Currency decimal format

Hi,
I wanted to know if there is any table which stores the currency format for decimal places. for e.g some currencies use a period to indicate the decimal place while some use a comma.
if the amount is 127.54
in USD it will be 127.54
in FRF it will be 127,54
Is there any table which stores this information as to which currencies use comma and which use period.
Thanks,
Prasy

I think the decimal format is controlled by the user setting not the currency being output. For example:
REPORT ztest LINE-SIZE 80 MESSAGE-ID 00.
DATA: amt TYPE bseg-dmbtr VALUE '123.45'.
WRITE: /001 amt CURRENCY 'FRF'.
gives output for me as:
123.45
Rob

Similar Messages

Problem in currency decimal format

Hi all,
we want to display currency format 1,234,567.89
but we are getting current format as 1.234.567,89
we already maintained the required format in the USER PROFILE's DEFAULT
still we are getting this format 1.234.567,89
so is there any thing we have to set at SPRO level?
and also we have to maitain any thing more than these?
please let me know urgently
thanks in advance

Hi,
For which country are your working?
because I faced these type of problem with countries Like Japan and for some european countries etc. SO it depends on country settings also.
Make sure and do the settings in User settings.
Regards,
Anji

How to do Regional Setting Configuration in RDP session ( Eg Date Format, Currency, Decimal Seperator etc)

Hi All,
I am new to Windows Server 2008 R2 administration.
I would like to know is there a way to do Regional Setting Configuration in RDP session. i.e Date Format, Currency, Decimal Separator etc are based on users local machine.
Eg If a user from UK logs in he should see date format as DD/MM/YY and if user from US logs in he should date format as MM/DD/YY.
We are currently using citrix and we are managing this using logon script that runs based on citrix published application name.
Is there any way we can achieve the same in RDP ?
Thanks in Advance.
Thanks & Regards,
Nithin Kumar

Hi Nithin,
Do you need any other assistance?
Thanks.
Dharmesh Solanki
TechNet Community Support

Currency Decimal places

Hello Experts,
I am unsing SRM 4.0 SP13 & standalone scenario.
At present RON currency set with "No Deciamal Places" in Currency setting. Now user wants to put 2 decimals with this currency.
In SPRO -> SAP Web Application Server -> General Settings -> Currencies -> Set Decimal Places for Currencies,
If i remove the RON currency,:
1. The system will allow 2 decimal palces.
2. Is there any impact on existing documents ( i have one docuemnt in PRD system with RON currency). If yes, how we can resolve.
FYI: The present Decimal format is 1.234.567,89.
Thanks in avance for your valuble inputs.
Regards,
Suneel Kumar.

Hi
RON which country boss. help others to do help very fast? romania and russia i could see..

Currency Decimal Points - Urgent

Hi,
I am facing a serious problem with currency decimal points. Unfortunately "Currency code" has been deleted from where we can maintain currency decimal points in OY04 Tcode and the currency code was maintained by zero decimal places. Before deleting the Currency from decimal points the document currency was showing $1000.00 which is correct. But after deleting Currency Code from OY04 Tcode the same amount is showing $100000 by combining decimals.
I have again given same Currency Code in same transaction code. But still it is showing ($100000) the amount by combing the decimals.
Please help me
Thanks
Ravindra

You said someone "unfortunately" deleted an entry from table TCURX. Has that someone seen all the following WARNINGS given by SAP!!!
In a productive system, you must not delete the currencies in use or change the decimal places. This could make amounts in documents already posted incorrect or invalid.
Before you continue, please read the following text carefully. If you do not heed this note, you can cause irreparable damage to the system with this transacton. In the R/3 System tables currency fields are stored as decimal figures with a variable number of decimal places. The decimal point is not stored in the field in the database. Instead, each currency field refers to a currency key field. In this transaction you assign the number of decimal places to this currency key uniquely. Example: If you have set currency USD to have two decimal places and you post an amount of 100 USD, an amount of 10000 USD is stored in the currency field in the database. Not until this amount is processed further or is output does the system use the currency key from the reference field to determine the number of decimal places via this table. In this way the table content can be interpreted correctly for further processing or formatted for output with the correct punctuation. If after posting you changed the number of decimal places for USD, for example, to 3, the existing field content of 10000 would be interpreted for futher processing or output as 10 USD (10.000). This would mean that the contents of tables across the system would, for all currency fields containing an amount in USD, be interpreted incorrectly by 10 per cent. To
change the number of decimal places for a currency already in use, you must convert all the tables in the R/3 System that contain
currency fields, so that the data integrity remains. This cannot, however, for both organizational reasons and under the runtime aspect be carried out in a productive system. The following changes to the TCURX table can thus lead to the loss of data integrity if you
make the changes in a productive system or transport them into a productive system:
o Change to the number of decimal places of an existing currency
o Deletion of an entry from the TCURX table (corresponds to changing the decimal places to the standard value of two decimal places)
o Insertion of an entry in the TCURX (corresponds to changing the standard value of 2 decimal places to a different value), if this is a currency code that already exists Uncritical changes are any made to this table during the Customizing of a new installation or the insertion of TCURX even during operations, if the currency codes have just been entered in the TCURC table using transaction OY03, signifying that no postings to these currency codes can have been carried out yet.
Do you want to change the decimal places despite all recommendations?

