Currency appearing in unit of measure

Hello All,
We have a peculiar problem. The bw extraction delta is going into an error because the unit of measure field Ounit is being populated by the currency GBP. I checked table GLPCT there in the main screen it shows GBP however when i double click on the line the unit of measure shows "***"
The issue is whether this is reult of change in customisation of it is plainly an error in data entry
How do i resolve this issue
Thanks
Nelson

Hi,
Need to take help from ABAP consultant.
Change the decimals from 3- 5 also need access key for same.
Regards
Gietesh

Similar Messages

  • Suppress the unit of measure (EA) from appearing on each line of a query.

    Hello and Happy new year.
    How can you suppress the unit of measure (e.g. EA for a material) from appearing on each line of a query output?
    Many thanks.

    Hi Matt,
    You're right, we can use that option. However, as you said, if row/column contains same UoM. My reports are quite complex, they contains different UoM.
    Regards,
    Anzar
    Edited by: Anzar Pradityo on Jan 10, 2008 12:49 PM

  • Units of Measure, Currency Configuration in BI system

    Hi Gurus,
    We are setting up the new BI Development system....My question is how to Configure 'Units of Measure', 'Currency' RSADMIN, etc.
    Gurus Plz let me the procedure to configure these settings!!!
    Thanks in Advance
    -Lakshmi raj

    Hi
    You need to maintain the Table T006 for UOM and at TCODE RSUOM.. But normally all the settings are Transferred from Source system by RSA13--SOURCESYSTEM -- Transfer Global Settings / Transfer Exchange Rates.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3228ef89-0d01-0010-e9bb-d052aa17b439
    Hope it helps
    Edited by: Aduri on Jan 22, 2009 4:46 PM

  • Unit of measurement for materials received and withdrawn

    Hi Experts,
    Base unit of material is KG whereas sales unit is M2 and conversion is maintained between both. Now I am using sale unit (M2) while entering material componenets. Then I am raising PR, PO, GR in project and withdraw the material in sale unit M2. But system updates the report in KG (under purchasing data tab of component). When I get material report, system shows reqmt qty in M2 but received and withdrawn qty in KG. Its confusing and doesn' serve the reporting purpose. Can we do something so that received and withdrawn qty will appear in M2 (sale unit) rather than KG (base unit)?
    Thanks and Regards
    Dinesh Chauhan

    Hi,
    To resolve this issue, you need to maintain the conversion factors. In material master, additional tab, unit of measure tab you need to maintain the conversion factors. Say example I Kg = How much M2. If you maintain this the system will convert automatically all the Kg in to M2, or vice versa you can do. Otherwise you can maintain the conversion factors in the Info Record also for externally procured materials.
    Regards,
    V. Suresh
    Edited by: V.SURESH on Jan 5, 2009 12:19 PM

  • Material Master MATMAS IDOC and base unit of measurement

    Hi
    We are using SAP standard material master IDOC type MATMAS05 to trigger IDOC. Our material master is having base unit of measure as "G". We are not using ISO unit of measurement. But Material master IDOC, segment E1MARM is populating base unit of meaurement (MEINS) as "GRM".
    Any idea why IDOC is picking ISO unit of measurement instead of material master base unit of measurement.
    Any idea how to send base unit of measurememt as "G" instead of "GRM" in DOC segment.
    Thanks
    Nilesh

    There are ISO codes for country keys, currency keys, units of measure and shipping instructions. According to SAP design guidelines, you should use ISO codes for an IDoc if they are available. When you set up the IDoc, the SAP codes have to be replaced by ISO codes.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf

  • Unit of measurement in project system

    Hi Experts,
    Its relevant to PS module. Base unit of material is KG whereas sales unit is M2 and conversion is maintained between both. Now I am using sale unit (M2) while entering material componenets in project. Then I am raising PR, PO, GR in project and withdraw the material in sale unit M2. But system updates the report in KG (under purchasing data tab in project). When I get material report, system shows reqmt qty in M2 but received qty in KG. Its confusing and doesn' serve the reporting purpose. Can we do something so that received and withdrawn qty will appear in M2 (sale unit) rather than KG (base unit)?
    Regards
    Dinesh Chauhan

    Hi,
    You inventory is maintain always in base unit of measure.
    You can maintain different unit in material master like,
    Order unit(Purchasing view) : - For Purchase Order
    Unit of issue(Plant data1) : - For issue material.
    You can see material stock in both unit of measure in MMBE.
    After enter material code you can see material stock, by changing material unit of measure you can also saw material stock in specific unit of measure.
    Maintain Order unit of measure in purchasing view and also active variable active unit( Enter 1 = active) in purchasing view
    Regards,
    Mahesh Wagh

  • Unit of Measure PCE is not an ISO Code

    Hi MDM Experts,
    We experienced problems in transferring the Catalog item to the shopping cart. The following error message appears:
    "Incomplete items in catalog. Only complete items were transferred "
    I checked SLG1 for the OCI error message and found this log:
    "Unit of measure PCE is not an ISO code. Item will not be transferred"
    I checked table CUNI in both the ERP and SRM server and I found out that PCE is indeed an ISO code. How can I resolve this error? The system is saying that PCE is not an ISO code but the table shows that it is. Is this a bug or something?
    Would appreciate your help. Thanks in advance!
    ADP

    It turned out that in ERP and SRM, ST is the ISO code used for UOM piece. The ISO code in the Data Manager was changed to synchronize the three systems.

