Currency Conversion issue in BW reporting

Hello Experts - I have a Revenue KF in COPA cube. For one specific record the currency type is TWD. When I run the report using the Key Figure (along with other Chars), the value is multiplied by 100. I do not have any scaling factor set at the report level or currency conversion set for the Key Figures. It works fine for other records with other currency types. Does it has any thing to do with the TCURF / TCURV tables? Appreciate your help.
Rgds,
Venu.

Hi Venu,
For different currency types there are scaling factors set by default. When you will run the report, the displayed result is calculated with the scaling factor.
Regards,
VA

Similar Messages

  • Currency conversion issue in SPM. We are getting incorrect results with SPM conversion function from one of the document currency to USD.

    Currently we are using SPM 2.0 version and we have been facing currency conversion issues.
    Please help me in following aspects.
    1) Where actually currency conversion happens in SPM. Is it the global program which does the conversion or other way.
    2) We have conversion issue for one of the currency where conversion function is giving incorrect results when converting from one of the document currency to USD. here The respective document currency is considering the 1:1 ratio with Dollar which is actually incorrect.
    3) We have verified in both BI side(currency tables) and even ECC side.
    Please help me in understanding this issue and let me know if you need more information on this.
    Its an production issue and appreciated your immediate inputs.
    Thanks
    Kiran

    Hi Arun,
    The following information may be helpful to you.The SSA_HELPER_PROGRAM has options regarding currency settings.
    EXCH_RATE_TYPE: This flag governs the exchange rate type which will be used for currency conversion in data management. For example if RSXAADMIN contains an entry EXCH_RATE_TYPE = „ZSPM‟ then the conversion type used for currency conversion is ZSPM. The default value for the exchange rate type is „M‟. More details can be found in the note 1278988.
    CURRENCYCONVERSION: By default data management converts all the measures in transaction currency to reporting currency and copies over to the corresponding measure in reporting currency. If the measure in reporting currency is already available in source it might be desirable to disable the currency conversion. To disable the conversion you can make an entry CURRENCYCONVERSION = „ „ in the table RSXAADMIN. This can also be achieved by running the program SSA_HELPER_PROGRAM with the option DEACTIVATE_CURRENCYCONVERSION. The conversion can be reactivated by running the same program with option ACTIVATE_CURRENCYCONVERSION.
    UNITCONVERSION: Similar to above. To deactivate unit conversion you can use the program with option and DEACTIVATE_UNITCONVERSION and to reactivate ACTIVATE_UNITCONVERSION. By default both the conversions are switched on
    EXTERNAL_CURRENCIES: Normally most of the international currencies are stored with two decimal places however certain currencies do have 0 and 1 decimal place too. For example JPY has 0 decimal places. SAP internal format stores even these currencies with 2 decimal places and at the time of display it changes the value to right decimal places. In case a file from external source is loaded to SPM it might have the format with 0 decimal places in the file. To convert it to SAP standard format post processing needs to be done on this value. If that is the case you can set the flat EXTERNAL_CURRENCIES = „X‟ in the table which will enable the post processing for these values. This flag can also be set and reset using the helper program using the option TURNON_EXT_CURRENCY_FORMAT and TURNOFF_EXT_CURRENCY_FORMAT.
    Kind Regards,
    John Harris
    Senior Support Engineer, SAP Active Global Support

  • Currency Conversion Issue

    HI experts,
    i have an issue with my currency report,
    where user want see the sales volume data converting from CAD to US $.
    when i checked the query the conversion type is Avg rate M source to CAD and the Target currency is CAD only.
    but when he execute the report he want to see the volume data in USD $.
    and when i execute the report i can see below error.
    Could not find any data to display. This might be due to the current selection of variable or filter values.
    can some please help me out this issue.
    thanks
    Raj

    Hi venu
    thanks for the post,
    there's no selection criteria being used by the user, has web link, once he click on link, he directly checking the report.
    so there's no section screen available.
    and there's no variable created for the  currency conversion type .
    here my requirement is to display currency in USD $ from CAD $.
    target currency maintained as CAD in RSCUR tcode.
    how would i do this,
    and again the same report is being used by CAD user also, so view shouldn't be change for the both users.
    what im thinking is
    is there any possibility to create variable on currency to select the required currency dynamically by user in selection screen
    please let us know possible solutions like without changing the view for CAD users
    please let me know for more info
    regards
    raj

