Curios text in one of three computers when displaying the very same mail in Outlook. I run Outlook 2003 under Windows 8.1.1

Curios text in one of three computers when displaying the very same mail in outlook.
I run Outlook 2003 under Windows 8.1.1 in all of my 3 computers. 70% of the mail from the same sender are shown OK in the actual computer and 100% of the very same mail are shown OK in the two other computers. If I forwards an OK received
mail from one of the “100%”, it will be received OK in the “70%” as well. For me the wrong displayed mail shows up as some kind of vector-descriptors (non converted html?). All links in blue are displayed ok and most of the text is readable in an unformatted
way. When it comes to logos etc it’s not readable at all. What to do?
Regards
Björn Söron
[email protected]

Check these out, they fix most issues in Outlook
https://support.microsoft.com/kb/2768648
https://support.microsoft.com/kb/2652320
DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

Similar Messages

I have different music files all over three computers. Everytime I connect my iPod to one of these computers it transfer the music files from that computer but delete the music files that I already have in my iPod. I want all my music in my iPod.

I have different music files in three computers.
Everytime I connect my iPod into one of these computers it transfer the music files from that computer but delete the music files that I already have in my iPod.
I want all my music in my iPod.
What I need to do?
Thanks!

I haven't researched it and I don't claim to know everything about iTunes, but it has always been my understanding that you can only use one computer per iPod, but you can have multiple iPods per computer. From what I understand, this is to prevent illegal sharing and whatnot.

All my iCloud photos are downloading to one of my computers, but only the last month's worth to another. How can I get them all to download to both computers?

All my iCloud photos are downloading to one of my computers, but only the last month's worth to another. How can I get them all to download to both computers?

When you on photo stream you will only get photos from the last 30 days (plus future photos added to your stream). That's because they only remain in iCloud for 30 days.
To get the old photos on your computer, import them using your usb cable, as explained here: iOS: Import personal photos and videos from iOS devices to your computer.

Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version.

Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version. Paragraphs seem to only be dealt with in styles, and the Formatting window for text doesn't seem to have the space after paragraph contrtol that the older Inspector had. What am I missing?

Sorry I did this without looking:
Side panel >Text > Style > Spacing > Turn the triangle > Before Paragraph/After Paragraph/
This is the trouble with the Peeky Boo Contextual Interface that so many wiser heads than mine love to love.
Peter

If I purchase Lion on one of my computers and then reauthorize that same computer later, does that mean Lion is disabled?

If I purchase Lion on one of my computers and then reauthorize that same computer later, does that mean Lion is disabled? The License Agreement seems to indicate that you can actually install it on more than 5 computers under your ownership or control. However, you can only authorize 5 computers at a time. I'm just wondering if you have Lion on a computer, then deauthorize that computer....no more operating system on that computer?

THERE IS NO AUTHORIZATION.
If you used your Apple ID to log into the Mac App Store on 4,332,332 computers it would work. You could technically do that, and none of them would ever be de-authorized.
I would posit that it's likely you would be breaking the license terms in that case, becuase it's unlikely you would OWN that many machines, but technically there is no "authorization" of any sort that would stop you from doing this.
It's OK if you "don't know." I DO KNOW the answer to this question. And I've given it to you.

On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available". When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way,

On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available".
When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way, no error message. Any ideas to solve this, anyone? Would be greatly appreciated.

I tried to update and it keeps telling me to get the Application Manager. And this is what happens
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
#Restart the computer and try the installation again.
#If the installation fails, delete the InProgress registry key:
Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft.
Launch Windows Registry Editor.
(Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
(Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
Delete the InProgress key.
I was not able to find the "InProgress" key.

I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

ABAP Run time error when display the Customs Export declarations

Hi,
I'm receiving ABAP Run time error when display the Customs Exp. Declarations Under SAP Customs Processing -> Customs Processing - Import / Export -> Monitoring.
Error messaging point to Function Module - /SAPSLL/CUHD_LOAD_SELECTION.
While debugging we found that Primary Key of the below structures are not the same
lt_corpar                              type      /sapsll/corpar_t
lt_corpar_ht      type      /sapsll/corpar_k02_ht
Does anyone has the SAP Notes or solution to this issue other than changing the structures manually. I'm not sure about the impact if i change manually
Error message short details
Termination occurred in the ABAP program "/SAPSLL/SAPLCUHD_SELECTION" - in
     "/SAPSLL/CUHD_LOAD_SELECTION".
    The main program was "/SAPSLL/CULO_DISPLAY_CUS_EXP ".
    In the source code you have the termination point in line 144
    of the (Include) program "/SAPSLL/LCUHD_SELECTIONU01".
We are on GTS Release 8.0 and Support Package SAPK-80014INSAPSLL (Support pack level 14).
Regards,
Pradeep Maddi

