Currency conversion issue while creating PO from Shopping cart

Hello Experts,
I'm facing an issue in SRM during Limit purchase order creation from Limit shopping cart.
Scenario:
Shopping cart was created on 1st of June and Approved on 20th June & Po was created on the same day. But the currency conversion is no ware matching and couldn't able to trace out the same. I have tried several times to replicate the issue it never done in test environments.
But the PO is creating with refer to Vendor currency. For example if SC was created in USD and vendor order currency in EUR then PO is created in EUR.
the relevant notes were already updated in the system and it is working fine when the SC is created and approved on the same day.
Please give me some idea how to fix this issue.
Is there any way to make SC currency is priority than Vendor Order Currency while creating PO?
Regards
Pratap J

Hello,
Read information available in KBA 1862453.
It mentions this issue.
Regards,
Ricardo

Similar Messages

Error in creating PO from shopping cart

Hi,
While creating PO from Shopping Cart in SRM, we are getting the error message "Net price must be grater than 0" and the PO is not getting generated.
Is this issue is somewhere related to maintainance of pricing conditions? if yes, how can we maintain that?
Regards,

Hi,
Are you creating PO directly from shopping cart or through PR.If through PR (Purcahse requisation) then chack the valution price in valution tab in PR (ME53N)
PO directly from shopping cart then check the price in Basic data of the shopping cart.if price is there it should reflect in PO.Check your shopping cart free Zero value shopping cart.

Problem in getting data while creating public template shopping cart(urgen)

Hi Gurus,
I am technical guy...Could you please suggest me how to populate the purchase organisation details(be_pur_org) which is of type bbps_sc_app_item.
The problem is while creating normal shopping cart template it is displaying the vendor and inforecord details..when I use the same data for creating the public shopping cart it is not displaying the values (vendor and inforecord details) this is due to the missing of purchase organisation field value which is populated in the field be_pur_org which is of type bbps_sc_app_item.
Is there any badi's to populate the purchase organisation details...?
awaiting for all your replies..points will be rewarded with lots of appreciation
Thanks & Regards,
Ravi Ganji

Hi
<u>You can use either of the BADIs depending on your requirement.</u>
BAdI Definition Name Description
BBP_PGRP_ASSIGN_BADI EBP Purchasing Documents: Assign Purchasing Group(s)
BBP_PGRP_FIND        Shopping Cart: Determine Responsible Purchasing Group(s)
BBP_DOC_CHANGE_BADI
BAdI for Changing EBP Purchasing Documents
<b>Please read the Standard documetation available with them using SE18 transaction in SRM system.</b>
Which SRM version you are using ?
Hope this will help.
Please reward suitable points.
Regards
- Atul

Error while creating Multiple Items Shopping Cart with Asset Assignment

Hi All,
I am creating Shopping Cart with multiple items for different Assets.
Example: I have Two Assets (Asset A with the budget of $1000 and Asset B with the Budget of $1500) in the back end system.
Asset A assigned to Order 102649996 (value - $1000) and Asset B is assigned to Order 102645121 (Value - $1500).
I am trying to create Shopping Cart with Two Items for Asset A and Asset B (which are available in Back End).
I created First item (001) in the Shopping Cart for Asset A and Value $750.
I copied the First Item Details to Second Item (002) and changed the Asset as B and Value $1000.
When I click on Check tab in Shopping Cart Browser, the SRM System is giving the Error Message like
Item 001 Order 102649996 budget exceeded
Item 002 Order 102649996 budget exceeded
I am getting the above error, only when I copy the first item details to the second item while creating Shopping Cart.
Actually the Budget is not exceeded (Asset A Budget is $1000 - First Item and Asset B Budget is $1500 - Second Item) and SRM system is taking the order 102649996 (which is assigned to the Asset A) for the Second Item 002 also.
Kindly let me know the Solution or Please let me know do we have any OSS note to resolve the issue.
Thanks a lot in advance.
Best Regards,
Sudarsan
Edited by: KOYYA SUDARSANA NAIDU on Aug 18, 2008 8:22 PM
Edited by: KOYYA SUDARSANA NAIDU on Aug 19, 2008 6:29 AM

Hi. It is a "feature" of SRM.
I asked SAP about it and did not get a good response.
If you enter Asset A, it will copy the internal order number from that asset into the cart. You can not see the internal order in the web, but you can see it in BBP_PD.
If you then change the asset to asset B, it will not refresh the internal order number.
This means you get internal order A on asset B.
It happens any time you change asset number, so if you copy a line then change you will get this problem.
We ended up using the BBP_DOC_CHANGE_BADI to RFC into R/3 and update the internal order number.
Regards,
Dave.

