CUPS EPL2 driver for Zebra printer - label edge sensing?

Hi
Can anyone help with this?
iMac Intel Leopard 10.5.5
Zebra TLP3842 300dpi label printer with CUPS EPL2 driver
I can print to the printer OK using the CUPS EPL2 driver that comes with Leopard but the printer doesn't appear to be recognising the 'label edge' so the print isn't always centered on the label. I can't find any option within the printer settings for 'continuous', 'black line', 'reflective', etc label edge sensing. Does this driver have such options? Strange thing is I'm sure I've seen it somewhere but can't remember how to get to it.

Update your printer driver, check if the following information helps:
https://bugzilla.mozilla.org/show_bug.cgi?id=324141
You can see the KB and try the workaround here:
http://support.microsoft.com/kb/904805/en-us

Similar Messages

Command to move content left/right in Smartform label for zebra printer

Issue : Command to move print content left/right in Smartform label for zebra printer.
Requirement : If you changed the printer setting top position and left position, Print should start from a specific (X,Y) position.
I am facing an issue while printing a smartfroms in different zebra printer. We had tried all
S_LZPL_SETUP_X (Where X is LH/SPD/MD/PM/FT )
But these command are not working in smartforms.
We had used ZPL II printer command like u2018LH X,Yu2019 and u2018FT,X,Yu2019 in main window as well as in subsequent windows. But that also not working.
Please advice.
dinesh.

Hi,
If you follow notes #750002 and #750772 and use a smartforms and device type LZEB2, then the you cn just adjust the position of the text in the smartform. e.g. Use tab-stops, spaces or adjust the position of the window. There is no need to use ZPL2 commands directly.
Regards,
Aidan

BarTender for Zebra Barcode Label printing using Smartform

HI Experts,
Does anyone know how to use BarTender 7.10 software to create barcode labels for Zebra printer?
I have to include a jpg Logo into the Label using BarTender.
But when I test using the Zebra printer - the logo/picture won't print out.
Any idea?
Thank You.
Best Regards,
CW

Hi There,
I had problems with using Bartender when I tried to print a logo onto my labels, but I contacted a [labelling company |www.iidsolutions.net] who specialise in barcode label printing and the bartender software, they sorted out my problem but then after a chat with them I decided it would be easier to get them to print the labels for me as I had loads of changes and they were quite cheap. See if they can help you. :~)
Good luck.
Dave.

After I upgrade to Lion OS my Lexmark printer mod. x1185 does not work anymore. I need the scan and copy functions, since I have a HP laserjet for printing. Even in the new (sep/08) driver file from apple there is no driver for my printer. Anyone could h

Driver for lexmark x1185 (series 1100) for MAC OS 10.7. Anyone has a solution ?

You should contact Lexmark. They have not released a driver for this printer since 10.3, and they no longer sell it. You could try the Generic PostScript PPD and see if you get limited functionality.
Hope this helps.

Hi I lost my driver for my printer how can I install it in other different computer

Please help! I moved and got lost my driver for my printer every time when I try to get thru in my new computer just can"t is a canon class image mf4450
thanks

Welcome diva!
You can go to this webpage to download the drivers and software for the printer: http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/black_white_laser_multifuncti...

I cannot find a Mac OS 10.7 driver for 7410 printer

I was having a problem connecting to my printer and thought that I would be able to download a driver. Unfortunately, I deleted the one I had assuming it would be easy to find. It just doesn't seem to exist. HELP!

Hi @elbclist,
Welcome to the HP Forums!
I see that you are trying to locate a driver for your HP Officejet 7410 on Mac OS 10.7. I am happy to take a look for you!
As far as I can tell, there is no full feature software and driver for this printer for this Operating System. However you can download the in-OS driver by following this guide, Installing a Mac Printer Driver Using Apple Software Update, or directly through Apple at this website, HP Printer Drivers v3.0 for OS X.
Hope this clears things up for you!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HT3669 ML2010R - still no driver for this printer on Mountain Lion?

SAMSUNG ML2010R - still no driver for this printer on Mountain Lion?
21 Nov 2013.

Check the Samsung web site and you can probably e-mail them to ask if they are planning to write a driver. There is a universal driver from April 2013.
http://www.samsung.com/us/support/owners/product/ML-2010/XAA

SAPSCRIPT CODE FOR ZEBRA PRINTING OF SU

Hi friends,
can anyone send me some sapscript code done on ZEBRA PRINTING . I have to create SU label Print program and oprint layout for LT31 .
THANKS IN ADVANCE .

