Currency and Quantity fields in Nested Table

Hallo Experts,
I have created a Interface  with import Sturcture SLS_PRT_COM. This Sturcture have many nested Sturctures. Now I created a Table type ZEBFO with line type VBDPA. VBDPA has many currency and quantity fields such like GEWEI.
Now I have created internal Table of ZEBFO.
Declare the nested Quantity field in the Currency/Quantity Fields section, using the autofiller (the buttons to the right of the field).
Create an adobe form for it and a program and execute it.
Dump
The following syntax error occurred in program "/1BCDWB/SAPLSM00000034 " in
  include "/1BCDWB/LSM00000034F01 " in
line 1769:
"Field "VBDPA-GEWEI" unknown. "."
can somebody help me what shall I do.
Thanks
Best regards
Waseem Rana
Edited by: ranawaseem165 on Feb 17, 2012 9:14 AM

Hi,
When Creating a Structure ,include currency and quantity Fields in the same structure and Refere those as currency and
Quantity Fields.
In the Form when click on Currency/Quantity Fields,they automatically visible and you can add them .
Thanks.
uma

Similar Messages

  • Problem with currency and quantity field

    Hi,
    I have done a couple of BDC and watched that if some currency or quantity field is there and i want to run the BDC the particular currency/quantity field will not populate the value inspite of i have declared the same table field that it refers to in the screen in the internal table.
        But, if i declare a character string in the internal field having same length as the screen field it will populate at run time. Why so?
    Regards
    Sandeep

    Hi,
    Even i have experienced the same problem many a times and use a character string as a work around to solve it.
    I guess one reason for it is for the currency and quantity fields, the actual defined length and the output length are different with output length being 3 or 4 bytes greater than that of actual lenght and also the fact that these fields are always right justified. hence some bytes of the field is getting truncated which the system does not allow and discards the whole value.
    regards,
    Mahesh

  • About Currency and Quantity Fields

    How does the Currency and Quantity fields are set to a field in a Table, created in SE11
    can you please send examples of each
    Thankyou

    hi,
    its same like any other field.
    but one difference :- <i>the reference field is requires.</i>
    <i>why reference field?</i>
    The reference field is used for the output, the output/input format of a currency field depends on the value of its reference field.
    For example if you create a screen using the field KONV-KBETR :
    the reference field is RV61A-AWEI1:
    if you set RV61A-AWEI1 = 3
    the value in KONV-KBETR is beeing shown with 3 decimals
    So you could see 3,000 but this value is automatically stored as 30.00
    if you set RV61A-AWEI1 = 2
    the value in KONV-KBETR is beeing shown with 2 decimals
    All this convertions are automatically made in according to the value setted in reference field.
    You can see this using the statament WRITE with options CURRENCY, try this:
    PARAMETERS P_KBETR LIKE KONV-KBETR.
    WRITE: P_KBETR CURRENCY '3'.
    WRITE: / P_KBETR CURRENCY '2'.
    WRITE: / P_KBETR CURRENCY '1'.
    Hope u gor the idea
    Rgds
    Anver

  • Can u pls tell what r the currency and quantity fields in detail.

    hi to all can u pls teell
    can u pls tell what r the currency and quantity fields in detail.
    what is reference table .and reference fields .why we r giving theese reference table names while creating the currency fields .

    Hi,
    Currency amount fields and quantity fields are numeric fields which each have a currency or unit field assigned to them. The correct interpretation of the values in these fields depends on its currency or unit of measure. Therefore, you can decide whether you want their corresponding currency/unit of measure to be displayed before or after the field, or not at all. Proceed as follows:
    1. Select the field.
    2. Choose one of the options from the window on the lower left (before, No currency field/unit, or after).
    3. Choose Apply.
    For more information check the following link:
    http://help.sap.com/saphelp_nw04/helpdata/en/0b/5da4e42cf511d5b692006094192fe3/frameset.htm
    Following are system variables of currency:
    SY-CCURS
    R/2 - exchange rate and result field for CURRENCY CONVERSION. Not filled in R/3.
    SY-CCURT
    R/2 - table exchange rate for CURRENCY CONVERSION. Not filled in R/3.
    SY-CDATE
    R/2 - exchange rate date for CURRENCY CONVERSION. Not filled in R/3.
    SY-CTABL
    R/2 - exchange rate table for CURRENCY CONVERSION. Not filled in R/3.
    SY-CTYPE
    R/2 - exchange rate type for CURRENCY CONVERSION. Not filled in R/3.
    SY-DCSYS
    Dialog system of the R/2 System. Not filled in R/3.
    SY-WAERS
    Formerly the company code currency after reading a posting segment. Not filled in R/3.
    Regards,
    Bhaskar

