CUPS enable DNS and domain
Hello All,
I'm planning to enable the DNS for an installed UC environment in ver. 9.1.
I'll configure the dns server and the domain name for the IM&P as well as for the CUCM.
I already populated my DNS server with A/PTR for the servers.
What is the best way enabling DNS? I know the constraint with ITL for CUCM cluster but for presence cluster?
thanks
lorenz
Please refer to this documentation.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/im_presence/ip_address_hostname/9_0_1/sip_domain.html
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/im_presence/deployment/9_0_1/CUP0_BK_D41159BD_00_deployment-guide-for-cup_chapter_0101.html#CUP0_TK_C61F6E2D_00
You will need tp restart Tomcat service because tomcat certificates will be regenerated when you change the domain name. You will also need to set the sip domain on the server(s)
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
Similar Messages
-
CUCM & CUP DNS and Domain name
Hello
CUCM 9.1, CUP 9.1 and CUC 9.1
I have not mentioned DNS or domain name on my CUCM and on my CUP, if i enable the DNS and domain name on the CUCM does it will change the license mac of CUCM AND CUP ???? which will cause me to rehost the license from the cisco licensing team.
thanksHi Jack,
You can do that. Nothing would happen.
please follow the links
https://supportforums.cisco.com/message/4109569#4109569
https://supportforums.cisco.com/thread/2227236
regds,
aman -
Oracle RAC 11.2 on Windows without DNS and DOMAIN
I am trying to install Oracle RAC 11.2 in windows 2008R2 64 bit which is on workgroup and no available DNS.
I read that SCAN requires DNS and in case DNS is not available, then host file will do but only one SCAN address will do.
Can anyone help me out on this set up. Any steps/procedure is highlyh appreciated.
thanks..Remember you can only resolve one scan IP if you're using hosts file
example
192.168.100.1 node1
192.168.100.2 node2
192.168.110.1 node1-private
192.168.110.2 node2-private
192.168.100.10 node1vip
192.168.100.20 node2vip
192.168.100.100 racscan
all nodes must have the same hosts file entries -
Real problems with ISP based DNS and Domain
Hi all,
I have an external based domain name that would like to incorpate into my new server. At the moment, the ISP (1and1) is dealing with Mail and Hosting. Ideally, I would like to run the Mail Exchanger and leave the hosting to the ISP. However, I' having some trouble configuring the whole thing!
Firsty, I'm slightly at a loss as to what to call my DNS when setting up the server for the first time. Should this be the same as my current Domain name? If so, would htis cause conflicts running this name side by side with my ISP (even if it would just be used for file sharing etc?).
I have a few more questions but if anyone can help me with this one I'd be most greatful. I'm fairly new to Servers (one of the reasons for getting an OS X Server as I was told of it's ease of use!!) but willing to learn!
Cheers,
OliYou can still get iTunes 9 for OS X 10.4, but you'll have to get updated to 10.4.11 first.
Here's the download link for iTunes 9:
http://support.apple.com/kb/DL1056
Let's test your internet connection. Perhaps your download is being interrupted along the way and you don't quite have the entire update.
Go here:
http://pingtest.net/
And let me know the results of the test.
~Lyssa -
How can I override the DNS Servers and Domain Name used by my Airport Time Capsule?
The defaults picked up from my ISP's DHCP are to use the ISP's DNS servers and ISP's domain. I do not want this.
With my prior router I set the DNS servers to Google's Public DNS (8.8.8.8 and 8.8.4.4) and my domain to either "bannister.us" (which I own) or "bannister.home". I do not want simple names resolving to some ISP default. (Yes, I know exactly what this does.)
In the Apple AIrport Utility (version 6.3.2) the fields for DNS and Domain do not allow editing. (Why??)
Is there some way to override this?Unfortunately not one that will work with the latest version TC.
The way around it is to use a different router.. It can be a very simple router.. I usually recommend units like the TP-Link WDR3600 as they take good third party firmware like gargoyle, openwrt, dd-wrt.. ie they have real controls and beyond that a proper Linux firmware with command line interface.
You can then change the TC over to static IP. It will not be the router.. but it will effectively become the local dhcp server.
I have adsl so I cannot reproduce your system.. I have a bridged modem.. a router.. AC66U.. and a TC.. but the TC is not in bridge.. it is in static IP mode.
Let me demonstrate.
