Currency Decimal Places setting restore

Hi Experts ,
Unfortunately we have changes the setting for currency decimal places in SPRO ==> SAP NETWEAVER ==>GENERAL SETTINGS ==>CURRENCIES ==>SET DECIMAL PLACES FOR CURRENCIES.
for Currency INR from default 3 decimal places to '4' decimal places, due to this the amounts entered in MM inforecords were changed e.g. the amount which was entered as 15.20 inr changed to 1520.00 inr, After getting reply from Fourm and the senior consultants we have deleted the INR currency from the about setting i.e.from table 'TCURX' after doing this the amounts get corrected i.e. from 1520.00 INR to 15.20 INR.
But again the same (adverse) change is being seen in amounts for MM Inforecords and SD Condition Records
If we enter a new record it shows the correct amount.
How can i correct the previous amounts. It has happen suddenly and what guarantees that this should not happen again.
Please give me the solution as early as possible. We have to Go-Live in next 2 days..
Thanks in advance
Amol

HI, anand,
SAP suggest never touch decimal places.
Regards,
Satish

Similar Messages

Precautions for Changing Currency Decimal Places

Hi Gurus,
I am having a requirement to change currency decimal place, which is set wrong at the time of golive.I wanted to know what are the precautions i need to take for changing the currency decimal places. As per the note at the time of changing currency decimal places, we need to check is there any transactions posted in this currency. I have checked BKPF table and no transactions are posted.
1. what are all the other tables i need to check for ensuring there is no transaction posted in that currency?
2. Is there any other place we need to do this change?
Thanks in Advance
Regards,
Giri

Dear!
We also faced this problem,But I recommend
Please do check following befor chaning the currency decimals
1- transaaction data
2-Project profile currecnt setting ( OPS9)
3- Internal order budget profile setting ( OKOB)
3- funds management profile setting ( OF12)
4- All other proifle.
5-Als0 consult with other Module team/HR
Thanks
Message was edited by:
MS

Create Currency Decimal Places

Hi Experts,
Is it possible to create our own currency decimal places? In my configuration(OY04) only available standard decimal places 1, 3,4 & 5. now I need decimal place 2. e.g. I want to show amount as 101.26
Regards
VS Rao

Hi Rao,
refer to note 137626.
Regards,
Greta

Asian (JPY) currency Decimal Places Issue

HI All,
Need your help, we have a program which creates a BDC session and when the user tries to process it it throws an errror for amount in asian currencies like JPY - no decimal places allowed for currency, in the background it calls the FBB1 transaction.
The original amount is in USD however after conversion when we store it back to amount field which is of type
"glpct-tslvt" it stores the amount in JPY currency with decimal places so for example :
USD amount = 93,214. 00
JPY amount = 115,021. 86
guess the amount is stored with decimals in BSEG table, so now when we try to process the session with the JPY amount with decimals it throws an error.
I have tried the
CALL FUNCTION 'CURRENCY_AMOUNT_SAP_TO_DISPLAY'
and
CALL FUNCTION 'BAPI_CURRENCY_GETDECIMALS'
it gives me the correct value for amount so for above example JPY amount = 115,021. 86 by using the mentioned two methods i am able to get the currency in this format 11502186.00 but still has two decimal places, i think it still will not work when we process the session for FBB1.
Need your help people, appreciate your co-operation.

sorry to revive an old thread...but we are having an issue with JPY in our electronic bank statements.
the BAI format for our JPY account has for example 900 yen which according to our finance department is really 9 yen. the bank claims this is a known issue and the BAI format documentation seems to be confirming the bank's position in that the decimals are implied according to the currency code (whatever that means in SAP terms is a bit foggy to us).....
currently we wrote a custom code to suppress the last two zeros (when they are zeros) but i feel this error is caused either by a wrong setting in our currency or translation tables in SAP or something else since our feeling is that this should work right out of the box without any custom programming...any ideas???...where we shoudl start looking in our currency config....does the 100:1 or 1:1 translation ratio between JPY/USD make any difference...should we try and use a function module to convert the currency ...any ideas or hints are welcome
thanks
Ram
[email protected]

Currency Decimal places

Hello Experts,
I am unsing SRM 4.0 SP13 & standalone scenario.
At present RON currency set with "No Deciamal Places" in Currency setting. Now user wants to put 2 decimals with this currency.
In SPRO -> SAP Web Application Server -> General Settings -> Currencies -> Set Decimal Places for Currencies,
If i remove the RON currency,:
1. The system will allow 2 decimal palces.
2. Is there any impact on existing documents ( i have one docuemnt in PRD system with RON currency). If yes, how we can resolve.
FYI: The present Decimal format is 1.234.567,89.
Thanks in avance for your valuble inputs.
Regards,
Suneel Kumar.