  • Handling currency and quantity fields in smartforms

    Hi,
    can i know how to handle currency and quantity fields in smartforms.
    i have to display ZMENG field of VBAP table but it is not getting displayed.
    i have given the details in CURRENCY AND QUANTITY tab in the GLOBAL DEFINITIONS.
    Thanks,
    BJR.

    Hi
    Did u pass that value in the INPUT and OUTPUT parameters where u r calling that field...
    if u have not included that in The Currency/Quant Tab will get an Error Message.....
    and &VBAP-ZMENG& ..in the text
    surya

  • Help for search help and currency and quantity fields

    hi,
    please help me for creating search help and when the currency and quantity fields are used please expalin this with steps as i am a learner..
    regards
    raj.

    Hi Rachu,
    Welcome To SDN
    Help On Search Help
    Go to se11
    Select radio button Search help
    click on create
    and select elementary seacrh help
    selection method---->tablename or viewname
    press f1 in search help exit we will get a FM named as
    F4IF_SHLP_EXIT_EXAMPLE.copy that FM from se37 in to Zprogram.we have a record_tab for copying the view by using this tab we can restrict the values from the view or table.this values are populate into another table .Then ,
    come to se11
    and in our seacrh help we will pass components of the search help
    Source: https://forums.sdn.sap.com/click.jspa?searchID=14985345&messageID=5618016
    Help On Currency and Quantity Fields:
    Whenever you have to maintain fields for currencies and quantites u need to refer them to currency key and quantity key which also have to be present in the table.
    If suppose you are creating a table for Employee. And suppose that fields would be like :
    EMPID -
    employee id
    EMPNAME
    employee name
    DEPARTMENT --- department
    SALARY -- salary ( Data Type u2013 CURR )
    WEIGHT -
    weight of the employee ( Data Type -- QUAN )
    Now the fields SALARY AND WEIGHT fields should refer to currency and quantity keys. So you need to have two more fields like
    CURRKEY --- Data Type ( Cuky )
    Quantity --- Data Type ( Unit )
    Now we have to attach the field Currkey to the field Salary
    And the field Quantity to the field Weight
    So when u create a table you can see a tab Currency / Quantity fields.
    Here You can give the reference table and the reference field against the salary and weight fields.
    Source: https://forums.sdn.sap.com/click.jspa?searchID=14985456&messageID=5692074

  • Currency and quantity field allignment in smartforms

    hi experts
       i am facing problem in smartforms allignment for currency and quantity fields. these fields are not coming exactly on the same line of the other fields with char types. please help me resolving it.
    Moved to Crrect Forum
    Edited by: Vijay Babu Dudla on Apr 6, 2009 4:38 AM

    &wa_vbap-kwmeng(C)&
    adjust with left and right alignment.
    it will definately work.
    what happend? isn't ur problem solved?
    Edited by: MONIKA DHUMAL on Apr 6, 2009 4:38 PM

  • Currency and quantity fields in Smartforms

    Hi Experts,
    How to refer currency and quantity fields , in my form i am using FAKING and NETWR fields,
    in global definitions one tab is there currency and quantity fields  in that  in filed name column what i have to give and reference filed , PLease can u you give some examples, so that i can understand easily...
    Useful answers are awarded.
    Thanks

    The 'Currency/Quant. Fields' tab in the Global definitions allows you to link the field containing a value to the field containing its unit of measure.
    For example, my purchase order has two line items, one is for 6 eggs (which have unit of measure PC) and 2.5 kilogramms of flour (UOM is KG).  When these are written on the output the eggs have no decimal places, the flour has 2 (this is defined in configuration). So;
    Eggs  6    PC
    Flour 2.50 KG
    This happens only if I specify in the 'Currency/Quant. Fields' tab the field that holds my quantity and the reference field that hold the UOM, and specify data type QUAN.  Same concept applies for currency where they have different numbers of decimal places (for example Japanese Yen is always expressed as a whole number with no decimals).
    Regards,
    Nick