Ibase/Component issue while creating a message from satillite system

Hi experts,
we have implemented the service desk functionality in solution manager system.
User is able to create message in solution manager directly.
While creating message from a satellite system IBASE/component fields are filled with incorrect values.
Because of this user unable to create message from satillite system.
Has someone any ideas where we do some settings to get correct Ibase/Component values while creating message from satillite system?
Thank you in advance,
Babu

Hi Babu,
For Creating messages in SOLMAN make sure that in T code SM30 under the table BCOS_CUST data is maitained
OSS_MSG W NONE CUST620 1.0
First your should make your solman ready for posting issues within.
Then connect it to ECC systems and try posting issues there.
Do not user Tcode NOTIF_CREATE for posting issues always use HELP- Create Support message.
Thanks
Nand

Currency conversion issue in SPM. We are getting incorrect results with SPM conversion function from one of the document currency to USD.

Currently we are using SPM 2.0 version and we have been facing currency conversion issues.
Please help me in following aspects.
1) Where actually currency conversion happens in SPM. Is it the global program which does the conversion or other way.
2) We have conversion issue for one of the currency where conversion function is giving incorrect results when converting from one of the document currency to USD. here The respective document currency is considering the 1:1 ratio with Dollar which is actually incorrect.
3) We have verified in both BI side(currency tables) and even ECC side.
Please help me in understanding this issue and let me know if you need more information on this.
Its an production issue and appreciated your immediate inputs.
Thanks
Kiran

Hi Arun,
The following information may be helpful to you.The SSA_HELPER_PROGRAM has options regarding currency settings.
EXCH_RATE_TYPE: This flag governs the exchange rate type which will be used for currency conversion in data management. For example if RSXAADMIN contains an entry EXCH_RATE_TYPE = „ZSPM‟ then the conversion type used for currency conversion is ZSPM. The default value for the exchange rate type is „M‟. More details can be found in the note 1278988.
CURRENCYCONVERSION: By default data management converts all the measures in transaction currency to reporting currency and copies over to the corresponding measure in reporting currency. If the measure in reporting currency is already available in source it might be desirable to disable the currency conversion. To disable the conversion you can make an entry CURRENCYCONVERSION = „ „ in the table RSXAADMIN. This can also be achieved by running the program SSA_HELPER_PROGRAM with the option DEACTIVATE_CURRENCYCONVERSION. The conversion can be reactivated by running the same program with option ACTIVATE_CURRENCYCONVERSION.
UNITCONVERSION: Similar to above. To deactivate unit conversion you can use the program with option and DEACTIVATE_UNITCONVERSION and to reactivate ACTIVATE_UNITCONVERSION. By default both the conversions are switched on
EXTERNAL_CURRENCIES: Normally most of the international currencies are stored with two decimal places however certain currencies do have 0 and 1 decimal place too. For example JPY has 0 decimal places. SAP internal format stores even these currencies with 2 decimal places and at the time of display it changes the value to right decimal places. In case a file from external source is loaded to SPM it might have the format with 0 decimal places in the file. To convert it to SAP standard format post processing needs to be done on this value. If that is the case you can set the flat EXTERNAL_CURRENCIES = „X‟ in the table which will enable the post processing for these values. This flag can also be set and reset using the helper program using the option TURNON_EXT_CURRENCY_FORMAT and TURNOFF_EXT_CURRENCY_FORMAT.
Kind Regards,
John Harris
Senior Support Engineer, SAP Active Global Support

Issue while creating repair order via IW52

Hi All,
I am facing an issue while creating a repair order from Service Notification.
In IW52 for service Notification , we have option of Create repair order in Action box of service notification, when i am clicking that i need to enter the sales order type.. when i am selecting standard order type KD01 or any other it is saying that
1)Order type KD01 does not have the sales doc. identifier "repair"
Message no. QM127
Diagnosis
You entered an order type that is not assigned to the sales document identifier "F" or "G" = repair order.
Procedure
Enter an order type that has the sales document identifier "F" or "G".
Where can we see sales document identifier in config ?
2. I would like know is there any setting where we can give default sales order type to service notification type ..
regards
giri

Dear,
Thanks for your inputs. It will be great help if you can let me know the below :
1) Diff between Repair order, spare parts order..
2)I happened to create a service order from a sales order following IDES Model for CS -4.6C / the service order type created is SM01 is created and my sales order type is OR .. now my question is there any setting where we assign Service order type to sales order type ???
Note :- In OIOL Tcode for SM01 Order type i have IRC Sales order document type linked ..
regards
giri

Error while creating datasource from table MBEWH

Hi all,
I am facing an error message while creating datasource from table MBEWH
"Invalid extract structure template MBEWH of DataSource "; This operation failed, because the template structure quantity fields or currency fields, for example, field LBKUM refer to a different table.
Can anyone help me that why system is not allowing me to generate generic datasource for table MBEWH to transfer my month wise inventory data.
thanks and regards.

