Currency Conversion types not visible for KF in BEx report

Hi Gurus,
I'm facing a strange issue with the curr conversion types.
I had created a KF with 0currency for my requirement. when i'm trying to create a report on the top of the MP i'm facing this issue.
When i right click on the KF --> selected "properties" at the bottom - we have "curr conversion types" -- here i can't see all the curr conversion types for my KF.
Where as i checked for other KF i can see the missing currency conversion types.
Did any one faced such issue...? please throw some light on this issue.

HI,
Goto RSA1 ,
double click on you KF info Object ,
there you can see the unit 0currency is been selected , Only those key figure which has been assigned 0currency can only be converted in Bex query.
Regards
BVR

Similar Messages

Currency Conversion type not visible in the query

Hi ,
I created one currency type conversion   Z_INR
exchange rate type : M
Exchange rate from infoobject : zexch_rate(key fig)
source curr from data record
Fixed target curr : INR
Variable time reference : A to Exact Day
Special info object : Ztr_date (Transaction date)
it got saved succesfully but wen i try to include this in the query its not visible there . can anyone let me know why this problem is coming
help will be appreciated .
i also included rate and date in the query still not visible

Hi,
Create Currency conversion type using Trans: RRC1.
1.Specify your Exchange rate type.
2.Dynamic Exchange rate type
3.Source curency from data rec.
4.Fixed currency say USD.
5.Select Variable Time reference "Start Month" and Special Info Object - 0calmonth
Secondly In the key figure field to be converted in the query,   select properties - select the currency conversion key name .
Thanks,
Nagesh
Sony Singapore

Currency conversion type with variable for target currency

Hi,
I use a currency conversion type with a bex variable for target currency in a query in order to convert a Key Figure. It works fine but instead of short text description there's the technical description of the variable in the selection screen. How can i change the description of the variable ?
For information, in the bex, we can't see the variable in "variable sequence". I use BI 7.0
François.

Hi,
The problem was that in the maintenance of the currency translation type the option Target Currency from Variable was checked. As a consequence in the properties of our key figure the drop-down-list Target Currency was set to from variable with no chance of changing it (it was grey).
What we can do was to choose the option Target Currency Selection with Translation instead of Target Currency from Variable. Now, in the properties of the key figure we can choose the variable in the dropdown-list Target Currency and tick the option Variable Entry. As a result, the variable shows up in the query properties and we can change its arrangement.
Regards,
Siva Patil.

Currency Conversion type not in Query

Hi,
I have created a Currency Conversion Type using transaction RSCUR.
In the query i want to convert a particular column to target currency by using this curr conversion type.
But in the column properties under the conversions tab, the conversion type does not appear in the drop down.
Kindly suggest.
regards,
Vedaas

If you have followed the links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/462fe790-0201-0010-3ca4-adfd89e4f9f2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/287bab90-0201-0010-f48e-cc55b0cd13d0
Then log on and off the Query as it may be due to a refresh issue you can't see it.

Currency conversion rule not executing for manual journal entries.

Hi,
We have currency conversion business rule set in our project. THis business rule is not converting LC to other currencies for manual journal posting entries. i.e, it is audit id with DATASRC_TYPE="M".
Can any one let me know if any specific settings are to be done for this to work?
Regards,
Swetha

Hi,
Is the currency conversion working on the other datasources?
If yes, then try to post some record through input schedule in the M datasource, run the currency conversion, and see if the currency conversion is working fine or not.

Currency Conversion Type missing in BEx

I have created a new conversion translation type M1 based on Monthly Average exchange.
RSCUR definition for this conversion on the time ref tab to be a "variable time reference"- End of Period for
Standard Info Object Fiscal Period "0FISCPER".
Is this configuration the cause for placing a limiting restriction on the visability of this selection at runtime of query.
The following currency translation types are not available at the runtime of the query.
●      Translation types for which a variable is stored (variable time reference, source currency from variable, target currency from variable, and so on).
From BEx I am unable to select Currency Conversion (Convert to Currency USD) and Use of Currency Translation M1
Thank You ...... Dan

