Curious behaviour with MS Access

The Problem is i have an SQL Statement that if executed via jdbc does not provide any results. If i copy the statement from my logfile to Access and execute it there, it works.
Does anyone kow how this can be fixed?
I 'm using jdk 1.3.1_03.
Best regards,
Heinz van Pee

Your description of the problem provides few if any hints to allow anyone to help you out. If you are assuming that this is a bug in Access or the JDBC/ODBC driver, the you will want to contact Microsoft or SUN respectively. If it's possible that the problem is in your code, then you will want to post a sample of the code for others to look at (this is your best option for getting solid help).

Similar Messages

  • Strange repaint behaviour with JList & Keyboard actions

    Hi everyone,
    This is my first post to the forum. You guys have been a great help in the past and I hope to contribute more in the future.
    Anyways, I've encountered some strange repainting behaviour with a JDialog that uses a JList and a JButton. The dialog is fairly straight-forward and basically this is how it works (like an open file dialog - yes I'm implementing my own filechooser of sorts):
    * JList lists a number of simple items that the user can select from.
    * Once a selection is made, an Open button (JButton) is enabled.
    * <ENTER> key is registered (using registerKeyboardAction()) with a JPanel which is used as the main content pane in the dialog.
    * The user can either click on the Open Button or hit the <ENTER> key which then closes the dialog and runs whatever logic that needs to.
    Now, the repaint problem comes in when:
    1. User selects an item.
    2. User hits the <ENTER> button
    3. Dialog closes
    4. User brings the dialog back up. This entails reloading the list by removing all elements from the list and adding new ones back in.
    5. Now... if the user uses the mouse to select an item lower in the list than what was done in step #1, the selection is made, but the JList doesn't repaint to show that the new selection was made.
    I didn't include a code sample because the dialog setup is totally straight-forward and I'm not doing anything trick (I've been doing this kind of thing for years now).
    If I remove the key registration for the <ENTER> key from the dialog, this problem NEVER happens. Has anyone seen anything like this? It's a minor problem since my workaround is to use a ListSelectionListener which manually calls repaint() on the JList inside the valueChanged() method.
    Just curious,
    Huy

    Oh, my bad. I'm actually using a JToggleButton and not a JButton, so the getRootPane().setDefaultButton() doesn't apply because it only takes JButton as an input param. I wonder why it wasn't implemented to take AbstractButton. hmmm.

  • Access to graphical components in AddOn Forms with Indirect Access Licence

    Hi,
    we have been developing an add on whose forms contain SAP Business One graphical components such as Calendar, Choose from list, calculator..
    Our users who have indirect access licence havent' access to the graphical components Calendar and Calculator whereas they have access to choose from list.
    SAP communicated in the fact that Indirect Access Licence doesn't allow user to have access to SAP Business One forms but nothing is mentioned about the graphical components used in Add On forms.
    Moreover the difference of behaviour between Calendar and choose from list is not logic.
    Do you know if SAP intends to fix this problem and allow users with Indirect Access Licence to have access to graphical components in Add On forms ?
    Thank you in advance for your returns

    Thank you for your reply.
    I'm afraid I do not undersand.
    Do we have to develop again the graphical components Calendar and Calculator whereas they are available in the SDK ?
    If yes, how do you do to develop these components ?
    Thank you in advance.