Convert decimal to User Decimal format

Hi All,
I have number in this format 10.000,52.I want to change this format to my User decimal format whcih is entred in SU01.
Can anybody please help me out.
Thanks,
Swapna.

Hi Swapna,
Please go to SU01 --> Enter user id --> display --> Anc click on default tab and check the decimal notation.
Declare one field to currency type and then try
Use FM BKK_AMOUNT_CONV_TO_INTERN_MAIN.
you can check by changing the values in su01.but remember your change reflect only when you logoff SAP and again login.so once logoff is needed.
regards,
Ranveer.

Key figure Date in Decimal format

Hi all,
   I have a key figure 0CPR_ACFR_K (Date) which is in Decimal format.
   Data in PSA for the particular field was like this '07102008'
   but after that it is changing to 7327.98 that is in decimal format.
   But i dont want this to happen ie. it should not get converted to Decimal or
   i want to convert the decimal value again to the equivalent date.
   pls help in this.

Hi jean liker,
It will get converted due to its properties. If you want to use this particular object as keyfigure, you can create a variable with processing type replacement path and use. Its better to maintain as char.
[Replacement Path: Replacement with a Characteristic Value|http://help.sap.com/saphelp_nw04/helpdata/en/03/6ba03cc24efd1de10000000a114084/frameset.htm]
Hope it Helps
Srini

Loading the data from a packed decimal format file using a sql*loader.

Hi ,
In one of the project i'm working here i have to load the data into oracle table from a file using a Sql*loader but the problem is the data file is in the packed decimal format so please let me know if there is any way to do this....I search a lot regarding this ..If anybody faced such type of problem ,then let me the steps to solve this.
Thanks in advance ,
Narasingarao.

declare
f utl_file.file_type;
s1 varchar2(200);
s2 varchar2(200);
s3 varchar2(200);
c number := 0;
begin
f := utl_file.fopen('TRY','sample1.txt','R');
utl_file.get_line(f,s1);
utl_file.get_line(f,s2);
utl_file.get_line(f,s3);
insert into sampletable (a,b,c) values (s1,s2,s3);
c := c + 1;
utl_file.fclose(f);
exception
when NO_DATA_FOUND then
if utl_file.is_open(f) then utl_file.fclose(f); ens if;
dbms_output.put_line('No. of rows inserted : ' || c);
end;SY.

Convert a String to Decimal Format in European format

Hi Experts,
I am having a string as a context type for a input field, where the user can enter the Price, I need to convert the same into European format "###.###,00", I am using this below code to convert the string to decimal format
User will enter the input as 10 as it needs to be converted into 10,00. Also, 1000 which has to be converted as 1.000,00
String Str1 = wdContext.currentvn_temptable.getVa_TempUnitPrice();
Locale mylocale = Locale.GERMAN;
String pattern="###.###,00";
NumberFormat nf = NumberFormat.getNumberInstance(mylocale);
DecimalFormat df = (DecimalFormat)nf;
df.applyPattern(pattern);
String output = df.format(Str1);
wdComponentAPI.getMessageManager().reportSuccess("Unit Price" + " " + pattern + " " + output);
When I execute the above code, i am getting an error called "Malformed Pattern ###.###,00"
Please let me know, how to convert a String to Quantity in European format
Thanks & Regards,
Palani

Hello!
Try to change your pattern to this one
Locale mylocale = Locale.GERMAN;
String pattern = "#,#00.00";
NumberFormat nf = NumberFormat.getNumberInstance(mylocale);
DecimalFormat df = (DecimalFormat)nf;
df.applyPattern(pattern);
String output = df.format(1111111.222);
Pattern has an influence on number of digits between separators, but you have to use ',' for grouping and '.' for decimal. Character values for separators correspond to your Locale object.
Thanks, Mikhail