  • Base unit of measure can not be changed since EAN is already assigned.

    Hi,
    We would like to change the UOM from EA to SET .In order to tag MM # as BOM Header and ZCEN (Serial number profile)but the error massage appears as below print screensystem is not allowing to do so ,throwing following error message:
    "Base unit of measure can not be changed since EAN is already assigned."
    Could you help to resolve the same.
    Thanks,
    Amit

    Hi,
    Thats correct you must be getting Error message M3 341 ,
    EAN international article number is tied with material number in basic data view with EAN Category and seperate number range
    EAN is a standardized unit that uniquely identifies a material relating to a unit of measure or type of packaging.
    The International Article Number (EAN) is assigned by the manufacturer of the material. In this case, the EAN identifies the
    manufacturer uniquely. A company can assign EANs using "in-store" numbering techniques known only to the company.
    If you still want to change UOM you need to first remove the EAN assigned..please explore further if you have internal number range
    for EAN or external ..etc
    Thanks
    Diwakar

  • Unit of Measure TON not defined for language PT ?

    Hi all,
    I'm new to MM and to SAP in general and I have 2 questions for now :
    1. I have a requisition which is set up using unit of measure TON. When I try to create the PO, an error message pops up saying " Unit of measure TON not defined for language PT ". Do you know what does language PT means and why does this error appears? When I try to convert the TON into TNE, the same message pops up : " Unit of measure TNE not defined for language PT ".
    I also can not convert TON into EA...any ideas why?
    2. How can I see the total value of a PO that has many lines ?
    Thank you very much
    Iuliana

    Hi
    Is this error  "" Unidade de medida *** não definida em idioma PT ""
    appearing only when you select Ton, or any other unit.
    pl. clarify.
    I have seen that you get this message when your loging Login language is Portuguese.
    Any how Configuration of units needs to be checked in
    Spro >General setting > check Units of measurements ,
    ( or pl. use Tcode --  Cuni )
    I also can not convert TON into EA...any ideas why?
    can you give me some more inputs, what erro are u getting ?
    2. you can see the total Po. values in Po header details
    under status tab view.
    if my soln is found usefull
    Pl. award me points
    Thanks
    Prasanna kumar .b.a

  • PM Order Operations Default Unit of Measurement

    Halo Experts,
    We have a problem in UOM for PM/CS order operations. We have defined HR as default value of UOM for operations in IMG.
    Business wants to change at the order level to H as UOM and it is manually keyed in and saved. But when we check with the F4 option for Unit of Measure " H" doesnt appear where as HR appears.
    Any restrictions in displaying all the unit of measures. Can anybody clarify why "H" is not appearing on F4 option in the work order operation line items.
    Regards,
    Selva

    Hi Rajesh,
    We are getting the default unit in operation tab and all the config of default values is available but when we execute the F4 option the unit "H" is not appearing where as if we change from HR which is a default unit to H it is getting saved at the operation Tab.
    Hope it is clear now.
    Regards,
    Selva

  • Changing Base Unit Of Measure (Material Master)

    Hi
    1. How to check this? (Any successful changes in material master only took place when there is no open document from SD, PP, MM & FI for that material. )
    2. Base unit of measurement cannot be changed.  The reason being material movement history is there in table - MSEG mainly which otherwise create inconsistency in reporting.  -
    Is this line applicable for current period or previous period in current year or previous period previous year???
    3. There are no existing purchase requisitions, purchase orders, or scheduling agreements for the material. -
    is this means open / pending purchase orders  or the the PO's created in system with respect to material where the GR and IR is already done
    4. You can change the base unit of measure if there is no stock of the material during current and previous period----
    is this means the term " previous preiod" is previous period in the current finacial year   or its applicable for the previous preiod in previous financial year
    5. Post the stock in the previous period to the current period  - -
    how can we do this???
    Vijay