  • Currency conversion issue while creating PO from Shopping cart

    Hello Experts,
    I'm facing an issue in SRM during Limit purchase order creation from Limit shopping cart.
    Scenario:
    Shopping cart was created on 1st of June and Approved on 20th June & Po was created on the same day. But the currency conversion is no ware matching and couldn't able to trace out the same. I have tried several times to replicate the issue it never done in test environments.
    But the PO is creating with refer to Vendor currency. For example if SC was created in USD and vendor order currency in EUR then PO is created in EUR.
    the relevant notes were already updated in the system and it is working fine when the SC is created and approved on the same day.
    Please give me some idea how to fix this issue.
    Is there any way to make SC currency is priority than Vendor Order Currency while creating PO?
    Regards
    Pratap J

    Hello,
    Read information available in KBA 1862453.
    It mentions this issue.
    Regards,
    Ricardo

  • Currency conversion display in the report

    Hi,
    I've a report which displays Vendor Name, sold to party, Sold-To-Party No, Bstnk, Buyer No,Distribution Channel, Division, LI/PO Number, Sales Order,Order Description,audat,vdatu,vbeln,aemenge,aewavwr, kwert, aenetwr, stwae, etc fields in output for a given range of dates. mostly these fields r taken frm S902 n VBAK.
    At the bottom of this report i need to keep a currency conversion display as for sy-datum.
    Ex: FROM --> TO     EXCHANGE RATE/CONVERSION FACTOR        DATE
          CAD --> USD      0.95776                     1:1                                 20.02.2009
          EUR --> USD      1.44484                     1:1                                 20.02.2009
          JPY -->  USD      95.88647                10,000:1                            20.02.2009.
    for this purpose earlier they used function-pool RSAQEXCE in other program.
    i exactly dont know wther this one is std program r query. in this they used func mod "convert_to_local_currency" also.
    please let me know how sh i pass my output internal table to get desired output like this.
    Please respond qk.

    Hi Raja,
    Please note reply from Hari.
    Note: Most of the currency conversion FMS won't work if u try to run in SE37
    But the same FMs works when u execute from program. Please try to use these FMs for conversion.
    U just have to pass source amount, source and target currencies and date.
    Thanks,
    Vinod.

  • Currency Conversion Issue in Infocube Purchasing Data (0PUR_C01) Routine

    Hi Gurus,
         We are using SAP BI 7.0, We are having reports on Purchasing Data (0PUR_C01) under that 2 updates rules are there.
    For the field Effective purchase order value (0ORDER_VAL), there is one standard routine only from the Datasource 2LIS_02_SCL.
    My problem is that when there is Currency other than Local currency in field Order Currency, we dont get the Purchase Order Value though there is PO Quantity.
    Thanks in advance.
    Regards,
    Rajdeep.

    Hi Rajdeep,
    Please verify that the PSA contains data in the fields mapped to the objects below, as they are all used in the currency conversion routine:
    ORDER_VAL
    DOC_DATE
    ORDER_CURR
    LOC_CURRCY
    EXCHG_RATE
    If something is mapped incorrectly or something like that the currency conversion might fail.
    Hope it helps.
    BR
    Stefan

