Cure for Logic/Cre8 users with sync probs!

i Peeps,
I bought Cre8 last weekend & got the dreaded L8 sync issues with Logic Pro 7.2.1 when used via Melodynebridge. 3.0.1.5
(I'm currently having issues with 3.1.0.9 knocking out my Reason L/R input)
Having read a little further regarding being VST more solid, I used http://www.fxpansion.com/product-auadapter-main.php FXpansions VST > AudioUnit wrapper on the Melodynebridge VST version.
Worked like a charm. Sync issues disapeared & worked as it's supposed to. Seeing as I'm a newbie to Cre8, I haven't pushed the app, so maybe there will still be further issues.
Should also work with 3.1.0.9 if some are having probs.
G5 2.0 Mac OS X (10.4.7)

I don't know the ASR-10, but my feeling is that the count-off is only going to work if you're driving the ASR's sequencer from its own internal clock. This is usually the case when an keyboard's on-board sequencer is set to slave to ext. clock and song position pointer (SPP).

Similar Messages

Same query takes different time for two different users with same privileges

Hi,
Just wanted to know if it is possible for an INSERT query to take different amount of time for two different users for the same volume of data. If so, what could be the reason? I would like to add that we are not executing the query simultaneously. But it is always faster for user1(within 10-20 seconds) and slower for user2(takes around 8-10 minutes).

Show execution plan for each user. I think there is other reasons which you didn't not tell

HT1660 How do i create 3 different libraries for 3 different users to sync to? How do each person sync to their iTunes library's? When we sync now, all three people sync to my library

How to create and sync to 3 different peoples libraries on the same pc?

You can open iTunes while holding the Option Key and "Create new library." You can then name them accordingly. You will need to go to iTunes presences > advanced and uncheck copy files to iTunes library and afterwards drag the iTunes media folder back into the newly created iTunes library.
After all new libraries are created, and the content added to it, you will be able to open iTunes while holding the Option Key down and "Choose Library" and swap between the separate libraries.
A better way maybe to create each user their own account with their own libraries. Either way would work.
Hope that helps!

Email is quarantined for a specific user with a bypass filtering rule in place.

Hello,
I was instructed to post here for my issue by the technicians from the Office365 forum. Here is the thread from that forum. I would prefer to not have to post everything again.
http://community.office365.com/en-us/f/158/p/253629/779602.aspx#779602
Original post text:
I was recently migrated from FOPE to EOP. For the last few weeks one of my users out of 4 is not receiving a daily email from a newsletter. The other three users receive it just fine. Her's is in the quarantine and I have to release
it every morning. I have a bypass rule in for the IP address of the mail server but no change for her. I setup an individual rule for her and this domain but it is still being quarantined. I checked the report of the rule and it is being
used.

Well now the issue has been made worse. My email user did not receive the message in quarantine this morning either. The other 3 people who regularly receive the email received the email this morning.
Also I figured since I got a very fast response in the Office365 forum that I would receive the same treatment here. Is there a number that I need to call to get this issue resolved?

How do i create a separate media library for a different user with the same software and i pod?

i currently have i tunes with my preferred music. my family member has a completely different taste of music. i set up an account name for that family member however we are sharing the software. how do i create a separate library. my library automatically appears under her account?

this support article should help:
How to use multiple iPods, iPads, or iPhones with one computer

Fix for Sony Z2 users with Elements Premiere

I have a new Sony Z2 series laptop and just purchased Adobe Photoshop and Premiere Elements 10. They both installed fine and run with no problems. BUT...if you use the Sony Power Media Dock (PMD) which comes with the Z2 laptop and is used to hook up 3 additional monitors, you will encounter a Windows error message when trying to open a project in Premiere Elements. The error message is generic and says Premiere has encountered an error and will then close. I called Adobe tech support, but after holding for over an hour, I hung up.
Upon doing further research, I found that Sony has released a new video (GPU) driver *unofficially* and is only available for download from the German website via a direct link. I found this info at NotebookReview.com in their Sony forum. I'm providing a link directly to the thread which includes the new driver download link:
Click here to view the thread and download link
After installing this new driver, Premiere works perfectly. Hope this can help out others and hope Adobe will add this to their knowledge base. The Sony Z2 series is a relatively new model, so I'm suspecting this issue to come up more in the future.

Hi pilotbroth,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Are you running a POP3 account? as POP3 only really shows a copy of what is in the inbox, outgoing would only show if say you used Exchange or IMAP4 based accounts.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Constrained Delegation for MBAM Web User with 2003 Domain Level?