Hi
RON which country boss. help others to do help very fast? romania and russia i could see..

Currency Decimal Places - Urgent

Hi all of you..
When earlier stage in my project , client has not told us to change the decimal places in Foreign Currency - USD.
Now client is asking to change the decimal places for 4 digits..
( Earlier 2 decimals )
Now in Global settings t.code OY06 , we are trying to change for 4 decimals , but system is changing the entire existed transaction values regd USD as for 4 decimals , data inconsistency is coming.
Is there any procedure to change the decimal places from now onwards...
Or else is there any procedure to get 4 decimals in PO..
Plss help me it is very urgent to me ..we are trying to shoot from 10 days..
Thanks & Regards
Ramki

Please read OSS note 434349 - Change of decimal places of currencies
it has instructions for your case

JPY Currency Decimal Places

Hi All
Today we noticed a difference in the way SAP handles a PO which has document currency JPY. The price displayed on screen for the PO was 790 JPY, but the value stored in the tables was 0.79. Any reason why this like this ? How does standard SAP handles such cases ?
Regards
Kasi

Hi
There are certain currencies like JPY/Yen for which amounts are automatically handled by SAP. Currency JPY has 0 decimals. Refer TCURX table for the details of decimal places for currencies.
In the case of JPY, system automatically multiplies values when displayed from table to screen and divides vice versa.
FM 'CURRENCY_AMOUNT_SAP_TO_DISPLAY' is used for this conversion.
Amount 7900 JPY on screen will be stored as 79 in SAP tables.
Also, in the case of exchange rate conversions, the rate maintained are for 1:100 to USD (ex). while other currencies would hold 1:1 conversion rate.
You can also check with FI consultants for more details
Thanks
E.Avudaiappan

Decimal Place for Percentage

Hi,
Where do we change the number of decimal places for percentage? Currently it is set as 3places. (e.g. 1.234% change to 1.2345%)
Thanks,

Hi Shiva,
As for the link you gave, we don't want to change the currency decimal place. We only want to change the number of decimals shown in a percentage value. (such 1.2345% instead of 1.234%)
Thanks,

U261B An Issue due to 3 Decimal Places in Percentage - Help Required

I've an Issue in BEX report output, which is like when I try to create a 'Percentage' computation on a Key Figure Value, I'm getting 3 decimal places as 'default' output.
The 'Calculations' settings I made for this KF is
> Calculate Result as ... Nothing Defined
> Calculate Single Values as .... Normalize According to Next Group Level Result
> [✔] Apply to results
> Calculation Direction - Along Rows
☹ I ran SAP_RSADMIN_MAINTAIN and set object 'IGNORE_T006_ANDEC' to the value 'X' - Not woking! Should I choose Update/Insert/Delete??
☹ T006-ANDEC & T006-DECAN for '%' has 0 decimal places only. Am I checking the correct stuff?
☹ OSS note 866505 not helpful for my issue. BW 7.0 Stack
I'm getting my output as expected, but the only worrying factor is 3 decimal places due to the 'Calculations'. I'm unable to resolve using existing methods. Should I raise an OSS Note for this?
Please help...

Hi, I posted a message to SAP on this topic and got an explanation - it is a behaviour that cannot be changed in certain cases:
it is the known design that it is always displayed with three decimal
places for normalized values and the setting in Query Designer for
decimal place doesn't take effect. This is because that normalization
changes the number dimension of this structure element.
You may refer to below notes about more details.
> 869135 Decimal places and scaling for "Calculate Single Values As"
You cannot set the number of decimal places or the scaling for some
columns or structural components.
For 2: Some "Calculate As" functions change the number dimension of a
KID. In this case, the scaling and the number of decimal places set for
the KID are no longer relevant. In this case, the system ignores the
original setting and selects a setting that corresponds to the new
number dimension. This cannot be overwritten. The following functions
are affected:
Calculate Single Values as Scale to Result, Overall Result or Query
Result: Scaling 1 and three decimal places.
> 501930 Number of decimal places setting is not applied
As a result, normalized values resulting from the list calculation are
displayed with three decimal places and without scaling by default.
best regards, thom

Rounding Rule upto 3 Decimal Places in Tax Condition(SABRIX)

Hi,
We are Using SABRIX for Tax determination and need to round up Condition Type XR1- XR6 to round upto 3 Decimal Places.
Do we need to To Change ALT Calc Type- 301306or Alt Cond Base Value -- 16 or have to change Currency decimal Places in transaction OY04/OY03.
Kindly Suggest.
Thanks
Amit

Hi,
Tax % for customer is decided in SABRIX, Where does TaX calculated?? In SABRIX or in SAP.
Thanks
Amit
Edited by: AMIT GUPTA on Mar 31, 2010 10:54 AM

Decimal Place settings for 'Total' field in Marketing documents.