Hi,
I have implemented SAP Note 1531799, but it hasn't resolved the current issue.
For Our GTS instance, there are 2 Feeder Systems (ECC) attached, but document transfer in one of the system has not been activated. Both having the same partner functions ( We copied the sandbox into 2 different instances for different business Testings and now these 2 instances attached to GTS for testing). These feeder systems have different Logical system names and Logical system groups.
Recently i have implemented SAP Corrections manually for one the issue, Please see below thread for the detail information
Proforma Invoice not transferred to GTS
After implementing the corrections, i have created Pro-forma invoice in ECC system. When i tried to display, i'm facing the ABAP Dump issues.
Error details
Runtime Errors         ITAB_DUPLICATE_KEY
ABAP Program           /SAPSLL/SAPLCUHD_SELECTION
Application Component SLL-LEG
You tried to insert an entry into table "\FUNCTION=/SAPSLL/CUHD_LOAD_SELECTION\DATA=LT_CORPAR_HT". However, updating the unique table key "PRIMARY_KEY" resulted in a duplicate entry. The key concerned may be either the primary key or a secondary key.
Regards,
Pradeep

I have 3 apple Id accounts and put a15 dollar cift card on one of them and i put the wrong e-mail address to it and can not verify by I tunes

I have 3 apple Id counts and put a cift card on one of them, but I puy the wrong e-mail address to it to verify with I tunes? HELP PLEASE!!!!!!

I would contact iTunes:
http://www.apple.com/support/itunes/contact/

When linking the icloud 3.0 software to my 2010 outlook an unepexted error message pops up. Can anyone help?

When linking the icloud 3.0 software to my 2010 outlook an unepexted error message pops up. Can anyone help?

Not sure if you are trying to upgrade iCloud storage to make more room for the upgrade, but that won't help you. If you do not have enough room on your device for the upgrade, then you have to delete some things off of your device. You can also try to do the upgrade via iTunes on the computer you sync with. A direct upgrade does not require as much memory as a Wifi upgrade.
Upgrading iCloud storage only provides more storage for your backups and for your iCloud sync'd items like messages, contacts, etc.
Until the iCloud Drive is fully functional, iCloud will not help you to increase the memory capacity of your device.
And, right now, the iCloud servers may just be overloaded with activity.
Cheers,
GB

Why do my internet filters quit working on one of my three computers when both computers are identical?

I have three computers with identical software, versions of Firefox (18.0.1), and identical in extensions. However for some reason, on just the one computer my content filters (ProCon and Blocksi) are no longer working. They're enabled. I've cleared cache and cookies. I've restarted Firefox 5 times already. I've used Google. All to no avail.
I've disabled all extensions but one the ones that don't work. Still nothing. They work perfectly on the other two. But on this one they just suddenly stop doing their job.
So what do I do? Does this make sense? Is there something on that shouldn't be that I am unaware of?
I have a feeling the answer is something simple that I missed.

I appreciate the response. Funny thing is that all I did was disable a plugin (dunno what the Java plugin does) and it works now. I've re-enabled the plugin and the extensions still work. I'm going to disable it and leave it that way unless my computer complains about it.
This is one of those times I wish I understood coding better to make complete sense of it.

Empty paragrpahs in a textflow cause runtime error when displaying the text

Hello there,
when I create a textflow which has empty ParagraphElements in
it (i.e. a ParagraphElement without any children) I get this
runtime error once I try to display the text in a container:
Error: Error #2175: One or more elements of the content of
the TextBlock has a null ElementFormat.
Is this a bug, or is there a legitimate reason for this
error? If so, I'd like to understand why. In my reasoning an empty
ParagraphElement should just result in the rendering of a newline.
But maybe I'm thinking too much in HTML terms here...
I appreciate any light you can shed on this,
thanks in advance,
Roland
P.S. I'm using the latest build 370

Hey Richard,
thank you very much, and I was indeed already using your
mentioned workaround, I was just wondering whether it was a bug or
something I didn't fully understand :) But now I do, so thanks for
your time.

