Currency config for Custom Infotype
Hi Guru's,
Can any one guide me how to config the currency for Custom infotypes.
Regards,
Reddy
Hello,
If I was to do it and under the exposed conditions I would have to make a batch input report that would create a cut in your infotype from the currency change start date and record - convert all previous record to new currency.
There is a few standard program created back when the euro came into play that you could have a look at so to replicate behavior for your custom infotype. Report is RPUEMU00, you could have a look at subroutines PROCESS_INFOTYPE_TABLES, PROCESS_PA0015, or maybe just custom abap logic will suit you better.
Cheers.
Similar Messages
-
Logical database PNP not retrieving data for custom infotypes.
Hi all,
I am using logical database PNP in a program. I have declared infotypes as follows:
INFOTYPES: 0001, 0002, 0041, 9801, 9840.
The problem is that the logical database is retrieving data for the standard infotypes but not for the custom infotypes. Any explanation as to why data for custom infotypes is not being retireved and how this can be solved will be greatly appreciated.
regards,
Hamzasolved
-
T code for custom infotype in PA
Hi
T code for custom infotype in PA.
Regards
SudhaHi Sudha,
PM01 is the tcode.
Similar questions were already answered in the following threads
ABAP HR : Infotype Enhancement
So please search and then post specific queries.
rgds
gayathri -
How to upload data for custom infotype
Hi Friends
Can we use HR_INFOTYPE_OPERATIONS FM for custom infotype too or is there other way or other Standard FM to upload data for custom infotype starting with 9000..etc.
Points will be there for sure.
Thanks
Meeta & RoopaThanks for quick response.
my qns is can we use Standard FM like HR_INFOTYPE_OPERATIONS for custom infotype too ?
in my requirment input will come from portal form and in background Java Wd is going to use these FM but i have this big doubt can we use these standard FM for uploading data in custom infotype as well or else is there any other way.. but for sure we can't use BDC and LSMW in this requirement .
Thanks Meeta & Roopa -
E-Recruiting : Creation of Search Profile for custom infotypes
Dear experts,
Can anyone let me know if you have created search profiles for custom infotypes in eRecruiting?
The requirement is for the TREX to be able to search for Candidates based on the fields which are defined in this custom infotype. This infotype (9999) is completely custom defined mapped to object NA.
In the IMG,
I don't have to change the search profile type
I created a new Z Information category.
Here, i have to specify an extraction class for this Z Information Category.
Can anyone please tell me what this should be? Can i give it as "CL_HRRCF_CEC_INFOTYPE" ?
Also, can anyone please mention the significance of the table "T77RCF_SPT_INFTY " and how we should be handling the entries here for our custom infotype ? Should we create a custom class to specify here? How should we do this ?
Any inputs & thoughts regarding this will be invaluable.
Needless to say, i created the Z information category with the class CL_HRRCF_CEC_INFOTYPE but when i run the report RCF_RECREATE_SEARCH_PROFILE,It is giving me a lot errors.
Please help.
Regards,
SowmyaSowmya,
To answer your question, Yes, automatic generation of NA for newly hired/created PERNR (P) is because of the integration you have activated between PA and eRecruit via BADI implementations. Look at OSS note 997181 for details on how integration works.
If you dont need integration between PA and eRecruit on PA40 then you may have to tweak the BADI's.
regards
Sridhar Kandisetty -
Hi all,
My requirement is to Create Custom Infotyp 9100 with two new subtypes(9001 & 9002).
Subtype 9002 will pick up relationship data from the subtype of Infotype 0021
IT9801 u2013 Subtype 9001
PERNR EmpNo NUMC 8
ZISNo Serial No NUMC 4
VORNA First Name In Passport CHAR 25
NACHN Last Name In Passport CHAR 25
MIDNM Middle Name In Passport CHAR 40
IT9801 u2013 Subtype 9002
PERNR EmpNo NUMC 8
ZISNo Serial No NUMC 4
VORNA First Name In Passport CHAR 25
NACHN Last Name In Passport CHAR 25
MIDNM Middle Name In Passport CHAR 40
SUBTY Relationship Serial No CHAR 4
The field SUBTY should display as drop down by picking up the subtypes related to Infotype 0021 from the table T591A
Can you please provide ur inputs as this is very urjent requirement .Step by step procedure will be of great help.
Thanks in advance.Transaction to create an infotype is PM01. See online help there.
