Currency amount more than 15 digits

Hi all,
Please suggest how do I enter amounts (Indian Currency)greater than or equal to 15 digits + decimal places in F-02 transaction.It seems to be allowing only 11 digits before decimal point.
Is there a way...
thanks in advance

2) alternatives:
1)convert your amount in a "hard currency" like or $
2) split your amount per abap-report and post it with rfbibl00
A.
Message was edited by:
Andreas Mann

Similar Messages

System is allowing to post the Adv Pmt amount more than the PO Value

Hi Experts,
I am FICO Consultant. I facing one problem regarding Advance Payment. We have a process to for making advance payment with reference to Purchase Order and Purchase Order Line Item. But system is allowing to post the advance payment amount more than the Purchase Order Value. I want to prevent this to happen. The system should not allow to make advance payment more than the Purchase Order value.
Please help me on this issue.
Thanks in Advance and Regards,
Alkesh Mistry

HI
Please create the Advance payment request with PO number using sp gl indicator as F and then make the advance payment using the request.
Regds
Rajiv

IV to post with Tax amount more than base amount

Hi Gurus,
One of our user want to post Invoice, with Tax amount more than Net value of goods.
Net amount of goods is 31.45 NZD, where as Tax amount is 99.43NZD.
Tax code assigned to PO is with 12.5%.
System is not allowing to post tax amount more than 12.5% of base, as tax code is assigned.
Kindly let me know, how we can post IV with more tax amount.
Thanks In advance

Hello
I dont know if tax code is assigned for 12.5 then why does he wanat to post more tax. its not correct.
then also for reason u wnat to post then for posting that invoice go to FTXP and change the tax % in such a way that tax amount will match ur requirement
may be 316% so that the sustem while doing invoice willtake thie % and calculate tax
then again change the tax code % to 12.5
or
IN miro only u have a GL tab, i n that GL tab u can add tax gl account and add the tax amount so that it will come what u want .
if gl tab is not comming then active it in
spro--mm --logistic invioice ver incoming invoiceActivate Direct Posting to G/L Accounts and Material Account
hope this helps
Reward accordingly
Message was edited by:
Umakant Bhangale

Currency amounts greater than or equal to 15 digits and two decimals

Hi,
How do I handle currency amount (Indian Rupees) upto 15 digits and two decimals.
I need to upload the data through BAPI BAPI_ACC_DOC_POST.
But the F-02 transaction supports only 13 digits and two decimals.
how do I go about...
Please suggest..
thanks

This doesn't look like something specific to the API - does this happen with out-of-the-box Designer and Reporter?
If so, this should be asked in a different forum.
Also - the forums aren't an avenue for support. [Service Marketplace|https://service.sap.com] is.
Sincerely,
Ted Ueda

Invoice amount more than PO

Dear experts.
I have created PO and GRN also done, both are correct but in MIRO i am getting more than PO amount.
Please guide how it is picking more amount in MIRO.
For ref pls find the below screen shot.
PO
GRN
MIRO
Thanks in advance.

Hi,
Thank you for valuable reply..
Same material of another PO,
PO-Non deductible tax is 8248.28,
i have got 1 doubt here 2434.28 only picking in MIRO tax rate (CST against c form)(Pls check both screen shot)
MIRO entries of above PO
Non deductible tax is 8248.28 -2434.28 = 5814 (i need, total 8248.28 tax should come in MIRO tax tab that is we are paying to vendor)
May be i have done wrong tax procedure..what could be changes required in the Tax procedure.

Creating query with a criteria(constraint) on amount more than x dollars

Hi experts,
I have an user requirement where I want to see all the transactions for a particular GL account range (expenditures) which were above 5000 dollars. I am using the new GL cube and ods.
How can I define like this query, can we have such a varaible at the intial varaible screen where the user can say everything more than 5000 dollars?
Thank you,

Hi Raj,
In addition to Ravi,
You can also create a variable for the value - in your case its 5000.
To make more dynamic ( may be later in future they want to see results above 6000), you can create variable which the user may fill up during query execution.
You will find the option to create variable just below where you will enter the values in condition.
Assign points if Helps !!
Above feature was available in BW 3.5, now when i checked in BW 7, i dont find this feature, can anyone let me know how to implement above senario in BW 7.0.
Regards,
Naveen Rao Kattela

Is there anyone who can help me to contact the apple customer service? Because i want to know why they are diducted mt credit card more than the amount which is written on there apple store price? They are taken more!