    See this OSS note : especially the last sentence:
    From OSS note 138767
    Within the material master record maintenance, you want to change the base unit of measure (base unit). During the change, the system performs extensive checks in order to avoid inconsistencies in the applications which use the material master.
    In particular, the following checks are performed:
    The base unit must not be defined as an alternative unit of measure for the material
    No International Article Number must be assigned to the base unit
    No proportion/product units must be defined for the material
    No configurable material must be assigned
    The material must not be used as a configurable material
    Stock must neither exist for the previous period nor for the current period
    No physical inventory must be active
    No reservations or dependent requirements must exist for which the deletion indicator is not set
    No planned orders must exist
    No purchase requisitions, purchase orders or scheduling agreements must exist for which the deletion indicator is not set
    No WM transfer requirements, no WM quants or no WM posting change notices must exist
    The material must not be a bill of material
    The material must not be contained in a bill of material
    The material must not be used as a production resource/tool
    The material must not be used in task lists
    No standard cost estimate must exist for the current or future period
    No production orders must exist
    No planned independent requirements must exist
    No run schedule headers must exist
    If the base unit has dimensions, no serial number profile must be assigned
    No sales and distribution documents must exist which have status Not processed or Partially processed.
    Solution
    If necessary, all reasons mentioned above must be eliminated by archiving the objects listed
    1) SAP checks this for you. A new button will appear in MM02 and after you click this button to check the error log, you will see which documents exist.
    2) I have not seen that an existing movement will restrict the change of a BUoM.
    3) No purchase requisitions, purchase orders or scheduling agreements must exist for which the deletion indicator is not set
           it is not caring about GR done or IR done. it telling you that the deletion indicator has to be active. As a deletion indicator can be reset easily, you probably have to archive the documents
    4) the previous period is the period before the current period.
       today we have February, hence the previous period is January.
    5) first make sure your current stock is higher than the stock of the previous period. if it is lower, then you have to create inventory in current period first e.g. with 202 movement with current date.
    Then you issue the previous period stock with 201 movement and previous period date (make sure periods are open in OB52 and MMRV allows posting to previous period).
    Finally you issue the left stock in the current period with 201 and current date.
    Now previous period and current period stock is zero. After the change of the base unit you have to get the stock back into the system
    Edited by: Jürgen L. on Feb 2, 2010 3:58 PM

  • Unit of Measure Calculation in Query

    Hi,
    I have a few calculated keyfigures in my query for example:
    whats happening:
    KEY 1= Standard Price * Qty A = Output in (LBS) Qty unit of measure
    What I want is:
    KEY 1= Standard Price * Qty A = Output in $
    How can i fix that on the query level so that my output is in $
    Thanks
    Edited by: DANIEL GREEN on Jun 12, 2008 2:33 AM

    Hi
    change the target currency and conversion type.
    --- Pravin

  • Units of Measures found in the material master.

    Hi,
    What is significance of different Units of Measures found in the material master.
    Ajay

    Hi,
    Order unit
    Unit of measure in which a material is ordered. It is the default unit in purchasing functions.
    Order price unit
    Unit in which the vendor invoices you. The order price unit is defined in the purchase order or in the purchasing info record. If you have defined an order price unit in the PO, the goods receipt will be recorded in both the order unit and the order price unit.
    Sales unit
    Unit of measure in which a material is sold. It automatically appears as the default in a sales order and can be changed there.
    Unit of issue
    Unit of measure in which a material is issued from the warehouse/stores. You can use this unit of measure in conjunction with goods issues and physical inventory activities.
    Any quantities that you specify in a unit of measure other than the base unit are automatically converted into the base unit by the system. To make this possible, you must enter the ratio for conversions between alternative units and the base unit (the conversion factor) in the material master record. You can enter this information when specifying the alternative unit of measure
    Regards,
    Santosh

  • APO key figures - units of measure

    I am using APO V5.1.
    Via RSA1 I have created a key figure of data type Quantity and unit = 0UNIT.
    I have assigned this key figure to my planning area and planning book.
    The planning area has unit of measure = CAS, and this is the unit of measure shown for my new key figure in interactive planning.
    How can I change the unit of measure for my new key figure to D(ays)?
    Thanks for any advice...

    Datta,
    Thanks for this reply.
    I have followed your advice...
    I have a key figure with data type 'Number'.
    In interactive planning, this key figure is appearing with a blank uom.
    In the planning book design, on the 'key figure attributes' tab, I cannot however make any changes to the key figure attributes including uom, as they are greyed out.
    Any ideas on this?
    Thanks...

  • BEx Query:  Attribute not display Unit of Measure (UOM)

    In a BEx I am trying to create a query that displays attributes to 0EMPLOYEE.  One of the custom attributes is the employee's rate of pay.  We have the hourly rate, nightly rate, etc.  This attribute is a numeric attribute with currency assigned as the Unit of Measure.  I am trying to create a query displaying the pay rates from the attributes of 0EMPLOYEE but remove the unit of measure in the output.  I am aware this can be done on key figures using the NODIM formula.  How can I remove on an attribute?
    Example:  Output is $10.25 UOM.  I want it to display as $10.25.
    Thanks.

    Hi,
    Create a Formula Variable with Replacement Path for this Attribute.
    Use NODIM function for the Formula Variable.
    Let me know if it works according to your requirement.
    Regards,
    Geeta

Maybe you are looking for