Curerency conversion for a Formula in the query designer

Hi
I have a ' Financial Loss Formula' in the report. I want to convert this 'Financial Loss' into USD Currency at query designer level.
Source Currency = SAR
Target Currency = USD
So how can i do the curerency conversion for a Formula in the query designer.
pls let me kow
kumar

Hi,
If you define your query conversion in BW then it is easy to do currency conversion through Bex.What you need to do is use calculated key figure instead formula and do a right click select properties there at the currency translation area you ca select defined currency conversion in BW and your target currency.
/people/rasim.manavoglu/blog/2007/04/30/currency-currency-currency
Regards.

Similar Messages

Creating formula in the Query Designer

Hi,
I have a KF which I have to convert in to different unit in the query ( x/data)
The problem is some of my data in the cube is zero (0) and when I use division, it shows me error (red X) in the query output.( Divide by zero)
Is there any way to skip this division if the data is zero? How can I set my formula in the Query designer?
Thanks
M Kumar.

Hi,
Please use the NDIV() or NOERR() function outside of your expression and it will take care of the division by zero.
See here for details:
http://help.sap.com/saphelp_nw04/helpdata/en/03/17f13a2f160f28e10000000a114084/content.htm
Hope this helps...

Execute button for BEx Analyzer in the Query Designer

Hello,
My current BEx Query Designer 7.1 and we are using Excel 2003. Currently, I can execute query through BEx Web but I am also looking for green check button of BEx Analyzer also. Could you please tell me how can I incorporate/add this BEx Analyzer check box in Query Designer so that I can execute query both in BEx Web as well as BEx Analyzer.
Thanks very much in advance.
Regards,
Md

Hello Hyma/Prasanna,
Thanks for your reply and it's solved my problem.
If I logon BEx Analyzer and open or changed query through it, I can see green check box in Query Designer. Now I can run query both in BEx Analyzer as well as BEx Web.
Regards,
Md

Currency conversion in the query designer level

Hi
Iam calculating the 'Financial Loss' in the Formula in the query designer.And it comes in SAR(Saudi Riyals).
But i want the 'Financial Loss' in USD in the Query Designer. Because i want the USD Financial Loss to be use in some other calculation.
Please let me know how can we do this one in the query designer. I really appreciate for it .
Regards
Kumar

Dear Ravi,
Basically there are 2 ways to do it: routine & query level.
If query level, you need to maintain it first using tcode RRC1, then you use it in your KF in your query. .
Routine level,
You can create new KF in info-provider, then in the update rules routine, you can use this function to convert the currency :
CONVERT_TO_LOCAL_CURRENCY
Hopefully it can help you a lot.
Regards,
Niel
thanks for any points you choose to assign.

Do we can set any scroll option in the query designer?

Hi,
I would like to know is there any setting for scroll option at the query designer level.
This is because if I look at some reports so I could see little ups and down (small up and down arrows) symbol at the column level, and is enabled for only few reports.
Need some input on the same.
Thanks

Hi
I think you are right clicking on KeyFigures Heading, instaed of that can you on any Keyfigure (example KF1 and KF2 etc..). once you done that you will see the following options.
EDIT
COPY    CTRL + C
CUT       CTRL + X
PASTE   CTRL + V
DELETE   DEL
WHERE USED LIST
LEVEL DOWN         CTRL+ >
LEVEL UP     CTRL + <
PROPERTIES   ALT + ENTER
please select the highlighted options on the required key figures, then execute the query.
regards
Pavan

Creating customer formula to be used in the Query Designer

hi,
How can i code a specific formula to be used in the query designer. As an example, i need to calculate dynamically working days between two dates.
i tried to find the corresponding BAdl interface with no success..
Do you have any suggestion ?
Ludovic