  • Point4D.Multiply inconsistent behaviour with NaN values

    I've noticed some peculiar behaviour with System.Windows.Media.Media3D.Point4d.Mutiply when used with NaN values.
    The following assumes that I expect that 0 * NaN should result in 0. There is an argument against that logic, but that is not the point here.
    I have a 4x4 matrix defined, in the case that it is an Identity matrix and there is a NaN component in the vector, I would like to get some defined vector output where it is possible to calculate the component.
    E.g. (1,2,NaN,4) * (Identity Matrix) = (1,2,NaN,4).
    I was caught out for a while:
    By stepping through using the debugger gives the output I want (1,2,NaN,4).
    But allowing the debug code to run through uninterrupted gives the result (NaN, NaN, Nan, Nan).
    There is a slightly surprising workaround: - using Matrix.IsIdentity seems to trigger the result I want
    If I use the default Matrix constructor instead of a manually created one (normally created elsewhere in code), there is no problem.
    Can anyone explain this inconsistency?
    Simple C# console demo:
    using System;
    using System.Windows.Media.Media3D;
    namespace TestNan
    class Program
    static void Main(string[] args)
    Point4D testPoint = new Point4D(1.0, 2.0, Double.NaN, 4.0);
    Matrix3D testMatrix = new Matrix3D(1.0, 0.0, 0.0, 0.0,
    0.0, 1.0, 0.0, 0.0,
    0.0, 0.0, 1.0, 0.0,
    0.0, 0.0, 0.0, 1.0);
    var testResult1 = Point4D.Multiply(testPoint, testMatrix);
    Console.WriteLine(testResult1.ToString());// NaN,NaN,NaN,NaN
    var b = testMatrix.IsIdentity;
    var testResult2 = Point4D.Multiply(testPoint, testMatrix);
    Console.WriteLine(testResult2.ToString());// 1, 2, NaN, 4
    Console.ReadKey();

    >>Can anyone explain this inconsistency?
    The Matrix3D class has an internal boolean flag that it uses to determine if the matrix is actually an identity matrix and this flag is not set when you create a Matrix3D object using the constructor that takes the 16 double values despite the fact that
    you are actually creating an identity matrix (the flag is then eventually set when you access the IsIdentity property).
    If you use the Matrix3D.Identity static property, the flag will get set to the correct value immediately and the results will be the expected:
    static void Main(string[] args)
    Point4D testPoint = new Point4D(1.0, 2.0, Double.NaN, 4.0);
    Matrix3D testMatrix = Matrix3D.Identity;
    var testResult1 = Point4D.Multiply(testPoint, testMatrix);
    Console.WriteLine(testResult1.ToString());
    var b = testMatrix.IsIdentity;
    var testResult2 = Point4D.Multiply(testPoint, testMatrix);
    Console.WriteLine(testResult2.ToString());// 1, 2, NaN, 4
    Console.ReadKey();
    Hope that helps.
    Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. Please don't post several questions in the same thread.

  • Strange behaviour with Subjective Assessments comments in SSM10 SP10

    Good day community,
    We have strange behaviour with Subjective Assessments comments in SSM10 SP10.
    We have been using this successfully for 3 quarters.
    The scenario is as follows.
    Business users capture Subjective Assessment comments successfully and these can be viewed on the scorecard overview for Q3. This can be printed to PDF successfully as well.
    A few hours later, when the user accesses the Scorecard Overview, the Q3(March 2014) comments are now replaced with the
    Q2(Dec 2013) comments. 
    This has not happened previously. We have recently deployed Internet Explorer (IE) 10 to some of the machines that previously used IE9 or IE8. Could this be a contributing factor?
    This has happened with one database on 2 contexts.  Although the database/scorecard in question has been created on SSM10, we have recently upgraded the rest of the organisation onto SSM10 from SSM7.5 but those are completely separate databases.
    We have not found a pattern yet, but there is only one assigned administrator for this database and she often has 'funny' things happen on her machine. Could it be possible that there's a virus on her machine? Or maybe there's a sequence or combination of steps that she's doing that could cause this? We have not been able to recreate the situation in our developer offices.
    Any ideas on this strange behaviour would be appreciated.
    Regards,
    Natasha

    Hi everyone,
    We have since noticed that if you go into the Administrator > Context Management > and change the "Person Responsible" and then save, once you go back to the Scorecard Overview all the Q3 comments have been overwritten with the Q2 comments.
    This happened on a different machine so it seems there could be a bug in the Administrator.
    Any thoughts on this strange behaviour would be appreciated.
    Regards,

  • Problem with MS Access Files and executable files migrateds

    Hi all.
    We are migrating an old Netware 6.0 server to new SLES 10 SP3 with OES 2 SP2a. I already migrated one volume and in this weekend well migrate the last, and most important, volume to new OES 2 server.
    The problem is about some MS Access databases that are very very used for all users and some executable applications that was writed using fisical path like \\OLDSERVER\VOL\PATH\APP.EXE or some links to libraries, databases, images, etc.
    The old NW 6.0 server will be removed from the tree in 2 or 3 weeks and in this time the two servers will co-exists. I want to know if it is possible redirect NCP requests to OLDSERVER to NEWSERVER without users rewrite all of MS Access and executable applications. Is it possible?
    Tks
    Alan Cota.