Decimal format time value to convert into time (hr:min:sec)value in a graph

I need to develop a graph in WAD, in BW7. In the graph the value must be showed as HR:MIN:SEC, which I cannot get it right.
The keyfigure value carries the duration(hr:min:sec) in decimal format. In the query, I use this keyfigure for calculation. To get the time broadcasted for a week range. I get the total duration (say 507835.000). Now I need to convert this value back to hr:min:sec. I use the below formulas to get the hr, min, sec.
D = 507835
Val1 = D/3600
Val2 = Frac(val1)
Val3 = Val2 * 60
Val4 = frac(Val3) * 60
Hr = Val1 Val2
Min = Val3 frac(Val3)
Sec = Val4
In another formula in the query I add Hr + Min/100 + Sec/10000 to get hr.minsec format.
When I do an average on count of weeks, this doesnt round off correctly.
I tried to also use the Data function TIME() which when the time is > 24 hrs changes the value.
Lets say if it is 39:00:00, it shows value as 15:00:00 instead of keeping the value 39:00:00.
When I used this value in the graph it did not show the HR:MIN:SEC values in the value axis instead it showed 0.0, 0.1,.1.0. Bcoz of this the graph is blank.
Can anybody help me to resolve this problem.
Thanks alot
Anima

I checked SU01 and didn't see anything there to customize...
In my workstation, control panel / regional and languages settings / tab regional Options / customize; my time format is HH:mm:ss; the HH has to be in capital letter to display the time in 24 hour...
but this is strange anyway... are you reporting with web frontend or excel?

DBMS_XMLSave.insertXML Fails on decimal format

DBMS_XMLSave.insertXML Fails on decimal format
The following example fails when using collections of complex elements. The error is:
java.lang.NumberFormatException: 1.0'
Example is:
create table test_parent(p_id NUMBER(18),
test_col number(10))
alter table test_parent add constraint pk1 primary key(p_id)
create table test_child(t_id NUMBER(18),
test_col number(10),
p_id NUMBER(18))
alter table test_child add constraint pk2 primary key(t_id)
alter table test_child add constraint fk1 foreign key (p_id) references test_parent(p_id)
insert into test_parent values(1,1)
insert into test_child values(1,1,1)
insert into test_child values(2,2,1)
insert into test_child values(3,3,1)
create type test_c AS OBJECT (t_id NUMBER(18),test_col NUMBER(10));
CREATE OR REPLACE TYPE test_cs AS TABLE OF test_c
CREATE OR REPLACE VIEW test_view(parent_id,parent_num,child)
AS SELECT p.P_id,
p.test_col,
CAST(MULTISET(SELECT c.t_id,
c.test_col
FROM test_child c
WHERE p.p_id = c.p_id) AS test_cs) AS child
FROM test_parent P
CREATE OR REPLACE TRIGGER test_trig INSTEAD OF INSERT ON test_view
BEGIN
DBMS_OUTPUT.PUT_LINE('Trigger proccessing');
END;
SHOW ERRORS
DECLARE
insCtx DBMS_XMLSave.ctxType;
rows number;
xmlDoc CLOB := '<ROWSET>
<ROW>
<PARENT_ID>2.0</PARENT_ID>
<PARENT_NUM>2.0</PARENT_NUM>
<CHILD>
<T_ID>1.0</T_ID>
<TEST_COL>1.0</TEST_COL>
</CHILD>
</ROW>
</ROWSET>';
BEGIN
insCtx := DBMS_XMLSave.newContext('TEST_VIEW');
rows := DBMS_XMLSave.insertXML(insCtx,xmlDoc);
DBMS_XMLSave.closeContext(insCtx);
END;
DECLARE
insCtx DBMS_XMLSave.ctxType;
rows number;
xmlDoc CLOB := '<?xml version="1.0"?>
<ROWSET>
<ROW>
<PARENT_ID>1</PARENT_ID>
<PARENT_NUM>1</PARENT_NUM>
<CHILD>
<TEST_C>
<T_ID>1.0</T_ID>
<TEST_COL>1</TEST_COL>
</TEST_C>
<TEST_C>
<T_ID>2</T_ID>
<TEST_COL>2</TEST_COL>
</TEST_C>
<TEST_C>
<T_ID>3</T_ID>
<TEST_COL>3</TEST_COL>
</TEST_C>
</CHILD>
</ROW>
</ROWSET>';
BEGIN
insCtx := DBMS_XMLSave.newContext('TEST_VIEW');
rows := DBMS_XMLSave.insertXML(insCtx,xmlDoc);
DBMS_XMLSave.closeContext(insCtx);
END;

If you have access to ON, check out document 119140.1.
Apparently it's a bug in the jdbc driver in pre-Oracle 8.1.7 databases...the workaround looks messy though.

