Currency conversion in the Business Explorer(Query design)

Hi Experts,
How to convert currencies from CAD to USD using the “Current exchange rate 0011” for a particular record in the Business Explorer (Query Design).
Any useful answer will be rewarded with suitable points.
Thanks!
Rohan

Create a currency coversion type for the exchange rate
Go to RRC1, enter a  name for your new currency conversion type
on the exchange rate tab mark the radio button Exchange Rate Type.
enter the exchange rate type there
enter the target curr in the tar curr tab as USD
similarly in the query also enter the curr conversion key.
hope it helps,
assign points if useful

Similar Messages

  • Business Explorer-Query Designer

    Hi,
    I am running a Query in internet explorer from Query Designer...When i drag and drop infoobjects certain infoobjs description i need to change as per requirements...and when i run the query from query designer it opens in a internet explorer only but i get some warning messages saying that "description for so and so infoobject is changed" but no doubt i get the report correctly... Please tell me how to suppress the warning messeges...
    i tried rsrt transaction to suppress results as one option is there to suppress results but when i run that transaction its throwing dump...
    please tell me anyother way to resolve this...
    thanks,
    Vijaya.

    Hi Vijaya,
    Do you get those messages each time your run the query? In RSRT you have the option to suppress message, not results...is this what you were referring to?

  • Currency Conversion TAB is Disabled in Query Designer !

    Hi All
      When I create a selection under STRUCTURES, currency conversion tab becomes disabled...wheras if I create a FORMULA, I can see the Currency conversion TAB...
    But I need to do the conversion in SELECTION KEY FIGURE..Could I know why that happens??
    Thanks
    BI Learner
    Edited by: SAP BI Learner on Dec 4, 2008 5:03 AM

    hello,
    Firstly, the data type of the keyfigure which u have used in the selection should be of type Currency.
    Also,
    Have you created the currency key.create the currency key in RRC1 transaction and check.
    Regards,
    Dahnya

  • Problem with the icon "Display query on the web" in Query Designer

    Hi Friends,
             I was told by my PM to give them all FI Modules standard business contenet reports, so for that reason i have installed all FI business content & loaded the data in the Dev Server, now i just want to show the reports, but i want excute these reports in Internet Explorer using the Icon "Display Query on the WEB" in query designer, when i click on that it isn't getting displayed in the browser.
             the URL coming like this, "http://itcchqbd:8100/sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&INFOCUBE=0FIAA_C11&QUERY=0FIAA_C11_Q0001&VARIABLE_SCREEN=X&DUMMY=1"
    getting the message in the page, the page can't be displayed,
              How to solve this problem & how do i have to show the standard business content reports to all FI Superiors ?
    awaiting for ur answers
    Regards,
    Balaji

    Balaji,
    first check if you have enabled web reporting on your BW server ( there is a how to paper for the same )
    another way to check out the same is to find out if there are existing web templates being published which would make the server web ready.
    As for FI content - activate the FI relevant areas in Business content and then activate the respective datasources and then load the data.. or go trough the best practices for BW-FI ( service.sap.com/bestpractices) wnd then activate the best practices for the same.
    Hope it helps.
    Arun
    Assign points if useful

  • Federating the Business explorer role

    Recently we have successfully federated some reports for some business users.  Now another business group is interested in federating the Business explorer role.  They would like to take advantage of the BexWebanayzer iview and a few of its features.   They want the ability to personalize (change the columns and filteringu2026) a report and save it in their personal Portfolio area in KM on the producer.   I'm having some issues federating that iview and the business explorer role.  Is anyone aware of any other SAP users that have federated the Business explorer role?
          Along with federating the role the users would like to hide 2 of the tabs within the popup iview of the "save as" in the BexWebAnalyzer iview . I don't know if this is even possible to modify the popup and I can't seem to find that popup object/iview.
    Thanks, any info is appreciated.
    Jim