Andrey:
Once BEx query results are displayed in M/S excel ... the user navigates (right click) to (local) query properties:
Tab >> Currency Conversion >> select Convert to Currency will open option to determine Currency (USD) and Currency Translation (via drill down).
Those Currency conversion types configured with variable time reference on InfoObject 0FISCPER cannot re-determine
target currency values. Fixed Time reference conversion types can be selected through BEx.
I found a restriction/ limitation in the following thread.
http://help.sap.com/saphelp_nw70/helpdata/en/ec/076f3b6c980c3be10000000a11402f/frameset.htm
Restrictions:
The following currency translation types are not available at the runtime of the query.
●      Inactive translation types
●      Translation types for which a variable is stored (variable time reference, source currency from variable, target currency from variable, and so on)
●      Translation types in which an InfoObject is used for determining the source currency or target currency.
Are you aware of any way around this ??
Thank you ....... Dan

How to move currency conversion types

Dear All
my problem is currency conversion types and fixed&target currency is showing development but in production its not showing aft i came to know i hav to move
currency conversion types to production. i checked in rscur tcode where i got this list here i cant understand which currency type i hav to move
1.0HRFIXCUR     Fixed Target Currency, Current Date
0MEANDAILY     Middle rate using exact days
USD_VAR     usd with var rate
VAR_ALL     Multiple Curencies
ZCC01     Cost Center
ZCUR_1     Target currency type
ZCUSTTR     Local currency
ZNEWCUR     New Currency Type
ZTEST1     Conversion currency translation
2.in development i hav seen currency variables are there but for the same i hav checkded production currency variables are not there
its mandatory to move currency variables also production
iam in bi7 sp13 actually previously its working we applied some patches in r/3 fi then only we are facing this problem
can you please help me to close this issure
thanx for all

please close this thread and see the other one...

Transporting currency conversion types

I created a new currrency conversion type (trans RRC1). When I saved it, a message stated that it was successfully created/saved. However, I don't see it attatched to any of my transports (I only have 2), and it did NOT prompt me for a transport.
In addition, When I go to the transport tab of RSA1, I searched for it with it's technical name and it could not be found there.
Finally, I thought perhaps that they are untransportable, so I thried to directle create one in the BWQ system, however, it would not lety me.
SO, My Question is:
How do I collect/transport a currency conversion type object?
Thanks!
Mark

Thanks so much!!!! I went there & did that prior to my note, I just didn't notice that category. So Thanks again, you're great!!!
Mark

Currency conversion Type

Hi experts,
I created a currency conversion type in transaction RSCUR. My problem is I don't see this in BEx query designer. I used an existing one as template and experienced the same. Did I miss something or is it a system bug?
For your info we are running BI7 SP6
Regards
Aban
Edited by: Abolfazl Hassanzadeh on Feb 18, 2011 2:47 PM

Hello Vikas,
Please don't post the same question multiple times. You have alread posted the same question 3 times here.
Please see the other thread that you have posted for answers.
Thanks
Chandran

Currency conversion type by customer exit variable doesn't work

Hi all.
In my query I need amounts by quarter, applying quarters last date rates as currency conversion.
Query has Year parameter. Based on this parameter, by customer exits I calculate every quarters last date and use them as currency conversion types.
The problem is that query DOESN'T APPLY currency conversions!
I checked TCURR table - currency conversions do exist for applied days
I checked my customer exits - the date calculation works fine
I suppose where is something wrong in query processes (customer exits/currency conversions) sequence before running it.
Someone knows anything 'bout that?

Check these docs.. and check again.
[Creating Currency Translation Types|http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6813e07211d2acb80000e829fbfe/content.htm]
[Use Variables for Currency Conversion|http://www.scribd.com/doc/7061035/How-to-Use-Variables-for-Currency-Conversion]

E-Recruiting - Internal Candidates not displayed in candidate search, job postings not visible for internal candidates in job search

Hi Friends,
We are on EREC standalone model. Initial data transfer between HR to EREC master data using PFAL is done.
All employees have got NA, CP, US, BP in HRP 1001 in EREC system.
Change pointers are also activated in HCM system, now current master data changes are also in reflecting in EREC system thro IDOC posting.
But when recruiter logs into portal and does a candidate search, no internal candidates are appearing ?
1) What needs to be done for internal candidates to visible during candidate search ?
2) Also while logged as internal candidate, released requisitions are not visible for internal candidates while they try to search for internal job postings ?
Kindly provide your inputs.
Regards,
ER.