  • Currency Conversion issue for YTD model

    Hello,
    Currently our Client is using YTD (year to date) model to maintain data into BPC 7.5NW, and planning to use BPC for currency conversion from LC to USD. They are not converting the values in Transactional system. When performing this all Balance sheet accounts will be using YTD model for conversion, but income statement accounts should be using Periodic values for conversion.
    We have two different Entity FX types: one is USDFNC - USD functional and NUSDFNC - Non USD functional. One of the differences between these two FX types is CTA account, USDFNC is using expense Account to Book CTA and NUSDFNC is using Equity Account to book CTA.
    To achieve the above mentioned requirement, I did configure BPC as follows:
    1) Use RATE type AVG (average for Income statement accounts)
    2) Use RATE type END (spot rate for Balance sheet Accounts)
    3) In business rules for Account rate type AVG- formula would be [AVG], apply to periodic flag will be checked.
    5) in business rules for Account Rate Type END - Formula would be [END], apply to periodic flag will be blank.
    6) To calculate CTA for ENTITY FX type- NUSDFNC, I configured the following in Account Rate type AVG - destination account is equity account, Formula is [END]-[AVG], apply to periodic flag will be blank and Entity FX type is NUSDFNC.
    7) To calculate CTA for ENTITY FX type- USDFNC, I configured the following in Account Rate type AVG - destination account is expense account, Formula is [END]-[AVG], apply to periodic flag will be blank and Entity FX type is USDFNC.
    Above configuration is giving me correct converted result for all Balance sheet accounts and income statement accounts are showing the correct values when I use the formula (current period LC amount-previous period LC amount)*(current period AVG rate). But I saw difference in Balance sheet, so further analyzed CTA (currency Translation Accounts) and found that the difference is because of CTA amount only. Similar CTA differences exist for both USDFNC entities and NUSDFNC entities. So, I think my logic to calculate CTA is not working.
    I am using the standard script logic to run Currency Conversion:
    *RUN_PROGRAM CURR_CONVERSION
         CATEGORY  = %CATEGORY_SET% 
         TID_RA = %TIME_SET%
         CURRENCY = %RPTCURRENCY_SET%
         RATEENTITY = GLOBAL
    *ENDRUN_PROGRAM
    *COMMIT
    Can any one help me to understand whether this configuration is correct? I feel that I may need to change the logic for calculating CTA. But not sure about what and where
    Edited by: amarnathputta on Nov 24, 2011 5:36 AM

    Thank you Ethan,
    Let me try to explain this with few dollar amounts:
    Let us consider that I have data for 1st month (Jan) of the year 2011,
    Net income for Jan. 2011 in LC = 59916152.19
    Net income for Jan. 2011 in USD calculated using Average rate is  = $ 9,223,013.14
    CTA for the same month is  (net income in LC X spot rate) - net income in USD at average rate =((59916152.19)*(0.154617))-9223013.14 = 41,042.564
    This value is correct.
    For the month of Feb 2011:
    Net income for Feb.2011in LC = 60415519.01
    Net income for Feb.2011 in USD at average rate (with periodic flag on) = 9,300,112.38 ( I calculated this value manually and it is correct after conversion)
    calculated CTA for the same month is (60415519.01*0.154083)-9300112.38 = 8,892.035.
    But actually BPC calculated CTA is 18,547.56 (I felt that this may be because I am not using the Flag apply periodic value while calculating CTA and when I flagged that, BPC is giving me a very big difference in CTA)
    My balance sheet is exactly off with the difference in CTA.
    Hope this helps you to understand my problem.
    Edited by: amarnathputta on Nov 25, 2011 2:43 PM

  • Currency display issue in the report

    Hello Experts,
    I am facing an issue with the currency type CLP(Chilian Peso).
    It  is noted that  the CLP currency doesn't use decimals.
    In BW reports the values in Local Currency are not OK.
    For example , the right value is 150.755 CLP in R3 side But in the BW report the value is 15.075.500, 00 CLP which is misleading.
    Could any one help me how to solve this issue.
    In TCURX the following settings are maintained
    currency type    decimal
    CLP                       0
    Regards

    Hi Nivas,
    I think following things are happening.
    u2022     Updating The Amount Value into BW data target.
    When we load the data into BW having amount field in it ,it checks for the TCURX table for the currency entry.
    If the currency entry is present in TCURX table it divides the amount by 10**(2-CURRDEC entry in TCURX table)).
    u2022     Displaying the amount into BEx reports.
    The exactly converse happens while displaying such values in the report output,The amount values will be multiplied by 10**(2-(CURRDEC entry in TCURX table)) while diplaying the report output.
    Please check below thread,
    Here is the link for your reference:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/600aa67b-c348-2b10-f690-aaa81d12ec6a
    Regards,
    Deepak Chavan.
    Edited by: Deepak Chavan on Aug 22, 2008 4:30 AM

