an work item comes in the SBWP inbox, as soon as the work item is executed by the user
the workitem disappears from the SBWP. Now my question is if SAP Workflow is integrated with Microsoft Outlook (so that email containing the work item as a link reaches Outlook), is there a way to make the email disappear from the Outlook as soon as the SAP work item is completed.
Can someone throw some light on the same.
Thanks,
Sachin

Hi,
Duet workflow scenario is available. SAP Application sends workitem to Duet Server and Outlook client has Duet add-in. You need Duet Server and user license.
Also SAP MAPI Service Provider is available. You can access SAP Inbox items from your outlook client. I think SAP MAPI Service provider is free.
Regards,
Masa

DPM integration with Microsoft Azure backup queries

Hi All,
We have made the test set-up environment with installed the below details
DPM 2012 R2 on VM (Windows 2012 R2)
We are using a raw disk of 200 GB for disk staging.
DPM integrated with microsoft azure.
Able to take file backup and databases backups from DPM and can perform the restore from Disk staging as well as from azure
Queries:
Will DPM support deduplication for exchange (2007,2010,2013) databases and for sql databases (2000, 2005,2008,2012,2014) ?
on the wire compression is enabled but how to verify that?
Is it possible to mount the raw disk to some other drives except local Disk (C:\)
How to do granular recovery in DPM 2012 R2 for microsoft exchange?

Chris,
Really sorry for the delay in response.
I found lots of warning messages in the logs like below one:
578 788 24-Apr 20:49.7 18 readeriterator.cpp(587) [000000002435A140] 0BABF215-19DF-49F5-B8DF-7210CB336DD5 NORMAL
"CFileReaderIterator:GetNextFileReader -> Skipping Hardlink with Physical FilePath: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy34\Windows\WinSxS\amd64_microsoft-windows-i..l-keyboard-0001042b_31bf3856ad364e35_6.2.9200.16384_none_f8e4c1f6d2951dd3\KBDARMW.DLL,
Logical FilePath: \\?\Volume{bd3973d0-2f82-11e4-93f6-806e6f6e6963}\Windows\WinSxS\amd64_microsoft-windows-i..l-keyboard-0001042b_31bf3856ad364e35_6.2.9200.16384_none_f8e4c1f6d2951dd3\KBDARMW.DLL"
578 788 24-Apr 20:49.7 18 readeriterator.cpp(587) [000000002435A140] 0BABF215-19DF-49F5-B8DF-7210CB336DD5 NORMAL
"CFileReaderIterator:GetNextFileReader -> Skipping Hardlink with Physical FilePath: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy34\Windows\WinSxS\amd64_microsoft-windows-i..l-keyboard-0001042e_31bf3856ad364e35_6.2.9200.16384_none_fa395780d1ba2b68\KBDSOREX.DLL,
Logical FilePath: \\?\Volume{bd3973d0-2f82-11e4-93f6-806e6f6e6963}\Windows\WinSxS\amd64_microsoft-windows-i..l-keyboard-0001042e_31bf3856ad364e35_6.2.9200.16384_none_fa395780d1ba2b68\KBDSOREX.DLL"
So, I'm checking with concerned guys in here about this. I'll get back to you once I receive any update from them. However, if it very urgent and need immediate assistance, I suggest you to open up a support ticket with Azure technical Support team
as they will be able to provide you very quick solution.
Regards,
Manu

CCME integration with Microsoft Business Contact Manager

Hi,
Can anyone tell me, if a CCME can be integrated with Microsoft BCM such that when a call comes in details of the client pop up, should they exist in the Business Contact Manager.
Finding exact information is like find a needle in a hay stack.
Regards
LN

Hi Swinster,
Apologize for the late reply.
What is your current situation? As JS2010 stated, also in this KB article:
http://support.microsoft.com/kb/2101557
During the 'Specialize phase' of Sysprep, Sysprep.exe looks at the Last Modified Date of the ntuser.dat file for each user profile to determine which user profile to copy to the default user profile. However, the earlier cleanup functions of sysprep.exe
loads each Ntuser.dat file to make security ID (SID)generalizations. You cannot predetermine which user profile will be copied if more than one user profile exists.
How about we skip the copyprofile option?
Further, see if the following article would help to customise the user profiles settings:
Configuring Default User Settings – Full Update for Windows 7 and Windows Server 2008 R2
http://blogs.technet.com/b/deploymentguys/archive/2009/10/29/configuring-default-user-settings-full-update-for-windows-7-and-windows-server-2008-r2.aspx
Or we may consider seek help at the office outlook forum for the BCM deployment.
Best regards
Michael Shao
TechNet Community Support

Groupware integration with microsoft exchange server

I have a query regarding Groupware integration with microsoft exchange server.whether we require IIS server and microsoft exchange server on the same machine for groupware integration.or they can be on different machines.
thanks,
Pramod

hi,
We actually implemented integration of SAP with microsoft exchange server. It is not necessary for server and IIS to be in the same machine.
regards,
Ganesh.N

Integration of Microsoft OCS 2007 with WebCenter Spaces 11G PS4

Hi All,
I want to know has anyone successfully integrate Microsoft OCS 2007 with WebCenter Spaces 11G PS4? If yes, pls share detail. Thank you.
Regards,