  • Currency and Quantity fields problem in FM

    Hi ALL
    <b>Can anyone help me on this. Very Urgent</b>
    I created a FM, in that i used NETPR,MENGE,WEMNG.(CURRENCY , QUANTITY )  fields.
    When i am trying to activate, it is asking for reference fields.
    I don't know how to resolve it...
    Regards
    Prabhakar

    hi,
    pls refer to this thread for use...
    how can create a function module for currency and quantity fields
    Message was edited by: Ganesh Sundarakrishnan

  • Problem in currency and quantity field

    Hi,
    I have done a couple of BDC and watched that if some currency or quantity field is there and i want to run the BDC the particular currency/quantity field will not populate the value inspite of i have declared the same table field that it refers to in the screen in the internal table.
    But, if i declare a character string in the internal field having same length as the screen field it will populate at run time. Why so?
    Regards
    Sandeep

    Hi Sandeep,
    This is a common problem, when carrying out BDC.
    For example, while recording you met with the 2 fields --> MSEG-DMBTR (Curr) and MSEG-MENGE(Quantity).
    Go to SE11 --> MSEG --> Search for DMBTR --> Double click on the Data Element i.e. DMBTR --> Double Click on the domain WERTZ --> You can see under the block Output Characteristics : Output Length = 16.
    While declaring the TYPES Structure, make it CHAR(16).
    Similarly for MENGE --> Data Element : MENGE_D --> Domain : MENGE13 --> Output Length = 17.
    Make it CHAR(17).
    Consider this technique as the Rule-of-Thumb while doing BDC.
    Regards,
    Abir
    Don't forget to award points *

  • Using Currency and Quantity fields in View

    Hi BW Experts,
      I Created a Generic Data Source and tried to include a view in it for Extraction.since my view contains fields of type Currency and Quantity,it is not allowing.
    What can be done for this.If I want to include them for my Extaction process how it can be done.
    Please clarify.

    Hi sapient,
    you must check in the table of your view in Tab Help Value what Currency/Unit field must correspond to your quantity/value fields in view, then you muast insert these fields in your view and DataSource with inserting directly the corresponding table in the view or inserting valu via CMOD.
    Ciao.
    Riccardo.

  • Regarding currency and quantity fields

    i hav to fill one field with the calculated value of currency and the field of type DEC as below
    wa_final_unitprice = currency field/DEC field.
    how to declare that field in data dictionary as i hav to create ztable.
    and i hav to fill another field as
    wa_final_val = (wa_final_unitprice * quantity field)
    how to declare wa_final_val field?
    plz help me in this.

    HI,
    At table level you declare like currency only for that feild-c.
    For Ex: feild-C = feild-A * feild-B.
    But to get the value in the feild-c you need to create a table maintainece generator. In that you write Events. In Table control after save event (02) you need write the code like below.
    feild-C = feild-A * feild-B.
    to go the events, go to se11 maintain feilds and activate.
    Then  go to Utilities -
    > Tabel Maintanence Generator
    now   go to Environment ---> Modification ---> Events
    Many Thanks,
    Raghu.

  • How can create a function module for currency and quantity fields

    hi,
    i want to create a function module with some fields.when i activated it give some errors for 
    netpr,menge,wemng  fields(currency, quantity fields).error is it asks for reference fields. 
    please send me solution for it.
    sreenu.

    Hi Sreenu,
    While creating CURRENCY/QUANTITY fields in the DataBase Table, you have to enter a REFERENCE TABLE and a REFERENCE FIELD to the field.
    For that, after entering the field name and the data type in the correcponding columns, you have to place the cursor on the data type of the required field and click the CURRENCY/QUANTITY FIELDS tab. You will find two columns called REFERENCE TABLE and a REFERENCE FIELD.
    you have to enter a reference table in which a currency/quantity field is used and a reference field which is a currency/quantity field in that table.
    For Example, below is the table details.
    FIELD DATATYPE LENGTH DEC.PLACES REF.TABLE REF.FIELD
    1.SNO     CHAR 5
    2.AMOUNT  CURR 10     2          T001      WAERS
    3.NOS     QUAN 5                 KNA1      /VSO/R_PAL_UL
    Here Field 2(AMOUNT) is a CURR field whose Ref. Table is T001 and Ref. Field is WAERS and Field 3(NOS) is a QUAN field whose Ref. Table is KNA1 and Ref. Field is /VSO/R_PAL_UL.
    Hope this will help you.
    Regards,
    Vaitheeswaran