Firefox has suddenly stopped connecting on one of three user accounts on the same computer. That account still connects with Safari - but not Firefox. A clean-install has not solved the problem. Help?

Three user accounts on the same computer all link to a single copy of Firefox 3.6.8 - but one of them has suddenly lost its ability to use the program. Firefox opens in that account, but it cannot connect to the Internet. 'Done' appears at the lower left of a blank Firefox page [it's set to load a blank page initially], as though a page had finished downloading ... but Firefox does not actually generate any Internet activityx.
Previously, the Firefox connection for this account was smooth and reliable. I haven't added, upgraded or downloaded any new programs, nor made any other computer changes in recent weeks or months.
Puzzlingly - that same account still connects successfully to the Internet via Safari. And the other accounts on the same computer continue to use Firefox with no problem - including a test user-account that I set up today to help troubleshoot the problem. The blockage is restricted solely to Firefox with that one user account.
Following your Support page instructions, I did a clean-install of Firefox 3.6.8, removing both the existing Firefox 3.6.8 and the Library/Application Support/Firefox folder. Going the extra mile, I checked all accounts to be certain that no Firefox folders remained in any of them - then emptied the Trash and restarted before installing a freshly downloaded 3.6.8. But blimey - the blockage still persists for that one user account.
Firefox shows no visible cookies that might influence the connection. [It's set to delete all cookies upon closing anyway.] And I see no obvious instructions in Mac's firewall or any software program to refuse access to Firefox. The computer is stand-alone, not networked. And in any case, Firefox works just fine in the two other user accounts.
Deleting the hobbled user account is not feasible. So what is causing this roadblock? Did I miss a step in the clean-install? How can that account resume using Firefox?
Thanks in advance for your advice.

If files already have been downloaded then remove the files in the updates and updates\0 folder.
You can also delete active-update.xml and possibly updates.xml (stores the update history).
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)

"STORED" Time On Texts With One Hour Earlier Time Wedged Between The Two Eastern Time Stamps.

The middle time stamp would coincide with Central Time, but it is not labeled as such. If that is what it represents, then it shouldn't
be on my texts since eastern Tennessee and Georgia are in the Eastern Time Zone.

budone wrote:
budone,
In the last two days there has been a change in the format of my text messages. Previously, the texts simply had a time stamp given in Eastern Time. NOW, this is followed with the date and AM or PM time, but the time is one hour earlier and NO Time Zone notation given. Then it says, 'Stored' with a time stamp matching the date and time given in the line designated as "Eastern."
Surely, there are others who have experienced this. I hope this clears the explanation up some.

I can't receive my orders, and I waited 30 minutes three times when dialing the support hotline and nobody picks up the phone! FYI I am very annoyed now, and thank you for coming back to me ASAP!

This is the worst ordering experience I ever come across with in my life thursfar!
I've placing an order with two iPad mini (W4*****638), and the first one was delivered to me on Monday, however, the second one never arrives. And Apple has triggered an email asking me to call the support hotline 800908988 to provide the correct address in three days, otherwise the order will be rejected and 15% charges will be applied!
The following things made me really annoyed:
1. Why did it comes in two seperate orders as oppose to one?
2. I phoned the hotlines over three times (within the office hours) and each time waited for more than 30 minutes (before my next meeting starts and I have to cut off the line) with no response! I am not exaggerating!
3. I didn't even receive an unanswered phone call, so I don't know under what grounds that it claims I provided the wrong address (given that the first iPad was delivered successfully). On that front, attitude of the DHL delivery man of the first order was very rude, and if you want to trace back
Please kindly help address, otherwise, please let me know where I can escalate this issue.
Thanks,
Shyvee
<Personal Information Edited by Host>

Not what you want to hear, I know, but this is a user to user forum. No one here has the power to help you.
You can get information about an order you placed on the Apple Online Store through the Order Status page. If you prefer, you can also get order status or make changes by phone at 1-800-692-7753.
You can try calling again and if the person you speak to can't help, ask to speak to a supervisor.

Curios text in one of three computers when displaying the very same mail in Outlook. I run Outlook 2003 under Windows 8.1.1

Similar Messages

Maybe you are looking for