Dear sir,
I'm Using SAP B1 2005B Patch Level 5
I want to know which Decimal places setting i have to set for'Total'
Field in all Marketing documents.I want to know whether it come's under
Prices settings or Amounts setting.

Jambulingam,
The no. of decimals is set in the Administration -System Initialisation - General settings - Display tab . There on the left hand side you can see the settings for decimals.
Since it is a total you wil have to set it for Amounts.
Nagesh

How to set two decimal places in currency inr

hi,
i want to set two decimal places for my co.code currencu inr. In t-code oy04 there is no 2 decimal places. Please tell me how set decimal places so that amount in account balances should be in two decimal places.
thanks
amol

Hello,
If your currency code entry isn't in OY04 customizing step, your currency code has 2 decimal place automaticly. If you want to define a special decimal place without "2", you must define it in OY04.
Regards,
Burak

PO print preview displays incorrect setting in decimal places

Dear Experts
Please help me on the following condition.
I have a problem in print preview of a PO. It displays the incorrect setting for decimal place in currency.
It shows USD 1.404,00 whereby the amount should be USD 1,404.00
This only happens to a certain vendor that is doing PO for the first time from that country
Example:
I'm creating a PO for vendor 123. Vendor 123 is located in country A. No PO has been created for any
vendor in country A before. When I saved my PO, in print preview, the decimal setting is not correct.
But when I'm creating another PO, for vendor 234. Vendor 234 is located in country B. There have been
several POs created for vendors in country B before. When I saved my PO, in print preview, the decimal
setting is correct.
Both vendor 123 and vendor 234 is using currency of USD.
Is there any other setting with the vendor master in regard with the currency decimal setting for each
country for the vendor? Or something that I've missed out?
Diagnosis:
I've checked with the user profiles->default-> decimal notation. It displays 1,234,567.89 correctly
I've also run OY04, but the decimal setting is correct.
Thank you
Regards
Syukri

this has nothing to do with print preview, it is just basic country setting (OY01) how a quantity and value is written on a PO to a vendor is country xyz.
German uses to comma to seperate decimals, while USA uses the point to seperate decimals
this would be the German version 1.404,00, and this the US version:: 1,404.00
so if an American sends a PO to a German vendor, then the document will show 1.404,00 so that the German can understand that he wants 1404. (and not 1000 times less)

Decimal places for JPY currency in change documents

Hi Gurus,
For opportunities in SAP GUI the change documents for JPY show incorrect numbers.
The number is divided by 100 (two decimal places added).
Checked the CDPOS table and found the values already divided (two decimal places added).
SPRO->General Settings->Currencies->Set decimal places for currencies is set for 0 decimals for JPY.
Is there any way I can get correct values in the change documents?
Please advice. Any hint is useful.
Thx,
Martin Kuma

Hi Naren,
Thank you for the tip, however the TCURX table is changed via customizing and should be changed only during the system initialization.
What I would like to do, is to assure that the system displays the values in change documents correctly. It should apply the currency conversion for the data displayed the same way it does for all the tables.
Do you have any idea, how should I do this?
Regards,
Martin Kuma

Decimal places in currencies from flat files

Hi experts,
I am facing a problem in the way BI is managing decimal places when I extract them from tex files. I have read a lot of post and make a lot of changes and the problem persits. Here is my problem. I am uploading data from text files. These files come from 6 different source systems. All developments are already in production so changing the way they send the data it would be the most expensive solution at this point.
For all currencies ratios I receive in the file could contain these 3 kind of values:
5.45
3.2
4
Decimal indicator is "." but it is not always present and sometimes is follow 1 decimal pla or 2, which is ogial to expect depending of the nature of the value. I haven't been able to make it work for all the cases.
I have set "." in RSCUSTV1 as decimal separator. I tried number format "direct entry" in the extraction Tab of data source. I have tried all possible combinations in the tab fields with data type CURR, DEC, even CHAR and Internal or External format, and any configuration I have made works only for some cases and not for the others. I don't know what else I can look at. Your help will be highly appreciated and rewarded with points.
Regards,
Raimundo Alvarez

HI guys and Thanks for your help.
I could solve my problem. There were some issues already fixed (a combination of the external property in the tab fields, the configuration for decimal separator and a problem with the currency). The main one was giving me the headache that I am trying to import a currency but I was not receiving the currency from the source because is always the same (Colombian Pesos). This one has an special configuration in table TCURX that was making the decimal places be wrong. I solved requesting the currency from the source even if it was a constant value.
Thanks for your help,
Rai.

Currency Decimal Places setting restore

Similar Messages

Maybe you are looking for