Hi, you need to install Label Design for mySAP otherwise you will not understand these control codes.
Also you need to read Note 179534 - Label printing with Zebra printers (SAPscript).
This is an exaple sapscript:
/E   PRINT_LABEL
=    ^XA
=    LH0,0,FS^PRC
=    FO53,54A0N,40,59FD5010 Physical Inv./Cycle CountFS
/*   BY2,38,78FT78,128^B3N,N,,Y,N
/(   BY2,38,78FT78,198^B3N,N,,Y,N
/    FFD&IT_ZINVMSEG-MATNR&^FS
=    FO420,159A0N,60,79FD&IT_ZINVMSEG-MATNR&FS
=    FT49,284A0N,38,38FD&C_DESCRIPTION&FS
/*   IF &IT_ZINVMSEG-TAGNO& NE SPACE
=    FT49,340A0N,38,38FDTag Num.: &IT_ZINVMSEG-TAGNO&FS
=    FT488,340A0N,38,38FDDate: &IT_ZINVMSEG-IDATU&FS
/*   ENDIF
=    FT49,401A0N,38,38FDBase Unit: &c_meins&FS
=    FT49,474A0N,38,38FDQty:   &IT_ZINVMSEG-ERFMG&FS
/    ^PQ1,0,1,Y
/    ^XZ

When printing labels for each printed label a blank label comes out of the printer

Hello Experts
We have a CR report which is designed to prints labels for the items using a label printer. After an upgrade that we have last month the settings for this report are missing so the labels were coming out wrong.
Due to this I have had to reconfigure this report and its printing preferences and so far I have managed to make the prints fit in each label. But the problem is that if I try to print 5 copies of a label, the 5 labels come out of the printer just fine, butt after it another 5 blank labels come out of the printer too.
I have tried with all parameters in "Printing preferences", mainly in the "Material" tab but nothing works.
Thanks in advance and regards

Hi,
Please check below SAP note and let me know your feedback:
1043235 - Label/thermal printers are not supported by SAP Business
One
Thanks & Regards,
Nagarajan

Printer driver for Epson printer not found

I have an Epson Stylus Color 860 printer. Epson apparently does not support this printer anymore, at least with Lion. I downloaded a driver from Gutenprint that seemed to do the trick. The only "problem" is that I get this message in the Printer Utility whenever I print.
Is there anything I can do about this? Or should I just leave well enough alone? Like I said. The printer seems to print just fine from both OS X 10.7.1 and 10.6.8.

It sounds like you may have a preference file left over from the Epson Stylus Color 860 printer.
1) Have you followed the directory path, /Library/Printers/Epson/CIOSupport, to see if the plug-in exists.
2) Check for a preference file named for the printer in /Library/Preferences
3) Check for a preference file named for the printer in ~/Library/Preferences
4) Check for an Epson print driver named for the printer in ~/Library/Printers
If you find items in those locations from Epson for the Stylus Color 860 printer, move them to the Trash or a folder on the Desktop. See if the message goes away.
Be careful not to Trash any files related to the Gutenprint driver.

Is the win 8 driver for the printer photosmart D7360 rgb or CMYK?

Hi,
I will be using Lightroom 4.2 (under win 8 64) and will have the monitor and printer (HP Photosmart D7360) calibrated by a colormunki photo.
When the printer profile is generated by colormunki, depening on the actual printer driver, they will be either a RGB or CMYK profile. Apparently, LR 4.2 will only show printer profiles to use if the driver of the printer is RGB . So if it was CMYK, I wouldn't be able to use the profile for printing in LR.
Can anyone please tell me if this printer driver is RGB or CMYK?!
Any help will be greatly appreciated!
Regards,
This question was solved.
View Solution.

The driver expects RGB data. The actual color inks in the printer use CMYK but that is handled by the driver, the applications need to send RGB data to the driver.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Were can i get the driver for Laser printer canon mf 8030 for os 10.8

I can not find the driver for my IMAC on the home page to Canon.
The printer is Canon laser MF 8030 cn. and i use the OS 10.8.2.

Welcome to Apple Support Communities
http://www.canon-europe.com/Support/Consumer_Products/products/Fax__Multifunctio nals/Laser/LaserBase_MF_series/i-SENSYS_MF8030Cn.aspx?DLtcmuri=tcm:13-961785&pag e=1&type=download

Seeking a driver for my printer to run through my Airport Extreme router

Im trying to find a driver for my Lexmark X1100 series printer which would allow me to run the printer through the usb port of my Airport Extreme router. The printer works when plugged directly into the usb port of the computer. I have a Windows 7 Asus computer. Can anyone help me please. I am using the Bonjour printer wizard to set up the router for the printer. Thanks

There is no driver that will allow that, as this printer only works by connecting it to a host computer, not to a network. No printer driver or software is ever installed to the AirPort Extreme for any printer. Printer drivers and print/scan/fax software (if any) must be installed separately to each computer that will be using a printer.

Installation of driver for p2014D printer for both 7.0 and 8.0 operating systems

I can not find a 2014d driver for the duplex printing. All I have found is the 2014 driver.

Hello JN140, and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

I installed 10.5.8 to my IMac 5 and now it won't recognize a driver for my printer which is an HP PSC 1610. I downloaded the software from HP again and it still says it is searching for drivers

I installed 10.5.8 to my IMac 5 and now it won't recognize any drivers for the printer which is an HP PSC 1610. I downloaded the software and driver from HP and it still says it is searching for drivers to install the printer.

May be worth looking here:
Printer & scanner drivers for OS 10.5 and 10.6:
http://support.apple.com/kb/HT3669?viewlocale=en_US

CUPS EPL2 driver for Zebra printer - label edge sensing?

Similar Messages

Maybe you are looking for