    AlanCota wrote:
    >
    > Hi all.
    >
    > We are migrating an old Netware 6.0 server to new SLES 10 SP3 with OES
    > 2 SP2a. I already migrated one volume and in this weekend we´ll migrate
    > the last, and most important, volume to new OES 2 server.
    >
    > The problem is about some MS Access databases that are very very used
    > for all users and some executable applications that was writed using
    > fisical path like \\OLDSERVER\VOL\PATH\APP.EXE or some links to
    > libraries, databases, images, etc.
    >
    > The old NW 6.0 server will be removed from the tree in 2 or 3 weeks and
    > in this time the two servers will co-exists. I want to know if it is
    > possible redirect NCP requests to OLDSERVER to NEWSERVER without users
    > rewrite all of MS Access and executable applications. Is it possible?
    >
    > Tks
    >
    > Alan Cota.
    >
    >
    Have you considered trying to use a dns alias to it. I have not tested with
    MS access specifically but many other apps it works perfectly for. This is
    how I get around those issues. Of course your issue is that you still
    havethe existing server in the tree. How much will there still be on the
    old server. You could rename the old nw server and than update its info in
    dns to resolve this.

  • I have to re-install itunes, how can I get all my songs, apps etc back, with no access to my old itunes??

    Itines was deleted from my computer and I need to re-install it but dont want to lose all my songs, apps etc. How can I get all this back onto itunes with no access to my old itunes??

    Itunes was deleted?  Or your itunes library was deleted?
    If it was just itunes, then your music should still be there.  Just reinstall itunes.
    Otherwise just use your backup copy of your comuter to put everything back.

  • Need help with thinkvantage access connection

    Here a log file with new access connection:
    Connection status:  Disconnected
    Cause:  Driver disconnected while associating.
    Error code:  229378
    Recommended actions:
    Verify that the encryption settings (WEP/TKIP/AES) specified in this profile match those expected by the wireless network.
    Verify that the wireless adapter in your computer has not been restricted from accessing the radio channels being used by the wireless network.
    If the problem persists, contact your network administrator and provide the troubleshooting information below.
    Adapter Details
    Adapter name  11a/b/g Wireless LAN Mini PCI Express Adapter                  
    Adapter type  Wireless LAN                                                   
    Adapter speed  54.0 Mbps                                                      
    Driver/Firmware version  7.6.0.96/ N/A                                                  
    Adapter status  Enabled                                                        
    Connection Status  Disconnected                                                   
    Disable unused cards?  Yes                                                            
    TCP/IP Settings
    DHCP enabled?  Yes                                                            
    Append parent suffixes of the primary DNS suffix?  Yes                                                            
    Register connection's DNS suffix in registration?  Yes                                                            
    Register connection's DNS suffix in DNS registration?  Yes                                                            
    Enable LMHOSTS Lookup?  No                                                             
    NetBIOS setting  "Default"                                                      
    Wireless Settings
    Network name (SSID)  linksys                                                        
    Connection type  Access point                                                   
    Wireless mode  Auto                                                           
    Security encryption  None                                                           
    System Information
    System model  7732CTO                                                        
    BIOS version  7LETB7WW (2.17 )                                               
    Operating system version  Windows Vista,  Service pack 2                                 
    Access connections version  5.31                                                           
    Access Point scan list
    Network name (SSID)              Wireless mode  MAC address                   Signal strength Channel
    linksys                          802.11g        00:1C:10:54:65:B6              24%            11
    Global Settings
    Network
     Allow all users of this system to switch to any existing location profile  -> No
     Allow the wireless LAN radio to be turned off when inactive  -> No
     Allow selection of location profiles with Fn+F5 On Screen Display menu  -> Yes
     Enable autodeletion of unused profiles  -> Yes
    Notifications
     Show ThinkVantage Access Connections status icon in task tray  -> No
     Show wireless status icon in task tray  -> No
     Display the progress indicator window when a profile is being applied  -> Yes
    Preferences
     Enable sound effects  -> Yes
     Do not show balloon tips from the Access Connections system tray icon  -> Yes
     Show WiMAX page as default on Main GUI  -> No
    Automatic location profile switching list
     Include Ethernet connections in automatic switching and prompt me to save Ethernet ports  -> Yes
     When no other connections are available, connect through Wireless WAN or WiMAX  -> No
    Wireless priority list
    Selection    Priority     Location profile name                                            Connection order                 Connection details             
    No                  1     linksys                                                          Wireless LAN                     SSID: linksys                  
    Log File
    Debug Log is enabled
    It didn't happen when I use old version. Can anybody help me?