Why the apple store taken more amount more than the amount written on their prices? Is there any one who can help me to contact the apple customer services. Thanks!

Some country's might not include tax in their prices, and if you changed or added your credit card details whilst making the purchase then a small temporary holding charge may also have been placed - in which case that should disappear within a few days (http://support.apple.com/kb/HT3702). Some apps also then allow you to make in-app purchases (though you can disable that via Settings > General > Restrictions)

Tables containing contractors who provide services more than 1000 FC

Can anyone will tell me which tables I have to use to create this report................
Report to identify the contractors who provide services to the company for a amount more than 1000 FC during the 2000 year.

Hi,
You need to work out how to identify a Contractor.
Your contractors need to be setup as Suppliers in Oracle, Suppliers have Classifications (Type) and perhaps your Payables team always use a specific Supplier Type for contractors ... or maybe not!
If they use a Supplier Type to identify contractors then your query might be something like the following (assuming you don't want to consider tax/freight/etc.):
set pages 9999
col vendor_name format a50
select pv.vendor_name, pv.vendor_id, sum(aid.amount)
from ap_invoices_all ai
, ap_invoice_distributions_all aid
, po_vendors pv
where ai.invoice_id = aid.invoice_id
and ai.vendor_id = pv.vendor_id
and pv.vendor_type_lookup_code = '&Contractor'
and aid.accounting_date >= to_date('01-JAN-2003','DD-MON-YYYY')
and aid.accounting_date < to_date('01-JAN-2004','DD-MON-YYYY')
and aid.line_type_lookup_code = 'ITEM'
group by pv.vendor_name, pv.vendor_id
having sum(aid.amount) > 1000;
Running this in Vision Demo 11.5.10.2 with vendor_type_lookup_code = "Contractor" gets:
VENDOR_NAME VENDOR_ID SUM(AID.AMOUNT)
Next Generation Graphix (DBA, Art Wilde) 12 1447238.5
Gareth
Blog: http://garethroberts.blogspot.com

Please allow more than 13 digits in the financial report calculation

Dear SAP development team,
I would like to suggest the financial report programming code or query or what else that is used to generate the financial reports (TB;P&L;BS) could allow the calculation of debit or credit more than 9223372036854. It made me laugh that it is not allowed.
Why I said so ? Here are the reasons:
1. The report data is not stored on a specific table
2. If the report has calculated debit or credit greater than 9223372036854 while report processing is taking place, the report should still be appears but the amount of debit or credit that greater than 9223372036854, please put the zero on the debit or credit.
I expect that we could still use the report either money overflow happened.
John

Hi, Yang
My colleagues came across that problem recently. I advised them to split the transaction and create several transaction instead thereby avoinding using more than 13 digits.
Another way that came to my mind is to create a new currency with excnage rate (say) 1:1000 . And create the transaction using this currency.
Can't say that both solutions are perfect but I am afraid these are only ones.
Konstantin.

More than 13 digits

Hi,
Is there any solution to allow me key in more than 13 digits (without decimal place) for the amount in one transaction? (FTR_CREATE)
Thanks,
Yang

Hi, Yang
My colleagues came across that problem recently. I advised them to split the transaction and create several transaction instead thereby avoinding using more than 13 digits.
Another way that came to my mind is to create a new currency with excnage rate (say) 1:1000 . And create the transaction using this currency.
Can't say that both solutions are perfect but I am afraid these are only ones.
Konstantin.

How to input more than one currency field into the transfer rules?

hi experts,
how to input more than one currency as well as unit fields in transfer rules, when i am giving two currency fields in flatfile the same structure could not able to get in transfer rules ( 0currency).
pl give me the procedure to input more than one currency field.
thanks & regards
venkat

Hi Venkat,
For example - for amount kf - if you have 0currency as ref object and included in transfer rules and for other kf - create a Zcurr object and try to include...hope it works.
Thanks,Ramoji.