Hi Zakir,
      This was comming for classification data... when ever you want to extract some classification related data then we can't create generic datasources directly.. for that you need to go with CTBW ( tcode ) and   create one datasource...
   so, you need to check that   related table also.. for that MBEWH table..
    ALL THE CLASSIFICATION RELATED DATASOURCES WE CAN'T CREATE DIRECTLY... JUST LIKE AUSP table also.. liek this..
regards
@jay

Error while creating DTP from DS to Infoobject

Dear All,
I am getting one error while creating DTP from Datasource to Info object can any one give some suggetion regarding this issue.
Issue:Enter a valid value
Msg No:00002
Procedure: Display the allowed values withF4 and correct your entry,
Regards,
Satya

Hi Satya,
Trying logging off the system and log in again and try to activate Data source Infoobject and transformation again and try creating DTP by selecting Selecting the source system by pressing F4. I hope it should work.
I don't find any specific problem or any patch problem with the error you are getting.
Hope it helps !
Regards,
Rose.

Error while creating datasource from view ZBSIS_VIEW

Hi all,
I could not create the datasource on the database table BSIS as it said "Invalid extract structure template BSIS of Datasource". I had suggestions that I should create a view and then create the Datasource on it. So I created the view and tried. But still I am facing an error message while creating datasource from custom Database View ZBSIS_VIEW.
"Invalid extract structure template ZBSIS_VIEW of DataSource"
Can anyone help on this regard.
thanks.

Hi,
Yes. You need a create a view on tables BSIS, BKPF and T001 as the currency/quantity fields in BSIS have reference fields from the other 2 tables.
In BSIS, in the currency/quantity fields tab, you have some ref tables and fields. You would need to include these tables and join in the view. You would also need to include the ref fields like WAERS, HWAE2, HWAE3, etc in the view. Then you would be able to create the datasource.

Error has come while creating USER from SU01

Dear Expert,
I have got typical error while creating user from T-Code SU01.
Problem is like that : I suppose to use SU01 and "User Maintanace: Initial Screen
has come. Now I put the new user name like ABAP2008 or FI2008 (what ever the name thats hardly matter) and click on CREAT button then next screen Maintain User has been appeared.In this screen Address TAB is on and asking for fillup all the required user information.So I have been made all information like :First name /Last name /Tele ph/Fax / email etc etc. After complete this tab when I clicked on next tab is called "LOGON DATA, it has been given a error "Specify a valid country indicator
Message no. T5027" . Even thogh I didn't able to go to next screen LOGON DATA.Because of these problem I doesn't able to creat a user.
SAP : IDES version ECC 6
DB:SQL2005
OS: Windows 2003 server
Please do the needfull
Thanks & Regards
Pavel

Hey Pavel,
Are you using ECC with ISU.. ? I am not sure but I feel your issue can be solved with information provided in SAPnote,
Note 1046566 - EC70: address-independent telephone number no country.
The system does not transfer any country from the master data template with the address-independent telephone number. The system issues the warning message T5027 "Specify a valid country indicator".
All the best !

Issues while creating a search project in BCC

Hi There,
Migrating the apps from 2007.3 to 10.0.3.Experiencing issues while creating a search project.
Step #1.In Search Administration,navigating through Project > Global Settings & creating a Content Label named as "Catalog"
Step #2.Navigating through Project > Create Production Project.Creating a project with Content Set as "CatalogSet"
Step #3.Adding a Content with this info:
          Content Name: Catalog
          Type of Content : ATG Repository
          IndexingOutputConfig Path : /atg/commerce/search/ProductCatalogOutputConfig
          Host name : localhost
          RMI : 10160 ( RMI port of commerce instance)
     Creating a content & getting the message as New Content "CatalogTest" has been created.
     Issue #1: Content is not displaying in the Content eventhough content has been created successfully.
     Issue #2: Getting error for "Default Text Processing Options"
     You can refer these issues in the attached screenshot "Content-Page-with-error.jpg"
Step #4.Creating a new TPO as "English" & trying to "Associate Search Project" & getting an error.Refer the attached error log "Associate-Search-Project.log"
Due to these issues, "Build Index" button is disabled.Did anybody experienced these issues? Any help/comments are appreciated.
Also attached the full server logs as commerce-server.log & publishing-server.log.
Since no options for attachment in this forum, I posted the attachment in this link.Please refer it.
https://groups.google.com/forum/?fromgroups#!topic/atg_tech/csEHi-x3Nyc
Thanks in advance!
Mani
Edited by: user11263665 on Apr 25, 2012 10:38 PM