Decimal Format and Scientific Notation

I am trying to print numbers in scientific notation using the Decimal Format class. What follows is a simple test program I wrote to find the bug. So far, I have not found a solution.
import java.text.*;
public class formatted {
public static void main (String Arguments[]) {
DecimalFormat form = new DecimalFormat("0.###E0");
double numb = 123456.789;
System.out.println("Nuber is: " +
form.format(numb));
The output of this program is... Nuber is: 123456E
The output is the same if numb is an int, float, or double. If I format the number as "#####.0" or "#####.00" the output is correct. I think that I am following the rules for formatting a number in scientific notation as the process is outlined in the documentation (provided below).
***** From Decimal Format under Scientific Notation ***
Numbers in scientific notation are expressed as the product of a mantissa and a power of ten, for
example, 1234 can be expressed as 1.234 x 10^3. The mantissa is often in the range 1.0 <= x < 10.0,
but it need not be. DecimalFormat can be instructed to format and parse scientific notation only via a
pattern; there is currently no factory method that creates a scientific notation format. In a pattern,
the exponent character immediately followed by one or more digit characters indicates scientific
notation. Example: "0.###E0" formats the number 1234 as "1.234E3".
Anyone understand how the short program is incorrectly written?
Marc

The problem is
format = "0.###E0"
input number = 123456.789
output = 123456E (not scientific notation!)
This is not scientific notation at all. There is no decimal point given and no value in the exponent.
I understand entirely that by adding more #'es will provide more precision. The bug I have is the output is not printed in the scientific format; other formats work.
MArc

Currency decimal error

Hi Team,
We have created PR in USD and released. We have converted this PR to PO in JPY currency. Net price is displaying without currency decimal in JPY currency. When we display the print preview, system is automatically considering the last two digits as decimal and in table entry also.
For example, PO total price is 68,323,120 JPY.
When we see the table (EKPO-NETWR) it is showing the value as 683,231.20 and it is displaying this value in print preview also.
When we try to maintain the values in SPRO - u201CSet Decimal Places for Currenciesu201D, it is displaying the warning message as u201CIn a productive system, you must not delete the currencies in use or change the decimal places. This could make amounts in documents already posted incorrect or invalidu201D.
Pl let me know the further process for this issue.
Thanks & Regards
R.Saravanan
09582188409

JPY does not have decimals. However, as the value field is a decimal field SAP stores the value with decimals in the tables.
But SAP knows that it has to use a certain function module to get it right before the value is shown to the user, e.g. inME23N.
The form, is more or less customized to your companies need, If it is shown with decimals in your form, then contact your developer to fix this problem in the form.

Currency Decimal Places setting restore

Hi Experts ,
Unfortunately we have changes the setting for currency decimal places in SPRO ==> SAP NETWEAVER ==>GENERAL SETTINGS ==>CURRENCIES ==>SET DECIMAL PLACES FOR CURRENCIES.
for Currency INR from default 3 decimal places to '4' decimal places, due to this the amounts entered in MM inforecords were changed e.g. the amount which was entered as 15.20 inr changed to 1520.00 inr, After getting reply from Fourm and the senior consultants we have deleted the INR currency from the about setting i.e.from table 'TCURX' after doing this the amounts get corrected i.e. from 1520.00 INR to 15.20 INR.
But again the same (adverse) change is being seen in amounts for MM Inforecords and SD Condition Records
If we enter a new record it shows the correct amount.
How can i correct the previous amounts. It has happen suddenly and what guarantees that this should not happen again.
Please give me the solution as early as possible. We have to Go-Live in next 2 days..
Thanks in advance
Amol

HI, anand,
SAP suggest never touch decimal places.
Regards,
Satish

Decimal format to 2 decimal places ????

Hello Everyone,
I have created a web dynpro application which to display a report depending on the data given by the BAPI. But there is some issue with the numeric data returned by the BAPI.
For ex - if the BAPI returns 5.00 the value is displayed in the report as 5.
I want uniform decimal values till 2 decimal places. For example 5 shd come as 5.00, 2.1 shd come as 2.10 etc.
I searched SDN abt this, and found many threads relating to this.
I tried using decimal format, creating a simple dictinary type, but using all this what happens is the value basically changes to a string format, this implies that the value is displayed in the table as "left-aligned".
Where- as we need the decimal numeric values to be right-aligned.
Any thoughts how to achieve this.
Please correct me if I have missed out on anything.
Thanks,
Samta

Hi,
From wat i understood.. u have a attribute coming from BAPI.. which you want to display with two decimal places,,
In this case.. assuming it is coming with 2 decimal places from the backend.. create a value node.. inside the node which contains the output data. set its carinality to 1..1 .. create a value attribute of type big decimal in it.. or probably string.. if there is an issue in displaying BigDecimal directly..
map this new attribute to the necessary column in the table..
BigDecimal value = new BigDecimal("the actual value in string or long").setScale(2);
assign this to the value attribute created..
(If alignment is the problem.. set the column 's textview property halign to right.. and layout as block or paragraph.. )
Regards
Bharathwaj
Message was edited by:
Bharathwaj R

Currency decimal format

Similar Messages

Maybe you are looking for