By setting a range on the main router from 1-199 (leave a space.. ) so set the TC to 192.168.2.201 and then you can set DNS and domain as you like. Set the dhcp range (leave a space) you could use 203-253.. then I use the main router as 254.
It is brilliant.. all computers behind the TC receive the IP from the TC with whatever IP and dns (and domain although I haven't changed it).. Effectively the TC works as its own dhcp device.. but is merely a secondary dhcp server to the main unit.
(This gives me netflix which is why I do it.. from well outside the US).
It may be of use.
Why leave a space.. well it helps it to work.. I have not tested it but another person reported issues and found leaving a space .. ie last ip in the router.. 199, static ip 201.. first dhcp 203 (i used 205 to help me keep count!!). worked.. I have not tried to reproduce the problem.. so I reproduce the solution.. it might be like sheep jumping over the fence.. even if the fence was removed the sheep keep jumping over at the same place. Just say bahhh and do likewise. -
On my home wireless network, the iphone 5 won't let me enter the IP address, subnet mask and router info. I was able to enter the DNS and Search Domains. How do I open up those fields?
Apparently the router is not sending the info to the iphone. How can I make that happen?
-
SBS 2011 no longer issues DHCP leases: DHCP, DNS, and AD Errors
Hi all. On early 8/13/2012 and into the morning, our UPS failed several times. The battery seems to be fine but the unit was shutting off power to the unit which means the (Windows SBS 2011 Standard) server shut off unexpectedly several times.I replaced
the UPS.
Now I'm trying to figure out what in the world this did to the server. It seems DHCP, DNS, and AD all have issues, as seen in the logs below. The client PC's are going offline one-by-one because the leases are expiring and it can't connect to the server
to renew. When trying to start the DHCP service, I get a 20013 error saying it cannot be started.
So I attempted to follow a kb article and repair the database but that didn't work because it seems the Jetpack utility is not in SBS 2011? And even at that, I'm thinking it may not even be a corrupted DHCP database due to the other errors in the event log.
This is a small office and I only know enough to be dangerous but usually I can just follow a kb to fix any issues. But there are so many errors, this one has me stumped.. Could any Server whizzes identify the big picture here?
Level Date and Time Source Event ID Task Category
Critical 8/13/2012 1:33:12 PM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 11:30:37 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 8:23:24 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 8:05:08 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 7:38:04 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 7:29:29 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 12:55:11 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 12:15:49 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 12:09:49 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Level Date and Time Source Event ID Task Category
Error 8/15/2012 12:48:02 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/14/2012 2:23:37 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/14/2012 1:14:33 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/13/2012 8:06:12 AM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/13/2012 7:38:59 AM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/13/2012 12:16:52 AM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 5/31/2012 12:00:19 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 5/31/2012 11:14:20 AM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 4/18/2012 4:32:07 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 9/2/2011 2:14:09 AM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/30/2011 11:37:18 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/23/2011 1:52:28 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Level Date and Time Source Event ID Task Category
Error 8/15/2012 8:23:17 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 2:45:22 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:52:46 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:52:38 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:52:17 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:48:02 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:27:04 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:22:27 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 8:03:57 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 8:03:35 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 7:52:07 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 7:48:46 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 7:28:39 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 4:47:56 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 3:41:50 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:53:42 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:42:26 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:42:08 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:23:24 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:16:13 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 1:14:33 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 1:33:58 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:48:37 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:45:31 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:41:43 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:39:43 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:31:22 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 8:24:08 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 8:06:12 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 7:38:47 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 7:30:14 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 12:55:59 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 12:16:52 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Level Date and Time Source Event ID Task Category
Error 8/15/2012 12:52:46 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/15/2012 12:52:38 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/15/2012 12:52:17 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/15/2012 12:48:02 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/15/2012 12:27:04 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/15/2012 12:22:27 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 8:03:57 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 8:03:35 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 7:52:07 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 7:48:47 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 7:28:40 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 4:47:56 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 3:41:50 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 2:53:42 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 2:42:26 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 2:42:08 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 2:23:25 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 2:16:13 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 1:14:33 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 1:33:59 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 11:48:37 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 11:45:33 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 11:41:43 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 11:39:43 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 11:31:23 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 8:24:09 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 8:06:13 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 7:38:48 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 12:55:59 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 12:16:52 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Level Date and Time Source Event ID Task Category
Error 8/15/2012 8:23:17 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 2:45:22 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:52:46 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:52:38 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:52:17 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:48:02 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:27:04 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:22:27 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 8:03:57 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 8:03:35 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 7:52:07 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 7:48:47 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 7:28:40 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 4:47:56 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 3:41:50 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:53:42 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:42:26 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:42:08 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:23:25 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:16:13 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 1:14:33 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 1:33:59 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:48:37 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:45:33 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:41:43 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:39:43 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:31:23 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 8:24:09 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 8:06:13 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 7:38:48 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 7:30:15 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 12:55:59 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 12:16:52 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Level Date and Time Source Event ID Task Category
Error 8/15/2012 12:48:28 PM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."