    Hey @ All,
    how did you install the EP? What kind of Usagetype did you select?
    To have the BI content installed to the EP you need to install the BI usagetype as well. So in SAPinstaller you have to check the marks properly.
    If you have installed only the EP usagetype you are able to reinstall the BI usagetype afterwards. As far as I know you can start the SAPinstaller again and set the right checkmarks.
    The BI (usagetype) content needs a WEBAS Java and EP installed.
    Hope this explanation helped a little... if so points are very welcome since i am starting from scratch!
    kind regards
    Tobi

  • Problem executing a report in the Business Explorer

    Hi people,
          I'm trying to execute a report with the transaction RRMX in BW but when I execute it in the business explorer I receive this error:
    internal error Problem when writing table: C_T_VARIABLES
    Abort system error in program SAPLRRK0 and form NODE_AUTORITY_FILL_2
    Someone have an idea of the problem?
    Thanks a lot!

    Hi
    Is it for all your reports ?
    If it is for one, what does it do ?
    Do you have the customer exit activated and filled in ?
    PY

  • Define the Version of Excel starting over the Business Explorer

    Hello,
    we are running SAP BI 2004s. On my computer are two versions of Excel installed. Excel 2003 and Excel 2007. Actually over the Business Explorer I can only start Excel 2003. Is there a possibility to change this adjustment without deinstalling one version of Excel? I need both versions because of tests.
    Many thanks!

    Jörg,
    another way of starting BEx analyzer is by running the XLA file directly out of Excel.  Open up the 2003 version, and start this file (this is the default location):
    "c:Program FilesSAPFrontEndBwBExAnalyzer.xla"
    BTW - I use both versions of excel (2003 and 2007) with BEx, and both are running fine.  Beware that you cannot save workbooks in xlsx format (new Excel 2007 open XML format) and then save them in the system yet (will be fixed in the upcoming support stack I believe).  For that reason, I typically would save the workbook by using Office 2003, and then when I return to it, I can use either 2003 or 2007
    good luck
    Pasha

  • Maximum number of records displayed on the browser using Query Designer.

    When you display a query on the web using Query Designer is there a maximum limit of how many records (rows) it can display? For example, can it handle 25 million records?
    Thanks.

    Hi Sebastian,
    I still find such a requirement weird as one cannot definitely go thru' so much of data at a time - it would thus always make sense to perhaps filter on some criteria which would make analysis & perhaps even download much faster. The limit as I understand is approx 750,000 data cells. Maybe the below link & SAP notes can help validate
    Limitation in No. Of data cells displayed in BEx Analyzer
    SAP Notes :-
    Note 1040454 - Front-end memory requirement of the BEx Analyzer
    Note 1030279 - Reports with very large result sets/BI Java
    Note 1411545 - BExAnalyzer: safety belt for large resultsets
    --Priya

  • To find the version of query designer currently installed in BI DEV

    Hi.. Where can I find the version of query designer (BI addon) installed in my BI DEVsystem.

    Hi,
    At the time of opening query designer it will show .
    Open query designer and  on menu bar go to help tab and select about .
    Thanks.

  • Currency conversion in the query designer level

    Hi
    Iam calculating the 'Financial Loss' in the Formula in the query designer.And it comes in SAR(Saudi Riyals).
    But i want the 'Financial Loss' in USD in the Query Designer. Because i want the USD Financial Loss to be use in some other calculation.
    Please let me know how can we do this one in the query designer. I really appreciate for it .
    Regards
    Kumar

    Dear Ravi,
    Basically there are 2 ways to do it: routine & query level.
    If query level, you need to maintain it first using tcode RRC1, then you use it in your KF in your query. .
    Routine level,
    You can create new KF in info-provider, then in the update rules routine, you can use this function to convert the currency :
    CONVERT_TO_LOCAL_CURRENCY
    Hopefully it can help you a lot.
    Regards,
    Niel
    thanks for any points you choose to assign.