Hi,
i installed MBAM 2.5 in our environment and now stopped at the point where i should configure constrained delegation for the mbam web application pool account. I cannot find the delegation Tab in the user properties within Active Directory. Our domain is
(unfortunately) still running Windows Server 2003 Domain Level. Is it maybe related to this? Within my test environment (Domain Level 2012 R2) it is working fine.
Is there any other chance to configure constrained delegation in my situation?
Thanks
Stefan

I found an older MSDN blog post that may help in this situation. It states that the delegation tab does not show up until there is at least one value set in the servicePrincipaName attribute.
Delegation tab in ADUC not available until a SPN is set
Hope this helps,
David
MDOP on the Springboard Series on TechNet

No Soundtrack Pro or ProApp updates for Logic Studio users?

I attempted to download updates for Soundtrack Pro and the ProApp update but was asked for a Final Cut serial number - - whichm as a Logic Studio owner I do not have. So what's up - - are these updates not signifcant for those who purchased and use Logic Studio? Please advise.

You shouldn't need to go to the download page, just run software update and it should show up. Do any OS and Pro App updates first, the STP upgrade won't show up there until you do.

Firmware 7.3.1 info for the few users with bridged N routernetwork.

Just to help those few people who had a similar setup as my bridged network.
I had two different passwords set; one for my main N router and the other for the N bridged router. The 7.3.1 update failed on the bridged router.
The work around was to change both routers to use the same password.
Hope this helps those few people such as I who had used multiple password protection to their N routers.

FWIW I'm not having the problem described - I have an old (G) Airport Express on a BGN (2.4GHz) network served by an Airport Extreme N (previous, single-band model) and a current (N) Airport Express on a 5Ghz N-only network served by a Time Capsule (previous, single band model). All of that stuff has been updated to the latest firmware.
Something I noticed on the N network, and it possibly relates to several of the issues with 5GHz networks and the new firmware on existing routers is this: I have the wireless channel on my 5GHz router set to "automatic". Previously this used Channel 36. Now, after the firmware update, "automatic" has chosen Channel 147. In my case this hasn't made any difference for better or worse for how well or quickly other devices are connecting to the network, BUT I can easily see how being on a completely different frequency after the firmware update might make things work badly for some people, given imprefect transmission, interference, etc.
What happens if you change the frequency for the 5GHz network from "automatic" back to whatever channel it was choosing "automatically" with the previous firmware? I found that pressing Option when clicking on the Channel dropdown in Airport Utility made the channel selection available, and then I could choose a specific channel if I wished. If your connection was working well with channel 36 (for example) previously, maybe try setting it manually to that again?

Multiple UWL for the single user with different Role

Dear SAP Gurs,
We have one critical requirement on the Universal worklist, as a functional requirement like some Approvers will play different roles as approver, needs to track saperately the approver inboxes for the same person.
For Example :
Approver A - is an Purchase Exicutive(Role)
Approver B - Is an Purchase Manager(Role)
Every time Apporver A has to access his approval requests seperately ( Belongs to Approver A) and take action, as well Approver A has to see Approver B's actions items seperatly and take action.
currently we have 4 levels available and single person has to take action on based on the 4 different Approves(Role)
Is there any work around for the abobe requirement.
Thanks in advance,
Vinod
Edited by: Vinod Malagi on Jul 20, 2010 3:33 PM

Hi Karri,
The same requirement i want to tweak in by adding one more column in the UWL by enhancing the BOR.
i have try with below , can you please suggenst can be done by Virtual attributes.
Once data is comming in the UWL i will put 3 custome filters
We need to add a new column in UWL, which is present as a Table SWWORGTASK, in this we have to pass WI_ID and get ORG_OBJ populate it as a column in UWL.
Please suggent how can we impliment this ? do we needs to create virtual ttribute in the BOR from the same.
as we have reffered the below link, we are not able to implimant the same. Kindly suggest.
http://www.erpgenie.com/sap/abap/bor.htm
Thanks in advance
Vinod

Cheap laptop for home sales users with full lock down

Unfortunately (for now) Internet Explorer is the only browser that this application will run in.

I've bought a great little cheap Toshiba C50 to test (£175!) but it's got Windows 8.1 Home (with Bing nonsense) on it which means I can't lock it down with group policies. We're currently testing DeskMan which seems pretty good but it's extra cost (£40) and extra effort so ideally I'd like a cheap laptop with Windows Professional on it and Internet Explorer locked to two websites. Nothing else required.
We're hoping to roll out at least 10 of these.
Any UK based recommendations? Price isn't the main factor but a good business case is.
Cheers.
This topic first appeared in the Spiceworks Community

Data Recovery Tip For Boot Camp Users with Damaged OSX Disk

My iMac suddenly stopped booting (endless gear on white load screen).
It won't target mode. Disk Repair fails. It wont safe boot.
However, it does have a Windows Boot Camp partition.
I was able to use HFSExplorer (a free 3rd party app) to mount my OSX drive inside windows (when it wouldn't mount on my macbook connected by firewire - even though it could see the device). I then saved a load of data I hadn't yet backed up.
This method saved me a lot of stress, so I was hoping it could help someone else out.
BTW I'm about to do a fresh install of OSX as I can't get it to boot.
1. This will not affect my (still functioning) Windows partition, will it?
2. Is there anything else I can try to get it to boot right? There's 3-4 "red" errors on disk repair and it says it can't fix them.