Hi,
I am also facing the same issue, not sure about what url to use. And also the login webservice doesn't work while I am testing using http://localhost:81/RTC/RTCService.asmx. It always throwing the following error
" Unable to cast COM object of type 'RTCLib.RTCClientClass' to interface type 'RTCLib.IRTCClient'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{07829E45-9A34-408E-A011-BDDF13487CD1}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE))."
Is the current owc_lcs.zip support MS Office Communication Server 2007?
Please share the configuration step if anyone already integrated OCS 2007.
Thanks,
-Mukesh.
Edited by: user9127933 on Feb 19, 2010 4:05 AM

Oracle HRMS Integration with Microsoft Exchange Server 2007

I would like to know if it is possible to integrate Oracle HRMS 11.5.10.x with Microsoft Exchange Server 2007 using Microsoft Identity Lifecycle Management (ILM) 2007?
Has anyone ever come across something like this and successfully achieved it? Does anyone know of a step-by-step guide (or forum discussion) to achieve this?
Response(s) will be highly appreciated.

hi,
We actually implemented integration of SAP with microsoft exchange server. It is not necessary for server and IIS to be in the same machine.
regards,
Ganesh.N

Integration with Microsoft Exchange!!! How is it???

Hi!
I need to know in which level of integration has Oracle Portal with Microsoft Exchange?
Do we have any Pre-Built Portlet?
Thank you!

Eduardo,
Download the MS Exchange portlets here, and look at the documentation here.
regards,
Stewart

Dreamweaver Integration with Microsoft Sharepoint

Can pages designed in Dreamweaver be integrated with a
website run on Sharepoint (a Microsoft Office application)?

I have successfully copy/pasted code from Dreamweaver into
SharePoint Designer, and imported images and scripts into Designer
so the relative paths resolve. I found your post because I'm
searching for info about using only Dreamweaver without Designer as
an intermediate step.

SAP Integration with Microsoft

Hi,
what are the different ways of integration from SAP to Microsoft and Reversal ?
For Example: SAP-> MS SharePoint , SAP -> MS ChangePoint (PSA Software)

Hi Nawaz,
Check these, about Sharepoint integration with SAP PI:
Sharepoint integration with SAP PI
Interoperability between Microsoft .Net 3.5 and EHP 1 for SAP NetWeaver PI 7.1 (Article)
I havent work with Changepoint, but if i was you i would read about the kind of interfaces that support to take the more appropriated in SAP PI.
Regards,

PS integration with Microsoft EPM

Hi,
My company is in the midst of integrating PS with Microsoft EPM solutions.
Is there anyone out there has experience in performing this integration?
We would like to hear your story and opinion as we don't have much experience on the integration part.
Would like to know whether the integration will work both ways between PS-EPM or it should only be done from PS-EPM only.
Appreciate your reply
Fadhil.

Hi Fadhil,
When trying to integrated SAP PS with EPM, i would advise an off the shelf product rather that developing a bespoke solution. TPG's PSLink is the world leading integration tool in this area, is SAP certified and offered bidirectional interfacing of data.
Regards,
Peter

OIM integration with Microsoft CRM by using webservices? (OIM: Oracle Identity Management)

Hi Guys,
can you provide me integration document for my new project
OIM with Microsoft CRM, by using webservices.
Venkat
[email protected]

user1106726 wrote:
We currently have ILM 2007 in our environment with limited usage at the moment. We are looking at purchasing Oracle Identity Manager to implement an enterprise wide IAM solution.
We were wondering if it is possible to continue using ILM like a middleware between our AD forests and the Oracle IdM. Where the Oracle IdM is the overarching IAM solution and Microsoft ILM 2007/FIM 2010 is like the metadirectory for our AD forests.
Is this possible without installing the Oracle Management Connector on any of our DCs and using ILM as the directory that Oracle IdM connects to. All AD account provisioning/de-provisioning, acct updates, password sync/reset will be initiated from the Oracle IdM to ILM and then implemented on AD. In order words no direct interaction with AD domain controllers from Oracle IdM, everything will go to ILM and ILM in turn applies it to AD.
Is this possible?yes
>
Is there a custom connector that will work with ILM 2007/FIM 2010Yes, if you write one you will have a custom connector
>
Is this a simple customization or something that can be problematic and expensive?It won't be simple. Problematic and expensive maybe, depends on how good you are with OIM and ILM

Portal Integration with Microsoft Exchange 2007

Hi all,
I would like to integrate MS Exchange 2007 with portal so that I can enable all the groupware services including calendar, emails, appointments, availability etc.
Our Exchange landscape is integrated with our ADS, but portal uses its own user data store with a different set of User Ids.
I need to implement SSO between both these systems, where the user id is different.
I found few articles in SDN explaining how to configure SSO, but i couldn't quite find anything on how i can accomplish my objective here.
Can any of you help me out?
Thanks a lot
Shobin

Eduardo,
Download the MS Exchange portlets here, and look at the documentation here.
regards,
Stewart

Portal Integration with Microsoft Active Directory

We are working on a project to integrate Oracle9iAS Portal with Microsoft Active Directory. I am wondering if anyone has any experience with this and hence suggestions. Particularly, I'm wondering if its possible and how to use Active Directory to manage the Portal user accounts and group relationships?

Please note that we finally got this working. For Active Directories sake, I would suggest using userPrincipalName or sAMAccountName as the Unique Attribute. Also, note that Active Directory uses OUs for organization, not CNs, so the search base should be either just the DN of the domain or an OU in the domain. Also, be sure to specify the full DN of the Bind DN as in CN=Administrator,CN=Users,DN=domain,DN=com

CUPS 8.X integrated with Microsoft OCS

Similar Messages

Maybe you are looking for