Currency & Exchange rates

Hi,
We are in SRM 4.0. Running clssic scenario.
I have scheduled these 2 reports "BBP_GET_CURRENCY" and "BBP_GET_EXRATE" and also executed the job. Initially the data is updated, but it was missing with the xprimary flag entry in TCURC table. For this we hav implemented Note "835619" and after that the job fails with a dump with error "ORA-01654: unable to extend index SAPR3.DBTABLOG~TAB by 2560 in tablespace PSAPPROTI" 
Has anybody faced this solution? Could you please provide some information to overcome this?
Regards,
Chary

Hi Chary.
The message points to a specific issue with the Oracle database and the inability due to space issues for extending the table, so I suggest you open a thread in the Basis area for assistance. I cannot move this thread to the SAP for Oracle forum so best to create a new one.
Regards,
Jason
Edited by: Jason Boggans on Mar 11, 2010 3:37 PM

Similar Messages

  • How to Add a parameter of currency exchange rate in the selection screen

    Dear Friends,
    How to Add a parameter of currency exchange rate in the selection screen with format (9999.99999). wich field i need to take.
    Thanks,
    Sridhar

    TCURR-UKURS.
    ~Suresh

  • Different currency exchange rate at time of sales order and invoicing

    Hi Friends,
    Actually,we are facing a crucial problem in Export where we would like to have the current currency exchange rate to be applicable both at excise and commercial invoice.
    Regards,
    Praveen

    Hi Ankur,
    Thanks for your reply.But our problem is sales order,exchange rates are defined with M type in OB08 as u have said.However when the periods are different for order entry and invoice generation we are facing the following problem.Orders are at old exchange rates and excise invoice is getting generated at current exchange rate.This is resulting in value difference between commercial invoice and excise invoice.
    Please help.
    Regards,
    Praveen

  • Currency exchange rate differences in rebate agreement settlements

    Hi Experts,
    My customer has issue in Rebate agreements and final settlements.
    ISSUE:
    Rebate agreement currency is EUR
    Billing document currency is EUR
    Company code currency is SEK
    Initially ( Before final settlement)
    The accrual amount in sales volumen 3151.05 EUR
    the accrual amount in drill down 3152.05 EUR
    After Final settlement
    The accrual amount in sales volumen 2.62 EUR
    the accrual amount in drill down 3152.05 EUR
    The accounting documents shows after final settlement
    customer A/c 3151.98 EUR credit
    Expenses A/C 3151.98 EUR debit
    Accrual A/c 3149.43 EUR debit
    Expenses A/C 3149.43 EUR credit
    The difference of 2.55 EUR is due to currency differences.
    there is no retrospective rabte processing .
    Kindly give your expertise resolve the issue of currency exchange rate difference in customer currency.
    Immediate response is highly appriciated
    Thanking you
    With regards
    Murali
    Message was edited by:
            Murali Krishna Lanka
    Message was edited by:
            Murali Krishna Lanka

    HiI
    f you set this selection field then the settings in the ERD Setting column for this currency type are no longer relevant. The system calculates and posts exchange rate differences between order-related goods receipts and invoices not just for materials with standard price, but also for:
    Materials with moving average price
    Account-assigned transactions
    Planned delivery costs
    The valuation of the inventories or consumption is effectively done at the exchange rate for the goods receipt, and not at the exchange rate of the invoice. When you post the good receipts, the fixed exchange rate from the purchase order is not used, but the translation of the purchase order values to local currency is always done at the posting date of the goods receipt.
    If you are using the material ledger with actual costing, the system does not include the posted exchange rate differences at period-end closing in the actual prices of the materials.
    Regards
    Antony

  • To maintain foreign currency exchange rates

    Hi,
    Please help me with this scenario.
    I want to maintain  foreign currency exchange rates.Kindly tell me the process to maintain these rates. and also please tell me that is their any feasibility to maintain exchange rates on daily basis.
    Regards,
    Pavani reddy

    Hello,
    you can also use currency worklists in order to maintain exchange rates on daily basis. In order to enable this functionality you have to maintain the following configuration:
    1) Define Currency Worklist using the following path: SAP Netweaver - General Setting - Currencies - Define Worklist for Exchange Rate Entry (specify the name of the worklist, short description and maintenance interval);
    - assign exchange rate to the worklist using the following path: SAP Netweaver - General Setting - Currencies
    2) Assign Exchange Rate to the Worklist (please specify your exchange rate type, from and to currencies, the name of the worklist previously created as well as quotation type).
    3) In order to maintain exchange rates you will have to use t-code TCURMNT (you can also find this transaction under standard SAP Menu (Fin. Accounting - GL - Environment - Current Settings - Enter Exchange Rates using a Worklist).
    In my opinion, this t-code is more user-friendly than the standard OB08. But it's now up to you to decide whichever to use.
    Best regards,
    The Wirtschaftsmann

