Curious change in post count...
For the longest time, my "Total Posts" was exactly one number higher than my "Total Posts Online". I understand why this is and that is not what I am asking.
Today, I looked and my "Total Posts" and "Total Posts Online" are dead even.
Did an old post get bumped back into the system somehow?
Hi Phil,
After the last change to new forum software, there was an offset in post count that could be significant to people who had a lot of posts under the previous version. I think my offset was about 230 posts more than I really made. In the last couple of months, they seem to have corrected this as my current post count is more in line with reality. It's possible that, in the process, some newer accounts saw a little correction too.
Similar Messages
-
Post Count not Displaying Correctly
My post count was somewhere over 2000+ posts before the forum change and now it's 1/10th of that at 289... another poster, I see, has over 200,000 which seems rather skewed. If the web developers who did the change can verify the post counts with a simple query of the actual records based off my user account then they'll see the actual record count doesn't match the number showing up for me under a post.
Um... Yeah, thanks for the reassurance Mr. Smarty Pants. I guess I was not clear enough for the non-technical minded among us... Using my own account as an example I was trying to point out that there's still a bug with the way the new forums query the data from the database and it's an easy test to run a query based on the number of actual records that come up for my user account... the physical record count should be 2000+ and not 280.
As well, it's very difficult with this current forum format to tell that I'm not logged into it... I was showing as logged into the general Adobe site as indicated at the very top-left of the site by the 'Welcome Chunick', but apparently I wasn't logged into the forum section which was indicated by a Login/Register line of text just below the black Forums header that was in a light blue which was not only hard to catch, but also not indicative that I need to login to the Forums separately which is new with the new forums. Now it seems pretty clear since I worked it out, but it was a bit confusing at first, to be sure. -
Now that the Forums speed problem is solved for me, I'll ask a question I meant to ask since we changed to the Jive Forums.
My post count was reset to zero when we switched to Jive" Clearspace. Is there a way for the Admins of these Forums to "recover" my real post count since 2002?
I remember, I changed my screen name at that time to ReneG, would it have cause that?Claudio González wrote:
I remember there was a long period during the trial phase in which we were asked to do something (I forgot what) to pass the information from our previous to our new account. Probably, this means that the information is gone for ever by now.
Yes, I remember that too. And I did it (whatever it was); and I remember at the same time I did that thing, I changed my screen name.
I can see if I had changed my email address, I would probably loose the old counts, but I didn't change it. -
Post Count Back - Points Next?
Post Counts, and also Reply Numbers are back. I wonder if "Points" will make an appearance, or if they are gone, along with "Salamis?"
Just curious,
HuntI don't really agree with Claudio (Claudio please don't get offended )
I think points mean quite a bit on the other hand the fact that somebody ask some question one time ago is not that relevant.
Of course combining the date and number of posts does have some meaning but one does see some people (not myself ) who have quite a posts any never answer any body.
I think the points give a competitive element to the forum and encourage people to participate and answer
IN SHORT
A combination of
1) Posts
2) Points
3) Date joined
should keep most people happy
Stars are in my opinion left best in the sky but also wouldn't do any harm as long as there not in place of the 3 above. -
How to change the posting date in UD stock posting for a HU managed item?
Hi,
We are using Handling Unit managed items with QM activation. For a specific HU managed material, we wanted to post the stock on a previous date. We have created PO on a back date and made GR also on a back date. Now the problem is, the system has generated an inspection lot. Now while trying to do UD and stock posting, I do not see the "Doc" tab which we normally see in UD stock posting for normal inspection lots (non-HU managed items) for changing the date.
I don't see any other way to change the posting date for the HU managed item in UD stock posting. Anyone can help please?
Thanks & Regards,
Madhavan Krishnamoorthy.I don't think you can.
Craig -
Unable to change stock posting date at usage decision while inspecting HUs
If we were using materials without WMS it's simple: thereu2019s a button in the screen for stock posting by which we're able to change document date and posting date; but we're using WM and the screen is slightly different: the button I'm referring it's gone!
So, how to change the posting date at posting stock in QA11 when we're using handle units? Some end-user told me that in version 4.7 this was possible. I don't think so ...unless there was something customized at WM IMG...or maybe they were using a USER EXIT to bring a pop-up window for this (I'm starting to believe that this was implemented..). This is the first time I work with HUs, so I don't know how to manage this.
Anyone?
Seba
Edited by: Sebastian Sniezyk on Apr 3, 2009 10:16 AMI solved it in this topic: Changing posting date at usage decision for handle units. How?
-
How to change a posting date of an invoice in background
Hello,
I want to change the posting and invoice dates ( to correct many invoices,)
I use the MIR4 transaction, the batchinput works fine in foreground,
but in background I have the error
Control framework : erreur fatale, destination SAPGUI
due to enjoy transaction.
No OSS notes or BAPI's to solve it.
I am on ECC5 (MySap ERP2004)
any idea ?
Best regards
RFNew transactions based on control framework are not suitable for batch input. Try to find a BAPI or function module to do the same.
-
Unable to create a billing document , have to change the posting date
Dear All,
I have performed the following steps:
1. I have created Customer
2. Created a material.
3. Linked the customer to the material
4. Post initial stock for the material.
5. Create a Sales/Order.
6. Displayed the sales order and recorded the scheduled delivery date.
7. Created the delivery for the sales order.
8. Transfer the stock from the warehouse management
9. And update the order.
While updating the order I selected post goods issue and it would not go ahead because the posting date is not there in the posting period. Where do I change the posting date. I could not find it anywhere. I did not enter the date anywhere.
Thank you,
SandhyaHello Sandhya
Here is how MMPV works.
Lets say I am at the end of the May month 05.31.2009 so lets say period corrresponding to this is 05/2009.