  • Currency conversion issue for condition type

    Hello,
    I am creating two invoice document.
    1. Customs Invoice (ZCDS)
    2. Inter company invoice.(IVA)
    both the invoices should be similar. Same pricing procedure is used to create both the documents but in Customs invoice YUMU condition type is not getting converted whereas in IVA the condition type is getting converted. Can anyone tell me the possible reason for this?
      ZCDS
    IVA
    Regards,
    Jagjeet

    Hi Jagjeet,
    For IVA invoice type -(For condition type- YUMU)
    Below highlighted part of code is changing KSTEU from 'E' to 'C' for IVA invoice using std prog RVIVAUFT.
    For ZCDS Invoice Type -(For condition type- YUMU)
    Program RVIVAUFT is not called since ZCDS is not trigerried using Output type unlike IVA.
    Hence KSTEU is not getting updated from 'E' to 'C' in case of ZCDS.
    To solve your problem write code in User exit - userexit_pricing_copy to change  konv-ksteu to 'C' for YUMU condition type at runtime.This will definately solve your problem.This will ensure you get correct/same condition value for IVA and ZCDS...:)
    Regards,
    Vikas Mulay.

  • Currency conversion issue, any solution for this?

    Hi Experts,
    I have input data from Excel file, every number is pure number without format.
    After uploading the file to an internal table, I assign it to a variable with data type CURR 13 with 2 decimal places.
    The problem is:
    20 USD in excel file will become 20.00 USD in SAP which is correct BUT
    20000 VND in excel file will become 20000.00 VND
    and when I saved this value to the database and view it on screen it becomes: 2,000,000 VND which is not correct. I see it 100 times than the original value.
    Can any body explain to me why? and how do I fix this?
    Thanks,
    Anthony

    Hi ,
    Use the below logic  Instead of DMBTR use your Amount field.
    SELECT SINGLE * FROM t001 INTO l_t0011 WHERE bukrs = <fs_original>-bukrs.
            SELECT SINGLE * FROM tcurx INTO l_curr
            WHERE currkey = l_t0011-waers.
            IF sy-subrc EQ 0 .
              v_con = 100.
              DO l_curr-currdec  TIMES.
                v_con = v_con / 10.
              ENDDO.
    Rgds,
    Arun
            <fs_reposted>-dmbtr = <fs_reposted>-dmbtr * v_con.
            ENDIF.

  • Concept of currency conversion.

    In a report user is getting currency conversion issue. In report  all currency which is in Pound is not converting into EUROS. 
    So can any one tell me  concept of currency conversion.
    I am not able to understand where currency conversion is happing in PN2 or  directly  in reporting. How i will know this?
    Thnaks
    Abha.

    Hi Abha,
      Currency translation is used to translate the key figures with currency fields that exist in the source system in different currencies into a standard currency in the BI system. Currency translation can be done at different levels depending on requirements and based on translation type.
    Currency conversion can be carried out in,
    i. Transformation using Function module
    ii. In Bex using conversion type created in RSCUR.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d5bf96-b19b-2c10-e3b6-e2f12a3de99a?quicklink=index&overridelayout=true

  • Currency Conversion Problem

    Hi frndz,
    I am facing a problem with the currency conversion.
    In my Report i have used two keyfgures.
    One is directly calculating the values from R/3 side and converting into EURO.
    the other one is calculating through update rule.
    These teo keyfigures should have the same value.
    In this update rule i have used one function module "Convert into foreign currency".
    This function module is calculating the value correct for all other currency only in Korean(KRW)currency i am getting probelm.
    Like R/3 side value converting in EURO in coming as
    507.35
    and through function module value is coming as 50,736.00.
    Please if any one having this problem or any one could suggest some solution then it would be great help.
    I have also tried the solution of deleting the values from SPRO but still the problem is there.
    Thanks in advance

    Revab,
    The admin may delete the record for KRW from TCURX table.
    BUT, it may affect the other applications. It should be carefully considered.
    Though, after deletion end users may check if theirs applications results with regard to KRW have been changed.
    If yes, then the record in TCURX may be added again.
    If not, then it might be a solution. Though, not recommended.
    Best regards,
    Eugene