    Are you getting any error message while connecting to ds..?
    Are you able to go online on wired computer...?
    Are you able to go online on any wireless computer on your network..?
    Open the router setup page and under the wireless tab,Change the Channel width to 20MHz only and Channel to 11-2.462GHz and click on save settings...Under the Advanced Wireless Settings...Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings... 
    Now,check.

  • VM with remote access VPN without split tunneling

    Hello experts,
    I have customers who require to use VM in their laptop. These users also require to VPN to Corporate network  to do their job. However when they do remote VPN to corporate Network (ASA VPN concentrator) from their VM host machine, they loose their access to their VM guest machines. This problem was not happening when they used cisco VPN client which has gone end of life and support as of end of July 31, 2012. In Cisco VPN client (IKEV1) if we set the protocol to udp they had no problem to keep their connectivity to VM machines while connected to corporate with remote access VPN. However this feature does not work in new Cisco VPN client which is called AnyConnect. ( NOTE: I am using IPSEC IKEV2. NO SSL at this time).
    My Question to Experts:
    1. Was the ability to maintain connection to VM guest machines, while connected to VPN without enabling split tunneling a security flaw in the old cisco VPN client?
    2. Is there a way to maintain connectivy to VM machines installed in a computer and still connect to remote access VPN concentrator through host machine? (My question is about AnyConnect client only using IPSEC IKEV2 and I do not want to enable split tunneling)
    Thanks for your help,
    Razi                

    Did you figure this out?

  • SQL Query with MS-Access Database

    Hi,
    I have linked my oracle database with MS-Access via a DB LINK. i can access the data from MS-ACCESS, but i have a problem that when i specify the column name or define a where clause in my query it gives me the error ORA-00904: invalid identfier ..
    This query fetch the data without any problem SELECT * FROM TBLREPORT@M_ACCESS but when i run SELECT EMP_ID FROM TBLREPORT@M_ACCESS it gives me the error i mentioned above. (Column name have No problem or mistake of spelling even CASE)
    also when i try to put where clause in the query it gives me same error SELECT * FROM TBLREPORT@M_ACCESS WHERE EMP_ID = '100' (Error)
    is there any change in SQL query for ACCESS database ??
    any clue
    Regards
    Rehman

    Are column/table names in access case sensitive? Issue
    DESC TBLREPORT@M_ACCESS If column EMP_ID actual name shows up in mixed/lower case, enclose it in double quotes and use the exact case. E.g., if column name shows up as Emp_Id, use:
    SELECT "Emp_Id" FROM TBLREPORT@M_ACCESSSY.

  • I have 2 ipod touches on the same apple id account.  Can I set facertime up on both with different access emails?

    I have 2 ipod touches on the same apple ID/account.  My daughter uses one, and I use the other.  Can I set facetime up on each with different access email addresses (so that we don't get each others calls?)?