  • Maintain foreign currency Exchange rates

    HI Sap Experts,
    Maintain foreign currency Exchange rates , whether it is month end activity or year end activity.
    for this what is the t/code what are the parameters are need to be given.
    Regards,
    Prabhakar

    Prabhu,
    At the very minimum, this is monthly activity ... however, if the company has large volume of transactions in foreign currency, then these rates are typically maintained on daily basis.
    You can maintain exchange rates for relevant currency pairs using T. Code S_BCE_68000174. Corresponding configuration tasks are in IMG under NetWeaver General Settings.
    HTH,
    Manish Patel
    Sr. SAP Solutions Consultant

  • Currency exchange rate

    I, have a question regarding the Currency exchange rate.
    We have a total of 20 -25 different local currency data records in R/3.
    In BW reprot we need to convert all these local currency to CDN.
    Can anyone suggest me how to do it and anylinks that would help me, please help me as i am new to BW.
    thanks
    SAM

    You can set the translation directly in the query and BW calulates the conversion at runtime. Obvious you must specify the type of exchange rate, the date of reference, and so on...
    In the BEx Analyzer, there are two possibilities for handling different currencies :
    1 Definition of a currency translation per key figure in the query definition
    2 Ad hoc currency translation in the Workbook (after having executed the query)
    You can find here some info:
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a682de07211d2acb80000e829fbfe/content.htm
    https://www.sdn.sap.com/irj/sdn/advancedsearch?searchpluginname=sdn_library_adv
    Here you can find the following:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/287bab90-0201-0010-f48e-cc55b0cd13d0
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e473ab90-0201-0010-22ac-fdd925cac167
    Hope this helps...

  • Currency Exchange rate maintenance

    Hi all FI Master,
    My local currency is in GBP. I maintain foreign currency exchange rate like USD to GBP, SGD to GBP and so on. My question is do I need to maintain the exchange rate in the other way round (like GBP to USD)?
    Secondly, if my vendor bill me is foreign currency USD, and I pay in foreign curr SGD, do I need to maintain the exchange rate from SGD to USD?
    Thank you.

    Hi Cire,
           The Answer depends on your settings for the Exchange rate type
    (SPRO > General Settings > Currencies > Check exchange rate types)
       1)    No if  Invert flag is set for the exchange rate type.
              Yes if flag is not set.
       2)    No if you have specified GBP as the Ref.crcy.
              Yes if no Ref.Crcy is specified.
    Kind regards

  • Package/class which gives currency exchange rates

    Is there any package /class in Java which gives the current currency exchange rate ? If not how can this be achieved?

    you'll have to find an online provider of that information and write code
    to subscribe to the information. Up to the minute rates will probably cost you as well.

  • Currency Exchange Rate Table

    Dear Experts,
    One of SAP our user edited the maintained currency exchange rate table (F-62) but he is lying. Now how can I check who edit the table in a particular date? Is there any t-code or way?
    Thanks in advance for this help.
    Best Regards.
    Ripon Kumar Paul

    Hi:
         If change log is enabled by your BASIS guy then you can see it menu...utilities...Change log.
         Regards

  • Display currency exchange rates

    OC41 seems to always default to a "change" mode.
    Auditors are unhappy.
    I need to see the data, but I do not want to change the data
    Is there a separate transaction for display only?
    If not -  suggestions??
    Thanks
    Althea

    There are three T Codes for currency exchange rates - OC41, OB08 and S_BCE_68000174.  Give your users authorization (display only - your Basis/Security team should help you with this) to any of these T Codes.
    Some more T Codes for the same transaction - OKUS, F-62
    Edited by: Srikanth Tamma on Apr 30, 2008 12:13 PM

  • Replicating currency exchange rates

    In SRM, table TCURR lists the currency exchange rates. When replicating the exchange rates from R/3 to SRM using program BBP_GET_EXRATE, it'll ask me for a logical system. However, when viewing TCURR, logical system information is not displayed.
    Since my SRM system is connected to two R/3 systems, it seems that after replicating exchange rates from the second R/3 system, TCURR is replaced with rates from the second R/3 and rates from the first system have been overwritten. TCURR in SRM looks identical to TCURR in the second R/3 system and not the first R/3 system.
    Is it so because it's assumed that exchange rates are universal and they should be the same regardless of which R/3 system they come from? Or am I missing something?
    Thanks,
    SN