Hi..
I have a scenario ... it may help..
The group HR administrator wants a detailed line item report that lists all employee absences in a given period. The report is to show the employee number, the absence start date, together with the end date of the absence and show the number of calendar days the employee was absent.
The good thing about using this technique is that no redesign work is needed from your technical BW team, no ABAP is involved and best of all, it quick and easy.
Solution:
For this example I created an ODS object called Absence that holds basic employee information along with individual absence record data.
Follow the steps below:
     Open the BEx Query Designer and create a new report on your chosen InfoProvider.
              Drag the Employee, Valid from and Valid to characteristics into the Rows section of the screen.
If needed, apply data selection restrictions to the characteristics as pop up
     Right click on the Key Figures structure and select New Formula
     In the new formula window right click on Formula Variable and choose New Variable
     The Variables Wizard will launch and will require you to specify the variable details.
( Click the NEXT button if the Introduction screen appears )
     Enter the variable details on the General Information as shown in pop up
Enter the Variable Name , Description and select Replacement Path in the Processing by field.
Click the Next Button.
     In the Characteristic screen (pop up) select the date characteristic that represents the first date to use in the calculation (From Date).
Click the Next Button.
     The Save Variable screen (pop up) displays a summary of the new variable.
Click on the Finish button to save the variable.
     Repeat steps first four for to create a second variable for the second date to be used in the calculation.
In the example shown, the characteristic 0DATETO is used to create the variable ABSEND (Absence End Date)
Define the Calculation............
            The new calculated key figure will now show in the columns section of the BEx query designer
excute...
with regards,
hari

How to display header title for 0MATERIAL texts in the query output?

Dear Bwers,
I have a requirement where i need to display headers titles for 0MATERIAL texts in the query output. (example "Material description"). Any ideas on how to do this?
Thanks
Raj

Kamal,
Its is as below:
<b>Vendor</b>    <b>Vendor Name</b>
1001 ---            Bright Industries
1002 ---            Glow Industries
I want to display the header title "Vendor Name" as the title in the column instead of displaying the text without any header title.
Thanks
Raj
Message was edited by:
        Raj Singh
Message was edited by:
        Raj Singh

Currency conversion by Calendar month in the query?

Hellow...
Users want DB currencies when executing query at first. And then want to change currency conversion by Calendar month in the query, if navigating by target currency. Tried as created TEST Currency Translation Key. Database currency is different currencies.
Appreciate your help.
Don.

Hi,
Create Currency conversion type using Trans: RRC1.
1.Specify your Exchange rate type.
2.Dynamic Exchange rate type
3.Source curency from data rec.
4.Fixed currency say USD.
5.Select Variable Time reference "Start Month" and Special Info Object - 0calmonth
Secondly In the key figure field to be converted in the query, select properties - select the currency conversion key name .
Thanks,
Nagesh
Sony Singapore

RFCs for the Query Designer

Hello experts,
does anyone know the RFCs which the Query Designer use? (NW04s SP10)
Thanks in advance for your help.
Best Regards,
Marcel

Hi Edwin,
I tried to use this function modules, but it seems that they have bugs, also the transaction rscz, because I copied a query and the copy is different to the original query.
Any suggestions for RFCs for adding characteristics to row, columns and so on?
Thanks in advance!
Best Regards,
Marcel

'Display as hierarchy' in the Query Designer

Hi,
Can anyone highlight some points or importance of 'display as hierarchy' in either rows or columns in the query designer. Also could someone put some thoughts on the 'new structure' in the query designer, is it just that we can create some new selection and new formula from the structure or is there any other explanation for its existence. Any kind of explanation would be greatly appreciated.
Thanks,
Anjali.

Hi Anjali,
display as Hierarchies:
simply enables you to select and use hierarchies for that InfoObject if available.
Structures:
you can create structures with or without keyfigures. Structures give you a great deal of flexibility and consistancy in your reports. Eg. you can create a structure that gives you a drilldown on char selections that are different for each line or column. We use that to "simulate" divisions in a drilldown that we don't have backed up by masterdata.
Also structures enable you to keep reports consistant by using the same global structure eg. for all Contribution margin reports
Hope that helped,
regards,
michael