Error 8/15/2012 12:22:55 PM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."
Error 8/14/2012 2:23:56 PM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."
Error 8/14/2012 1:15:00 PM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."
Error 8/13/2012 1:34:27 PM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."
Error 8/13/2012 11:31:55 AM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."
Error 8/13/2012 8:24:36 AM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."Level Date and Time Source Event ID Task Category
Error 8/15/2012 12:48:28 PM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Error 8/15/2012 12:22:55 PM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Error 8/14/2012 2:23:56 PM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Error 8/14/2012 1:15:00 PM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Error 8/13/2012 1:34:27 PM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Error 8/13/2012 11:31:55 AM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Error 8/13/2012 8:24:36 AM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Level Date and Time Source Event ID Task Category
Error 8/15/2012 8:23:17 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 2:45:22 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 12:52:46 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 12:52:38 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 12:52:17 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 12:48:22 PM Service Control Manager 7024 None The SQL Server (SBSMONITORING) service terminated with service-specific error %%17058.
Error 8/15/2012 12:48:02 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 12:27:04 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 12:25:19 PM Service Control Manager 7024 None The Windows Search service terminated with service-specific error %%-1073473535.
Error 8/15/2012 12:22:48 PM Service Control Manager 7024 None The SQL Server (SBSMONITORING) service terminated with service-specific error %%17058.
Error 8/15/2012 12:22:27 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 8:03:57 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 8:03:35 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 7:52:07 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 7:48:47 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 7:28:40 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 4:47:56 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 3:41:50 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 2:53:42 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 2:42:26 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 2:42:08 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 2:23:25 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 2:16:13 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 1:14:33 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 1:33:59 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 11:48:37 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 11:45:33 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 11:41:43 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 11:39:43 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 11:31:23 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 8:24:09 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 8:06:13 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 7:38:48 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 12:55:59 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 12:16:52 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013. -
Report on DNS and WINS settings
Hi,
It doesn't look like there are built-in reports to show DNS and WINS settings for client machines in SCCM 2012? We are going to run a script to change all clients with static DNS and WINS settings and I need to have a report to show client machines with
and without the new settings. Can anyone help with this?
I have enabled 'DNS Server Search Order', 'WINS Primary Server' and 'WINS Secondary Server' in hardware inventory classes > Network Adapter Configuration (Win32_NetworAdapterConfiguration). I've done this in the Default client settings. There are other
client setting policies with a higher priority but I assume they are cumulative and so as this isn't set on the other client setting policies it should implement this?
Thanks,
AndrewHi,
1. Please make sure the hardware inventory has completed and the data about that hardware incentory has been written into database.
SCCM inventory troubleshooting
2. You could have a look on the query in the thread below.
SCCM custom report on DNS and
WINS information for all Domain Controllers in a collection
(Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
CISCO ASA Enable DNS Lookup Problem
I have Cisco ASA 5510 , from ASA CLI i can not resolved the hostname. ( cisco.com or google.com)
At many form say do this.