Now if you want to post data in June perios 06/2009 should be opened.
Here is what I will do in MMPV
Enter my company code
Instead of using periods I will use date which will be 06/01/2009 (mm/dd/yy format in my example)
Check radio button check and close period
Click on remaining checkboxes.
Execute
The effect of this will be that the previous periods will be closed and June will be opened.
In your case since no one has opened periods after 2006 so may be you will have to repeat this step for each month until you reach current period if that is the one in which you want to post goods issue.
Thanks
Vikas -
Mass change of posting date/fiscal year in LIV parked invoices
Hi,
We have OSS note 99775 (program ZFSAP2_B) for mass changing posting date and fiscal year for FI parked documents but I can not use this to change posting date for LIV parked invoices.
Did anyone have any idea how to mass change the posting date of LIV invoices? any NOTE or PROGRAM?
I tried to create a BDC using FBV4, which in turn calls MIR4, but system is over writing initial line item amount and qty from PO.
I can read initial invoice line item values and over write again but I dont think this is how I should do.
Please advice.
Thank you all and best Regards
Vijay GoliHi
Thank you very much for your input.I modified the program ZFSAP2_B given by sap and it worked fine for LIV invoices also.
When I used this program in 2007 for FV60 documents the document key was changed without raising the event FIPP.CHANGED. But this year when we changed the posting date the system triggered the CHANGED event and as a result of this event the workflow came to the starting point. We did not make any chages to workflow template during 2007. Any idea what could have casued this event to trigger?
Thanks
Vijay -
Reg Change of posting Date at the time of Incoming Excise Invoice
Hi All ,
Hope all r doing gr8 !!
I have one question relevant to Posting Date of IEI.
If i am doing IEI based on GRPO the system picks up the posting date from GRPO , so is there any way to change that Posting Date to current date without disturbing the Posting Period (Here Period is locked for that month- i.e. previous month).
Looking for your valuable inputs.
Regards,
KashinathHi!
Its not possible. You have to Book IEI on GRPO Date only. You Make your Posting Period to Closing Period and Give Autho to Users who use those period. -
How to change the posting date at the line item level in a sales order
how to change the posting date at the line item level in a sales order
Hi,
I believe the POSTING DATE will appear on the accounting document
In the Accounting document, the posting date will be based on the Billing date.
Please let me know if you need any more details
santosh -
In MIGO , How to restrict the user to change the posting date?
Hi All,
In MIGO , I want the user to restrict from change in posting date i.e. user should not be able to change the posting date. The system should take to-day date only as a posting date.
Thanks in advance.
GPHi,
check this MBCF0005.
EXIT_SAPM07DR_001.
BADI being <b>MB_MIGO_BADI.</b>
<b>Reward points</b>
Regads -
I lost nearly 500 previous postings and my posting count did start at 0 two months ago.
Is this a problem only of my account, or had all discussion members to restart at 0?
Thanks!!
AndreasBut it did work for years, didn't it? There are thousands of Mac forums able to count the posts. If at Apple Discussions they are not able to show the post count, they should simply omit it!"
A large number of problems this time around are caused by the fact that Apple has switched forum software from Web Crossing to Jive. The Jive forum software has a slightly different feature set and some of the features common with Web Crossing are implemented differently. While Web Crossing easily allowed posting cumulative post counts, Jive is set up to display online post counts, so the developers either have to construct a work-around or they have to wait for Jive to add the ability to display cumulative counts.
Custom avatars is another feature that supported by Web Crossing but not by Jive, although Jive has said they expect custom avatars to be added in an upcoming update or upgrade.
While switching to Jive will be beneficial in the long run, the switch has caused short-term problems, and the developers are working on them. Although the new forum was tested before launch, including some users, there was no way they could test it under full load. When the new forum did go live under full load, there were some serious performance issues and these were the issues that the developers concentrated on.
Finally, omitting post counts has been suggested in the past (as well as not displaying or even getting rid of levels), even when the cumulative counts were given and I know of forums that have stopped displaying counts, including some that could display the actual totals. -
BAPI to change the posting data of invoice document
Hello All,
I need a BAPI to change the posting date of the invoice document (Type : RE, Generated from MIRA transaction). Do let me know if you can across a BAPI to do it.
Thanks,
Siva.BAPI_INCOMINGINVOICE_CHANGE
-
How to change the posting periods
HI,
could anyone tell me that how to change the posting periods in SD module
regards,
charyWelcome to the forum
What do you mean by this and where to change ?? Please be clear in your question. Also before posting, please make a search in the forum
[Forum Search |http://forums.sdn.sap.com/search!default.jspa?objID=f246]
thanks
G Lakshmipathi
Maybe you are looking for
-
I am installing OAM in order to test a .Net Application Integration (IPM 10g). I have been working from the install doc for 10.1.4.0.1 and have got to the point of installing WebPass (Chapter 5 of the install doc). I have installed that component and
-
Java.lang.NullPointerException in Parser
Hi, I appreciate any idea that can help me. I'm processing a sql sentence that can retrive 10.000 rows with XSU. I generate xml files with 1000 rows from the resultset and then I transform this xmls into xml files based of Onix Standard. I've nullpoi
-
Why can't I import videos shot with a digital cam?
I have a 270MB .mov file that was shot with a digital camera on my desktop. An unknown error occurs when I try to import it into the iMovie HD app. Help please, Santiago
-
IPad sync and backup in two computers?
I have the first-generation iPad, and I plan to buy the new one in a few weeks. Now, I want to restore the new iPad from a backup and migrate all my data, however, my PC where I synced it no longer functions. I just need to know if there is a way to
-
Why does the charger not charge my battery? I just bought and installed a new battery from Apple (direct) today