    I recommend that you
    Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
      Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    Use the new ID on her iPod but only for:
    Settings>Messages>Send and Receive
    Settings>FaceTime
    Settings>GameCenter
    and Settings>iCloud if you want her to have separate Contacts Calendar and some other things.    
    Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases.

  • How do I move a file with 'no access' permissions?

    I have a file on a computer that I do not have administrator access on. The file's permissions are -r--------, so the system can read the file only and no one else can read or write the file (or execute the file, but it's a text file so that's not really applicable).
    Basically, I'm trying either to change the permissions (remember, I am not the administrator of this computer, so Get Info>Permissions doesn't work, and chmod +r "file" in Terminal doesn't work either) or to move the file to another computer (where I'm the admin) where I can change the permissions.
    Having no access to a file is really annoying, because it can't even be moved, or at least easily. I've tried copying to various folders, airdropping, sharing via iMessage, opening the file in various applications, compressing the enclosing folder, burning it to a disk (I have a MBA so that doesn't work lol), creating an alias, moving it to the trash, and even dragging the file into a rich text file in TextEdit. Of all those things I've tried, the only successful attempt was to drag the file into a TextEdit document, but I got the rtf file onto the other computer and had no idea how to extract the file I had seemingly just copied into the rtf document.
    I also tried copying the enclosing folder (and enclosing folders many layers out) but the copies always failed because I need to be an administrator to copy that single file deep within the folders. I guess it was worth a shot
    Is there some obscure way of moving this file? Or of changing the permissions? Remember I have absolutely zero admin access to this computer (long story).
    Anything you can come up with will help! You don't need the whole backstory to my predicament but basically I'm transferring the system key for the system keychain so I can open the system keychain on the computer with admin access. Thanks!

    Contact the machine's administrator. Only they can change the permissions.

  • I can't read Or write I have been using the iPad With the accessibility icon Is there a video help them teach me how to use it more efficiently

    I cannot read or write I have been using the iPad With the accessibility icon  Is there a video to help teach me To learn how to use this accessibility more efficiently

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • How to configure Time Capsule etc as a local network server with remote access server and for backups

    I'm trying to set up new 3TB Time Capsule as a wireless network server (with remote access) and for backups for use in a small office (of two Macs). We have a late 2011 Intel MBP and a brand new MBA both running 10.8.3. We have two external 1TB hard drives that until now have been attached the MBP for storage and backing up that computer, which up until now was the only machine in use. The MBA is for a new employee and we need to share and work on the same files, both here in the office and ideally remotely too via Back to my Mac. The MBP needs constant access. The MBA only occasional. The TC has 7.6.3 firmware and we've set it up using AirPort Utility 6.2. It is currently attached to the MBP via ethernet and it has internet access via a Sagemcom router attached to TC's WAN port.
    We've managed to set up a wireless network and both have wireless internet access through the TC
    But there are so many issues I don't know where to begin - so I'll start with a description of what we're trying to achieve:
    I planned to use the TC as the main server drive and place all the key folders and files there so that both of us can access them wirelessly and remotely. The MBP would back up to the TC and to one or two of the external hard drives - one being attached to the Mac via USB and the other being attached to the TC's USB port. We would back up the important data on the TC using SuperDuper and copy it to both external USB drives.
    So , first of all, is that a sensible configuration? Should the 'server' be the one of the external hard drives attached to the TC USB port, backed up regularly to the TC using SuperDuper?