  • Summing of currency and quantity fields individually

    hi experts
    From Table BSIS fields are BELNR, BUDAT, DMBTR, MENGE required output is quantity and
    currencey fields should be sum at line item level.write a program ?
    regds
    Venky

    select belnr budat DMBTR MENGE FROM BSIS INTO table it_bsis.
    loop at it_bsis.
    AT NEW BUDAT.
    SUM.
    ENDAT.
    ENDLOOP.
    SUM----
    IT WILL AUTOMATICALLY SUMS THE QUANTITY AND CURRENCY , INTEGER FIELDS

  • Possible bug? Nested tables and quantity fields in the nested table.

    Hey guys,
    I have witnessed a weird bug, maybe someone can clarify this for me.
    1. Create a nested table. The inner table contains a quantity field of type DZIEME (FROM VBAP-ZIEME).
    2. Create your interface and just put this table in the import section. Try to activate. It will work.
    3. Create an adobe form for it and a program and execute it. You'll get a short dump saying that VBAP-ZIEME is unknown and that there are errors in the dynamically generated function.
    Second test.
    1. Create a nested table. The outer table contains a quantity field of type DZIEME (FROM VBAP-ZIEME).
    2. Create your interface and just put this table in the import section. Try to activate. It will NOT work.
    You have to make the addition of the quantity fields in Currency/Quantity Fields.
    From this I see that the checker, doesn't look into nested tables for quantity/currency fields and just activates the interface.
    Third test
    1. Create a nested table. The inner table contains a quantity field of type DZIEME (FROM VBAP-ZIEME).
    2. Create your interface:
    2.a. Put this table in the import section.
    2.b. Declare the nested Quantity field in the Currency/Quantity Fields section, using the autofiller (the buttons to the right of the field)
    2.c Try to activate. It will work.
    3. Create an adobe form for it and a program and execute it. You'll get a short dump which for some reason has no info.
    From this, I understand that the Currency/Quantity Fields section may not declare the quantity fields, from nested tables, correctly.
    What do you guys think? What am I doing wrong?
    Thanks,

    @Anne Kathrine P...
    By nested tables I mean creating table types, in the dictionary (se11) then in the interface>Import section adding a parameter X TYPE B_T.
    i.e.
    Structure A
    Table type of structure A, A_T
    Structure B containing a field of table type A
    Table type B of structure B, B_T.
    The issue can be easily solved for Z tables by changing the component type from quantity to decimal type.

Maybe you are looking for

  • ChecksumExceptions in read only mode

    I'm using SleepycatJE 3.3.87 to read from multiple BDBs that are in read-only mode. Recently I've started get ChecksumExceptions after my application runs for awhile. I tried upgrading to 5.0.58 and rebuilt my BDBs, but no luck. The error I am seeing

  • How to export to adhoc query to Excel

    I am trying to export a list of bank account into excel through Adhoc query, when I go to List >> Export >> Spreadsheet, there is only Xml format for me to choose. However, my colleague has the option to choose excel. Is this Windows setting or SAP s

  • Boot Camp ****: HAL.DLL and other problems

    Okay I am really frustrated, so if I come off like a jerk... well, I don't mean to, but my frustration is going to bleed into the tone of this post. Let me ask you not to reply that I have a bad Windows CD. I've been a gosh darn network administrator

  • Unlocked phone turned to Locked after repair

    Hi Can anyone please help me with the below question. I bought a new unlocked nokia lumia 710 from online vendor.  I was using it for about 2 months and suddenly my phone hung.  I reached to nokina support and they advised me to hard boot and several

  • DVDStyler Error

    I'm getting the following error when trying to create the ISO in DVDStyler: Error executing of command: dvdauthor -o "/home/cconover/.dvd/" -x "/home/cconover/.dvd/dvdauthor.xml" I'm not sure how to resolve this. Does DVDStyler keep an error log? Her