How to authorize more than one device on my adobe digital editions Ebook reader

I have a computer, iPhone and iPad, and can't read a downloaded ebook (EPUB) on more than one device at a time. If I try to open the item on my Overdrive account with a device other than the one I originally used when I downloaded the ebokk, it gives me an error code "Fullfill 2004. This license has already been fulfilled by another user". When I contacted Overdrive Media they explained that I need to contact Adobe to authorize my various devices to have access to my Overdrive account which utilizes Adobe digital editions 4.0
Please provide info on how to authorize my additional devises to have access to downloaded e-books on my overdrive account

Please authorize your devices with same credentials in order to read the book across devices.
thanks

Dont allow user to enter more than specified number of digits/chars?

Hello
First case: I have placed a TEXT field on the form. Now i want to put the below validation,
1) User has to enter only numbers (no decimals)
2) Only 10 digits
If not i need to
1) Alert app.alert
2) Make the field either CLEARIng or considering & resetting only the first 10 digits (if user entered more than 10 digits)
2nd case: Same as above, a TEXT field, but, the data is with a DECIMAL notation, the allowed lenghts are as
2 digits as prefix to decimal
2 digits as suffix to decimal position
example, 35.88
Pls. let me knw the Java Script for these 2 cases or do you suggest me PATTERN validation if so, can i CLEAR or reset and if so, pls. let me know under which TAB(Display / Edit / Data) i need to put the PATTERN validation?

Firstly if you are only allowing numbers then the field should be a numeric field not a text field. You can use patterns to allow only whole numbers or to have 2 digits on either side of the decimal.
In regards to the number of digits you can use the len function to determine the length of the data and if it is too long give a message or clear it.

HT3209 I buy movies and applied all my digital downloads to itunes, and now more than half my movies come up saying my computer cant play because its not capable of HD, I never had a problem before this Icloud,I just feel that ive lost hundreds in digital

Ive always loved Itunes, Ive always thought it was the easiest way to build a library, either music, or movies, ebooks or what have you. Now this new "Icloud" comes into the picture and tells me more than half of my digital movies cant be played because my pc isnt HD compatible, I watched every movie i have in my Itunes library before, therfore I am so frustrated, no one seems to have any answers for me, I think most would feel out of hundreds of dollars of digital movies and feel the same way.....I dont buy movies from Itunes but every movie I've ever bought off the shelves at stores that has digital download on it is put in my itunes library. I Dont want to lose/leave itunes as my system of doing things but.......im at a loss, Anyone Help??? The funniest part of all of it is...Next to all the movies says "Purchased" so obviously they are legit and mine.

I am having a similar problem with iTunes 11 on a Windows 7 box. I was able to rent and play HD movies befor "upgrading" to iTunes 11, however now when I try and rent a movie in HD I get the error: "This cannot be played in HD on this computer. You must rent and watch the HD version on an HD-compatible device. Or, you can rent the SD version and watch it on this computer."
Guess i'll be renting movies from XBox from now on.

Payment amount is more than Purchase Order Amount

Dear FI Expert,
We are getting the error "Payment amount is more than Purchase Order
Amount" w hen a single payment through one check is being made against 2
purchase orders.
System is considering only the 1st purchase order and disallowing
payment.
For e.g. 2 Purchase Orders are created w ith 100% DP condition: First
one
for USD 200000 and second one for USD 100000.
2 Dow n Payment requests are created through ME2DP against these 2
Purchase Orders.
At the time of making payment through F-48 by selecting both open items
it takes the reference of only one Purchase Order and generates the
error
"Payment amount is more than Purchase Order Amount."
Please suggest how entry w ill be made in such cases.
Thanks
Kamlesh Jangir

Hi kamlesh,
You are using EHP 4 or higher package. in this case you can use FPDP_CREATE instead of ME2DP.
You can go through Business function LOG_MMFI_P2P
https://websmp109.sap-ag.de/~form/handler?_APP=00200682500000002672&_EVENT=DISPLAY&_SCENARIO=01100035870000000122&_HIER_…
Down Payment and Down Payment Request - Purchasing (MM-PUR) - SAP Library
I hope this will be help full
Regards
Raheem

Currency amount more than 15 digits

Similar Messages

Maybe you are looking for