    But when you say 'So using USB drive does make sense if you want to use it as a file store', do you mean a USB drive plugged into the TC? I hope that I can attach an external drive to the TC so we can all access and read/write the content wirelessly via the TC network or remotely.
    Yes, USB.. as it prevents the sparsebundle mixing with data files. I guess it does depend on how much data you are talking about.. you can use the TC internal disk if you are careful and setup the sparsebundle with fixed sizes once you create them..
    And to be clear, I wasn't planning on backing up remotely via BTMM - only to access the shared folders on the TC data drive or USB external drive attached to it. I'm assuming that's ok?
    Yes, that is fine. Sorry I got the impression you were going to do backup over internet.
    What is the alternative? Having a Mac Mini that's always on? Do I need OS X Server etc.?
    A mini would be great.. you don't need server edition.. but I would see how the TC goes.. since you have it and it is much lower power consumption device. It is just that its design is not really for file storage.
    One big problem I have is to do with the sharing permissions. For everything on the TC or attached external drive attached to it, it says I have only custom access and every time I try to change permissions it says I don't have the permission to do that. And if I try to change the owner it says my user name is not valid.
    How is the security setup on the TC?
    The security is a bit tricky.. I must admit since I run windows computer in the network, that I simply turn on the guest account to read and write access. For a business setup that might not be adequate  but it allows me full access to all the files.
    If you setup the TC with user accounts then you are in trouble. That makes it very difficult to access, especially if one person already has the file open you may find a second user cannot login. I am not sure as I have avoided the security. IMHO it is meaningless.. since anyone with physical access to the TC can press the reset for one second and has full access.. and can add or change passwords.

  • Problem with file access in other computer in jsp

    I have problem with file accessing in other computer in jsp.
    The follow code
    File folder=new File("Z:"+File.separator+"sharefolder");//Z is a net share driver
    File[] files=folder.listFiles();
    System.out.println("test");
    System.out.println("length="+files.length);
    will throw exception at the second print.
    but it works well in main funtion.
    Is anybody know what is the problem.
    JSP works on windows2003 server,tomcat 5.0.28 JDK1.4 net share folder on windows2000 server

    no error code for this.But when I start tomcat I get the follow error.
    java.lang.IllegalArgumentException: Document base Z:\ does not exist or is not a readable directory
         at org.apache.naming.resources.FileDirContext.setDocBase(FileDirContext.java:138)
         at org.apache.catalina.core.StandardContext.resourcesStart(StandardContext.java:3910)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4138)
         at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
         at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
         at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
         at org.apache.catalina.core.StandardHostDeployer.addChild(StandardHostDeployer.java:903)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:216)
         at org.apache.commons.digester.SetNextRule.end(SetNextRule.java:256)
         at org.apache.commons.digester.Rule.end(Rule.java:276)
         at org.apache.commons.digester.Digester.endElement(Digester.java:1058)
         at org.apache.catalina.util.CatalinaDigester.endElement(CatalinaDigester.java:76)
         at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
         at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
         at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
         at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
         at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
         at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
         at org.apache.commons.digester.Digester.parse(Digester.java:1567)
         at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:488)
         at org.apache.catalina.core.StandardHost.install(StandardHost.java:863)
         at org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:483)
         at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:427)
         at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
         at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
         at org.apache.catalina.core.StandardService.start(StandardService.java:480)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
    Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
    SEVERE: Error in resourceStart()
    Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
    SEVERE: Error getConfigured
    Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
    SEVERE: Context startup failed due to previous errors
    Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
    SEVERE: Exception during cleanup after start failed
    LifecycleException: Container StandardContext[msgstore] has not been started
         at org.apache.catalina.core.StandardContext.stop(StandardContext.java:4466)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4371)
         at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
         at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
         at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
         at org.apache.catalina.core.StandardHostDeployer.addChild(StandardHostDeployer.java:903)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:216)
         at org.apache.commons.digester.SetNextRule.end(SetNextRule.java:256)
         at org.apache.commons.digester.Rule.end(Rule.java:276)
         at org.apache.commons.digester.Digester.endElement(Digester.java:1058)
         at org.apache.catalina.util.CatalinaDigester.endElement(CatalinaDigester.java:76)
         at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
         at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
         at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
         at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
         at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
         at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
         at org.apache.commons.digester.Digester.parse(Digester.java:1567)
         at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:488)
         at org.apache.catalina.core.StandardHost.install(StandardHost.java:863)
         at org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:483)
         at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:427)
         at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
         at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
         at org.apache.catalina.core.StandardService.start(StandardService.java:480)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)

Maybe you are looking for