  • Currency Conversion terminates the query execution

    Hi friends,
    When I execute a query it terminates due to the following error in currency conversion. "Abort System error in program CL_RSR_RRK0_CURR and form FILL_CUDIM_02-04 (see".
    conversion works fine and gives correct values in target currency when the source currency is say thailand bhat, malaysian ringett, philippino peso etc.., but when i use the source currencies of zimbabwe or kenya i get this error and next the query terminates.
    Can any one of you suggest me what could be the problem. How do i systemtically approach to solve this problem.
    Thanks
    Raj

    Hi Serjio
    All the currencies mentioned currencies are available in the TCURR table including the exchange rates from those currencies to USD.
    Hi Sven,
    I am sorry, I really didnot understand when you say "set the flag for protocol to X". You may throw more light on this. I tried debugging the program RSW_CUR_TRANSLATION_RATE_GET in the past step-by-step. This leads to lots of other programs and i was really lost in them. Pls guide me to debug it effectively.
    Hi Serjio/Sven,
    Further, i missed out to mention the following details in my post. We have two version of a this COPA query. One is older and the other is newer. Both were created before we upgraded from 3.1C to NW2004s.
    The older version works fine. The conversion from source to target currencies is good for the african currencies also besides the asia-pacific (AP) currencies. However, the newer version throws out the error message i have mentioned in the post for african currencies but works fine for asia-pacific currencies. Even the newer version was working fine before we upgraded from 3.1C to NW2004s. Its only after the upgrade that we are encountering this problem.
    In the query we are also converting the data to SGD (singapore dollar), besides USD. As i donot require this data i have hided the values in SGD. As a reason we have never maintained conversion rates/factors for converion from any of the AP or African currencies to SGD. Due to these missing rates I get an Information message to maintain the conversion rates/conversion factors for AP/African curr to SGD. This message appears along with the error message(mentioned in my post) on the same screen. This information message also appears for the older version of my query, which is currently giving correct $values. But I think we can ignore this message. Else do you think, in some way these missing rates are responsible for the trouble??.
    But more surprisingly why is that the older version is not impacted by the upgrade while the newer is affected?
    Pls share your views
    Thanks
    Raj

  • Query potal limits the Row in Query designer

    Hi All,
    When i am executing the query in Query designer 7 it is showing as 4 or 5 columns only. We need to show the complete report.Everytime we are clicking on next page and going forward. Because of this reason we are going for WAD.
    Is there any alternate solution where we can show the maximum number of row in the first time execution itself??
    Thanks in Advance
    Regards
    Sathiya

    Hi Sathiya,
    this can be done by enhancing the standard template. Check: [How to Enhance SAP BEx Web Analyzer (0ANALYSIS_PATTERN|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/200d6cb6-080e-2b10-84a5-b96723ad8f18]). This link will give you information howto...
    Additional:
    http://help.sap.com/saphelp_nw04s/helpdata/en/f9/7f12403dbedd5fe10000000a155106/frameset.htm
    Go in you copy of 0ANALYSIS_PATTERN described in how to and help.sap link to WAD and modify the analysis web item. Paramter: BLOCK_COLUMNS_SIZE
    http://help.sap.com/saphelp_nw04s/helpdata/en/76/489d39d342de00e10000000a11402f/frameset.htm
    After that go to SPRO>SAP Netweaver>Business Intelligence>Settings for Reporting and Analysis>BEx Web>Set Standard Web Templates>Ad Hoc Analysis.
    You have to restart the J2EE Engine that you changes will overwrite the existing ones...
    Regards
    Andreas

  • Currency conversion with the wrong exchange rate type

    Hi,
    I need a currency conversion in my bex query. I have defined a currency translation key with a assignment to the exchange rate type "M".
    When I check the results in the query it works with exchange rate type "EURX".
    Exchange rates are in the TCURR.
    Can anyone help me.
    Thanks in advance
    Jürgen