If you are able to access the Mac OS X volume then you should be able to install a fresh Leopard. First I would erase the volume and zero out the data if Disk Utility will do it before the install. What I am afraid will happen is that DU will tell you that it cannot unmount the volume to do the erase. If so, a new version of Leopard may still have issues.
Dah•veed

Urgent: Search for user with 'ß' character failed.

Hi all,
I have problem for searching the user with 'ß' character included in the name of user in Identity Management.
When nothing is specified in the search criteria, then the user is displayed.
When the name of user without 'ß' is given in the search criteria, then also the user is displayed.
But when the name is given with 'ß' in search criteria, the user is not recognized and cannot be displayed.
'ß' is the German Character.
Please help me out, why the user is not recognized with the character 'ß' in the search criteria.
Thanks in Advance.
Regards,
Yogita.

Hi,
You can ofcourse use ß and all other chars in your search.
It makes no sence that you can create users with these chars, but cannot search using them.
I tried to create user with char ß and also could search with this char. So it is only a local problem on your server.
Is your UME connected with LDAP or DB? My UME where I tested is DB.
So dont give up, open an OSS message with SAP for a solution and also update this thread if you find an answer.
Regards,
Praveen Gudapati

Reseeding cache for users with role based security

I have role based security and trying to set up cache by purging all cache and later seeding cache by query. The query would be different for different users. What is the best way to purge all cache and reseed cache for administrator as well as all users. The EPT would purge cache based on updated tables. But how do I next go about reseeding cache for better performance to all the users. Thanks.

I have created an ibot with the following:
General - Normal Priority, Personalized (recipient's data visibility)
Conditional Request - example_report
Schedule - some schedule
Recipients - Me(administrator) and User1
Destinations - Oracle BI Server cache
when the ibot runs 2 cache entries are created (for the 2 recipients).
I have the report (example_report) on the dashboard (1 dashboard, 1 page, 1 report).
After the ibot runs:
When the administrator logs in first, there is a cache hit on the report. Followed by when the User1 logs in there is NO cache hit.
On the other hand when the User1 logs in first, there is a cache hit on the report. Followed by when the administrator logs in there is no cache hit. The query log creates a Query issued to the database instead of cache hit on query.
The User1 has a data level security.
Please let me know where was I making an error in setting the ibot and how to get the cache seeding work for the different users with different role based security.
Thanks for your inputs.

SharePoint Desinger 2013 Workflow canceled automatically for a specific user

Workflow canceled automatically. I have three users KMSLS,KMSCO,KMSQA who triggers the list workflow at different levels.
KMSLS has full control
KMSCO and KMSQA has contribute permission.
KMSLS is able to initiate the workflow and emails are getting sent when a new item is created in the list.
but I am Workflow gets canceled automatically by user KMSCO and KMSQA. I even tried to give full control to these user but getting same error as below. Please help me...
RequestorId: 9cc0cb81-736c-3628-4115-00a1125754b6.
Details: System.ApplicationException: HTTP 401
{"error_description":"The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug>
configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."}
{"x-ms-diagnostics":["3001000;reason=\"There has been an error authenticating the request.\";category=\"invalid_client\""],
"SPRequestGuid":["0293311d-2376-455c-b73b-73d5e2769e0e"],
"request-id":["0293311d-2376-455c-b73b-73d5e2769e0e"],"X-FRAME-OPTIONS":["SAMEORIGIN"],
"SPRequestDuration":["49"],"SPIisLatency":["0"],"Server":["Microsoft-IIS\/8.0"],
"WWW-Authenticate":["Bearer realm=\"b94af3aa-2759-48a2-a325-866271feda63\",
client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]71feda63\"","NTLM"],"X-Powered-By":["ASP.NET"],
"MicrosoftSharePointTeamServices":["15.0.0.4569"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1; RequireReadOnly"],"Date":["Thu, 30 Oct 2014 10:54:29 GMT"]}
at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context)
at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
V.S.

Hi Vikas,
Please check and make sure your User Profile service and User Profile Synchronization service are running, then start a full user profile sync to make sure your users are in user profile service, then check if the workflow is still auto canceled for those
two users with contribute permission.
Here are some similar posts for your reference.
http://anujabhojani.blogspot.in/2013/02/sharepoint-2013-workflow-gets-canceled.html
http://www.sharepointviking.com/system-unauthorizedaccessexception-when-running-sharepoint-2013-workflows/
http://sharepoint.stackexchange.com/questions/90740/workflow-2013-throws-an-error-on-start
Thanks
Daniel Yang
TechNet Community Support

Cure for Logic/Cre8 users with sync probs!

Similar Messages

Maybe you are looking for