You have to create the PS structure first (SE11). This structure containms the fields, look at existing infotype for example.
hope it helps. -
Change layout of Adhoc query output list for Custom infotype
Hi All,
The fields in the Infoset query output on a custom infotype are aligned with the fields u2018payment typeu2019 and u2018amountu2019 appearing repeatedly(in columns) as declared in the Infotype and the output will be a long horizontal list.
Instead, the requirement is that the output list should show vertically so that If I choose u2018Payment Typeu2019 and u2018Amountu2019 as output fields, it will show a long vertical list as in the case of a standard infotype (IT0008).
Also, this way enables user to use Payment Type as a selection criteria so as to just pulling the needed payment type. When we use IT0008 in the infoset it works fine but in custom IT it does not work.
Any pointers/suggestions on how we can achieve this would be helpful.Hi yu liang,
You can find vendor list having Vendor No. & without showing total liability for every vendor.
after executing the report,
1.You need to select "change layout (ctrl+F8)",
a small window comes, it has two part -> column content & hidden fields.
then u select "Vendor" from hidden field & move it to column content.
2. at column content there is a column named "Total". u need to remove check for your column name "amount".
now select "copy" button or enter. u will find the req. report.
u can save it also by ur name.
hope its helpful to u.......
plz, reward points as a way of thanks if helpful... -
Problem in creating help input for custom infotype creation
Hi,
I had the task of creating a custom infotype for storing recruitment test result.
I created it using the following structure:
Component ______________Data Element
TEST_TYPE______________ZTEST_TYPE
TEST_DATE
LOCATION
PIC_____________________RFPER
EX_PIC
TEST_RESULT____________ZRESULT_TYPE
STATUS_________________ZSTATUS_TYPE
OTHER_POSITION_________PLANS
Now for the component other_position for the entry help i use is H_T528B with check table T528B. My objective is, when the infotype is accessed through pa30 and user is inputting the entry, when they press F4 on the inputbox for other_position, help search should show the list of all position within the system. But rather than that, the input help display such message:
No values selected
Maintain entries?
Yes No Cancel
When I choose yes, the input help suddenly prompt me to "Choose customizing project" which i believe is from SPRO.
How do I fix this problem so that when I press f4, the help will shows all position within the system.
Thanksnot answered, but found another work around
-
Error for custom infotype in PPOME
Hello Experts,
I have created one custom OM infotype for object position.Now when i am trying to acccess that Infotype in PO13 it is working fine but when i am trying to acccess the custom infotype in PPOME it is giving a dump.
EERROR:
Error in the ABAP program "SAPLRHOMDETAIL_PP01" had to be terminated because it has come accross a statement which cannot be exceuted.
An exception occurred.
The exception, which is assigned to class 'CX_SY_ASSIGn_CAST_UNKNOWN_TYPE', was not caught in procedure "INIT_SUBSCREEN" "(FORM)" nor was it propagagted by raising clause exception.
The reason for the exception is :
The type "" dynamically specified with ASSIGN....CASTING TYPE is unknown.
Please guide me where i am doing mistake.
Thanks in advance.
ShwetaHi Sudha,
PM01 is the tcode.
Similar questions were already answered in the following threads
ABAP HR : Infotype Enhancement
So please search and then post specific queries.
rgds
gayathri -
ALE/IDOC-How to create Change Pointers for Custom Infotype
Hi,
My requirement is to transfer custom OM infotype changes using IDOCs.
But its not creating any change pointers for that infotype.
The message used is a copy of standard message OM_HRMD_A.
Can any one please help me out in this issue.
Thanks,
SarikaHi Sarika,
How did you solve this issue? We are also facing a similar problem, it will be helpful if you could explain how you found out the solution.
Thanks
Anu. -
Description for value help field for custom infotype field
Hi,
I`ve got to include a field in custom infotype. This field has got a value help attached to it. The values to be displayed in the value help are stored in the domain of the field(in the dictionary).
The requirement is that once I select a value from the F4 help, the description for that value should be fetched and be dispalyed on the screen.
I`m using the FM "<b>AM_READ_TEXT_ON_DOMAIN_VALUE</b>" to read the description from the domain ,but unable to make it display it on the screen.
Can anyone suggest me as what should I do for displaying the description in the custom infotype screen.