    Hello,
    We just had the same issue, and in checking the Currencies: Translation Ratios in transaction OBBS, I noticed that the currency translation key in question was set up with an entry of "EURX" in the "Alt. ERT" column.
    I copied the line and created a new entry with a "Valid From" date of the current month, but without the "EURX" Alt. ERT alternate and that seemed to solve it. 
    Anything entered with a date after the new Valid From date would use the manually entered exchange rate, while anything with a prior date continued to use the EURX rate.
    It appears to me that the "Alt. ERT" functions more as an override than an alternate, so if you want the system to actually use the "M" rate, I believe you have to ensure there is nothing in the "Alt. ERT" column.
    I hope this helps.
    Blaine

  • How to restrict the attribute values for the user in query designer

    Hi All,
    I have a requirment where certain user would see certain vailes in the query desiner of the attribute.
    The requirment is we have planing material which is attribute of material
    When X user want to restrict the  values for planning material ,where he is able to see all the planning material.But who is not authorized for all the value.
    Ex: X user has authorization for see planning material 100,101,102. of material But when he try to restrict the planning material in query designer where is getting all values of planing material.
    Or
    is there way to blank the restriction help.so that he can't able to see values while restricting
    Please some one can advise me on it..

    Hi,
    Let me sum up:
    you have an object ZPLNMAT for the planning material
    you have the object 0MATERIAL for material and this object has ZPLNMAT as attribute.
    If you can restrict in the query designer, I suppose this attribute is then as navigationnal and also added in the multi-provider.
    The object ZPLNMAT is checked as relevant for authorization, and you set up a role with the attached values of ZPLNMAT this user should have access to.
    Are you sure the users are restricting on the ZPLNMAT object and not 0MATERIAL, because you should have everything now
    PY

  • Unable to see the variable in Query Designer

    Hello Experts,
    I am running one report and it is showing me 0calday variable selection screen at run time. I am unable to see this Variable on my Query designer but when I am opening query properties its showing me in this.
    Kindly let me know where is this Variable using in my query designer ?
    Thanks,
    Anoop

    Hi Anoop,
    The variable is probably being used to restrict a key figure.
    Go to the key figures,
    Display the technical names
    Check the key figures for which the technical name is not appearing even though the key figure is not a formula.
    Here you will see one of the key figure being restricted by a variable for 0calday
    Hope this helps.
    Regards,
    Joe
    Didnt notice the question is answered :P
    Edited by: lazarus_joey on Feb 17, 2012 6:48 PM

Maybe you are looking for

  • Where can I buy a new ATT sim card?

    I just got a new iPad 3G in Mexico and would like to buy an ATT sim card to use it in the USA to avoid roaming charges while in the US. Can I buy an ATT sim card? where? Regards, JGarcia

  • Re: help with calling methods

    TL;DR--OK, here are 2 things for you to check 1 - are you making changes to your object in a scope as a passed by value variable? public void myMethod(MyObject o){   o.my_int = 66; }when you return from this method, my_int will be the same as it was

  • Unordered List

    Can anyone tell me how I can use ticks and crosses in dreamweaver instead of bullet points, i have a clinet who has requested both and I cannot for the life of me find a way from within dreamweaver or from googling it. Any help would be appreciated

  • Hey guys, my firefox keeps hanging whenever i load a flash-played item. I've tried a lot of solutions but they all still do not solve the problem. Please help

    This started off only very recently, perhaps less than 1 month ago and it's already starting to bother me. I have tried reinstalling, using flash-switcher, downloading Flash-player(non-ie), and a few others. Please help me asap, thanks a dozen.

  • Icloud photostream share not showing all pictures

    I made an icloud photostream share for my parents with some fotos. On iPhoto I can't see all the photos inside. On my iphone, istead, I do see all photos, the same happens on the web, i can see all photos there, too. how can I force iphoto to sync th