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

How to hide a single value node hierarchy in the query designer

Hi,
I would like to perform a calculation in the infocube. It concern a count "Nb of different customers" with the following hierarchy : Country / region / City.
This KF would be read at the same time by city, region and country, and certain customers exist in 2 different region, and I have to count them only once by country.
To do this, I added a new record (at the country level when loading infocube) to deduct a number of customers in doubloons.
This line added contain only a country code and the number of cutomers in doubloons (- 23 when I have 23 cutomers in doublons) with revrese sign.
Now, I would like to use this value (-23) to have a right Nb of different customers by country, without showing the not assigned line in the report hierarchy.
How can I hide, in the query designer or the WAD, a single value node from hierarchy (NOT assigned) but take in account the value (-23) at the country level ?
Is there another solution (more simple) to perform this in the infocube ?
For information,
1) The infocube is loaded once per month, and the KF (Nb of different customers" is also performed by month.
2) I can't perform this in the report (performance problem with calculated KF).
thx.

Hi,
the short answer is "you can't", the longer is: The ADF Faces tree component is stamped for better performance. This stamping means that nodes are not rendered as JSF objects but copies of an existing component (just with a changed value). For this reason the nodes don't issue their own query for data and thus cannot be refreshed individually
Frank

Error in while Executing Query in the Query Designer

Hi,
I created info Set based two info object and three Data Store Objects. and join condition is Left Outer Join.
there are Business Partner info object, CRM BP Sales View Info Object and Data Store Objects are BP: Roles (0BP_ROLE),Partner: Industries(0BP_IS),CRM Marketing Attributes for Business Partner(0ATR_DS01)
I given some Selection Parameters while executing query in the Query Designer. in That i given city is selection parameters
and i creted variable for this info object.
it gives the Error Messages
Beim Lesen der Daten sind Fehler aufgetreten. Navigation ist möglich
Der Wert "New Delhi " von Merkmal 0CITY40 enthält an der 10.ten Stelle einen Fehler
it is very urgent , can any one help me regarding this.

Hi Reddy,
The Error message in english is this
While reading the data mistakes have appeared. Navigation is possible
The value " New of Delhi " from sign 0CITY40 contains a mistake at the 10.ten place
and i think you need to run the change run and run the report with out selecting the variable option.and navigate in the report by filtering the report for your requirement.
Try this and let me know.
Thanks,
RK

G/L Account Numbers missing in the Query Designer

Hi Experts
New G/L Account numbers are been added to some items like Rebates & Discounts. These G/L Account Numbers are been seen in the RSA1 and are not present in the Query Designer. So i want to know the procedure to update these G/L Account numbers in the Query Designer, Can you please help me.
G/L Account Numbers in RSA1 = 718 and in Query Designer it is 661 so please guide me to update the rest of the G/L Account nos in the query designer.
Thanking you
Regards
Mrudul.
Edited by: Mrudul Naidu Cherukupalli on Feb 1, 2008 5:23 PM

Yes, the problem is with the extractor
It is not been enhanced because i am working on SAP BW 3.1C and its been implemented in 2004 and since then it is not been used properly.
The Datasource is 0EC_PCA_3 (Enterprice Controlling line items).
Yes i maximized to 1000 records per call and searched for the G/L Account E16411 which i cannot find in the cube.
When i checked the results with R/3 i found the totals are doubled and when divided the Key figure Net of Credit and Debit by 2 i got the some results correctly(Sales Revenue, Sales Revenue of Exports and Sales Revenue of Domestic)
I Checked the Service Marketplace and found the note which should be implemented to rectify the error of duplicating the records,
Can you please help me to update the G/L Accounts in the datasource.
My Development System contains more then 2000 G/L accounts in the cube (query designer).
Thanking you,
Regards
Mrudul.

How to assign current date/time to a formula variable in Query Designer

How do I assign the current date to a formula variable in Query Designer? I need to use current data in a calculation and just need the date the report was run.
Thanks

Hi Philip,
There is an SAP formula variable to supply the current date in a formula. I think it is 0F_ADAY...install it from business content if you cannot see it in the query designer (formula box, under formula variables) and try using it.
Hope this helps...

Curerency conversion for a Formula in the query designer

Similar Messages

Maybe you are looking for