Regards,
FarhanaHi anji,
While using the "GET_DOMAIN_VALUES", I do get all the values from the domain. But I want only description to be displayed when I select a Value for that field.Kindly help out..
Eg:
1-Individual
2-Family
Then the description should be displayed as Family when I select the value 2 from the value help.
Regards,
Farhana. -
Custom Subtype table for custom Infotype
Hi,
How can I have a customer table Z* as subtype for an infotype? In PM01 I can set a Z table and field in infotype settings, but an error occurs when genarating my infotype.
I would like someting similar to IT 2006 in my custom infotype where I would have a specific Z table as subtype (not a generic one like t591a) so that new entries in that Z table appears as new subtype options.
Thanks and regrads.
Sérgio.Hi,
The Subtype Table doesn't contain the Subtype Field.
For Example: PM01 for IT 2006 has Subtype Table T556A, Subtype Field KTART (which is not part of T556A).
KTART is a field in the IT2006 Structure itself.
Subtype Table is used just for the Values of the subtypes, Texts, Time Constraints and Object IDs.
Can you mention what the Structure of Z table is, and what the Subtype Field is.
Thanks,
Suryakiran D. -
Time constraint 'T' for custom infotype
HI experts,
Im creating a custom infotype and i want to assign time constraint 'T' for that infotype. But while assigning the time constraint in Infotype characteristcs in PM01, it throws the below error message.
"TIme constraint T is not allowed for 9021 infotype".
Pls tell me what is the pbm here and how to solve the problem?Hi,
Try this.
If a subtype needs to be maintained for the Infotype then some additional steps also needs to be performed
before providing Infotype characteristics
1. Select the Technical attributes from the initial screen of PM01 transaction .You will see a list of RP_XXXX where XXXX is infotype.
2. Select the change button on application tool bar. The dialog module in the above screen then becomes
editable.
3. Select the Infotype 9021 and select the details button. Make sure you are in change mode.
4. Provide the Subtype field of the Infotype, Subtype table as T591A and Subty.text table as T591S.
5. Save and go back to the initial PM01 screen.
6. The subtypes for an Infotype can be entered via the maintenance view V_T591A.
Now try maintaining time constraint T with view V_T582A through SM31.
cheers
Ajay -
We have a custom Infotype 9001.
I need to do some validations for this Infotype.How do I find a user-exit for this.
We are on ECC6.0.
Thanks
KiranHi,
I have the same requirement. Can you please help me out. How to find user exit or badi or Enhancement Spot for the custom infotype.
Thanks & Regards,
Prabu -
F1 help for customized infotype label
Dear expert,
I have a customized infotype and I would like to add the hep text for each label.
But when I press F1 inside the customized infotype, it always said "No documentation available", but this works fine for the standard infotype.
Could you please let me know how to create the help for it?
Best Regards,
WFHi William,
While on the field in PA30, press F1 - Technical information and note down the data element of field -the field should be assigned to a data element-.
Then go to SE11 for that specific data element. Press "documentation" button and create the documentation within text document.
Do not forget to activate the documentation.
Regards,
Dilek
Maybe you are looking for
-
Migrating from 10g to 11g checklist
Hi, we are migrating from oracle 10.2.0.4.0 to 11g. we have Apex 3.1.2.00.02 installed in 10g.Will migrating to 11g will have any issues in our applications?.i have read that what comes with 11g is apex 3.0. it would be so helpful if you could give a
-
Should I buy MacBook Air?
Today I bought 4th generation Ipad. When looking for it I saw MacBook Air and I think it's awesome. Should I buy it or will it be unnecessary expenditure? I want to buy the model with 11.6", 2gb ram, i5, 1.60ghz, 64 gb, 256 mb graphics card. I just w
-
Missing library after 10.1 update
I just ran the suggested update to 10.1. Right after it installed and opened I noticed my entire library was missing in itunes (music, apps, movies, etc). The only things that was there was a few albums I had purchased directly from iTunes. I checked
-
Photoshop ELements 11.. Need help
I have currently purchased and loaded Photoshop ELements 11 on my computer. I have uploaded pics from my camera but now it is telling me "searching for missing file" ?? I'm confused ... Any suggestions
-
Exif "translator" ???
The exif data shown by Aperture for my camera, comes through as numeric information, in some cases. For example, the "Metering Mode" shows as "1", "2", etc, rather than spot, matrix, whatever. I've developed a list of "translations" that are on a sti