Hi,
In SLG1, getting the below error messages for multiple times.
"Error while calling content extraction class CL_HRRCF_CEC_QUALI_WITH_PROFCY
The error occurred in program CL_HRRCF_SES_BUSOBJ_FROM_SPTYPCM001 line 96
Qualification 52000001 does not exist
The incorrect HR object has the key 01NA60000029 "
"The error occurred in program CL_HRRCF_ALE_EE_INBOUND"
Also please state how to differentiate internal and external candidate search pages.
Regards,
ER.

Project Commitment Cost not visible for Purchase Orders with Item Categry Q

Hello All
I have a problem. My project commitment cost is not visible for PO's with Item Category Q. I assume that as the stock can be issued against any WBS elements I might not be able to see the cost against a single WBS element. But the cost should get recorded against the project right? If so where can I see it?
Request your help with this problem
Regards
Renjith

Hello
Could you please explain how to maintain that?
Best Regards
Renjith

JComboBox - Bottom border is not visible for the first time

JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
This happens because the list when dropped down goes out of the frame.
If have the increased the size of the Frame then i am able to see it,but i dont want to do this.
I am using jdk1.3.1_02.
Any Help would be great.
Please find the code below.
Thanks,
Sridhar.
//file: Lister.java
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Lister {
    public static void main(String[] args) {
        JFrame frame = new JFrame("Lister v1.0");
        // create a combo box
        String [] items = { "uno", "due", "tre", "quattro", "cinque",
        "sei", "sette", "otto", "nove", "deici",
        "undici", "dodici" };
        JComboBox comboBox = new JComboBox(items);
        comboBox.setEditable(true);
        // put the controls the content pane
        Container c = frame.getContentPane( );
        JPanel comboPanel = new JPanel( );
        comboPanel.add(comboBox);
        c.add(comboPanel, BorderLayout.NORTH);
        c.setBackground(Color.white);
        comboBox.setBackground(Color.white);
        comboPanel.setBackground(Color.white);
        frame.setBackground(Color.white);
        frame.setResizable(false);
        frame.setSize(200, 200);
        frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
        frame.setVisible(true);
}

Hello,
try this:JPanel comboPanel = new JPanel(new BorderLayout());Regards,
Tim

Key focus is not visible for all objects when tabbing

I'm using LabView 5.1.
The key focus is not visible for all objects when tabbing through a "disabled and grayed-out" object.
For example, let's say I create a panel with 3 buttons. If I create a "disabled" attribute for button 2 and assign the value "2" (disabled and grayed-out) to it. When I will run this VI, the key navigation will go through button 1 and button 3 (skipping button 2 as expected) but the key focus on button 3 will not be visible.
Is this a bug with LabView or am I doing something wrong ?

Hi Ben,
Don't worry, time is not an issue... I'm posting an example of a VI with the problem I described. I noticed that the problem occurs only with "dialog buttons".
When you have time, let me know if you see the same behavior. If you do, I will report the problem to National Instrument.
Thanks for your time !
BigBen
Attachments:
3buttons.vi ‏22 KB

Drop down list(JComboBox) - Bottom border is not visible for the first time

Drop down list(Combo-box) JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
I am using jdk1.3.1_02.
Did any one face this issue.
Please let me know.
Thanks,
Sridhar.

I must be a little confused regarding your question.
You can simply change your code frame.setSize(200, 200); to frame.setSize(400, 400);When you say you are unable to see the border are you specifically talking about the border of the frame or the border of the combo box?
Lance

Currency Conversion types not visible for KF in BEx report

Similar Messages

Maybe you are looking for