1. Whilst in enable mode > enter configure terminal mode, then enable DNS Lookups.
CiscoASA#conf t
CiscoASA(config)# dns domain-lookup Outside
2. Then specify the external DNS Servers (Change IP addresses appropriately).
CiscoASA(config)# dns server-group DefaultDNS
CiscoASA(config-dns-server-group)# name-server 122.122.122.199
CiscoASA(config-dns-server-group)# name-server 122.122.122.198
CiscoASA(config-dns-server-group)# exit
3. Test it by pinging a name/URL.
CiscoASA(config)# ping www.20best.blogspot.com
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 123.123.123.123, timeout is 2 seconds:
But there is no command ( dns server-group ) in my ASA
Please tell me how to do this or any way
My ASA is showing only
ail-ASA# sh runn
: Saved
ASA Version 7.0(8)
hostname Mail-ASA
domain-name rawabiholding.com
enable password QuzxIf5jNzzT5kki encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 172.16.0.94 Test-web-mail
name 172.16.5.63 Mail-server
name 172.16.0.40 Web-Mail
name 172.16.0.24 MX-A
name 172.16.0.93 Test-Mail-MX
name 172.16.1.55 DNS-1
name 172.16.1.17 Web-Server
name 172.16.0.41 Helpdesk.rawabiholding.com
name 172.16.0.98 Test-Server
no dns-guard
interface Ethernet0/0
nameif outside
security-level 10
ip address 82.118.161.34 255.255.255.224
interface Ethernet0/1
nameif LAN
security-level 100
ip address 172.16.1.65 255.255.252.0
interface Ethernet0/2
nameif inside-Mail
security-level 100
ip address 172.16.5.37 255.255.255.0
interface Management0/0
nameif management
security-level 100
ip address 192.168.100.1 255.255.255.0
management-only
banner exec ************* If you are not Rawabi IT Member Please logout ********
banner login ***************** Do not open or login , if you are not allowed *
ftp mode passive
dns domain-lookup outside
dns name-server 212.102.0.82
dns name-server 212.102.0.11
access-list outside_access_in extended permit tcp any host 82.118.161.35 eq pop3
access-list outside_access_in extended permit tcp any host 82.118.161.35 eq smt.http://20best.blogspot.com
Dear Jennifer,
From Router-ISP, I check it is resolving the name to IP
but from ASA 5510 not, it giving error
Jennifer Halim wrote:Doesn't look like the DNS servers that you configured is resolving any DNS requests.I have just tried both DNS server, and it is refusing the DNS:> www.google.comServer: ns3.shabakah.net.saAddress: 212.102.0.82*** ns3.shabakah.net.sa can't find www.google.com: Query refused> www.google.comServer: [212.102.0.11]Address: 212.102.0.11*** [212.102.0.11] can't find www.google.com: Query refused
http://20best.blogspot.com/2011/06/visit-to-grand-canyon-in-10-days.html -
Follow up - DNS (internal domain has same name as external website)
Hi,
I am following up with on previous blog entry about resolving an domain internal name to an external website found here:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/4d97325b-ff3a-4f46-ba6e-dc3f4ff978e1/dns-internal-domain-has-same-name-as-external-website
On October 30, 2014
HayashiTech provided a response suggesting the use of netsh interface portproxy on the DC's to resolve this issue. There has been no feedback to this suggestion and I am very curious what opinions are out there for this suggestion as it appears to be the
best option provided yet.
Thank you in advance as well for all the great guidance I have found provided by Ace and his followers.Interesting question. I've not seen that solution before, but having done a test on my lab setup it certainly seems to work as expected. Eg, using :
netsh interface portproxy add v4tov4 listenport=80 listenaddress=dc1.abc.com connectport=80 connectaddress=www.abc.com
on my DC where I've setup a working external domain name with the www record pointing to the website, and the non-www record pointing to the DC, requests to the non-www address are successfully being redirected to the www address (after confirming it didn't
happen prior to adding the portproxy).
So on the face of it that does look like a workable solution. I haven't used it myself in anger obviously, but the two downsides I can think of immediately to this solution are :
1) This operates as a proxy, so unlike the IIS method that Ace mentioned where it would tell the client to go to the www address instead (so the client connects direct), this method keeps your DC acting as a middle man, eg all communications to that address
go through your DC rather than direct from the client to the website. Depending on what they're doing on the website this may or may not be an issue for you.
2) Since the client is continuing to connect to the DC throughout, if you ever did need the have something on the DC responding to port 80 then you could have issues. That said, according to
https://technet.microsoft.com/en-us/library/cc731068(v=ws.10).aspx the portproxy listenaddress can be a FQDN rather than IP, so that could mitigate any issues there. -
Client dns and internet connection
Hi,
Running 10.5.5 Server with basic DNS for inter clients to access AFP/SMB and Wiki services via Open Directory. IP address is 192.168.1.10
Clients currently receive internet via DHCP from a router and Network preferences autofills DNS and search domains with router address 192.168.1.1 and RP614v4 respectively.
If I add the server IP and search domain, I can't see the server via DNS name unless I reverse the order in the fields (192.168.1.10 and ######.private). However this turns the internet connection to snail pace.
How can I get the DNS to work for both the internal server and internet connection?