  • Issue regarding currency conversion

    Hi Experts,
    I'm having issue with currency conversion. Default report output values are displaying in 'EURO' and I had created a toolabar with currency conversion buttons. When this button is selected, values has to be changed into user select currency like INR, USD, AUD. Here im triggering with issues, all the values are converted into 0's. Total value is only converting for first time. From next time. its not converting. I'm using FM's  CONVERT_FOREIGN_TO_FOREIGN_CUR,CONVERT_TO_LOCAL_CURRENCY,READ_EXCHANGE_RATE.
    Please provide ur solutions to solve the issue.  
    Thanks and Regards,
    Bharat

    Hi ,
    You can use this block of code..It is used in our project.
      data : l_rate type ukurs_curr,           "Exchange rate
             l_rate_type type kurst_curr,      "Type of rate
             l_l_fact type i,                  "Local factor
             l_f_fact type i.                  "Foreign factor
    check local currency ,foreign currency local amount are not initial
      check foreign_currency is not initial and
            local_currency is not initial and
            local_amount is not initial.
    Calculate exchange rate
        if local_currency = 'MXN' and foreign_currency = 'USD'.
          l_rate_type = 'MXNT'.
       else.
         l_rate_type = 'M'.
       endif.
    *Call FUNCTION module to get exchange rate
      call function 'READ_EXCHANGE_RATE'
        exporting
          date                    = sy-datum
          foreign_currency        = local_currency
          local_currency          = foreign_currency
          type_of_rate            = l_rate_type
       importing
         exchange_rate           = l_rate
         foreign_factor          = l_f_fact
         local_factor            = l_l_fact
       exceptions
         no_rate_found           = 1
         no_factors_found        = 2
         no_spread_found         = 3
         derived_2_times         = 4
         overflow                = 5
         zero_rate               = 6
         others                  = 7
      if sy-subrc eq 0.
    if l_rate le 0.
      l_rate = l_rate * -1.
    endif.
    Foreign amount
      if l_rate_type = 'MXNT'.
        foreign_amount = local_amount / l_rate .
      else.
        foreign_amount = local_amount * l_rate .
    endif.
      endif.

  • Currency Conversion types not visible for KF in BEx report

    Hi Gurus,
    I'm facing a strange issue with the curr conversion types.
    I had created a KF with 0currency for my requirement. when i'm trying to create a report on the top of the MP i'm facing this issue.
    When i right click on the KF --> selected "properties" at the bottom - we have "curr conversion types" -- here i can't see all the curr conversion types for my KF.
    Where as i checked for other KF i can see the missing currency conversion types.
    Did any one faced such issue...? please throw some light on this issue.

    HI,
    Goto RSA1 ,
    double click on you KF info Object ,
    there you can see the unit 0currency is been selected , Only those key figure which has been assigned 0currency can only be converted in Bex query.  
    Regards
    BVR

  • Issues performing currency conversion

    Guys while i am trying to run default currency conversion the package status shows as ( CANCELLED) not error or even completed which i came across for the first time. I checked all my DIM and data files. Can anyone help on this issue.
    Also i would like to know that how do you run 2 application 1.) finance 2.)  Rate in a single report(evdre)...
    Experts please HELP.

    Hey Nilanjan thanks
    That is not the issue with currency conversion. I checked whether it performed the currency conversion after the package status showed cancelled but it did not. Now i made some changes to the FX trans logic and it is showing an error that          ""Task name LOAD:""
    ""Error running default logic (Member "LC" not exist)"""
    I have maintained LC in data file as well as RPT currency DIM.
    Regarding the 2evdre in single report.
    When i create a report using =evdre() it opens a finance report if in my CV i have selected finance app.
    When i am in RATE app it creates Rate report.
    My question was how do i get the both in single sheet or even different sheets, because when i open finance report and then try and change the application to rate and then click expand all the previously created report is also converted to finance.
    I hope oyou understand and help me out.
    Thanks always.
    Dharmik

Maybe you are looking for