We faced the same problem when migrating from 2007 to ATG 10.0.3. The reason this error comes up is because the Search depends on a local customization adapter /atg/searchadmin/adapter/customization/LocalCustomizationDataAdapter which adds English as a language in the text processing options.
After the migration you need to import the initial ATG search related data into your Search schema. These instructions have been mentioned in the ATG install guide. Here is the extract from the docs.
Note: The import scripts import data using startSQLRepository. Make sure your JTDataSource and
FakeXADatasource are configured to permit this in home/localconfig. JTDataSource should automatically
point to FakeXADataSource. FakeXADataSource should point to the administration database, and
FaxeXADataSource_production should point to the production database. Note that some product
installation processes, including Oracle ATG Web Knowledge Manager Self Service, need FakeXADataSource
pointed at the production database, so you may need to change the FakeXADataSource between installations.
once you are done with the configurations above, import only the searchadmindata xml into search schema as this imports the LocalCustomizationDataAdapter config information into your search schema. Once this is done, you should be good to index.
<ATG10dir>\home\bin\startSQLRepository.bat|sh -m SearchAdmin.AdminUI
-repository /atg/searchadmin/SearchAdminRepository -import
<ATG10dir>\Search10.1\SearchAdmin\common\data\initial\searchadmindata.
xml

Issue while creating a new web part page (Safeunit.aspx) within a folder located under a Document Library.

Hi, I am facing an issue while creating a new web part page (Safeunit.aspx) within a folder (Safematic Seal Support Systems) located under a Document Library (Product Information Documents).
The path I am explaining:
Going to the Document Library (Product Information Documents) --> now inside that, clicking on a folder (Wet Seal Support
Systems) --> now inside the folder clicking on another sub-folder (Safematic Seal Support Systems) --> Here I want the web page Safeunit.aspx
Issue is that when I reach to the required destination, and want to create the web page by clicking on 'Site Action' --> 'Create' --> 'Web Part Page', now while selecting the Document Library name from the drop-down list, I do use 'Product
Information Documents' since the folder is inside this library only; but that create the page directly under the 'Product Information Documents' library, not under the sub-folder (Safematic Seal
Support Systems).
FYI, it is SP2007 version.
Kindly assist in this. Thanks in advance.

I see that you have the namespaces reference in your code.
I think you have changed the NameSpace name of your code to CreateSPFolder, change the reference in all your manifest, and other files to point to the current namespace name. It should help.
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

WHAT ALL MESSAGE'S ISSUED WHILE CREATING PO

Sir,
ply let me know after saving the po i want to know what all messages were issued while creating the po.
Like "warning" or "information" message
where can i see this
regards
amey

Hi,
PAth- Spro-MM-Purchasing-Environment Data-Define Attributes of System Messages...
Here are few message type:
Contract has different purchasing organization &     W
Validity period of contract does not start until &     W
Validity period of contract expired on &     W
Target value of contract & exceeded by & &     W
Net price for item & taken from conditions     W
Purchase requisition & item & already deleted     W
Scheduled quantity & & greater than target quantity & &     W
Quantity smaller than invoiced quantity &     W
Target quantity exceeded by & &     W
Not possible to determine a consumption account     W
Release date lies in the past     W
Base unit of measure & adopted from material master record
Release date: next workday is &     W
Contract target value & reached     W
Please only use plants with company code &
Order unit copied from material master record     W
Hope it helps.
Utsav..

Issue while creating connection pool in weblogic using SERVICE NAME

Found two issues while creating connection pool in weblogic using SERVICE NAME
1. While running apps from jdeveloper using xxx-jdbc.xml
weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Io exception: The Network Adapter could not establish the connection
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:253)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1033)
     at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:214)
     at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1051)
2. Configuriing the jndi in Weblogic server
weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:SERVICENAME
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:253)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1033)
Problem
database url is generated based on SID
eg: jdbc:oracle:thin:@localhost:1521:SID
Solution
(generate seperate url for SERVICE NAME)
jdbc:oracle:thin:@localhost:1521/SERVICENAME
------------------------

It is so clear: host not found error for network connection and the other SID servcie name not found means your oracle instance name is not up. check with srvctl status for given servcie name or node, else check CRS_Stat -t if you are using RAC.

Currency conversion issue while creating PO from Shopping cart

Similar Messages

Maybe you are looking for