Thanks,
Joel.If your DNS server is running correctly, there's no reason why it should resolve any slower than the router. The fact you're mentioning it implies that the delay is significant so I'll guess that your clients are requesting an address from your server, but that's timing out so they're falling back to the router before proceeding.
You should check your DNS server to make sure it's set to be recursive (so it answers queries for non-local domains, too). That way the clients can get all lookups from your server and you should be good to go. -
How to change host name and domain name in installed Cisco Meeting Place Express 2.0?
Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
Thanks in advance!!!
Sincerely yours
Sergey BondarenkoHi
Thanks for your attention for my humble problem.
I have performed Meeting Place Express configuration through the “net” command.
But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
Have you any idea?
A lot of thanks in advance!!
Sincerely yours Sergey Bondarenko
Here I have printed the net configuration output of Cisco meeting Place Express:
[root@cumpxvoice root]# net
This is the MeetingPlace Express network configuration utility.
Up to the point where you save changes, it is safe to hit ^C to get
out at any time, in which case nothing will have changed.
1) List current configuration
2) Configure Ethernet port 1
3) Configure Ethernet port 2
4) Configure service bindings
5) Set host names
6) Set domain name
7) Configure DNS service
8) Configure NTP service
9) Configure routing
10) Done
Select: 1
Primary/audio host name: cumpxvoice
HTTP host name: cumpxvoice
RTMP host name: cumpxweb
Domain name: uclab.com
Service bindings:
Audio: port 1 (eth0)
Web browsing (HTTP): port 1 (eth0)
Web conferencing (RTMP): port 2 (eth1)
Port 1 (device eth0):
IP Address: 10.62.60.116
Network mask: 255.255.255.0
Default gateway: 10.62.60.1
Link setting: autoneg on
Port 2 (device eth1):
IP Address: 10.62.60.117
Network mask: 255.255.255.0
Default gateway: 10.62.60.1
Link setting: autoneg on
Static routes:
Destination Gateway Network mask Port
0.0.0.0 10.62.60.1 0.0.0.0 1
DNS Servers:
10.62.60.115
10.0.1.4 -
How to change the full host and domain name on OS X Leopard...
I recently bought an iMac, and I'm trying to configure it for my network. The question I have is, how can I change the host name and domain name from Skuld.local to skuld.tolharadys.net?
After mucking around with a few searches on Google, I've gotten the domain name to stick since running domainname returns tolharadys.net. Also I can change the hostname as reported by 'hostname' temporarily by running 'hostname skuld.tolharadys.net' in Terminal.app. However, this isn't persistent after reboots. Ideas are welcome.You would need a DNS server on your network configured to answer authoritatively for that particular subdomain.
-
Strange info in "Bypass Proxy Settings for These Hosts and Domains"
For my Mac Mini my Network IP Address always has a self-assigned 169.254 number that I cannot change. Strangely, this same IP number is similar to info that is in the Proxies section (of Network Settings) under "Bypass Proxy Settings for These Hosts and Domains".
No matter what I do, this info (*,local, 169.254/16) appears in my Network Settings in the Proxies section under "Bypass Proxy Settings for These Hosts and Domains". (I tried removing the info and it would cause the "Configure Proxies" selection to default to "Always Use PAC File". Had to go back and retrash all the plist files to have Proxies go back to "Configure Proxies-Manually". Still, the info (*,local, 169.254/16) continues to appear in the "Bypass Proxy Settings for These Hosts and Domains" section and my IP address is always a 169.254 number.)
Comcast cable modem via direct hardwired Ethernet works fine with my other computer, so not the modem. Also, other computer does not have any info in the "Bypass Proxy Settings for These Hosts and Domains" section.
Installed a fresh copy of OS X 11.5 on a new hard drive. Still the same problem.
I posted this issue before but only got one responder and the problem still exists. Any clues? Somebody must know about this stuff. Help please.
ThanksWhen your Mac wakes up, it does not yet have an IP Addresss. It wants to send a request to a Router for an apprpriste IP address to use now. But it needs to have an IP address (like a return address) to receive any messages. So, ... wait for it,
... it (your Mac) makes one up. There are rules that ensure it is a random address, but they always start with 169.254. It is on the same subnet with any low-order 16 bits This is the "self-assigned" range of IP Addresses. This address is only good for talking on a local network segment, for things like asking for a valid IP Address from a DHCP-enabled Router.