    The program BBP_GET_EXRATE is used to replicate the currency rates from the backend system to the SRM system. The currency table is TCURR, as you explained.
    The reason why this program BBP_GET_EXRATE asks for the logical system is that, there could be more than backend system connected the SRM for business reasons. When you choose a logical system, the RFC destination of the logical system is found by the program and this RFC destination is used to call the function module 'SBIC_EXRATE_TRANSFER' in the respective R3 system.  This function module will be in the respective backend system and gives the data of the TCURR table with it.
    There will be a call to 'SBIC_CURRENCIES_TRANSFER' in the backend system based on the RFC destination determined.
    The currency rates independent of the backend system should be the same as it is universal, so you can maintain only one currency conversion for a pair of currencies.
    Please reward points if you find it useful. Thanks

  • Currency Exchange rates replication

    Hi all,
    We have a requirement where we maintain currency exchange rates in ERP and want CRM to use them rather than creating them afresh in CRM. Are there are middleware customizing objects that can be used to transfer the currency exchange rates between R3 and CRM.
    Thanks & Regards,
    Karthik

    Hi,
    Currency exchange rates (in R/3 table TCURR) can be replicated
    from R/3 to CRM via customizing object DNL_CUST_BASIS3.
    I hope this information is helpful!
    Regards, Gerhard

  • ECM: Global Compensation - Currency Exchange Rate

    Has anyone implemented ECM for multiple countries? If so, what currency exchange rate type did you use?
    Standard SAP uses exchange rate type 'M'. I'm aware that this is hard coded but my client would like to use rate type 'P'.
    I would like to know if anyone else has run into this issue and what other clients have done to resolve it.
    Thanks
    Tony

    You might want to check the OSS Note# 901896 & see if that can be of any help..
    ~Suresh

  • "Program for Currency Exchange rate updatein SAP"

    HI All,
    PLease provide me with the Program name for Currency exchange rate update.
    Thanks & Regards
    Harish

    HI
    You can use Program RSIMPCURR to automate.
    This program update the TCURR table everyday with correct exchange rate.
    Thanks
    Ranjith

  • Unknown currency exchange rate ???

    In invoice i have 2 items.
    the price (PR00) of one of them is OK.
    the other has a mistake in its price (PR00).
    all the details (dates...) are the same in the 2 items.
    the problematic item:
    price of 1.98 ILS, OTY=9000, currency exchange rate is 4.20400.
    the result is 74,880. it should be 74,915.28... (1.9890004.20400).
    why the result is wrong?
    [the currency exchange rate at the pricing date of the invoice is 4.20400.
    the culculation of the 74,880 used the currency exchange rate 4.20202 - which does not exist in the currency exchange rate table.]
    thanks

    Hi:
    I hope that you can see it from table TCURR. In this table you can select the FCURR (begin curr), TCURR(translated curr) GDATU (inverted date. 99999999 - youdate). The exchange rate is reflected in the field UKURS.
    Regards.

Maybe you are looking for

  • How to build an 8.5 report where a single source repeats with each piece of data

    I don't really know how to characterize this problem or if there is a short-hand for the type.  Here is my dilemma: I have a SQL table of tracking numbers which is custom to our version of Dynamics.  The table contains both orders and invoices.  Each

  • IDOC HRSM_D External System / Deletion of vacancies failed

    Hi, we are using IDOC HRSM_D01 Upload Time Data to send HR vacancy data from an external system to SAP HCM. It should update Infotype 2001 with vacancy type 0100. This works fine. Data are sent via PI / IDOC and inbound processing through code HRSM_D

  • HT2534 is this outdated or just me ???

    where is the "none" i'm 12 years old and i dont have a credit card and i dont think my dad would let me use his !!!

  • User log / tcode activities

    need help to track user activity / log, is there any way that I can track user activities, transaction code they use in the past 6 months? How long and when they log into the system.

  • DiskWarrior not fixing things

    I put new ram in my G5 last month. Things were fine until a couple days ago. I started getting kernel panics and was unable to run superduper because of bad permissions. Diskutility was unable to fix persmissions. So I bought DiskWarrior and removed