In most cases, on most networks, the 169.254 self-assigned IP Address is replaced by a valid Local IP Address such as 192.168.xxx yyy or 10.0.xxx.yyy so quickly that you never even see the 169.254 Address.
If you do see the 169.254 Address, it can be read as "Nobody will talk to me" or "Nobody will give me an IP Address". When you have this IP Address for more than an instant, you should suspect bad cables for Ethernet connections, bad signal strength or interference for wireless, Router configuration problems, or Mac configuration problems.
Mac configuration problems are often solved by using the "Assist Me" button is System Preferences > Network and choosing to set up again.
Another diagnostic is to try using Network Utility and the Ping function, and Ping-ing the address of your Airport base Station, often 192.168.0.1 or 10.0.0.1 or similar. This will tell you if the Router is reachable, or there are cabling/wirelss signal problems.
In this case, proxies are not an issue, and are simply a distraction from the real problems. -
Printing from the Delivery Engine to non CUPS enable printers
Hello,
I have a EBS R12.1.1 customer who has a requirement to either Email or Print AR Invoices. However, they have rejected using BIP the Bursting and Delivery Engine because their printers are not CUPPS enabled and they dont want them to be. So instead they have designed a custom solution which forces the invoice print to run for an individual invoice at a time. Obviously this is now causing them some performance issues.
Is there a workaround that is used to get round the restriction that the delivery engine can only to to CUPS enabled printers?
Thanks
Mark
Edited by: user717274 on Jun 16, 2010 8:46 AM
Edited by: user717274 on Jun 16, 2010 8:46 AMHi,
Assuming you are generating PDF output you can actually print via Delivery Manager directly to printers without a CUPS installation as long as the print itself is enabled for IPP requests.
This is done on the print server itself using Microsoft Internet Information Services (MIIS) and will need to be done by the clients infrastructure team. Once it has been enabled you can navigate to the print server via a web browser using the supported syntax (something like http://<print_host>/.printer - check internet for syntax). You will then see a list of printers enabled for IPP printing on that server. You will be able to click on the printer which will take you to a standard page showing the current printer status. After selecting the printer, make a note of the URL from the print server as you will need this.
You can then use delivery manager to submit a request entering the print server for DeliveryPropertyDefinitions.IPP_HOST and the path to the printer and printer name for DeliveryPropertyDefinitions.IPP_PRINTER_NAME.
You will also need to convert your PDF file to PostScript so that the printer can interpret it. See documentation on using GhostScript (pdf2ps) to do this. Once the conversion utility has been installed on the server you can set DeliveryPropertyDefinitions.IPP_DOCUMENT_FORMAT_POSTSCRIPT and DeliveryPropertyDefinitions.FILTER to the executable on the server which will perform the conversion.
Some of the newer models of printer support PDF natively in which case you won't have to perform the conversion (which can cause a slight shifts in the report layout since the PDF file is actually converted using an algorithm).
One other thing, you won't be able to use the same approach for faxing to IPP enabled devices. In this case you definitely need the CUPS request broker having been through a lot of pain in trying to get it working.
Good luck.
Maybe you are looking for
-
NMH405 Impressions after the first days - and a few beginners type questions
Hi All, After some research I took the plunge and acquired a new NMH405 (I really would have liked the non existing "NMH400" i.e. no drives). I removed the 500GB drive and added two new 1.5TB WD Green Caviar Drives and set it up as Raid-1 After a fe
-
Problem in Weblogic 5.1
When i started my weblogic i got the following error can any one help to resolve this.. C:\weblogic>set PATH=.\bin;C:\PROGRA~1\RATIONAL\RATION~1\NUTCROOT\bin;C:\PROGRA~1\RATIONAL\RATION~1\NUTCROOT\bin\x11;C:\PROGRA~1\RATIONAL\RATION~1\NUTCROOT\mksnt;
-
How would I get a refund for this? Please help would mind if it was a few pound but 69.99 I can't do Thanks
-
EP-PSERV component fails using JSPM
Hey guys, Maybe cuz it's time to go home but I've got this one last component to upgrade for our EP dev system to SP17. It involves the Table WCR_USERSTAT: Conversion currently not possible. Like I said, I've got all the rest of the stack deployed bu
-
Hi. i have a troble with my computer, a virus called "bagle". then i hope to resolve it, but now my pc suite doesn't work.... when i connect my mobile it said to me that no connection are available..(not Irda, not bluetooth, not USB)...i try to didin